雄介 太田 / mbed

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of mbed by mbed official

TARGET_UBLOX_C027/PinNames.h@81:7d30d6019079, 2014-03-19 (annotated)

Committer:
bogdanm
Date:
Wed Mar 19 18:28:32 2014 +0000
Revision:
81:7d30d6019079
Parent:
77:869cf507173a 
Release 81 of the mbed library



Main changes:



- Updates and fixes for many targets

- LPC1768: serial interface code fixes

- nRF51822 targets now output a .hex file

- More exporters

- More flexible GPIO API

Who changed what in which revision?

UserRevisionLine numberNew contents of line
emilmont 77:869cf507173a 1 /* mbed Microcontroller Library
emilmont 77:869cf507173a 2 * Copyright (c) 2006-2013 ARM Limited
emilmont 77:869cf507173a 3 *
emilmont 77:869cf507173a 4 * Licensed under the Apache License, Version 2.0 (the "License");
emilmont 77:869cf507173a 5 * you may not use this file except in compliance with the License.
emilmont 77:869cf507173a 6 * You may obtain a copy of the License at
emilmont 77:869cf507173a 7 *
emilmont 77:869cf507173a 8 * http://www.apache.org/licenses/LICENSE-2.0
emilmont 77:869cf507173a 9 *
emilmont 77:869cf507173a 10 * Unless required by applicable law or agreed to in writing, software
emilmont 77:869cf507173a 11 * distributed under the License is distributed on an "AS IS" BASIS,
emilmont 77:869cf507173a 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
emilmont 77:869cf507173a 13 * See the License for the specific language governing permissions and
emilmont 77:869cf507173a 14 * limitations under the License.
emilmont 77:869cf507173a 15 */
emilmont 77:869cf507173a 16 #ifndef MBED_PINNAMES_H
emilmont 77:869cf507173a 17 #define MBED_PINNAMES_H
emilmont 77:869cf507173a 18
emilmont 77:869cf507173a 19 #include "cmsis.h"
emilmont 77:869cf507173a 20
emilmont 77:869cf507173a 21 #ifdef __cplusplus
emilmont 77:869cf507173a 22 extern "C" {
emilmont 77:869cf507173a 23 #endif
emilmont 77:869cf507173a 24
emilmont 77:869cf507173a 25 typedef enum {
emilmont 77:869cf507173a 26 PIN_INPUT,
emilmont 77:869cf507173a 27 PIN_OUTPUT
emilmont 77:869cf507173a 28 } PinDirection;
emilmont 77:869cf507173a 29
emilmont 77:869cf507173a 30 #define PORT_SHIFT 5
emilmont 77:869cf507173a 31
emilmont 77:869cf507173a 32 typedef enum {
emilmont 77:869cf507173a 33 // LPC Pin Names
emilmont 77:869cf507173a 34 P0_0 = LPC_GPIO0_BASE,
emilmont 77:869cf507173a 35 P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
emilmont 77:869cf507173a 36 P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
emilmont 77:869cf507173a 37 P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
emilmont 77:869cf507173a 38 P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
emilmont 77:869cf507173a 39 P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
emilmont 77:869cf507173a 40
emilmont 77:869cf507173a 41 // Arduino Pin Names
emilmont 77:869cf507173a 42
emilmont 77:869cf507173a 43 // PIN header connector
emilmont 77:869cf507173a 44 // for standard-based form factor with expansion board
emilmont 77:869cf507173a 45 // -----------------------------------------------------------
emilmont 77:869cf507173a 46 // PMW = Pulswidth Modulator
emilmont 77:869cf507173a 47 // EINT = External Interrupt
emilmont 77:869cf507173a 48 // AOUT = Analog Output
emilmont 77:869cf507173a 49
emilmont 77:869cf507173a 50 // Analog Ports (A0-A5)
emilmont 77:869cf507173a 51 A0 = P0_23, // I2S_CLK
emilmont 77:869cf507173a 52 A1 = P0_24, // I2S_WS
emilmont 77:869cf507173a 53 A2 = P0_25, // I2S_SDA
emilmont 77:869cf507173a 54 A3 = P0_26, // AOUT
emilmont 77:869cf507173a 55 A4 = P1_30, //
emilmont 77:869cf507173a 56 A5 = P1_31, //
emilmont 77:869cf507173a 57 // Digital Port (D0-D7)
emilmont 77:869cf507173a 58 D0 = P4_29, // TXD
emilmont 77:869cf507173a 59 D1 = P4_28, // RXD
emilmont 77:869cf507173a 60 D2 = P2_13, // EINT
emilmont 77:869cf507173a 61 D3 = P2_0, // PWM
emilmont 77:869cf507173a 62 D4 = P2_12, // EINT
emilmont 77:869cf507173a 63 D5 = P2_1, // PWM
emilmont 77:869cf507173a 64 D6 = P2_2, // PWM
emilmont 77:869cf507173a 65 D7 = P2_11, // EINT
emilmont 77:869cf507173a 66 // Digital Port (D8-D13)
emilmont 77:869cf507173a 67 D8 = P2_4, // PWM
emilmont 77:869cf507173a 68 D9 = P2_3, // PWM
emilmont 77:869cf507173a 69 D10 = P1_21, // PWM SSEL
emilmont 77:869cf507173a 70 D11 = P1_24, // PWM MOSI
emilmont 77:869cf507173a 71 D12 = P1_23, // PWM MISO
emilmont 77:869cf507173a 72 D13 = P1_20, // PWM SCK
emilmont 77:869cf507173a 73 // GND
emilmont 77:869cf507173a 74 // AREF
emilmont 77:869cf507173a 75 SDA = P0_0,
emilmont 77:869cf507173a 76 D14 = SDA,
emilmont 77:869cf507173a 77 SCL = P0_1,
emilmont 77:869cf507173a 78 D15 = SCL,
emilmont 77:869cf507173a 79
emilmont 77:869cf507173a 80 // I2C (shared with LISA/SARA)
emilmont 77:869cf507173a 81 GPSSDA = P0_27,
emilmont 77:869cf507173a 82 GPSSCL = P0_28,
emilmont 77:869cf507173a 83 // UART
emilmont 77:869cf507173a 84 GPSTXD = P0_10,
emilmont 77:869cf507173a 85 GPSRXD = P0_11,
emilmont 77:869cf507173a 86 // Control
emilmont 77:869cf507173a 87 GPSRST = P1_18, // Reset (input to GPS, active low)
emilmont 77:869cf507173a 88 GPSPPS = P1_19, // 1PPS Timepulse (output from GPS)
emilmont 77:869cf507173a 89 GPSINT = P1_22, // Interrupt (input to GPS)
emilmont 77:869cf507173a 90 GPSEN = P1_29, // Supply Control (high = enabled)
emilmont 77:869cf507173a 91
emilmont 77:869cf507173a 92 // u-blox LISA/SARA cellular modem
emilmont 77:869cf507173a 93 // http://www.u-blox.com/wireless-modules.html
emilmont 77:869cf507173a 94 // -----------------------------------------------------------
emilmont 77:869cf507173a 95 // UART (LPC1768 = DTE, LISA/SARA = DCE)
emilmont 77:869cf507173a 96 MDMTXD = P0_15, // Transmit Data
emilmont 77:869cf507173a 97 MDMRXD = P0_16, // Receive Data
emilmont 77:869cf507173a 98 MDMCTS = P0_17, // Clear to Send
emilmont 77:869cf507173a 99 MDMDCD = P0_18, // Data Carrier Detect
emilmont 77:869cf507173a 100 MDMDSR = P0_19, // Data Set Ready
emilmont 77:869cf507173a 101 MDMDTR = P0_20, // Data Terminal Ready (set high or use handshake)
emilmont 77:869cf507173a 102 MDMRI = P0_21, // Ring Indicator
emilmont 77:869cf507173a 103 MDMRTS = P0_22, // Request to Send (set high or use handshake)
emilmont 77:869cf507173a 104
emilmont 77:869cf507173a 105 // USB (not available on C27-G35)
emilmont 77:869cf507173a 106 MDMUSBDP = P0_29, // USB D+
emilmont 77:869cf507173a 107 MDMUSBDN = P0_30, // USB D-
emilmont 77:869cf507173a 108 MDMUSBCON = P2_9, // USB Connect
emilmont 77:869cf507173a 109 MDMUSBDET = P0_7, // USB Detect (n/a on REV.A board)
emilmont 77:869cf507173a 110 // Control
emilmont 77:869cf507173a 111 MDMEN = P2_5, // Supply Control (high = enabled)
emilmont 77:869cf507173a 112 MDMPWRON = P2_6, //
emilmont 77:869cf507173a 113 MDMGPIO1 = P2_7, // GPIO1, Network status
emilmont 77:869cf507173a 114 MDMRST = P2_8, // Reset (active low, set as open drain!)
emilmont 77:869cf507173a 115 MDMLVLOE = P0_9, // Serial/GPIO Level Shifter Output Enable (n/a on REV.A board)
emilmont 77:869cf507173a 116 MDMILVLOE = P0_8, // I2C Level Shifter Output Enable (n/a on REV.A board)
emilmont 77:869cf507173a 117
emilmont 77:869cf507173a 118 // CAN (TJA1040)
emilmont 77:869cf507173a 119 // -----------------------------------------------------------
emilmont 77:869cf507173a 120 CANRD = P0_4,
emilmont 77:869cf507173a 121 CANTD = P0_5,
emilmont 77:869cf507173a 122 CANS = P0_6, // standby (low=normal, high=standby/rxonly)
emilmont 77:869cf507173a 123
emilmont 77:869cf507173a 124 // Ethernet (DP83848)
emilmont 77:869cf507173a 125 // -----------------------------------------------------------
emilmont 77:869cf507173a 126 ETHTXD0 = P1_0,
emilmont 77:869cf507173a 127 ETHTXD1 = P1_1,
emilmont 77:869cf507173a 128 ETHTXEN = P1_4,
emilmont 77:869cf507173a 129 ETHCRS = P1_8,
emilmont 77:869cf507173a 130 ETHRXD0 = P1_9,
emilmont 77:869cf507173a 131 ETHRXD1 = P1_10,
emilmont 77:869cf507173a 132 ETHRXEN = P1_14,
emilmont 77:869cf507173a 133 ETHREFCLK = P1_15,
emilmont 77:869cf507173a 134 ETHMDC = P1_16,
emilmont 77:869cf507173a 135 ETHMDIO = P1_17,
emilmont 77:869cf507173a 136 ETHOSCEN = P1_27,
emilmont 77:869cf507173a 137 ETHRST = P1_28,
emilmont 77:869cf507173a 138 ETHLINK = P1_25, // LED_LINK
emilmont 77:869cf507173a 139 ETHSPEED = P1_26, // LED_SPEED
emilmont 77:869cf507173a 140
emilmont 77:869cf507173a 141 // ISP port
emilmont 77:869cf507173a 142 // -----------------------------------------------------------
emilmont 77:869cf507173a 143 ISP = P2_10,
emilmont 77:869cf507173a 144
emilmont 77:869cf507173a 145 // Other mbed Pin Names
emilmont 77:869cf507173a 146 LED = P3_25,
emilmont 77:869cf507173a 147 LED1 = LED,
emilmont 77:869cf507173a 148 LED_RED = LED,
emilmont 77:869cf507173a 149
emilmont 77:869cf507173a 150 // mbed / debug IF (LPC11)
emilmont 77:869cf507173a 151 // -----------------------------------------------------------
emilmont 77:869cf507173a 152 // Serial Port
emilmont 77:869cf507173a 153 USBTX = P0_2,
emilmont 77:869cf507173a 154 USBRX = P0_3,
emilmont 77:869cf507173a 155 USBTXD = USBTX, // identical USBTX
emilmont 77:869cf507173a 156 USBRXD = USBRX, // identical USBRX
emilmont 77:869cf507173a 157
emilmont 77:869cf507173a 158 // Not connected
emilmont 77:869cf507173a 159 NC = (int)0xFFFFFFFF
emilmont 77:869cf507173a 160 } PinName;
emilmont 77:869cf507173a 161
emilmont 77:869cf507173a 162 typedef enum {
emilmont 77:869cf507173a 163 PullUp = 0,
emilmont 77:869cf507173a 164 PullDown = 3,
emilmont 77:869cf507173a 165 PullNone = 2,
bogdanm 81:7d30d6019079 166 OpenDrain = 4,
bogdanm 81:7d30d6019079 167 PullDefault = PullDown
emilmont 77:869cf507173a 168 } PinMode;
emilmont 77:869cf507173a 169
emilmont 77:869cf507173a 170 // version of PINCON_TypeDef using register arrays
emilmont 77:869cf507173a 171 typedef struct {
emilmont 77:869cf507173a 172 __IO uint32_t PINSEL[11];
emilmont 77:869cf507173a 173 uint32_t RESERVED0[5];
emilmont 77:869cf507173a 174 __IO uint32_t PINMODE[10];
emilmont 77:869cf507173a 175 __IO uint32_t PINMODE_OD[5];
emilmont 77:869cf507173a 176 } PINCONARRAY_TypeDef;
emilmont 77:869cf507173a 177
emilmont 77:869cf507173a 178 #define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
emilmont 77:869cf507173a 179
emilmont 77:869cf507173a 180 //Additional C027 stuff
emilmont 77:869cf507173a 181 #define GPSADR (66<<1) // GPS I2C Address
emilmont 77:869cf507173a 182 #define GPSBAUD 9600 // Default GPS Baud Rate
emilmont 77:869cf507173a 183 #define MDMBAUD 115200 // Default Modem Baud Rate
emilmont 77:869cf507173a 184
emilmont 77:869cf507173a 185 #ifdef __cplusplus
emilmont 77:869cf507173a 186 }
emilmont 77:869cf507173a 187 #endif
emilmont 77:869cf507173a 188
emilmont 77:869cf507173a 189 #endif