Diff: examples/LGACSendDemo/LGACSendDemo.ino

Revision:

2:6bbd1e911324

Parent:

1:370967a90abb

Child:

3:17440cf7ab90

--- a/examples/LGACSendDemo/LGACSendDemo.ino	Sat Jan 23 15:25:05 2016 +0900
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,263 +0,0 @@
-#include <IRremote.h>
-#include <Wire.h>
-
-
-IRsend irsend;
-// not used
-int RECV_PIN = 11;
-IRrecv irrecv (RECV_PIN);
-
-const int AC_TYPE  = 0;
-// 0 : TOWER
-// 1 : WALL
-//
-
-int AC_HEAT = 0;
-// 0 : cooling
-// 1 : heating
-
-int AC_POWER_ON    = 0;
-// 0 : off
-// 1 : on
-
-int AC_AIR_ACLEAN  = 0;
-// 0 : off
-// 1 : on --> power on
-
-int AC_TEMPERATURE = 27;
-// temperature : 18 ~ 30
-
-int AC_FLOW        = 1;
-// 0 : low
-// 1 : mid
-// 2 : high
-// if AC_TYPE =1, 3 : change
-//
-
-
-const int AC_FLOW_TOWER[3] = {0, 4, 6};
-const int AC_FLOW_WALL[4]  = {0, 2, 4, 5};
-
-unsigned long AC_CODE_TO_SEND;
-
-int r = LOW;
-int o_r = LOW;
-
-byte a, b;
-
-void ac_send_code(unsigned long code)
-{
-  Serial.print("code to send : ");
-  Serial.print(code, BIN);
-  Serial.print(" : ");
-  Serial.println(code, HEX);
-
-  irsend.sendLG(code, 28);
-}
-
-void ac_activate(int temperature, int air_flow)
-{
-
-  int AC_MSBITS1 = 8;
-  int AC_MSBITS2 = 8;
-  int AC_MSBITS3 = 0;
-  int AC_MSBITS4 ;
-  if ( AC_HEAT == 1 ) {
-    // heating
-    AC_MSBITS4 = 4;
-  } else {
-    // cooling
-    AC_MSBITS4 = 0;
-  }
-  int AC_MSBITS5 = temperature - 15;
-  int AC_MSBITS6 ;
-
-  if ( AC_TYPE == 0) {
-    AC_MSBITS6 = AC_FLOW_TOWER[air_flow];
-  } else {
-    AC_MSBITS6 = AC_FLOW_WALL[air_flow];
-  }
-
-  int AC_MSBITS7 = (AC_MSBITS3 + AC_MSBITS4 + AC_MSBITS5 + AC_MSBITS6) & B00001111;
-
-  AC_CODE_TO_SEND =  AC_MSBITS1 << 4 ;
-  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS2) << 4;
-  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS3) << 4;
-  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS4) << 4;
-  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS5) << 4;
-  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS6) << 4;
-  AC_CODE_TO_SEND =  (AC_CODE_TO_SEND + AC_MSBITS7);
-
-  ac_send_code(AC_CODE_TO_SEND);
-
-  AC_POWER_ON = 1;
-  AC_TEMPERATURE = temperature;
-  AC_FLOW = air_flow;
-}
-
-void ac_change_air_swing(int air_swing)
-{
-  if ( AC_TYPE == 0) {
-    if ( air_swing == 1) {
-      AC_CODE_TO_SEND = 0x881316B;
-    } else {
-      AC_CODE_TO_SEND = 0x881317C;
-    }
-  } else {
-    if ( air_swing == 1) {
-      AC_CODE_TO_SEND = 0x8813149;
-    } else {
-      AC_CODE_TO_SEND = 0x881315A;
-    }
-  }
-
-  ac_send_code(AC_CODE_TO_SEND);
-}
-
-void ac_power_down()
-{
-  AC_CODE_TO_SEND = 0x88C0051;
-
-  ac_send_code(AC_CODE_TO_SEND);
-
-  AC_POWER_ON = 0;
-}
-
-void ac_air_clean(int air_clean)
-{
-  if ( air_clean == 1) {
-    AC_CODE_TO_SEND = 0x88C000C;
-  } else {
-    AC_CODE_TO_SEND = 0x88C0084;
-  }
-
-  ac_send_code(AC_CODE_TO_SEND);
-
-  AC_AIR_ACLEAN = air_clean;
-}
-
-void setup()
-{
-  Serial.begin(38400);
-  delay(1000);
-  Wire.begin(7);
-  Wire.onReceive(receiveEvent);
-
-  Serial.println("  - - - T E S T - - -   ");
-
-  /* test
-    ac_activate(25, 1);
-    delay(5000);
-    ac_activate(27, 2);
-    delay(5000);
-
-  */
-}
-
-void loop()
-{
-
-
-  ac_activate(25, 1);
-  delay(5000);
-  ac_activate(27, 0);
-  delay(5000);
-
-
-  if ( r != o_r) {
-
-    /*
-    # a : mode or temp    b : air_flow, temp, swing, clean, cooling/heating
-    # 18 ~ 30 : temp      0 ~ 2 : flow // on
-    # 0 : off             0
-    # 1 : on              0
-    # 2 : air_swing       0 or 1
-    # 3 : air_clean       0 or 1
-    # 4 : air_flow        0 ~ 2 : flow
-    # 5 : temp            18 ~ 30
-    # + : temp + 1
-    # - : temp - 1
-    # m : change cooling to air clean, air clean to cooling
-    */
-    Serial.print("a : ");
-    Serial.print(a);
-    Serial.print("  b : ");
-    Serial.println(b);
-
-    switch (a) {
-      case 0: // off
-        ac_power_down();
-        break;
-      case 1: // on
-        ac_activate(AC_TEMPERATURE, AC_FLOW);
-        break;
-      case 2:
-        if ( b == 0 | b == 1 ) {
-          ac_change_air_swing(b);
-        }
-        break;
-      case 3: // 1  : clean on, power on
-        if ( b == 0 | b == 1 ) {
-          ac_air_clean(b);
-        }
-        break;
-      case 4:
-        if ( 0 <= b && b <= 2  ) {
-          ac_activate(AC_TEMPERATURE, b);
-        }
-        break;
-      case 5:
-        if (18 <= b && b <= 30  ) {
-          ac_activate(b, AC_FLOW);
-        }
-        break;
-      case '+':
-        if ( 18 <= AC_TEMPERATURE && AC_TEMPERATURE <= 29 ) {
-          ac_activate((AC_TEMPERATURE + 1), AC_FLOW);
-        }
-        break;
-      case '-':
-        if ( 19 <= AC_TEMPERATURE && AC_TEMPERATURE <= 30 ) {
-          ac_activate((AC_TEMPERATURE - 1), AC_FLOW);
-        }
-        break;
-      case 'm':
-        /*
-          if ac is on,  1) turn off, 2) turn on ac_air_clean(1)
-          if ac is off, 1) turn on,  2) turn off ac_air_clean(0)
-        */
-        if ( AC_POWER_ON == 1 ) {
-          ac_power_down();
-          delay(100);
-          ac_air_clean(1);
-        } else {
-          if ( AC_AIR_ACLEAN == 1) {
-            ac_air_clean(0);
-            delay(100);
-          }
-          ac_activate(AC_TEMPERATURE, AC_FLOW);
-        }
-        break;
-      default:
-        if ( 18 <= a && a <= 30 ) {
-          if ( 0 <= b && b <= 2 ) {
-            ac_activate(a, b);
-          }
-        }
-    }
-
-    o_r = r ;
-  }
-  delay(100);
-}
-
-
-
-void receiveEvent(int howMany)
-{
-  a = Wire.read();
-  b = Wire.read();
-  r = !r ;
-}
-
-