![](/media/cache/profiles/312e53ccba0b2ddfefd4a1f05b55bcdd.jpg.50x50_q85.jpg)
BLE FOTA APP
It doesn't work with the default FOTA bootloader. It use NVIC_SystemReset() to enter a bootloader.
nRF51822/nordic/nrf-sdk/s110/ble_hci.h
- Committer:
- yihui
- Date:
- 2014-10-10
- Revision:
- 1:a607cd9655d7
File content as of revision 1:a607cd9655d7:
/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved. The information contained herein is confidential property of Nordic Semiconductor. The use, copying, transfer or disclosure of such information is prohibited except by express written agreement with Nordic Semiconductor. */ /** @addtogroup BLE_COMMON @{ */ #ifndef BLE_HCI_H__ #define BLE_HCI_H__ /** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes * @{ */ #define BLE_HCI_STATUS_CODE_SUCCESS 0x00 #define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 #define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /*0x03 Hardware Failure 0x04 Page Timeout */ #define BLE_HCI_AUTHENTICATION_FAILURE 0x05 #define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 #define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 #define BLE_HCI_CONNECTION_TIMEOUT 0x08 /*0x09 Connection Limit Exceeded 0x0A Synchronous Connection Limit To A Device Exceeded 0x0B ACL Connection Already Exists*/ #define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /*0x0D Connection Rejected due to Limited Resources 0x0E Connection Rejected Due To Security Reasons 0x0F Connection Rejected due to Unacceptable BD_ADDR 0x10 Connection Accept Timeout Exceeded 0x11 Unsupported Feature or Parameter Value*/ #define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 #define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 #define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 #define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 #define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /* 0x17 Repeated Attempts 0x18 Pairing Not Allowed 0x19 Unknown LMP PDU */ #define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /* 0x1B SCO Offset Rejected 0x1C SCO Interval Rejected 0x1D SCO Air Mode Rejected*/ #define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E #define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /*0x20 Unsupported LMP Parameter Value 0x21 Role Change Not Allowed */ #define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /*0x23 LMP Error Transaction Collision*/ #define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /*0x25 Encryption Mode Not Acceptable 0x26 Link Key Can Not be Changed 0x27 Requested QoS Not Supported */ #define BLE_HCI_INSTANT_PASSED 0x28 #define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 #define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /* 0x2B Reserved 0x2C QoS Unacceptable Parameter 0x2D QoS Rejected 0x2E Channel Classification Not Supported 0x2F Insufficient Security 0x30 Parameter Out Of Mandatory Range 0x31 Reserved 0x32 Role Switch Pending 0x33 Reserved 0x34 Reserved Slot Violation 0x35 Role Switch Failed 0x36 Extended Inquiry Response Too Large 0x37 Secure Simple Pairing Not Supported By Host. 0x38 Host Busy - Pairing 0x39 Connection Rejected due to No Suitable Channel Found*/ #define BLE_HCI_CONTROLLER_BUSY 0x3A #define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B #define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C #define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D #define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /** @} */ #endif // BLE_HCI_H__ /** @} */