mbed(SerialHalfDuplex入り)
Fork of mbed by
TARGET_NUCLEO_F303RE/stm32f3xx_hal_sdadc.h
- Committer:
- yusuke_kyo
- Date:
- 2015-04-08
- Revision:
- 98:01a414ca7d6d
- Parent:
- 93:e188a91d3eaa
File content as of revision 98:01a414ca7d6d:
/** ****************************************************************************** * @file stm32f3xx_hal_sdadc.h * @author MCD Application Team * @version V1.1.0 * @date 12-Sept-2014 * @brief This file contains all the functions prototypes for the SDADC * firmware library. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_SDADC_H #define __STM32F3xx_SDADC_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F373xC) || defined(STM32F378xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal_def.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup SDADC * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup SDADC_Exported_Types SDADC Exported Types * @{ */ /** * @brief HAL SDADC States definition */ typedef enum { HAL_SDADC_STATE_RESET = 0x00, /*!< SDADC not initialized */ HAL_SDADC_STATE_READY = 0x01, /*!< SDADC initialized and ready for use */ HAL_SDADC_STATE_CALIB = 0x02, /*!< SDADC calibration in progress */ HAL_SDADC_STATE_REG = 0x03, /*!< SDADC regular conversion in progress */ HAL_SDADC_STATE_INJ = 0x04, /*!< SDADC injected conversion in progress */ HAL_SDADC_STATE_REG_INJ = 0x05, /*!< SDADC regular and injected conversions in progress */ HAL_SDADC_STATE_ERROR = 0xFF, /*!< SDADC state error */ }HAL_SDADC_StateTypeDef; /** * @brief SDADC Init Structure definition */ typedef struct { uint32_t IdleLowPowerMode; /*!< Specifies if SDADC can enter in power down or standby when idle. This parameter can be a value of @ref SDADC_Idle_Low_Power_Mode */ uint32_t FastConversionMode; /*!< Specifies if Fast conversion mode is enabled or not. This parameter can be a value of @ref SDADC_Fast_Conv_Mode */ uint32_t SlowClockMode; /*!< Specifies if slow clock mode is enabled or not. This parameter can be a value of @ref SDADC_Slow_Clock_Mode */ uint32_t ReferenceVoltage; /*!< Specifies the reference voltage. This parameter can be a value of @ref SDADC_Reference_Voltage */ }SDADC_InitTypeDef; /** * @brief SDADC handle Structure definition */ typedef struct { SDADC_TypeDef *Instance; /*!< SDADC registers base address */ SDADC_InitTypeDef Init; /*!< SDADC init parameters */ DMA_HandleTypeDef *hdma; /*!< SDADC DMA Handle parameters */ uint32_t RegularContMode; /*!< Regular conversion continuous mode */ uint32_t InjectedContMode; /*!< Injected conversion continuous mode */ uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */ uint32_t InjConvRemaining; /*!< Injected conversion remaining */ uint32_t RegularTrigger; /*!< Current trigger used for regular conversion */ uint32_t InjectedTrigger; /*!< Current trigger used for injected conversion */ uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */ uint32_t RegularMultimode; /*!< current type of regular multimode */ uint32_t InjectedMultimode; /*!< Current type of injected multimode */ HAL_SDADC_StateTypeDef State; /*!< SDADC state */ uint32_t ErrorCode; /*!< SDADC Error code */ }SDADC_HandleTypeDef; /** * @brief SDADC Configuration Register Parameter Structure */ typedef struct { uint32_t InputMode; /*!< Specifies the input mode (single ended, differential...) This parameter can be any value of @ref SDADC_InputMode */ uint32_t Gain; /*!< Specifies the gain setting. This parameter can be any value of @ref SDADC_Gain */ uint32_t CommonMode; /*!< Specifies the common mode setting (VSSA, VDDA, VDDA/2). This parameter can be any value of @ref SDADC_CommonMode */ uint32_t Offset; /*!< Specifies the 12-bit offset value. This parameter can be any value lower or equal to 0x00000FFF */ }SDADC_ConfParamTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup SDADC_Exported_Constants SDADC Exported Constants * @{ */ /** @defgroup SDADC_Idle_Low_Power_Mode SDADC Idle Low Power Mode * @{ */ #define SDADC_LOWPOWER_NONE ((uint32_t)0x00000000) #define SDADC_LOWPOWER_POWERDOWN SDADC_CR1_PDI #define SDADC_LOWPOWER_STANDBY SDADC_CR1_SBI #define IS_SDADC_LOWPOWER_MODE(LOWPOWER) (((LOWPOWER) == SDADC_LOWPOWER_NONE) || \ ((LOWPOWER) == SDADC_LOWPOWER_POWERDOWN) || \ ((LOWPOWER) == SDADC_LOWPOWER_STANDBY)) /** * @} */ /** @defgroup SDADC_Fast_Conv_Mode SDADC Fast Conversion Mode * @{ */ #define SDADC_FAST_CONV_DISABLE ((uint32_t)0x00000000) #define SDADC_FAST_CONV_ENABLE SDADC_CR2_FAST #define IS_SDADC_FAST_CONV_MODE(FAST) (((FAST) == SDADC_FAST_CONV_DISABLE) || \ ((FAST) == SDADC_FAST_CONV_ENABLE)) /** * @} */ /** @defgroup SDADC_Slow_Clock_Mode SDADC Slow Clock Mode * @{ */ #define SDADC_SLOW_CLOCK_DISABLE ((uint32_t)0x00000000) #define SDADC_SLOW_CLOCK_ENABLE SDADC_CR1_SLOWCK #define IS_SDADC_SLOW_CLOCK_MODE(MODE) (((MODE) == SDADC_SLOW_CLOCK_DISABLE) || \ ((MODE) == SDADC_SLOW_CLOCK_ENABLE)) /** * @} */ /** @defgroup SDADC_Reference_Voltage SDADC Reference Voltage * @{ */ #define SDADC_VREF_EXT ((uint32_t)0x00000000) /*!< The reference voltage is forced externally using VREF pin */ #define SDADC_VREF_VREFINT1 SDADC_CR1_REFV_0 /*!< The reference voltage is forced internally to 1.22V VREFINT */ #define SDADC_VREF_VREFINT2 SDADC_CR1_REFV_1 /*!< The reference voltage is forced internally to 1.8V VREFINT */ #define SDADC_VREF_VDDA SDADC_CR1_REFV /*!< The reference voltage is forced internally to VDDA */ #define IS_SDADC_VREF(VREF) (((VREF) == SDADC_VREF_EXT) || \ ((VREF) == SDADC_VREF_VREFINT1) || \ ((VREF) == SDADC_VREF_VREFINT2) || \ ((VREF) == SDADC_VREF_VDDA)) /** * @} */ /** @defgroup SDADC_ConfIndex SDADC Configuration Index * @{ */ #define SDADC_CONF_INDEX_0 ((uint32_t)0x00000000) /*!< Configuration 0 Register selected */ #define SDADC_CONF_INDEX_1 ((uint32_t)0x00000001) /*!< Configuration 1 Register selected */ #define SDADC_CONF_INDEX_2 ((uint32_t)0x00000002) /*!< Configuration 2 Register selected */ #define IS_SDADC_CONF_INDEX(CONF) (((CONF) == SDADC_CONF_INDEX_0) || \ ((CONF) == SDADC_CONF_INDEX_1) || \ ((CONF) == SDADC_CONF_INDEX_2)) /** * @} */ /** @defgroup SDADC_InputMode SDADC Input Mode * @{ */ #define SDADC_INPUT_MODE_DIFF ((uint32_t)0x00000000) /*!< Conversions are executed in differential mode */ #define SDADC_INPUT_MODE_SE_OFFSET SDADC_CONF0R_SE0_0 /*!< Conversions are executed in single ended offset mode */ #define SDADC_INPUT_MODE_SE_ZERO_REFERENCE SDADC_CONF0R_SE0 /*!< Conversions are executed in single ended zero-volt reference mode */ #define IS_SDADC_INPUT_MODE(MODE) (((MODE) == SDADC_INPUT_MODE_DIFF) || \ ((MODE) == SDADC_INPUT_MODE_SE_OFFSET) || \ ((MODE) == SDADC_INPUT_MODE_SE_ZERO_REFERENCE)) /** * @} */ /** @defgroup SDADC_Gain SDADC Gain * @{ */ #define SDADC_GAIN_1 ((uint32_t)0x00000000) /*!< Gain equal to 1 */ #define SDADC_GAIN_2 SDADC_CONF0R_GAIN0_0 /*!< Gain equal to 2 */ #define SDADC_GAIN_4 SDADC_CONF0R_GAIN0_1 /*!< Gain equal to 4 */ #define SDADC_GAIN_8 ((uint32_t)0x00300000) /*!< Gain equal to 8 */ #define SDADC_GAIN_16 SDADC_CONF0R_GAIN0_2 /*!< Gain equal to 16 */ #define SDADC_GAIN_32 ((uint32_t)0x00500000) /*!< Gain equal to 32 */ #define SDADC_GAIN_1_2 SDADC_CONF0R_GAIN0 /*!< Gain equal to 1/2 */ #define IS_SDADC_GAIN(GAIN) (((GAIN) == SDADC_GAIN_1) || \ ((GAIN) == SDADC_GAIN_2) || \ ((GAIN) == SDADC_GAIN_4) || \ ((GAIN) == SDADC_GAIN_8) || \ ((GAIN) == SDADC_GAIN_16) || \ ((GAIN) == SDADC_GAIN_32) || \ ((GAIN) == SDADC_GAIN_1_2)) /** * @} */ /** @defgroup SDADC_CommonMode SDADC Common Mode * @{ */ #define SDADC_COMMON_MODE_VSSA ((uint32_t)0x00000000) /*!< Select SDADC VSSA as common mode */ #define SDADC_COMMON_MODE_VDDA_2 SDADC_CONF0R_COMMON0_0 /*!< Select SDADC VDDA/2 as common mode */ #define SDADC_COMMON_MODE_VDDA SDADC_CONF0R_COMMON0_1 /*!< Select SDADC VDDA as common mode */ #define IS_SDADC_COMMON_MODE(MODE) (((MODE) == SDADC_COMMON_MODE_VSSA) || \ ((MODE) == SDADC_COMMON_MODE_VDDA_2) || \ ((MODE) == SDADC_COMMON_MODE_VDDA)) /** * @} */ /** @defgroup SDADC_Offset SDADC Offset * @{ */ #define IS_SDADC_OFFSET_VALUE(VALUE) ((VALUE) <= 0x00000FFF) /** * @} */ /** @defgroup SDADC_Channel_Selection SDADC Channel Selection * @{ */ /* SDADC Channels ------------------------------------------------------------*/ /* The SDADC channels are defined as follows: - in 16-bit LSB the channel mask is set - in 16-bit MSB the channel number is set e.g. for channel 5 definition: - the channel mask is 0x00000020 (bit 5 is set) - the channel number 5 is 0x00050000 --> Consequently, channel 5 definition is 0x00000020 | 0x00050000 = 0x00050020 */ #define SDADC_CHANNEL_0 ((uint32_t)0x00000001) #define SDADC_CHANNEL_1 ((uint32_t)0x00010002) #define SDADC_CHANNEL_2 ((uint32_t)0x00020004) #define SDADC_CHANNEL_3 ((uint32_t)0x00030008) #define SDADC_CHANNEL_4 ((uint32_t)0x00040010) #define SDADC_CHANNEL_5 ((uint32_t)0x00050020) #define SDADC_CHANNEL_6 ((uint32_t)0x00060040) #define SDADC_CHANNEL_7 ((uint32_t)0x00070080) #define SDADC_CHANNEL_8 ((uint32_t)0x00080100) /* Just one channel of the 9 channels can be selected for regular conversion */ #define IS_SDADC_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == SDADC_CHANNEL_0) || \ ((CHANNEL) == SDADC_CHANNEL_1) || \ ((CHANNEL) == SDADC_CHANNEL_2) || \ ((CHANNEL) == SDADC_CHANNEL_3) || \ ((CHANNEL) == SDADC_CHANNEL_4) || \ ((CHANNEL) == SDADC_CHANNEL_5) || \ ((CHANNEL) == SDADC_CHANNEL_6) || \ ((CHANNEL) == SDADC_CHANNEL_7) || \ ((CHANNEL) == SDADC_CHANNEL_8)) /* Any or all of the 9 channels can be selected for injected conversion */ #define IS_SDADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0) && ((CHANNEL) <= 0x000F01FF)) /** * @} */ /** @defgroup SDADC_CalibrationSequence SDADC Calibration Sequence * @{ */ #define SDADC_CALIBRATION_SEQ_1 ((uint32_t)0x00000000) /*!< One calibration sequence to calculate offset of conf0 (OFFSET0[11:0]) */ #define SDADC_CALIBRATION_SEQ_2 SDADC_CR2_CALIBCNT_0 /*!< Two calibration sequences to calculate offset of conf0 and conf1 (OFFSET0[11:0] and OFFSET1[11:0]) */ #define SDADC_CALIBRATION_SEQ_3 SDADC_CR2_CALIBCNT_1 /*!< Three calibration sequences to calculate offset of conf0, conf1 and conf2 (OFFSET0[11:0], OFFSET1[11:0], and OFFSET2[11:0]) */ #define IS_SDADC_CALIB_SEQUENCE(SEQUENCE) (((SEQUENCE) == SDADC_CALIBRATION_SEQ_1) || \ ((SEQUENCE) == SDADC_CALIBRATION_SEQ_2) || \ ((SEQUENCE) == SDADC_CALIBRATION_SEQ_3)) /** * @} */ /** @defgroup SDADC_ContinuousMode SDADC Continuous Mode * @{ */ #define SDADC_CONTINUOUS_CONV_OFF ((uint32_t)0x00000000) /*!< Conversion are not continuous */ #define SDADC_CONTINUOUS_CONV_ON ((uint32_t)0x00000001) /*!< Conversion are continuous */ #define IS_SDADC_CONTINUOUS_MODE(MODE) (((MODE) == SDADC_CONTINUOUS_CONV_OFF) || \ ((MODE) == SDADC_CONTINUOUS_CONV_ON)) /** * @} */ /** @defgroup SDADC_Trigger SDADC Trigger * @{ */ #define SDADC_SOFTWARE_TRIGGER ((uint32_t)0x00000000) /*!< Software trigger */ #define SDADC_SYNCHRONOUS_TRIGGER ((uint32_t)0x00000001) /*!< Synchronous with SDADC1 (only for SDADC2 and SDADC3) */ #define SDADC_EXTERNAL_TRIGGER ((uint32_t)0x00000002) /*!< External trigger */ #define IS_SDADC_REGULAR_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \ ((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER)) #define IS_SDADC_INJECTED_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \ ((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER) || \ ((TRIGGER) == SDADC_EXTERNAL_TRIGGER)) /** * @} */ /** @defgroup SDADC_InjectedExtTrigger SDADC Injected External Trigger * @{ */ #define SDADC_EXT_TRIG_TIM13_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC1 */ #define SDADC_EXT_TRIG_TIM14_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC1 */ #define SDADC_EXT_TRIG_TIM16_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC3 */ #define SDADC_EXT_TRIG_TIM17_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC2 */ #define SDADC_EXT_TRIG_TIM12_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC2 */ #define SDADC_EXT_TRIG_TIM12_CC2 ((uint32_t)0x00000100) /*!< Trigger source for SDADC3 */ #define SDADC_EXT_TRIG_TIM15_CC2 ((uint32_t)0x00000200) /*!< Trigger source for SDADC1 */ #define SDADC_EXT_TRIG_TIM2_CC3 ((uint32_t)0x00000200) /*!< Trigger source for SDADC2 */ #define SDADC_EXT_TRIG_TIM2_CC4 ((uint32_t)0x00000200) /*!< Trigger source for SDADC3 */ #define SDADC_EXT_TRIG_TIM3_CC1 ((uint32_t)0x00000300) /*!< Trigger source for SDADC1 */ #define SDADC_EXT_TRIG_TIM3_CC2 ((uint32_t)0x00000300) /*!< Trigger source for SDADC2 */ #define SDADC_EXT_TRIG_TIM3_CC3 ((uint32_t)0x00000300) /*!< Trigger source for SDADC3 */ #define SDADC_EXT_TRIG_TIM4_CC1 ((uint32_t)0x00000400) /*!< Trigger source for SDADC1 */ #define SDADC_EXT_TRIG_TIM4_CC2 ((uint32_t)0x00000400) /*!< Trigger source for SDADC2 */ #define SDADC_EXT_TRIG_TIM4_CC3 ((uint32_t)0x00000400) /*!< Trigger source for SDADC3 */ #define SDADC_EXT_TRIG_TIM19_CC2 ((uint32_t)0x00000500) /*!< Trigger source for SDADC1 */ #define SDADC_EXT_TRIG_TIM19_CC3 ((uint32_t)0x00000500) /*!< Trigger source for SDADC2 */ #define SDADC_EXT_TRIG_TIM19_CC4 ((uint32_t)0x00000500) /*!< Trigger source for SDADC3 */ #define SDADC_EXT_TRIG_EXTI11 ((uint32_t)0x00000700) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */ #define SDADC_EXT_TRIG_EXTI15 ((uint32_t)0x00000600) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */ #define IS_SDADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == SDADC_EXT_TRIG_TIM13_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM14_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM16_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM17_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC2) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM15_CC2) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC3) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC4) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC2) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC3) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC1) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC2) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC3) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC2) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC3) || \ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC4) || \ ((INJTRIG) == SDADC_EXT_TRIG_EXTI11) || \ ((INJTRIG) == SDADC_EXT_TRIG_EXTI15)) /** * @} */ /** @defgroup SDADC_ExtTriggerEdge SDADC External Trigger Edge * @{ */ #define SDADC_EXT_TRIG_RISING_EDGE SDADC_CR2_JEXTEN_0 /*!< External rising edge */ #define SDADC_EXT_TRIG_FALLING_EDGE SDADC_CR2_JEXTEN_1 /*!< External falling edge */ #define SDADC_EXT_TRIG_BOTH_EDGES SDADC_CR2_JEXTEN /*!< External rising and falling edges */ #define IS_SDADC_EXT_TRIG_EDGE(TRIGGER) (((TRIGGER) == SDADC_EXT_TRIG_RISING_EDGE) || \ ((TRIGGER) == SDADC_EXT_TRIG_FALLING_EDGE) || \ ((TRIGGER) == SDADC_EXT_TRIG_BOTH_EDGES)) /** * @} */ /** @defgroup SDADC_InjectedDelay SDADC Injected Conversion Delay * @{ */ #define SDADC_INJECTED_DELAY_NONE ((uint32_t)0x00000000) /*!< No delay on injected conversion */ #define SDADC_INJECTED_DELAY SDADC_CR2_JDS /*!< Delay on injected conversion */ #define IS_SDADC_INJECTED_DELAY(DELAY) (((DELAY) == SDADC_INJECTED_DELAY_NONE) || \ ((DELAY) == SDADC_INJECTED_DELAY)) /** * @} */ /** @defgroup SDADC_MultimodeType SDADC Multimode Type * @{ */ #define SDADC_MULTIMODE_SDADC1_SDADC2 ((uint32_t)0x00000000) /*!< Get conversion values for SDADC1 and SDADC2 */ #define SDADC_MULTIMODE_SDADC1_SDADC3 ((uint32_t)0x00000001) /*!< Get conversion values for SDADC1 and SDADC3 */ #define IS_SDADC_MULTIMODE_TYPE(TYPE) (((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC2) || \ ((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC3)) /** * @} */ /** @defgroup SDADC_ErrorCode SDADC Error Code * @{ */ #define SDADC_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ #define SDADC_ERROR_REGULAR_OVERRUN ((uint32_t)0x00000001) /*!< Overrun occurs during regular conversion */ #define SDADC_ERROR_INJECTED_OVERRUN ((uint32_t)0x00000002) /*!< Overrun occurs during injected conversion */ #define SDADC_ERROR_DMA ((uint32_t)0x00000003) /*!< DMA error occurs */ /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup SDADC_Exported_Macros SDADC Exported Macros * @{ */ /** @brief Reset SDADC handle state * @param __HANDLE__: SDADC handle. * @retval None */ #define __HAL_SDADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDADC_STATE_RESET) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup SDADC_Exported_Functions SDADC Exported Functions * @{ */ /** @addtogroup SDADC_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ /* Initialization and de-initialization functions *****************************/ HAL_StatusTypeDef HAL_SDADC_Init(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_DeInit(SDADC_HandleTypeDef *hsdadc); void HAL_SDADC_MspInit(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_MspDeInit(SDADC_HandleTypeDef* hsdadc); /** * @} */ /** @addtogroup SDADC_Exported_Functions_Group2 peripheral control functions * @{ */ /* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_SDADC_PrepareChannelConfig(SDADC_HandleTypeDef *hsdadc, uint32_t ConfIndex, SDADC_ConfParamTypeDef* ConfParamStruct); HAL_StatusTypeDef HAL_SDADC_AssociateChannelConfig(SDADC_HandleTypeDef *hsdadc, uint32_t Channel, uint32_t ConfIndex); HAL_StatusTypeDef HAL_SDADC_ConfigChannel(SDADC_HandleTypeDef *hsdadc, uint32_t Channel, uint32_t ContinuousMode); HAL_StatusTypeDef HAL_SDADC_InjectedConfigChannel(SDADC_HandleTypeDef *hsdadc, uint32_t Channel, uint32_t ContinuousMode); HAL_StatusTypeDef HAL_SDADC_SelectInjectedExtTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t InjectedExtTrigger, uint32_t ExtTriggerEdge); HAL_StatusTypeDef HAL_SDADC_SelectInjectedDelay(SDADC_HandleTypeDef *hsdadc, uint32_t InjectedDelay); HAL_StatusTypeDef HAL_SDADC_SelectRegularTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger); HAL_StatusTypeDef HAL_SDADC_SelectInjectedTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger); HAL_StatusTypeDef HAL_SDADC_MultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType); HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType); /** * @} */ /** @addtogroup SDADC_Exported_Functions_Group3 Input and Output operation functions * @{ */ /* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_SDADC_CalibrationStart(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence); HAL_StatusTypeDef HAL_SDADC_CalibrationStart_IT(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence); HAL_StatusTypeDef HAL_SDADC_Start(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_Start_IT(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_Start_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length); HAL_StatusTypeDef HAL_SDADC_Stop(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_Stop_IT(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_Stop_DMA(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_InjectedStart(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_InjectedStart_IT(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_InjectedStart_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length); HAL_StatusTypeDef HAL_SDADC_InjectedStop(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_InjectedStop_IT(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_InjectedStop_DMA(SDADC_HandleTypeDef *hsdadc); HAL_StatusTypeDef HAL_SDADC_MultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length); HAL_StatusTypeDef HAL_SDADC_MultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc); HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length); HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc); uint32_t HAL_SDADC_GetValue(SDADC_HandleTypeDef *hsdadc); uint32_t HAL_SDADC_InjectedGetValue(SDADC_HandleTypeDef *hsdadc, uint32_t* Channel); uint32_t HAL_SDADC_MultiModeGetValue(SDADC_HandleTypeDef* hsdadc); uint32_t HAL_SDADC_InjectedMultiModeGetValue(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_IRQHandler(SDADC_HandleTypeDef* hsdadc); HAL_StatusTypeDef HAL_SDADC_PollForCalibEvent(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout); HAL_StatusTypeDef HAL_SDADC_PollForConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout); HAL_StatusTypeDef HAL_SDADC_PollForInjectedConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout); void HAL_SDADC_CalibrationCpltCallback(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_ConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_ConvCpltCallback(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_InjectedConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_InjectedConvCpltCallback(SDADC_HandleTypeDef* hsdadc); void HAL_SDADC_ErrorCallback(SDADC_HandleTypeDef* hsdadc); /** * @} */ /** @defgroup SDADC_Exported_Functions_Group4 Peripheral State functions * @{ */ /* Peripheral State and Error functions ***************************************/ HAL_SDADC_StateTypeDef HAL_SDADC_GetState(SDADC_HandleTypeDef* hsdadc); uint32_t HAL_SDADC_GetError(SDADC_HandleTypeDef* hsdadc); /* Private functions ---------------------------------------------------------*/ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #endif /* defined(STM32F373xC) || defined(STM32F378xx) */ #ifdef __cplusplus } #endif #endif /*__STM32F3xx_SDADC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/