Diff: examples/IRrecvDump/IRrecvDump.ino

Revision:

2:6bbd1e911324

Parent:

1:370967a90abb

Child:

3:17440cf7ab90

--- a/examples/IRrecvDump/IRrecvDump.ino	Sat Jan 23 15:25:05 2016 +0900
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,95 +0,0 @@
-/*
- * IRremote: IRrecvDump - dump details of IR codes with IRrecv
- * An IR detector/demodulator must be connected to the input RECV_PIN.
- * Version 0.1 July, 2009
- * Copyright 2009 Ken Shirriff
- * http://arcfn.com
- * JVC and Panasonic protocol added by Kristian Lauszus (Thanks to zenwheel and other people at the original blog post)
- * LG added by Darryl Smith (based on the JVC protocol)
- */
-
-#include <IRremote.h>
-
-/* 
-*  Default is Arduino pin D11. 
-*  You can change this to another available Arduino Pin.
-*  Your IR receiver should be connected to the pin defined here
-*/
-int RECV_PIN = 11; 
-
-IRrecv irrecv(RECV_PIN);
-
-decode_results results;
-
-void setup()
-{
-  Serial.begin(9600);
-  irrecv.enableIRIn(); // Start the receiver
-}
-
-
-void dump(decode_results *results) {
-  // Dumps out the decode_results structure.
-  // Call this after IRrecv::decode()
-  int count = results->rawlen;
-  if (results->decode_type == UNKNOWN) {
-    Serial.print("Unknown encoding: ");
-  }
-  else if (results->decode_type == NEC) {
-    Serial.print("Decoded NEC: ");
-
-  }
-  else if (results->decode_type == SONY) {
-    Serial.print("Decoded SONY: ");
-  }
-  else if (results->decode_type == RC5) {
-    Serial.print("Decoded RC5: ");
-  }
-  else if (results->decode_type == RC6) {
-    Serial.print("Decoded RC6: ");
-  }
-  else if (results->decode_type == PANASONIC) {
-    Serial.print("Decoded PANASONIC - Address: ");
-    Serial.print(results->address, HEX);
-    Serial.print(" Value: ");
-  }
-  else if (results->decode_type == LG) {
-    Serial.print("Decoded LG: ");
-  }
-  else if (results->decode_type == JVC) {
-    Serial.print("Decoded JVC: ");
-  }
-  else if (results->decode_type == AIWA_RC_T501) {
-    Serial.print("Decoded AIWA RC T501: ");
-  }
-  else if (results->decode_type == WHYNTER) {
-    Serial.print("Decoded Whynter: ");
-  }
-  Serial.print(results->value, HEX);
-  Serial.print(" (");
-  Serial.print(results->bits, DEC);
-  Serial.println(" bits)");
-  Serial.print("Raw (");
-  Serial.print(count, DEC);
-  Serial.print("): ");
-
-  for (int i = 1; i < count; i++) {
-    if (i & 1) {
-      Serial.print(results->rawbuf[i]*USECPERTICK, DEC);
-    }
-    else {
-      Serial.write('-');
-      Serial.print((unsigned long) results->rawbuf[i]*USECPERTICK, DEC);
-    }
-    Serial.print(" ");
-  }
-  Serial.println();
-}
-
-void loop() {
-  if (irrecv.decode(&results)) {
-    Serial.println(results.value, HEX);
-    dump(&results);
-    irrecv.resume(); // Receive the next value
-  }
-}