Diff: LPC11U24/power_api.h

Revision:

54:71b101360fb9

Parent:

46:890817bdcffb

--- a/LPC11U24/power_api.h	Thu Dec 06 17:03:27 2012 +0000
+++ b/LPC11U24/power_api.h	Tue Jan 08 12:46:36 2013 +0000
@@ -26,12 +26,12 @@
 
 #define PWRROMD_PRESENT
 
-typedef struct _PWRD {
+typedef	struct _PWRD {
   void (*set_pll)(unsigned int cmd[], unsigned int resp[]);
   void (*set_power)(unsigned int cmd[], unsigned int resp[]);
 }  PWRD;
 
-typedef struct _ROM {
+typedef	struct _ROM {
 #ifdef USBROMD_PRESENT
    const USB * pUSBD;
 #else
@@ -51,26 +51,26 @@
 }  ROM;
 
 //PLL setup related definitions
-#define CPU_FREQ_EQU  		0       //main PLL freq must be equal to the specified 
-#define CPU_FREQ_LTE		1       //main PLL freq must be less than or equal the specified
-#define CPU_FREQ_GTE		2       //main PLL freq must be greater than or equal the specified
-#define CPU_FREQ_APPROX		3       //main PLL freq must be as close as possible the specified
+#define	CPU_FREQ_EQU  		0       //main PLL freq must be equal to the specified 
+#define	CPU_FREQ_LTE		1       //main PLL freq must be less than or equal the specified
+#define	CPU_FREQ_GTE		2       //main PLL freq must be greater than or equal the specified
+#define	CPU_FREQ_APPROX		3       //main PLL freq must be as close as possible the specified
 
-#define PLL_CMD_SUCCESS		0       //PLL setup successfully found
-#define PLL_INVALID_FREQ	1       //specified freq out of range (either input or output)
-#define PLL_INVALID_MODE	2       //invalid mode (see above for valid) specified
-#define PLL_FREQ_NOT_FOUND	3       //specified freq not found under specified conditions
-#define PLL_NOT_LOCKED		4       //PLL not locked => no changes to the PLL setup
+#define	PLL_CMD_SUCCESS		0       //PLL setup successfully found
+#define	PLL_INVALID_FREQ	1       //specified freq out of range (either input or output)
+#define	PLL_INVALID_MODE	2       //invalid mode (see above for valid) specified
+#define	PLL_FREQ_NOT_FOUND	3       //specified freq not found under specified conditions
+#define	PLL_NOT_LOCKED		4       //PLL not locked => no changes to the PLL setup
 
 //power setup elated definitions
-#define PARAM_DEFAULT			0   //default power settings (voltage regulator, flash interface)
-#define PARAM_CPU_PERFORMANCE	1   //setup for maximum CPU performance (higher current, more computation)
-#define PARAM_EFFICIENCY		2   //balanced setting (power vs CPU performance)
-#define PARAM_LOW_CURRENT		3   //lowest active current, lowest CPU performance
+#define	PARAM_DEFAULT			0   //default power settings (voltage regulator, flash interface)
+#define	PARAM_CPU_PERFORMANCE	1   //setup for maximum CPU performance (higher current, more computation)
+#define	PARAM_EFFICIENCY		2   //balanced setting (power vs CPU performance)
+#define	PARAM_LOW_CURRENT		3   //lowest active current, lowest CPU performance
 
-#define PARAM_CMD_SUCCESS		0   //power setting successfully found
-#define PARAM_INVALID_FREQ		1   //specified freq out of range (=0 or > 50 MHz)
-#define PARAM_INVALID_MODE		2   //specified mode not valid (see above for valid)
+#define	PARAM_CMD_SUCCESS		0   //power setting successfully found
+#define	PARAM_INVALID_FREQ		1   //specified freq out of range (=0 or > 50 MHz)
+#define	PARAM_INVALID_MODE		2   //specified mode not valid (see above for valid)
 
 #define MAX_CLOCK_KHZ_PARAM                50000