雄介 太田
mbed(SerialHalfDuplex入り)
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F103RB/stm32f1xx_hal_gpio.h
- Revision:
- 96:487b796308b0
diff -r 7e07b6fb45cf -r 487b796308b0 TARGET_NUCLEO_F103RB/stm32f1xx_hal_gpio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F103RB/stm32f1xx_hal_gpio.h Tue Mar 17 14:27:45 2015 +0000
@@ -0,0 +1,324 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 15-December-2014
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_GPIO_H
+#define __STM32F1xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */
+#define GPIO_SPEED_HIGH (GPIO_CRL_MODE0) /*!< High speed */
+
+/**
+ * @}
+ */
+
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Macros
+ * @{
+ */
+
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || \
+ ((SPEED) == GPIO_SPEED_MEDIUM) || ((SPEED) == GPIO_SPEED_HIGH))
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/* Include GPIO HAL Extension module */
+#include "stm32f1xx_hal_gpio_ex.h"
+
+/**
+ * @}
+ */
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *******************************/
+/** @addtogroup GPIO_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+ * @{
+ */
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/* IO operation functions *******************************************************/
+/** @addtogroup GPIO_Exported_Functions_Group2
+ * @{
+ */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/