Diff: TARGET_ARCH_MAX/stm32f4xx_hal_flash.h

Revision:

89:552587b429a1

Child:

92:4fc01daae5a5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/stm32f4xx_hal_flash.h	Fri Sep 12 16:41:52 2014 +0100
@@ -0,0 +1,362 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.h
+  * @author  MCD Application Team
+  * @version V1.1.0RC2
+  * @date    14-May-2014
+  * @brief   Header file of FLASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/**
+  * @brief  FLASH Error structure definition
+  */
+typedef enum
+{ 
+  FLASH_ERROR_RD =  0x01,
+  FLASH_ERROR_PGS = 0x02,
+  FLASH_ERROR_PGP = 0x04,
+  FLASH_ERROR_PGA = 0x08,
+  FLASH_ERROR_WRP = 0x10,
+  FLASH_ERROR_OPERATION = 0x20
+}FLASH_ErrorTypeDef;
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE = 0, 
+  FLASH_PROC_SECTERASE,
+  FLASH_PROC_MASSERASE,
+  FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing;   /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+  
+  __IO uint32_t               NbSectorsToErase;   /*Internal variable to save the remaining sectors to erase in IT context*/
+  
+  __IO uint8_t                VoltageForErase;    /*Internal variable to provide voltange range selected by user in IT context*/
+  
+  __IO uint32_t               Sector;             /*Internal variable to define the current sector which is erasing*/
+  
+  __IO uint32_t               Bank;               /*Internal variable to save current bank selected during mass erase*/
+  
+  __IO uint32_t               Address;            /*Internal variable to save address selected for program*/
+  
+  HAL_LockTypeDef             Lock;               /* FLASH locking object                */
+
+  __IO FLASH_ErrorTypeDef     ErrorCode;          /* FLASH error code                    */
+
+}FLASH_ProcessTypeDef;
+
+/** 
+  * @brief FLASH Error source  
+  */ 
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define TYPEPROGRAM_BYTE        ((uint32_t)0x00)  /*!< Program byte (8-bit) at a specified address           */
+#define TYPEPROGRAM_HALFWORD    ((uint32_t)0x01)  /*!< Program a half-word (16-bit) at a specified address   */
+#define TYPEPROGRAM_WORD        ((uint32_t)0x02)  /*!< Program a word (32-bit) at a specified address        */
+#define TYPEPROGRAM_DOUBLEWORD  ((uint32_t)0x03)  /*!< Program a double word (64-bit) at a specified address */
+
+#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \
+                              ((VALUE) == TYPEPROGRAM_HALFWORD) || \
+                              ((VALUE) == TYPEPROGRAM_WORD) || \
+                              ((VALUE) == TYPEPROGRAM_DOUBLEWORD))  
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+  * @brief Flag definition
+  * @{
+  */ 
+#define FLASH_FLAG_EOP                 FLASH_SR_EOP            /*!< FLASH End of Operation flag               */
+#define FLASH_FLAG_OPERR               FLASH_SR_SOP            /*!< FLASH operation Error flag                */
+#define FLASH_FLAG_WRPERR              FLASH_SR_WRPERR         /*!< FLASH Write protected error flag          */
+#define FLASH_FLAG_PGAERR              FLASH_SR_PGAERR         /*!< FLASH Programming Alignment error flag    */
+#define FLASH_FLAG_PGPERR              FLASH_SR_PGPERR         /*!< FLASH Programming Parallelism error flag  */
+#define FLASH_FLAG_PGSERR              FLASH_SR_PGSERR         /*!< FLASH Programming Sequence error flag     */
+#define FLASH_FLAG_RDERR               ((uint32_t)0x00000100)  /*!< Read Protection error flag (PCROP)        */
+#define FLASH_FLAG_BSY                 FLASH_SR_BSY            /*!< FLASH Busy flag                           */ 
+
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */ 
+#define FLASH_IT_EOP                   FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR                   ((uint32_t)0x02000000)  /*!< Error Interrupt source                  */
+
+/**
+  * @}
+  */  
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+  * @{
+  */
+#define FLASH_PSIZE_BYTE           ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD      ((uint32_t)0x00000100)
+#define FLASH_PSIZE_WORD           ((uint32_t)0x00000200)
+#define FLASH_PSIZE_DOUBLE_WORD    ((uint32_t)0x00000300)
+#define CR_PSIZE_MASK              ((uint32_t)0xFFFFFCFF)
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Keys FLASH Keys
+  * @{
+  */ 
+#define RDP_KEY                  ((uint16_t)0x00A5)
+#define FLASH_KEY1               ((uint32_t)0x45670123)
+#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1           ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2           ((uint32_t)0x4C5D6E7F)
+/**
+  * @}
+  */ 
+
+/** 
+  * @brief   ACR register byte 0 (Bits[7:0]) base address  
+  */ 
+#define ACR_BYTE0_ADDRESS           ((uint32_t)0x40023C00) 
+/** 
+  * @brief   OPTCR register byte 0 (Bits[7:0]) base address  
+  */ 
+#define OPTCR_BYTE0_ADDRESS         ((uint32_t)0x40023C14)
+/** 
+  * @brief   OPTCR register byte 1 (Bits[15:8]) base address  
+  */ 
+#define OPTCR_BYTE1_ADDRESS         ((uint32_t)0x40023C15)
+/** 
+  * @brief   OPTCR register byte 2 (Bits[23:16]) base address  
+  */ 
+#define OPTCR_BYTE2_ADDRESS         ((uint32_t)0x40023C16)
+/** 
+  * @brief   OPTCR register byte 3 (Bits[31:24]) base address  
+  */ 
+#define OPTCR_BYTE3_ADDRESS         ((uint32_t)0x40023C17)
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__: FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  * @retval none
+  */ 
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval none
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()  (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval none
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+  * @brief  Enable the FLASH instruction cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE()  (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+  * @brief  Disable the FLASH instruction cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+  * @brief  Enable the FLASH data cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_DATA_CACHE_ENABLE()  (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+  * @brief  Disable the FLASH data cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_DATA_CACHE_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+  * @brief  Resets the FLASH instruction Cache.
+  * @note   This function must be used only when the Instruction Cache is disabled.  
+  * @retval None
+  */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET()  (FLASH->ACR |= FLASH_ACR_ICRST)
+
+/**
+  * @brief  Resets the FLASH data Cache.
+  * @note   This function must be used only when the data Cache is disabled.  
+  * @retval None
+  */
+#define __HAL_FLASH_DATA_CACHE_RESET()  (FLASH->ACR |= FLASH_ACR_DCRST)
+
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__: specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+  *            @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) 
+  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   ((FLASH->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__: specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag 
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+  *            @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)   
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   (FLASH->SR = (__FLAG__))
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Program operation functions  ***********************************************/
+HAL_StatusTypeDef   HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef   HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void                HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void         HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void         HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/* Peripheral Control functions  **********************************************/
+HAL_StatusTypeDef   HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef   HAL_FLASH_Lock(void);
+HAL_StatusTypeDef   HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef   HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef   HAL_FLASH_OB_Launch(void);
+
+/* Peripheral State functions  ************************************************/
+FLASH_ErrorTypeDef  HAL_FLASH_GetError(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/