Diff: examples/JVCPanasonicSendDemo/JVCPanasonicSendDemo.ino

Revision:

2:6bbd1e911324

Parent:

1:370967a90abb

Child:

3:17440cf7ab90

diff -r 370967a90abb -r 6bbd1e911324 examples/JVCPanasonicSendDemo/JVCPanasonicSendDemo.ino
--- a/examples/JVCPanasonicSendDemo/JVCPanasonicSendDemo.ino	Sat Jan 23 15:25:05 2016 +0900
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,29 +0,0 @@
-/*
- * IRremote: IRsendDemo - demonstrates sending IR codes with IRsend
- * An IR LED must be connected to Arduino PWM pin 3.
- * Version 0.1 July, 2009
- * Copyright 2009 Ken Shirriff
- * http://arcfn.com
- * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
- */
-#include <IRremote.h>
- 
-#define PanasonicAddress      0x4004     // Panasonic address (Pre data) 
-#define PanasonicPower        0x100BCBD  // Panasonic Power button
-
-#define JVCPower              0xC5E8
-
-IRsend irsend;
-
-void setup()
-{
-}
-
-void loop() {
-  irsend.sendPanasonic(PanasonicAddress,PanasonicPower); // This should turn your TV on and off
-  
-  irsend.sendJVC(JVCPower, 16,0); // hex value, 16 bits, no repeat
-  delayMicroseconds(50); // see http://www.sbprojects.com/knowledge/ir/jvc.php for information
-  irsend.sendJVC(JVCPower, 16,1); // hex value, 16 bits, repeat
-  delayMicroseconds(50);
-}