File content as of revision 0:353c78110e44:

//-----------------------------------------------------------------------------
// a sample mbed library to play back wave files.
//
// explanation of wave file format.
// https://ccrma.stanford.edu/courses/422/projects/WaveFormat/

// if VERBOSE is uncommented then the wave player will enter a verbose
// mode that displays all data values as it reads them from the file
// and writes them to the DAC.  Very slow and unusable output on the DAC,
// but useful for debugging wave files that don't work.
//#define VERBOSE


#include <mbed.h>
#include <stdio.h>
#include <wave_player.h>


//-----------------------------------------------------------------------------
// constructor -- accepts an mbed pin to use for AnalogOut.  Only p18 will work
wave_player::wave_player(AnalogOut *_dac)
{
    wave_DAC=_dac;

    wave_DAC->write_u16(32768);        //DAC is 0-3.3V, so idles at ~1.6V
    verbosity=0;
    volumeMod=0;
}
int * wave_player:: getVolumeMod() 
{

        return & volumeMod;

    }

//-----------------------------------------------------------------------------
// if verbosity is set then wave player enters a mode where the wave file
// is decoded and displayed to the screen, including sample values put into
// the DAC FIFO, and values read out of the DAC FIFO by the ISR.  The DAC output
// itself is so slow as to be unusable, but this might be handy for debugging
// wave files that don't play
//-----------------------------------------------------------------------------
void wave_player::set_verbosity(int v)
{
    verbosity=v;
}

//-----------------------------------------------------------------------------
// player function.  Takes a pointer to an opened wave file.  The file needs
// to be stored in a filesystem with enough bandwidth to feed the wave data.
// LocalFileSystem isn't, but the SDcard is, at least for 22kHz files.  The
// SDcard filesystem can be hotrodded by increasing the SPI frequency it uses
// internally.
//-----------------------------------------------------------------------------
void wave_player::play(FILE *wavefile,bool *ptr)
{
    unsigned chunk_id,chunk_size,channel;
    unsigned data,samp_int,i;
    short unsigned dac_data;
    long long slice_value;
    char *slice_buf;
    short *data_sptr;
    unsigned char *data_bptr;
    int *data_wptr;
    FMT_STRUCT wav_format;
    long slice,num_slices;
    DAC_wptr=0;
    DAC_rptr=0;
    for (i=0; i<256; i+=2) {
        DAC_fifo[i]=0;
        DAC_fifo[i+1]=3000;
    }
    DAC_wptr=4;
    DAC_on=0;

    fread(&chunk_id,4,1,wavefile);
    fread(&chunk_size,4,1,wavefile);
    while (!feof(wavefile)) {
        if (verbosity)
            printf("Read chunk ID 0x%x, size 0x%x\n",chunk_id,chunk_size);
        switch (chunk_id) {
            case 0x46464952:
                fread(&data,4,1,wavefile);
                if (verbosity) {
                    printf("RIFF chunk\n");
                    printf("  chunk size %d (0x%x)\n",chunk_size,chunk_size);
                    printf("  RIFF type 0x%x\n",data);
                }
                break;
            case 0x20746d66:
                fread(&wav_format,sizeof(wav_format),1,wavefile);
                if (verbosity) {
                    printf("FORMAT chunk\n");
                    printf("  chunk size %d (0x%x)\n",chunk_size,chunk_size);
                    printf("  compression code %d\n",wav_format.comp_code);
                    printf("  %d channels\n",wav_format.num_channels);
                    printf("  %d samples/sec\n",wav_format.sample_rate);
                    printf("  %d bytes/sec\n",wav_format.avg_Bps);
                    printf("  block align %d\n",wav_format.block_align);
                    printf("  %d bits per sample\n",wav_format.sig_bps);
                }
                if (chunk_size > sizeof(wav_format))
                    fseek(wavefile,chunk_size-sizeof(wav_format),SEEK_CUR);
                break;
            case 0x61746164:
// allocate a buffer big enough to hold a slice
                slice_buf=(char *)malloc(wav_format.block_align);
                if (!slice_buf) {
                    printf("Unable to malloc slice buffer");
                    exit(1);
                }
                num_slices=chunk_size/wav_format.block_align;
                samp_int=1000000/(wav_format.sample_rate);
                if (verbosity) {
                    printf("DATA chunk\n");
                    printf("  chunk size %d (0x%x)\n",chunk_size,chunk_size);
                    printf("  %d slices\n",num_slices);
                    printf("  Ideal sample interval=%d\n",(unsigned)(1000000.0/wav_format.sample_rate));
                    printf("  programmed interrupt tick interval=%d\n",samp_int);
                }

// starting up ticker to write samples out -- no printfs until tick.detach is called
                if (verbosity)
                    tick.attach_us(this,&wave_player::dac_out, 500000);
                else
                    tick.attach_us(this,&wave_player::dac_out, samp_int);
                DAC_on=1;

// start reading slices, which contain one sample each for however many channels
// are in the wave file.  one channel=mono, two channels=stereo, etc.  Since
// mbed only has a single AnalogOut, all of the channels present are averaged
// to produce a single sample value.  This summing and averaging happens in
// a variable of type signed long long, to make sure that the data doesn't
// overflow regardless of sample size (8 bits, 16 bits, 32 bits).
//
// note that from what I can find that 8 bit wave files use unsigned data,
// while 16 and 32 bit wave files use signed data
//
                for (slice=0; slice<num_slices; slice+=1) {
                    if(*ptr==0)
                        break;
                    fread(slice_buf,wav_format.block_align,1,wavefile);
                    if (feof(wavefile)) {
                        printf("Oops -- not enough slices in the wave file\n");
                        exit(1);
                    }
                    data_sptr=(short *)slice_buf;     // 16 bit samples
                    data_bptr=(unsigned char *)slice_buf;     // 8 bit samples
                    data_wptr=(int *)slice_buf;     // 32 bit samples
                    slice_value=0;
                    for (channel=0; channel<wav_format.num_channels; channel++) {
                        switch (wav_format.sig_bps) {
                            case 16:
                                if (verbosity)
                                    printf("16 bit channel %d data=%d ",channel,data_sptr[channel]);
                                slice_value+=data_sptr[channel];
                                break;
                            case 32:
                                if (verbosity)
                                    printf("32 bit channel %d data=%d ",channel,data_wptr[channel]);
                                slice_value+=data_wptr[channel];
                                break;
                            case 8:
                                if (verbosity)
                                    printf("8 bit channel %d data=%d ",channel,(int)data_bptr[channel]);
                                slice_value+=data_bptr[channel];
                                break;
                        }
                    }
                    slice_value/=wav_format.num_channels;

// slice_value is now averaged.  Next it needs to be scaled to an unsigned 16 bit value
// with DC offset so it can be written to the DAC.
                    switch (wav_format.sig_bps) {
                        case 8:
                            slice_value<<=8;
                            break;
                        case 16:
                            slice_value+=32768;
                            break;
                        case 32:
                            slice_value>>=16;
                            slice_value+=32768;
                            break;
                    }
                    dac_data=(short unsigned)slice_value;
                    if (verbosity)
                        printf("sample %d wptr %d slice_value %d dac_data %u\n",slice,DAC_wptr,(int)slice_value,dac_data);
                    DAC_fifo[DAC_wptr]=dac_data;
                    DAC_wptr=(DAC_wptr+1) & 0xff;
                    while (DAC_wptr==DAC_rptr) {
                    }
                }
                DAC_on=0;
                tick.detach();
                free(slice_buf);
                break;
            case 0x5453494c:
                if (verbosity)
                    printf("INFO chunk, size %d\n",chunk_size);
                fseek(wavefile,chunk_size,SEEK_CUR);
                break;
            default:
                printf("unknown chunk type 0x%x, size %d\n",chunk_id,chunk_size);
                data=fseek(wavefile,chunk_size,SEEK_CUR);
                break;
        }
        fread(&chunk_id,4,1,wavefile);
        fread(&chunk_size,4,1,wavefile);
    }
}


void wave_player::dac_out()
{

    if (DAC_on) {
#ifdef VERBOSE
        printf("ISR rdptr %d got %u\n",DAC_rptr,DAC_fifo[DAC_rptr]);
#endif

        wave_DAC->write_u16(DAC_fifo[DAC_rptr] * (16 - volumeMod)>>4);

        DAC_rptr=(DAC_rptr+1) & 0xff;
    }
    

}