File content as of revision 98:01a414ca7d6d:

/**
  ******************************************************************************
  * @file    stm32f1xx_hal.h
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    15-December-2014
  * @brief   This file contains all the functions prototypes for the HAL 
  *          module driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_HAL_H
#define __STM32F1xx_HAL_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal_conf.h"

/** @addtogroup STM32F1xx_HAL_Driver
  * @{
  */

/** @addtogroup HAL
  * @{
  */ 

/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/

/* Exported macro ------------------------------------------------------------*/

/** @defgroup HAL_Exported_Macros HAL Exported Macros
  * @{
  */

/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
  * @brief   Freeze/Unfreeze Peripherals in Debug mode 
  * Note: On devices STM32F10xx8 and STM32F10xxB,
  *                  STM32F101xC/D/E and STM32F103xC/D/E,
  *                  STM32F101xF/G and STM32F103xF/G
  *                  STM32F10xx4 and STM32F10xx6
  *       Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in 
  *       debug mode (not accessible by the user software in normal mode).
  *       Refer to errata sheet of these devices for more details.
  * @{
  */
   
/* Peripherals on APB1 */
/**
  * @brief  TIM2 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)

/**
  * @brief  TIM3 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM3()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM3()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)

#if defined (DBGMCU_CR_DBG_TIM4_STOP)
/**
  * @brief  TIM4 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM4()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM4()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM5_STOP)
/**
  * @brief  TIM5 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM5()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM5()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM6_STOP)
/**
  * @brief  TIM6 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM6()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM6()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM7_STOP)
/**
  * @brief  TIM7 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM7()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM7()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM12_STOP)
/**
  * @brief  TIM12 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM12()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM12()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM13_STOP)
/**
  * @brief  TIM13 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM13()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM13()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM14_STOP)
/**
  * @brief  TIM14 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM14()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM14()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
#endif

/**
  * @brief  WWDG Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_WWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_WWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)

/**
  * @brief  IWDG Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_IWDG()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_IWDG()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)

/**
  * @brief  I2C1 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)

#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
/**
  * @brief  I2C2 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()    SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
#endif

#if defined (DBGMCU_CR_DBG_CAN1_STOP)
/**
  * @brief  CAN1 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_CAN1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
#define __HAL_DBGMCU_UNFREEZE_CAN1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
#endif

#if defined (DBGMCU_CR_DBG_CAN2_STOP)
/**
  * @brief  CAN2 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_CAN2()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
#define __HAL_DBGMCU_UNFREEZE_CAN2()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
#endif   
   
/* Peripherals on APB2 */
#if defined (DBGMCU_CR_DBG_TIM1_STOP)
/**
  * @brief  TIM1 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM1()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM1()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM8_STOP)
/**
  * @brief  TIM8 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM8()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM8()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM9_STOP)
/**
  * @brief  TIM9 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM9()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM9()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM10_STOP)
/**
  * @brief  TIM10 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM10()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM10()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM11_STOP)
/**
  * @brief  TIM11 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM11()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM11()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
#endif


#if defined (DBGMCU_CR_DBG_TIM15_STOP)
/**
  * @brief  TIM15 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM15()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM15()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM16_STOP)
/**
  * @brief  TIM16 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM16()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM16()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
#endif

#if defined (DBGMCU_CR_DBG_TIM17_STOP)
/**
  * @brief  TIM17 Peripherals Debug mode 
  */
#define __HAL_DBGMCU_FREEZE_TIM17()            SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM17()          CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
#endif

/**
  * @}
  */

/**
  * @}
  */

/* Exported functions --------------------------------------------------------*/

/** @addtogroup HAL_Exported_Functions
  * @{
  */

/** @addtogroup HAL_Exported_Functions_Group1
  * @{
  */

/* Initialization and de-initialization functions  ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void              HAL_MspInit(void);
void              HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);

/**
  * @}
  */

/** @addtogroup HAL_Exported_Functions_Group2
  * @{
  */

/* Peripheral Control functions  ************************************************/
void              HAL_IncTick(void);
void              HAL_Delay(__IO uint32_t Delay);
uint32_t          HAL_GetTick(void);
void              HAL_SuspendTick(void);
void              HAL_ResumeTick(void);
uint32_t          HAL_GetHalVersion(void);
uint32_t          HAL_GetREVID(void);
uint32_t          HAL_GetDEVID(void);
void              HAL_DBGMCU_EnableDBGSleepMode(void);
void              HAL_DBGMCU_DisableDBGSleepMode(void);
void              HAL_DBGMCU_EnableDBGStopMode(void);
void              HAL_DBGMCU_DisableDBGStopMode(void);
void              HAL_DBGMCU_EnableDBGStandbyMode(void);
void              HAL_DBGMCU_DisableDBGStandbyMode(void);

/**
  * @}
  */

/**
  * @}
  */


/**
  * @}
  */ 

/**
  * @}
  */ 
  
#ifdef __cplusplus
}
#endif

#endif /* __STM32F1xx_HAL_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/