zain aftab / mbed-src

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of mbed-src by mbed official

Diff: targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h

Revision:
587:dfaf40375987
Parent:
512:532f83b66a7f
--- a/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h	Wed Jul 08 14:45:08 2015 +0100
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_C029/PinNames.h	Wed Jul 08 15:00:09 2015 +0100
@@ -126,7 +126,7 @@
     P_A17   = PD_12,  // GPIO-3
     P_A18   = PA_3,   // UART-DSR
     // B
-    // C
+	  // C
     P_C5    = PG_4,   // SPI-IRQ
     P_C6    = PE_13,  // SPI-MISO
     P_C8    = PE_12,  // Res
@@ -139,7 +139,7 @@
     P_C16   = PF_7,   // GPIO-7
     P_C17   = PF_1,   // I2C-SCL
     P_C18   = PF_0,   // I2C-SDA
-    // D
+	  // D
     P_D1    = PB_12,  // RMII-TXD0
     P_D2    = PB_13,  // RMII-TXD1
     P_D3    = PB_11,  // RMII-TXEN
@@ -152,27 +152,28 @@
     P_TP7   = PA_13,  // TMS  SWDIO
     P_TP8   = PA_15,  // TDI
     P_TP9   = PA_14,  // TCK  SWCLK
-    P_TP10  = PB_3,   // TDO  
+    P_TP10  = PB_3,   // TDO 
+    //P_TP11,         // BOOT0 		
 
     // Board Pins
     // A0-A5
-    A0      = PF_7,
-    A1      = PF_6,
-    A2      = PA_3,
-    A3      = PC_2,
+    A0      = PF_6,  // AI4
+    A1      = PA_3,  // AI3
+    A2      = PC_2,  // AI12
+    A3      = PF_7,  // LPOCLK, not AI
     A4      = PG_4,  // not AI
     A5      = PB_3,  // not AI
     // D0-D15
-    D0      = PD_9,   // RX
-    D1      = PD_8,   // TX
-    D2      = PA_10,  // RX
-    D3      = PA_11,
-    D4      = PA_12,
+    D0      = PD_9,   // UART3-RX
+    D1      = PD_8,   // UART3-TX
+    D2      = PA_10,  // UART1-RX
+    D3      = PA_11,  // CAN1-RX
+    D4      = PA_12,  // CAN1-TX
     D5      = PA_15,
-    D6      = PD_11,
-    D7      = PD_12,
-    D8      = PA_9,   // TX
-    D9      = PE_9,   // shared with SW1
+    D6      = PD_11,  // UART3-CTS
+    D7      = PD_12,  // UART3-RTS
+    D8      = PA_9,   // UART1-TX
+    D9      = PE_9,   // SDCard-CS
     D10     = PE_11,  // SSEL
     D11     = PE_14,  // MOSI
     D12     = PE_13,  // MISO
@@ -180,16 +181,17 @@
     D14     = PF_0,   // SDA
     D15     = PF_1,   // SCL
     // Internal
-    LED1    = PE_0,   // Red
-    LED2    = PB_6,   // Green / shared with SW1
-    LED_RED = PE_0,   // Red
-    LED_GRE = PB_6,   // Green / shared with SW1
+    LED_RED = PE_0,   // Red / Mode
+    LED_GRE = PB_6,   // Green / Switch-1
     LED_BLU = PB_8,   // Blue
-    SW0     = PF_2,	  // Switch 0
-    SW1     = PB_6,   // Switch 1 / shared with LED_GRE
-    SDCS    = PE_9,   // SD Card CS / shared with D9
-    USBRXD  = PD_9,   // RX
-    USBTXD  = PD_8,   // TX
+    SW0     = PF_2,   // Switch-0
+    SW1     = PB_6,   // Green / Switch-1
+    // ST-Link
+    USBRXD  = PD_9,
+    USBTXD  = PD_8,
+    SWDIO   = PA_15, 
+    SWCLK   = PA_14, 
+    NTRST   = PB_4,  
 
     // Not connected
     NC = (int)0xFFFFFFFF