initial

Dependencies:   mbed

Revision:
1:9d3b497333c0
Parent:
0:638edba3adf6
diff -r 638edba3adf6 -r 9d3b497333c0 mbed-src/common/board.c
--- a/mbed-src/common/board.c	Mon Jan 11 02:32:24 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,59 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "gpio_api.h"
-#include "wait_api.h"
-#include "toolchain.h"
-#include "mbed_interface.h"
-
-WEAK void mbed_die(void) {
-#if !defined (NRF51_H) && !defined(TARGET_EFM32)
-	__disable_irq();	// dont allow interrupts to disturb the flash pattern
-#endif
-#if   (DEVICE_ERROR_RED == 1)
-    gpio_t led_red; gpio_init_out(&led_red, LED_RED);
-#elif (DEVICE_ERROR_PATTERN == 1)
-    gpio_t led_1; gpio_init_out(&led_1, LED1);
-    gpio_t led_2; gpio_init_out(&led_2, LED2);
-    gpio_t led_3; gpio_init_out(&led_3, LED3);
-    gpio_t led_4; gpio_init_out(&led_4, LED4);
-#endif
-
-    while (1) {
-#if   (DEVICE_ERROR_RED == 1)
-        gpio_write(&led_red, 1);
-
-#elif (DEVICE_ERROR_PATTERN == 1)
-        gpio_write(&led_1, 1);
-        gpio_write(&led_2, 0);
-        gpio_write(&led_3, 0);
-        gpio_write(&led_4, 1);
-#endif
-
-        wait_ms(150);
-
-#if   (DEVICE_ERROR_RED == 1)
-        gpio_write(&led_red, 0);
-
-#elif (DEVICE_ERROR_PATTERN == 1)
-        gpio_write(&led_1, 0);
-        gpio_write(&led_2, 1);
-        gpio_write(&led_3, 1);
-        gpio_write(&led_4, 0);
-#endif
-
-        wait_ms(150);
-    }
-}