雄介 太田
mbed(SerialHalfDuplex入り)
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F303RE/stm32f3xx_hal_usart.h@98:01a414ca7d6d, 2015-04-08 (annotated)
- Committer:
- yusuke_kyo
- Date:
- Wed Apr 08 08:04:18 2015 +0000
- Revision:
- 98:01a414ca7d6d
- Parent:
- 93:e188a91d3eaa
remove SerialHalfDuplex.h
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Kojto | 93:e188a91d3eaa | 1 | /** |
| Kojto | 93:e188a91d3eaa | 2 | ****************************************************************************** |
| Kojto | 93:e188a91d3eaa | 3 | * @file stm32f3xx_hal_usart.h |
| Kojto | 93:e188a91d3eaa | 4 | * @author MCD Application Team |
| Kojto | 93:e188a91d3eaa | 5 | * @version V1.1.0 |
| Kojto | 93:e188a91d3eaa | 6 | * @date 12-Sept-2014 |
| Kojto | 93:e188a91d3eaa | 7 | * @brief Header file of USART HAL module. |
| Kojto | 93:e188a91d3eaa | 8 | ****************************************************************************** |
| Kojto | 93:e188a91d3eaa | 9 | * @attention |
| Kojto | 93:e188a91d3eaa | 10 | * |
| Kojto | 93:e188a91d3eaa | 11 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
| Kojto | 93:e188a91d3eaa | 12 | * |
| Kojto | 93:e188a91d3eaa | 13 | * Redistribution and use in source and binary forms, with or without modification, |
| Kojto | 93:e188a91d3eaa | 14 | * are permitted provided that the following conditions are met: |
| Kojto | 93:e188a91d3eaa | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
| Kojto | 93:e188a91d3eaa | 16 | * this list of conditions and the following disclaimer. |
| Kojto | 93:e188a91d3eaa | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| Kojto | 93:e188a91d3eaa | 18 | * this list of conditions and the following disclaimer in the documentation |
| Kojto | 93:e188a91d3eaa | 19 | * and/or other materials provided with the distribution. |
| Kojto | 93:e188a91d3eaa | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| Kojto | 93:e188a91d3eaa | 21 | * may be used to endorse or promote products derived from this software |
| Kojto | 93:e188a91d3eaa | 22 | * without specific prior written permission. |
| Kojto | 93:e188a91d3eaa | 23 | * |
| Kojto | 93:e188a91d3eaa | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| Kojto | 93:e188a91d3eaa | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| Kojto | 93:e188a91d3eaa | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| Kojto | 93:e188a91d3eaa | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| Kojto | 93:e188a91d3eaa | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| Kojto | 93:e188a91d3eaa | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| Kojto | 93:e188a91d3eaa | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| Kojto | 93:e188a91d3eaa | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| Kojto | 93:e188a91d3eaa | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| Kojto | 93:e188a91d3eaa | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| Kojto | 93:e188a91d3eaa | 34 | * |
| Kojto | 93:e188a91d3eaa | 35 | ****************************************************************************** |
| Kojto | 93:e188a91d3eaa | 36 | */ |
| Kojto | 93:e188a91d3eaa | 37 | |
| Kojto | 93:e188a91d3eaa | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 39 | #ifndef __STM32F3xx_HAL_USART_H |
| Kojto | 93:e188a91d3eaa | 40 | #define __STM32F3xx_HAL_USART_H |
| Kojto | 93:e188a91d3eaa | 41 | |
| Kojto | 93:e188a91d3eaa | 42 | #ifdef __cplusplus |
| Kojto | 93:e188a91d3eaa | 43 | extern "C" { |
| Kojto | 93:e188a91d3eaa | 44 | #endif |
| Kojto | 93:e188a91d3eaa | 45 | |
| Kojto | 93:e188a91d3eaa | 46 | /* Includes ------------------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 47 | #include "stm32f3xx_hal_def.h" |
| Kojto | 93:e188a91d3eaa | 48 | |
| Kojto | 93:e188a91d3eaa | 49 | /** @addtogroup STM32F3xx_HAL_Driver |
| Kojto | 93:e188a91d3eaa | 50 | * @{ |
| Kojto | 93:e188a91d3eaa | 51 | */ |
| Kojto | 93:e188a91d3eaa | 52 | |
| Kojto | 93:e188a91d3eaa | 53 | /** @addtogroup USART |
| Kojto | 93:e188a91d3eaa | 54 | * @{ |
| Kojto | 93:e188a91d3eaa | 55 | */ |
| Kojto | 93:e188a91d3eaa | 56 | |
| Kojto | 93:e188a91d3eaa | 57 | /* Exported types ------------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 58 | /** @defgroup USART_Exported_Types USART Exported Types |
| Kojto | 93:e188a91d3eaa | 59 | * @{ |
| Kojto | 93:e188a91d3eaa | 60 | */ |
| Kojto | 93:e188a91d3eaa | 61 | |
| Kojto | 93:e188a91d3eaa | 62 | /** |
| Kojto | 93:e188a91d3eaa | 63 | * @brief USART Init Structure definition |
| Kojto | 93:e188a91d3eaa | 64 | */ |
| Kojto | 93:e188a91d3eaa | 65 | typedef struct |
| Kojto | 93:e188a91d3eaa | 66 | { |
| Kojto | 93:e188a91d3eaa | 67 | uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. |
| Kojto | 93:e188a91d3eaa | 68 | The baud rate is computed using the following formula: |
| Kojto | 93:e188a91d3eaa | 69 | Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */ |
| Kojto | 93:e188a91d3eaa | 70 | |
| Kojto | 93:e188a91d3eaa | 71 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
| Kojto | 93:e188a91d3eaa | 72 | This parameter can be a value of @ref USARTEx_Word_Length */ |
| Kojto | 93:e188a91d3eaa | 73 | |
| Kojto | 93:e188a91d3eaa | 74 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. |
| Kojto | 93:e188a91d3eaa | 75 | This parameter can be a value of @ref USART_Stop_Bits */ |
| Kojto | 93:e188a91d3eaa | 76 | |
| Kojto | 93:e188a91d3eaa | 77 | uint32_t Parity; /*!< Specifies the parity mode. |
| Kojto | 93:e188a91d3eaa | 78 | This parameter can be a value of @ref USART_Parity |
| Kojto | 93:e188a91d3eaa | 79 | @note When parity is enabled, the computed parity is inserted |
| Kojto | 93:e188a91d3eaa | 80 | at the MSB position of the transmitted data (9th bit when |
| Kojto | 93:e188a91d3eaa | 81 | the word length is set to 9 data bits; 8th bit when the |
| Kojto | 93:e188a91d3eaa | 82 | word length is set to 8 data bits). */ |
| Kojto | 93:e188a91d3eaa | 83 | |
| Kojto | 93:e188a91d3eaa | 84 | uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
| Kojto | 93:e188a91d3eaa | 85 | This parameter can be a value of @ref USART_Mode */ |
| Kojto | 93:e188a91d3eaa | 86 | |
| Kojto | 93:e188a91d3eaa | 87 | uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. |
| Kojto | 93:e188a91d3eaa | 88 | This parameter can be a value of @ref USART_Clock_Polarity */ |
| Kojto | 93:e188a91d3eaa | 89 | |
| Kojto | 93:e188a91d3eaa | 90 | uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. |
| Kojto | 93:e188a91d3eaa | 91 | This parameter can be a value of @ref USART_Clock_Phase */ |
| Kojto | 93:e188a91d3eaa | 92 | |
| Kojto | 93:e188a91d3eaa | 93 | uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted |
| Kojto | 93:e188a91d3eaa | 94 | data bit (MSB) has to be output on the SCLK pin in synchronous mode. |
| Kojto | 93:e188a91d3eaa | 95 | This parameter can be a value of @ref USART_Last_Bit */ |
| Kojto | 93:e188a91d3eaa | 96 | }USART_InitTypeDef; |
| Kojto | 93:e188a91d3eaa | 97 | |
| Kojto | 93:e188a91d3eaa | 98 | /** |
| Kojto | 93:e188a91d3eaa | 99 | * @brief HAL State structures definition |
| Kojto | 93:e188a91d3eaa | 100 | */ |
| Kojto | 93:e188a91d3eaa | 101 | typedef enum |
| Kojto | 93:e188a91d3eaa | 102 | { |
| Kojto | 93:e188a91d3eaa | 103 | HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ |
| Kojto | 93:e188a91d3eaa | 104 | HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| Kojto | 93:e188a91d3eaa | 105 | HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
| Kojto | 93:e188a91d3eaa | 106 | HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| Kojto | 93:e188a91d3eaa | 107 | HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| Kojto | 93:e188a91d3eaa | 108 | HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */ |
| Kojto | 93:e188a91d3eaa | 109 | HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| Kojto | 93:e188a91d3eaa | 110 | HAL_USART_STATE_ERROR = 0x04 /*!< Error */ |
| Kojto | 93:e188a91d3eaa | 111 | }HAL_USART_StateTypeDef; |
| Kojto | 93:e188a91d3eaa | 112 | |
| Kojto | 93:e188a91d3eaa | 113 | /** |
| Kojto | 93:e188a91d3eaa | 114 | * @brief HAL USART Error Code structure definition |
| Kojto | 93:e188a91d3eaa | 115 | */ |
| Kojto | 93:e188a91d3eaa | 116 | typedef enum |
| Kojto | 93:e188a91d3eaa | 117 | { |
| Kojto | 93:e188a91d3eaa | 118 | HAL_USART_ERROR_NONE = 0x00, /*!< No error */ |
| Kojto | 93:e188a91d3eaa | 119 | HAL_USART_ERROR_PE = 0x01, /*!< Parity error */ |
| Kojto | 93:e188a91d3eaa | 120 | HAL_USART_ERROR_NE = 0x02, /*!< Noise error */ |
| Kojto | 93:e188a91d3eaa | 121 | HAL_USART_ERROR_FE = 0x04, /*!< frame error */ |
| Kojto | 93:e188a91d3eaa | 122 | HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */ |
| Kojto | 93:e188a91d3eaa | 123 | HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */ |
| Kojto | 93:e188a91d3eaa | 124 | }HAL_USART_ErrorTypeDef; |
| Kojto | 93:e188a91d3eaa | 125 | |
| Kojto | 93:e188a91d3eaa | 126 | /** |
| Kojto | 93:e188a91d3eaa | 127 | * @brief USART clock sources definitions |
| Kojto | 93:e188a91d3eaa | 128 | */ |
| Kojto | 93:e188a91d3eaa | 129 | typedef enum |
| Kojto | 93:e188a91d3eaa | 130 | { |
| Kojto | 93:e188a91d3eaa | 131 | USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ |
| Kojto | 93:e188a91d3eaa | 132 | USART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */ |
| Kojto | 93:e188a91d3eaa | 133 | USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ |
| Kojto | 93:e188a91d3eaa | 134 | USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ |
| Kojto | 93:e188a91d3eaa | 135 | USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */ |
| Kojto | 93:e188a91d3eaa | 136 | USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */ |
| Kojto | 93:e188a91d3eaa | 137 | }USART_ClockSourceTypeDef; |
| Kojto | 93:e188a91d3eaa | 138 | |
| Kojto | 93:e188a91d3eaa | 139 | |
| Kojto | 93:e188a91d3eaa | 140 | /** |
| Kojto | 93:e188a91d3eaa | 141 | * @brief USART handle Structure definition |
| Kojto | 93:e188a91d3eaa | 142 | */ |
| Kojto | 93:e188a91d3eaa | 143 | typedef struct |
| Kojto | 93:e188a91d3eaa | 144 | { |
| Kojto | 93:e188a91d3eaa | 145 | USART_TypeDef *Instance; /*!< USART registers base address */ |
| Kojto | 93:e188a91d3eaa | 146 | |
| Kojto | 93:e188a91d3eaa | 147 | USART_InitTypeDef Init; /*!< USART communication parameters */ |
| Kojto | 93:e188a91d3eaa | 148 | |
| Kojto | 93:e188a91d3eaa | 149 | uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ |
| Kojto | 93:e188a91d3eaa | 150 | |
| Kojto | 93:e188a91d3eaa | 151 | uint16_t TxXferSize; /*!< USART Tx Transfer size */ |
| Kojto | 93:e188a91d3eaa | 152 | |
| Kojto | 93:e188a91d3eaa | 153 | uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ |
| Kojto | 93:e188a91d3eaa | 154 | |
| Kojto | 93:e188a91d3eaa | 155 | uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ |
| Kojto | 93:e188a91d3eaa | 156 | |
| Kojto | 93:e188a91d3eaa | 157 | uint16_t RxXferSize; /*!< USART Rx Transfer size */ |
| Kojto | 93:e188a91d3eaa | 158 | |
| Kojto | 93:e188a91d3eaa | 159 | uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ |
| Kojto | 93:e188a91d3eaa | 160 | |
| Kojto | 93:e188a91d3eaa | 161 | uint16_t Mask; /*!< USART Rx RDR register mask */ |
| Kojto | 93:e188a91d3eaa | 162 | |
| Kojto | 93:e188a91d3eaa | 163 | DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ |
| Kojto | 93:e188a91d3eaa | 164 | |
| Kojto | 93:e188a91d3eaa | 165 | DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ |
| Kojto | 93:e188a91d3eaa | 166 | |
| Kojto | 93:e188a91d3eaa | 167 | HAL_LockTypeDef Lock; /*!< Locking object */ |
| Kojto | 93:e188a91d3eaa | 168 | |
| Kojto | 93:e188a91d3eaa | 169 | HAL_USART_StateTypeDef State; /*!< USART communication state */ |
| Kojto | 93:e188a91d3eaa | 170 | |
| Kojto | 93:e188a91d3eaa | 171 | HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */ |
| Kojto | 93:e188a91d3eaa | 172 | |
| Kojto | 93:e188a91d3eaa | 173 | }USART_HandleTypeDef; |
| Kojto | 93:e188a91d3eaa | 174 | |
| Kojto | 93:e188a91d3eaa | 175 | /** |
| Kojto | 93:e188a91d3eaa | 176 | * @} |
| Kojto | 93:e188a91d3eaa | 177 | */ |
| Kojto | 93:e188a91d3eaa | 178 | |
| Kojto | 93:e188a91d3eaa | 179 | /* Exported constants --------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 180 | |
| Kojto | 93:e188a91d3eaa | 181 | /** @defgroup USART_Exported_Constants USART Exported Constants |
| Kojto | 93:e188a91d3eaa | 182 | * @{ |
| Kojto | 93:e188a91d3eaa | 183 | */ |
| Kojto | 93:e188a91d3eaa | 184 | |
| Kojto | 93:e188a91d3eaa | 185 | /** @defgroup USART_Stop_Bits USART Number of Stop Bits |
| Kojto | 93:e188a91d3eaa | 186 | * @{ |
| Kojto | 93:e188a91d3eaa | 187 | */ |
| Kojto | 93:e188a91d3eaa | 188 | #define USART_STOPBITS_1 ((uint32_t)0x0000) |
| Kojto | 93:e188a91d3eaa | 189 | #define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) |
| Kojto | 93:e188a91d3eaa | 190 | #define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) |
| Kojto | 93:e188a91d3eaa | 191 | #define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) |
| Kojto | 93:e188a91d3eaa | 192 | #define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \ |
| Kojto | 93:e188a91d3eaa | 193 | ((STOPBITS) == USART_STOPBITS_0_5) || \ |
| Kojto | 93:e188a91d3eaa | 194 | ((STOPBITS) == USART_STOPBITS_1_5) || \ |
| Kojto | 93:e188a91d3eaa | 195 | ((STOPBITS) == USART_STOPBITS_2)) |
| Kojto | 93:e188a91d3eaa | 196 | /** |
| Kojto | 93:e188a91d3eaa | 197 | * @} |
| Kojto | 93:e188a91d3eaa | 198 | */ |
| Kojto | 93:e188a91d3eaa | 199 | |
| Kojto | 93:e188a91d3eaa | 200 | /** @defgroup USART_Parity USART Parity |
| Kojto | 93:e188a91d3eaa | 201 | * @{ |
| Kojto | 93:e188a91d3eaa | 202 | */ |
| Kojto | 93:e188a91d3eaa | 203 | #define USART_PARITY_NONE ((uint32_t)0x0000) |
| Kojto | 93:e188a91d3eaa | 204 | #define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| Kojto | 93:e188a91d3eaa | 205 | #define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| Kojto | 93:e188a91d3eaa | 206 | #define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \ |
| Kojto | 93:e188a91d3eaa | 207 | ((PARITY) == USART_PARITY_EVEN) || \ |
| Kojto | 93:e188a91d3eaa | 208 | ((PARITY) == USART_PARITY_ODD)) |
| Kojto | 93:e188a91d3eaa | 209 | /** |
| Kojto | 93:e188a91d3eaa | 210 | * @} |
| Kojto | 93:e188a91d3eaa | 211 | */ |
| Kojto | 93:e188a91d3eaa | 212 | |
| Kojto | 93:e188a91d3eaa | 213 | /** @defgroup USART_Mode USART Mode |
| Kojto | 93:e188a91d3eaa | 214 | * @{ |
| Kojto | 93:e188a91d3eaa | 215 | */ |
| Kojto | 93:e188a91d3eaa | 216 | #define USART_MODE_RX ((uint32_t)USART_CR1_RE) |
| Kojto | 93:e188a91d3eaa | 217 | #define USART_MODE_TX ((uint32_t)USART_CR1_TE) |
| Kojto | 93:e188a91d3eaa | 218 | #define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| Kojto | 93:e188a91d3eaa | 219 | #define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00)) |
| Kojto | 93:e188a91d3eaa | 220 | /** |
| Kojto | 93:e188a91d3eaa | 221 | * @} |
| Kojto | 93:e188a91d3eaa | 222 | */ |
| Kojto | 93:e188a91d3eaa | 223 | |
| Kojto | 93:e188a91d3eaa | 224 | /** @defgroup USART_Clock USART Clock |
| Kojto | 93:e188a91d3eaa | 225 | * @{ |
| Kojto | 93:e188a91d3eaa | 226 | */ |
| Kojto | 93:e188a91d3eaa | 227 | #define USART_CLOCK_DISABLED ((uint32_t)0x0000) |
| Kojto | 93:e188a91d3eaa | 228 | #define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN) |
| Kojto | 93:e188a91d3eaa | 229 | #define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \ |
| Kojto | 93:e188a91d3eaa | 230 | ((CLOCK) == USART_CLOCK_ENABLED)) |
| Kojto | 93:e188a91d3eaa | 231 | /** |
| Kojto | 93:e188a91d3eaa | 232 | * @} |
| Kojto | 93:e188a91d3eaa | 233 | */ |
| Kojto | 93:e188a91d3eaa | 234 | |
| Kojto | 93:e188a91d3eaa | 235 | /** @defgroup USART_Clock_Polarity USART Clock Polarity |
| Kojto | 93:e188a91d3eaa | 236 | * @{ |
| Kojto | 93:e188a91d3eaa | 237 | */ |
| Kojto | 93:e188a91d3eaa | 238 | #define USART_POLARITY_LOW ((uint32_t)0x0000) |
| Kojto | 93:e188a91d3eaa | 239 | #define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) |
| Kojto | 93:e188a91d3eaa | 240 | #define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH)) |
| Kojto | 93:e188a91d3eaa | 241 | /** |
| Kojto | 93:e188a91d3eaa | 242 | * @} |
| Kojto | 93:e188a91d3eaa | 243 | */ |
| Kojto | 93:e188a91d3eaa | 244 | |
| Kojto | 93:e188a91d3eaa | 245 | /** @defgroup USART_Clock_Phase USART Clock Phase |
| Kojto | 93:e188a91d3eaa | 246 | * @{ |
| Kojto | 93:e188a91d3eaa | 247 | */ |
| Kojto | 93:e188a91d3eaa | 248 | #define USART_PHASE_1EDGE ((uint32_t)0x0000) |
| Kojto | 93:e188a91d3eaa | 249 | #define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) |
| Kojto | 93:e188a91d3eaa | 250 | #define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE)) |
| Kojto | 93:e188a91d3eaa | 251 | /** |
| Kojto | 93:e188a91d3eaa | 252 | * @} |
| Kojto | 93:e188a91d3eaa | 253 | */ |
| Kojto | 93:e188a91d3eaa | 254 | |
| Kojto | 93:e188a91d3eaa | 255 | /** @defgroup USART_Last_Bit USART Last Bit |
| Kojto | 93:e188a91d3eaa | 256 | * @{ |
| Kojto | 93:e188a91d3eaa | 257 | */ |
| Kojto | 93:e188a91d3eaa | 258 | #define USART_LASTBIT_DISABLE ((uint32_t)0x0000) |
| Kojto | 93:e188a91d3eaa | 259 | #define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) |
| Kojto | 93:e188a91d3eaa | 260 | #define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \ |
| Kojto | 93:e188a91d3eaa | 261 | ((LASTBIT) == USART_LASTBIT_ENABLE)) |
| Kojto | 93:e188a91d3eaa | 262 | /** |
| Kojto | 93:e188a91d3eaa | 263 | * @} |
| Kojto | 93:e188a91d3eaa | 264 | */ |
| Kojto | 93:e188a91d3eaa | 265 | |
| Kojto | 93:e188a91d3eaa | 266 | |
| Kojto | 93:e188a91d3eaa | 267 | /** @defgroup USART_Flags USART Flags |
| Kojto | 93:e188a91d3eaa | 268 | * Elements values convention: 0xXXXX |
| Kojto | 93:e188a91d3eaa | 269 | * - 0xXXXX : Flag mask in the ISR register |
| Kojto | 93:e188a91d3eaa | 270 | * @{ |
| Kojto | 93:e188a91d3eaa | 271 | */ |
| Kojto | 93:e188a91d3eaa | 272 | #define USART_FLAG_REACK ((uint32_t)0x00400000) |
| Kojto | 93:e188a91d3eaa | 273 | #define USART_FLAG_TEACK ((uint32_t)0x00200000) |
| Kojto | 93:e188a91d3eaa | 274 | #define USART_FLAG_BUSY ((uint32_t)0x00010000) |
| Kojto | 93:e188a91d3eaa | 275 | #define USART_FLAG_CTS ((uint32_t)0x00000400) |
| Kojto | 93:e188a91d3eaa | 276 | #define USART_FLAG_CTSIF ((uint32_t)0x00000200) |
| Kojto | 93:e188a91d3eaa | 277 | #define USART_FLAG_LBDF ((uint32_t)0x00000100) |
| Kojto | 93:e188a91d3eaa | 278 | #define USART_FLAG_TXE ((uint32_t)0x00000080) |
| Kojto | 93:e188a91d3eaa | 279 | #define USART_FLAG_TC ((uint32_t)0x00000040) |
| Kojto | 93:e188a91d3eaa | 280 | #define USART_FLAG_RXNE ((uint32_t)0x00000020) |
| Kojto | 93:e188a91d3eaa | 281 | #define USART_FLAG_IDLE ((uint32_t)0x00000010) |
| Kojto | 93:e188a91d3eaa | 282 | #define USART_FLAG_ORE ((uint32_t)0x00000008) |
| Kojto | 93:e188a91d3eaa | 283 | #define USART_FLAG_NE ((uint32_t)0x00000004) |
| Kojto | 93:e188a91d3eaa | 284 | #define USART_FLAG_FE ((uint32_t)0x00000002) |
| Kojto | 93:e188a91d3eaa | 285 | #define USART_FLAG_PE ((uint32_t)0x00000001) |
| Kojto | 93:e188a91d3eaa | 286 | /** |
| Kojto | 93:e188a91d3eaa | 287 | * @} |
| Kojto | 93:e188a91d3eaa | 288 | */ |
| Kojto | 93:e188a91d3eaa | 289 | |
| Kojto | 93:e188a91d3eaa | 290 | /** @defgroup USART_Interrupt_definition USART Interrupts Definition |
| Kojto | 93:e188a91d3eaa | 291 | * Elements values convention: 0000ZZZZ0XXYYYYYb |
| Kojto | 93:e188a91d3eaa | 292 | * - YYYYY : Interrupt source position in the XX register (5bits) |
| Kojto | 93:e188a91d3eaa | 293 | * - XX : Interrupt source register (2bits) |
| Kojto | 93:e188a91d3eaa | 294 | * - 01: CR1 register |
| Kojto | 93:e188a91d3eaa | 295 | * - 10: CR2 register |
| Kojto | 93:e188a91d3eaa | 296 | * - 11: CR3 register |
| Kojto | 93:e188a91d3eaa | 297 | * - ZZZZ : Flag position in the ISR register(4bits) |
| Kojto | 93:e188a91d3eaa | 298 | * @{ |
| Kojto | 93:e188a91d3eaa | 299 | */ |
| Kojto | 93:e188a91d3eaa | 300 | |
| Kojto | 93:e188a91d3eaa | 301 | #define USART_IT_PE ((uint16_t)0x0028) |
| Kojto | 93:e188a91d3eaa | 302 | #define USART_IT_TXE ((uint16_t)0x0727) |
| Kojto | 93:e188a91d3eaa | 303 | #define USART_IT_TC ((uint16_t)0x0626) |
| Kojto | 93:e188a91d3eaa | 304 | #define USART_IT_RXNE ((uint16_t)0x0525) |
| Kojto | 93:e188a91d3eaa | 305 | #define USART_IT_IDLE ((uint16_t)0x0424) |
| Kojto | 93:e188a91d3eaa | 306 | #define USART_IT_ERR ((uint16_t)0x0060) |
| Kojto | 93:e188a91d3eaa | 307 | |
| Kojto | 93:e188a91d3eaa | 308 | #define USART_IT_ORE ((uint16_t)0x0300) |
| Kojto | 93:e188a91d3eaa | 309 | #define USART_IT_NE ((uint16_t)0x0200) |
| Kojto | 93:e188a91d3eaa | 310 | #define USART_IT_FE ((uint16_t)0x0100) |
| Kojto | 93:e188a91d3eaa | 311 | /** |
| Kojto | 93:e188a91d3eaa | 312 | * @} |
| Kojto | 93:e188a91d3eaa | 313 | */ |
| Kojto | 93:e188a91d3eaa | 314 | |
| Kojto | 93:e188a91d3eaa | 315 | /** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags |
| Kojto | 93:e188a91d3eaa | 316 | * @{ |
| Kojto | 93:e188a91d3eaa | 317 | */ |
| Kojto | 93:e188a91d3eaa | 318 | #define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 319 | #define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 320 | #define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 321 | #define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 322 | #define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 323 | #define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 324 | #define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ |
| Kojto | 93:e188a91d3eaa | 325 | /** |
| Kojto | 93:e188a91d3eaa | 326 | * @} |
| Kojto | 93:e188a91d3eaa | 327 | */ |
| Kojto | 93:e188a91d3eaa | 328 | |
| Kojto | 93:e188a91d3eaa | 329 | /** @defgroup USART_Request_Parameters USART Request Parameters |
| Kojto | 93:e188a91d3eaa | 330 | * @{ |
| Kojto | 93:e188a91d3eaa | 331 | */ |
| Kojto | 93:e188a91d3eaa | 332 | #define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ |
| Kojto | 93:e188a91d3eaa | 333 | #define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ |
| Kojto | 93:e188a91d3eaa | 334 | #define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \ |
| Kojto | 93:e188a91d3eaa | 335 | ((PARAM) == USART_TXDATA_FLUSH_REQUEST)) |
| Kojto | 93:e188a91d3eaa | 336 | /** |
| Kojto | 93:e188a91d3eaa | 337 | * @} |
| Kojto | 93:e188a91d3eaa | 338 | */ |
| Kojto | 93:e188a91d3eaa | 339 | |
| Kojto | 93:e188a91d3eaa | 340 | /** @defgroup USART_Interruption_Mask USART interruptions flag mask |
| Kojto | 93:e188a91d3eaa | 341 | * @{ |
| Kojto | 93:e188a91d3eaa | 342 | */ |
| Kojto | 93:e188a91d3eaa | 343 | #define USART_IT_MASK ((uint16_t)0x001F) |
| Kojto | 93:e188a91d3eaa | 344 | /** |
| Kojto | 93:e188a91d3eaa | 345 | * @} |
| Kojto | 93:e188a91d3eaa | 346 | */ |
| Kojto | 93:e188a91d3eaa | 347 | |
| Kojto | 93:e188a91d3eaa | 348 | /** |
| Kojto | 93:e188a91d3eaa | 349 | * @} |
| Kojto | 93:e188a91d3eaa | 350 | */ |
| Kojto | 93:e188a91d3eaa | 351 | |
| Kojto | 93:e188a91d3eaa | 352 | |
| Kojto | 93:e188a91d3eaa | 353 | /* Exported macros ------------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 354 | |
| Kojto | 93:e188a91d3eaa | 355 | /** @defgroup USART_Exported_Macros USART Exported Macros |
| Kojto | 93:e188a91d3eaa | 356 | * @{ |
| Kojto | 93:e188a91d3eaa | 357 | */ |
| Kojto | 93:e188a91d3eaa | 358 | |
| Kojto | 93:e188a91d3eaa | 359 | /** @brief Reset USART handle state |
| Kojto | 93:e188a91d3eaa | 360 | * @param __HANDLE__: USART handle. |
| Kojto | 93:e188a91d3eaa | 361 | * @retval None |
| Kojto | 93:e188a91d3eaa | 362 | */ |
| Kojto | 93:e188a91d3eaa | 363 | #define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) |
| Kojto | 93:e188a91d3eaa | 364 | |
| Kojto | 93:e188a91d3eaa | 365 | |
| Kojto | 93:e188a91d3eaa | 366 | /** @brief Checks whether the specified USART flag is set or not. |
| Kojto | 93:e188a91d3eaa | 367 | * @param __HANDLE__: specifies the USART Handle |
| Kojto | 93:e188a91d3eaa | 368 | * @param __FLAG__: specifies the flag to check. |
| Kojto | 93:e188a91d3eaa | 369 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 370 | * @arg USART_FLAG_REACK: Receive enable ackowledge flag |
| Kojto | 93:e188a91d3eaa | 371 | * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag |
| Kojto | 93:e188a91d3eaa | 372 | * @arg USART_FLAG_BUSY: Busy flag |
| Kojto | 93:e188a91d3eaa | 373 | * @arg USART_FLAG_CTS: CTS Change flag |
| Kojto | 93:e188a91d3eaa | 374 | * @arg USART_FLAG_TXE: Transmit data register empty flag |
| Kojto | 93:e188a91d3eaa | 375 | * @arg USART_FLAG_TC: Transmission Complete flag |
| Kojto | 93:e188a91d3eaa | 376 | * @arg USART_FLAG_RXNE: Receive data register not empty flag |
| Kojto | 93:e188a91d3eaa | 377 | * @arg USART_FLAG_IDLE: Idle Line detection flag |
| Kojto | 93:e188a91d3eaa | 378 | * @arg USART_FLAG_ORE: OverRun Error flag |
| Kojto | 93:e188a91d3eaa | 379 | * @arg USART_FLAG_NE: Noise Error flag |
| Kojto | 93:e188a91d3eaa | 380 | * @arg USART_FLAG_FE: Framing Error flag |
| Kojto | 93:e188a91d3eaa | 381 | * @arg USART_FLAG_PE: Parity Error flag |
| Kojto | 93:e188a91d3eaa | 382 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
| Kojto | 93:e188a91d3eaa | 383 | */ |
| Kojto | 93:e188a91d3eaa | 384 | #define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) |
| Kojto | 93:e188a91d3eaa | 385 | |
| Kojto | 93:e188a91d3eaa | 386 | |
| Kojto | 93:e188a91d3eaa | 387 | /** @brief Enables the specified USART interrupt. |
| Kojto | 93:e188a91d3eaa | 388 | * @param __HANDLE__: specifies the USART Handle |
| Kojto | 93:e188a91d3eaa | 389 | * @param __INTERRUPT__: specifies the USART interrupt source to enable. |
| Kojto | 93:e188a91d3eaa | 390 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 391 | * @arg USART_IT_TXE: Transmit Data Register empty interrupt |
| Kojto | 93:e188a91d3eaa | 392 | * @arg USART_IT_TC: Transmission complete interrupt |
| Kojto | 93:e188a91d3eaa | 393 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt |
| Kojto | 93:e188a91d3eaa | 394 | * @arg USART_IT_IDLE: Idle line detection interrupt |
| Kojto | 93:e188a91d3eaa | 395 | * @arg USART_IT_PE: Parity Error interrupt |
| Kojto | 93:e188a91d3eaa | 396 | * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| Kojto | 93:e188a91d3eaa | 397 | * @retval None |
| Kojto | 93:e188a91d3eaa | 398 | */ |
| Kojto | 93:e188a91d3eaa | 399 | #define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ |
| Kojto | 93:e188a91d3eaa | 400 | ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ |
| Kojto | 93:e188a91d3eaa | 401 | ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK)))) |
| Kojto | 93:e188a91d3eaa | 402 | |
| Kojto | 93:e188a91d3eaa | 403 | /** @brief Disables the specified USART interrupt. |
| Kojto | 93:e188a91d3eaa | 404 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 93:e188a91d3eaa | 405 | * @param __INTERRUPT__: specifies the USART interrupt source to disable. |
| Kojto | 93:e188a91d3eaa | 406 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 407 | * @arg USART_IT_TXE: Transmit Data Register empty interrupt |
| Kojto | 93:e188a91d3eaa | 408 | * @arg USART_IT_TC: Transmission complete interrupt |
| Kojto | 93:e188a91d3eaa | 409 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt |
| Kojto | 93:e188a91d3eaa | 410 | * @arg USART_IT_IDLE: Idle line detection interrupt |
| Kojto | 93:e188a91d3eaa | 411 | * @arg USART_IT_PE: Parity Error interrupt |
| Kojto | 93:e188a91d3eaa | 412 | * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| Kojto | 93:e188a91d3eaa | 413 | * @retval None |
| Kojto | 93:e188a91d3eaa | 414 | */ |
| Kojto | 93:e188a91d3eaa | 415 | #define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ |
| Kojto | 93:e188a91d3eaa | 416 | ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \ |
| Kojto | 93:e188a91d3eaa | 417 | ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK)))) |
| Kojto | 93:e188a91d3eaa | 418 | |
| Kojto | 93:e188a91d3eaa | 419 | |
| Kojto | 93:e188a91d3eaa | 420 | /** @brief Checks whether the specified USART interrupt has occurred or not. |
| Kojto | 93:e188a91d3eaa | 421 | * @param __HANDLE__: specifies the USART Handle |
| Kojto | 93:e188a91d3eaa | 422 | * @param __IT__: specifies the USART interrupt source to check. |
| Kojto | 93:e188a91d3eaa | 423 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 424 | * @arg USART_IT_TXE: Transmit Data Register empty interrupt |
| Kojto | 93:e188a91d3eaa | 425 | * @arg USART_IT_TC: Transmission complete interrupt |
| Kojto | 93:e188a91d3eaa | 426 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt |
| Kojto | 93:e188a91d3eaa | 427 | * @arg USART_IT_IDLE: Idle line detection interrupt |
| Kojto | 93:e188a91d3eaa | 428 | * @arg USART_IT_ORE: OverRun Error interrupt |
| Kojto | 93:e188a91d3eaa | 429 | * @arg USART_IT_NE: Noise Error interrupt |
| Kojto | 93:e188a91d3eaa | 430 | * @arg USART_IT_FE: Framing Error interrupt |
| Kojto | 93:e188a91d3eaa | 431 | * @arg USART_IT_PE: Parity Error interrupt |
| Kojto | 93:e188a91d3eaa | 432 | * @retval The new state of __IT__ (TRUE or FALSE). |
| Kojto | 93:e188a91d3eaa | 433 | */ |
| Kojto | 93:e188a91d3eaa | 434 | #define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) |
| Kojto | 93:e188a91d3eaa | 435 | |
| Kojto | 93:e188a91d3eaa | 436 | /** @brief Checks whether the specified USART interrupt source is enabled. |
| Kojto | 93:e188a91d3eaa | 437 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 93:e188a91d3eaa | 438 | * @param __IT__: specifies the USART interrupt source to check. |
| Kojto | 93:e188a91d3eaa | 439 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 440 | * @arg USART_IT_TXE: Transmit Data Register empty interrupt |
| Kojto | 93:e188a91d3eaa | 441 | * @arg USART_IT_TC: Transmission complete interrupt |
| Kojto | 93:e188a91d3eaa | 442 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt |
| Kojto | 93:e188a91d3eaa | 443 | * @arg USART_IT_IDLE: Idle line detection interrupt |
| Kojto | 93:e188a91d3eaa | 444 | * @arg USART_IT_ORE: OverRun Error interrupt |
| Kojto | 93:e188a91d3eaa | 445 | * @arg USART_IT_NE: Noise Error interrupt |
| Kojto | 93:e188a91d3eaa | 446 | * @arg USART_IT_FE: Framing Error interrupt |
| Kojto | 93:e188a91d3eaa | 447 | * @arg USART_IT_PE: Parity Error interrupt |
| Kojto | 93:e188a91d3eaa | 448 | * @retval The new state of __IT__ (TRUE or FALSE). |
| Kojto | 93:e188a91d3eaa | 449 | */ |
| Kojto | 93:e188a91d3eaa | 450 | #define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \ |
| Kojto | 93:e188a91d3eaa | 451 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \ |
| Kojto | 93:e188a91d3eaa | 452 | (((uint16_t)(__IT__)) & USART_IT_MASK))) |
| Kojto | 93:e188a91d3eaa | 453 | |
| Kojto | 93:e188a91d3eaa | 454 | |
| Kojto | 93:e188a91d3eaa | 455 | /** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag. |
| Kojto | 93:e188a91d3eaa | 456 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 93:e188a91d3eaa | 457 | * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set |
| Kojto | 93:e188a91d3eaa | 458 | * to clear the corresponding interrupt |
| Kojto | 93:e188a91d3eaa | 459 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 460 | * @arg USART_CLEAR_PEF: Parity Error Clear Flag |
| Kojto | 93:e188a91d3eaa | 461 | * @arg USART_CLEAR_FEF: Framing Error Clear Flag |
| Kojto | 93:e188a91d3eaa | 462 | * @arg USART_CLEAR_NEF: Noise detected Clear Flag |
| Kojto | 93:e188a91d3eaa | 463 | * @arg USART_CLEAR_OREF: OverRun Error Clear Flag |
| Kojto | 93:e188a91d3eaa | 464 | * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag |
| Kojto | 93:e188a91d3eaa | 465 | * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag |
| Kojto | 93:e188a91d3eaa | 466 | * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag |
| Kojto | 93:e188a91d3eaa | 467 | * @retval None |
| Kojto | 93:e188a91d3eaa | 468 | */ |
| Kojto | 93:e188a91d3eaa | 469 | #define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) |
| Kojto | 93:e188a91d3eaa | 470 | |
| Kojto | 93:e188a91d3eaa | 471 | /** @brief Set a specific USART request flag. |
| Kojto | 93:e188a91d3eaa | 472 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 93:e188a91d3eaa | 473 | * @param __REQ__: specifies the request flag to set |
| Kojto | 93:e188a91d3eaa | 474 | * This parameter can be one of the following values: |
| Kojto | 93:e188a91d3eaa | 475 | * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request |
| Kojto | 93:e188a91d3eaa | 476 | * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request |
| Kojto | 93:e188a91d3eaa | 477 | * |
| Kojto | 93:e188a91d3eaa | 478 | * @retval None |
| Kojto | 93:e188a91d3eaa | 479 | */ |
| Kojto | 93:e188a91d3eaa | 480 | #define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) |
| Kojto | 93:e188a91d3eaa | 481 | |
| Kojto | 93:e188a91d3eaa | 482 | /** @brief Enable USART |
| Kojto | 93:e188a91d3eaa | 483 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 93:e188a91d3eaa | 484 | * @retval None |
| Kojto | 93:e188a91d3eaa | 485 | */ |
| Kojto | 93:e188a91d3eaa | 486 | #define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
| Kojto | 93:e188a91d3eaa | 487 | |
| Kojto | 93:e188a91d3eaa | 488 | /** @brief Disable USART |
| Kojto | 93:e188a91d3eaa | 489 | * @param __HANDLE__: specifies the USART Handle. |
| Kojto | 93:e188a91d3eaa | 490 | * @retval None |
| Kojto | 93:e188a91d3eaa | 491 | */ |
| Kojto | 93:e188a91d3eaa | 492 | #define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
| Kojto | 93:e188a91d3eaa | 493 | |
| Kojto | 93:e188a91d3eaa | 494 | |
| Kojto | 93:e188a91d3eaa | 495 | /** @brief Check USART Baud rate |
| Kojto | 93:e188a91d3eaa | 496 | * @param BAUDRATE: Baudrate specified by the user |
| Kojto | 93:e188a91d3eaa | 497 | * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz) |
| Kojto | 93:e188a91d3eaa | 498 | * divided by the smallest oversampling used on the USART (i.e. 8) |
| Kojto | 93:e188a91d3eaa | 499 | * @retval Test result (TRUE or FALSE) |
| Kojto | 93:e188a91d3eaa | 500 | */ |
| Kojto | 93:e188a91d3eaa | 501 | #define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001) |
| Kojto | 93:e188a91d3eaa | 502 | |
| Kojto | 93:e188a91d3eaa | 503 | /** |
| Kojto | 93:e188a91d3eaa | 504 | * @} |
| Kojto | 93:e188a91d3eaa | 505 | */ |
| Kojto | 93:e188a91d3eaa | 506 | |
| Kojto | 93:e188a91d3eaa | 507 | /* Include USART HAL Extended module */ |
| Kojto | 93:e188a91d3eaa | 508 | #include "stm32f3xx_hal_usart_ex.h" |
| Kojto | 93:e188a91d3eaa | 509 | |
| Kojto | 93:e188a91d3eaa | 510 | /* Exported functions --------------------------------------------------------*/ |
| Kojto | 93:e188a91d3eaa | 511 | /** @addtogroup USART_Exported_Functions USART Exported Functions |
| Kojto | 93:e188a91d3eaa | 512 | * @{ |
| Kojto | 93:e188a91d3eaa | 513 | */ |
| Kojto | 93:e188a91d3eaa | 514 | |
| Kojto | 93:e188a91d3eaa | 515 | /** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions |
| Kojto | 93:e188a91d3eaa | 516 | * @brief Initialization and Configuration functions |
| Kojto | 93:e188a91d3eaa | 517 | * @{ |
| Kojto | 93:e188a91d3eaa | 518 | */ |
| Kojto | 93:e188a91d3eaa | 519 | /* Initialization and de-initialization functions ****************************/ |
| Kojto | 93:e188a91d3eaa | 520 | HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 521 | HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 522 | void HAL_USART_MspInit(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 523 | void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 524 | HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 525 | /** |
| Kojto | 93:e188a91d3eaa | 526 | * @} |
| Kojto | 93:e188a91d3eaa | 527 | */ |
| Kojto | 93:e188a91d3eaa | 528 | |
| Kojto | 93:e188a91d3eaa | 529 | /** @defgroup USART_Exported_Functions_Group2 Input and Output operation functions |
| Kojto | 93:e188a91d3eaa | 530 | * @brief USART Transmit/Receive functions |
| Kojto | 93:e188a91d3eaa | 531 | * @{ |
| Kojto | 93:e188a91d3eaa | 532 | */ |
| Kojto | 93:e188a91d3eaa | 533 | /* IO operation functions *****************************************************/ |
| Kojto | 93:e188a91d3eaa | 534 | HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); |
| Kojto | 93:e188a91d3eaa | 535 | HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); |
| Kojto | 93:e188a91d3eaa | 536 | HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); |
| Kojto | 93:e188a91d3eaa | 537 | HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); |
| Kojto | 93:e188a91d3eaa | 538 | HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); |
| Kojto | 93:e188a91d3eaa | 539 | HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); |
| Kojto | 93:e188a91d3eaa | 540 | HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); |
| Kojto | 93:e188a91d3eaa | 541 | HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); |
| Kojto | 93:e188a91d3eaa | 542 | HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); |
| Kojto | 93:e188a91d3eaa | 543 | HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 544 | HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 545 | HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 546 | void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 547 | void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 548 | void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 549 | void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 550 | void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 551 | void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 552 | void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 553 | /** |
| Kojto | 93:e188a91d3eaa | 554 | * @} |
| Kojto | 93:e188a91d3eaa | 555 | */ |
| Kojto | 93:e188a91d3eaa | 556 | |
| Kojto | 93:e188a91d3eaa | 557 | /** @defgroup USART_Exported_Functions_Group3 Peripheral Control functions |
| Kojto | 93:e188a91d3eaa | 558 | * @brief USART control functions |
| Kojto | 93:e188a91d3eaa | 559 | * @{ |
| Kojto | 93:e188a91d3eaa | 560 | */ |
| Kojto | 93:e188a91d3eaa | 561 | /* Peripheral Control functions ***********************************************/ |
| Kojto | 93:e188a91d3eaa | 562 | |
| Kojto | 93:e188a91d3eaa | 563 | /* Peripheral State and Error functions ***************************************/ |
| Kojto | 93:e188a91d3eaa | 564 | HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 565 | uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); |
| Kojto | 93:e188a91d3eaa | 566 | /** |
| Kojto | 93:e188a91d3eaa | 567 | * @} |
| Kojto | 93:e188a91d3eaa | 568 | */ |
| Kojto | 93:e188a91d3eaa | 569 | |
| Kojto | 93:e188a91d3eaa | 570 | /** |
| Kojto | 93:e188a91d3eaa | 571 | * @} |
| Kojto | 93:e188a91d3eaa | 572 | */ |
| Kojto | 93:e188a91d3eaa | 573 | |
| Kojto | 93:e188a91d3eaa | 574 | /** |
| Kojto | 93:e188a91d3eaa | 575 | * @} |
| Kojto | 93:e188a91d3eaa | 576 | */ |
| Kojto | 93:e188a91d3eaa | 577 | |
| Kojto | 93:e188a91d3eaa | 578 | /** |
| Kojto | 93:e188a91d3eaa | 579 | * @} |
| Kojto | 93:e188a91d3eaa | 580 | */ |
| Kojto | 93:e188a91d3eaa | 581 | |
| Kojto | 93:e188a91d3eaa | 582 | #ifdef __cplusplus |
| Kojto | 93:e188a91d3eaa | 583 | } |
| Kojto | 93:e188a91d3eaa | 584 | #endif |
| Kojto | 93:e188a91d3eaa | 585 | |
| Kojto | 93:e188a91d3eaa | 586 | #endif /* __STM32F3xx_HAL_USART_H */ |
| Kojto | 93:e188a91d3eaa | 587 | |
| Kojto | 93:e188a91d3eaa | 588 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |