![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
ECE4180 Final Project
Dependencies: 4DGL-uLCD-SE DS1820 PinDetect Speaker mbed
Fork of SousVide by
main.cpp
- Committer:
- Mcplokqaws
- Date:
- 2016-12-04
- Revision:
- 1:2d86c674a78b
- Parent:
- 0:03ec282c2908
File content as of revision 1:2d86c674a78b:
#include "mbed.h" #include "uLCD_4DGL.h" #include "Speaker.h" #include "DS1820.h" #include "PinDetect.h" #include <time.h> //Program by: Tianhang Ren, Minsuk Chun, Richard Lee //////////////////////////////////////////////////////// //Initialize /////////////////////////////////////////////////////// DS1820 probe(p5); PinDetect pbUp(p18); // Buttons to raise/lower/enter temperature PinDetect pbDown(p19); PinDetect pbEnter (p20); Serial pc(USBTX, USBRX); // serial comms over usb back to console //Timer T; DigitalOut myled1(LED1); // On when relay is engaged DigitalOut myled2(LED2); DigitalOut myled3(LED3); DigitalOut myled4(LED4); uLCD_4DGL uLCD(p28, p27, p29); // create a global uLCD object DigitalOut ctrl(p8); //relay control // setup instance of new Speaker class, mySpeaker using pin 21 // the pin must be a PWM output pin Speaker mySpeaker(p26); float userTemp = 0; //user desired temperature of device int check = 0; //indicates whether enter key is pressed float timeCook = 0; //////////////////////////////////////////////////////// // Initialize pushbuttons /////////////////////////////////////////////////////// // Callback routine is interrupt activated by a debounced pb1 hit void pbUp_hit_callback (void) { // CODE HERE WILL RUN WHEN INTERUPT IS GENERATED myled1 = !myled1; mySpeaker.PlayNote(200.0,0.25,0.1); userTemp++; timeCook +=5; //TODO CHANGE TIME BACK TO 10 INTERVALS } // Callback routine is interrupt activated by a debounced pb2 hit void pbDown_hit_callback (void) { // CODE HERE WILL RUN WHEN INTERUPT IS GENERATED myled2 = !myled2; mySpeaker.PlayNote(400.0,0.25,0.1); userTemp--; if (userTemp <=0) { userTemp = 0; } timeCook-=5; if (timeCook <=0) timeCook=0; } // Callback routine is interrupt activated by a debounced pb3 hit void pbEnter_hit_callback (void) { // CODE HERE WILL RUN WHEN INTERUPT IS GENERATED myled3 = !myled3; mySpeaker.PlayNote(800.0,0.10,0.1); mySpeaker.PlayNote(1000.0,0.10,0.1); mySpeaker.PlayNote(1200.0,0.10,0.1); check++; } //////////////////////////////////////////////////////// // Main method starts here //////////////////////////////////////////////////////// int main() { //setup three SPST push buttons pbUp.mode(PullUp); //add internal pullup resistor pbDown.mode(PullUp); pbEnter.mode(PullUp); // Delay for initial pullup to take effect wait(.01); // Setup Interrupt callback functions for a pb hit pbUp.attach_deasserted(&pbUp_hit_callback); pbDown.attach_deasserted(&pbDown_hit_callback); pbEnter.attach_deasserted(&pbEnter_hit_callback); // Start sampling pb inputs using interrupts pbUp.setSampleFrequency(); pbDown.setSampleFrequency(); pbEnter.setSampleFrequency(); // pushbuttons now setup and running //////////////////////////////////////////////////////// // Ask for temperature and time desired //////////////////////////////////////////////////////// uLCD.printf("Enter desired temperature"); //Ask for desired temperature while(check ==0) { //if check flag is 0, means enter has not been pushed if (pbUp) { uLCD.locate(0,3); uLCD.printf("%4.0f", userTemp); } if (pbDown) { uLCD.locate(0,3); uLCD.printf("%4.0f", userTemp); } } float finalTemp = userTemp; //reassign to final temp check = 0; uLCD.cls(); uLCD.locate(0,0); timeCook = 0; //reset timeCook uLCD.printf("Enter cooking time"); //Cooking time in minutes while (check == 0) { if (pbUp) { uLCD.locate(0,3); uLCD.printf("%4.0f", timeCook); } if (pbDown) { uLCD.locate(0,3); uLCD.printf("%4.0f", timeCook); } } float finalTime = timeCook *60; //reassign to final time ctrl = 1; // Turn on relay float tempLimit = 0; //intitialize variable to track temperature uLCD.locate(0,0); uLCD.printf("Set Temp (C)", finalTemp); //print set temperature while (tempLimit < (finalTemp + 1)) { //Loop while temperature is 1 degrees over destination probe.convertTemperature(true, DS1820::all_devices); //Start temperature conversion, wait until ready tempLimit = probe.temperature(); uLCD.locate(0,3); uLCD.printf("It is %3.1foC\r", probe.temperature()); wait(1); } //////////////////////////////////////////////////////// // Start cooking with finalized temperatures and time //////////////////////////////////////////////////////// //PLAY SOUND FROM SPEAKER /* T.start(); //Timer start (s)*/ float time_remaining = 1; ctrl = 0; uLCD.cls(); uLCD.locate(0,0); uLCD.printf("Set Temperature %4.0foC\r", finalTemp); set_time(1256729737); // Set RTC time to Wed, 28 Oct 2009 11:35:37 // time_t seconds = time(NULL); while(time_remaining > 0) { //Loop while timer has not reached desired time if (tempLimit < (finalTemp - 1)) { //If temperature is 2 degrees C lower than desired, turn relay on ctrl = 1; } else if (tempLimit >= finalTemp) { ctrl = 0; } tempLimit = probe.temperature(); probe.convertTemperature(true, DS1820::all_devices); //Start temperature conversion, wait until ready uLCD.locate(0,3); uLCD.printf("It is %3.1foC\r", probe.temperature()); uLCD.locate(0,5); time_t seconds = time(NULL); //Cycle RTC time_remaining = finalTime - (seconds - 1256729737); if ((time_remaining/3600) >= 1 ) uLCD.printf("Time remaining: \n%4.0f hours", time_remaining/3600); else if ((time_remaining/60) >= 1) uLCD.printf("Time remaining: %4.0f minutes", time_remaining/60); else uLCD.printf("Time remaining: %4.0f seconds", time_remaining); } ctrl = 0; //PLAY SOUND FROM SPEAKER mySpeaker.PlayNote(1567.98,0.25,0.1); mySpeaker.PlayNote(1046.50,0.25,0.1); mySpeaker.PlayNote(1174.66,0.25,0.1); mySpeaker.PlayNote(1318.51,0.25,0.1); mySpeaker.PlayNote(1396.91,0.25,0.1); mySpeaker.PlayNote(1567.98,0.25,0.1); mySpeaker.PlayNote(1046.50,0.25,0.1); mySpeaker.PlayNote(1046.50,0.25,0.1); mySpeaker.PlayNote(1760.00,0.25,0.1); mySpeaker.PlayNote(1396.91,0.25,0.1); mySpeaker.PlayNote(1567.98,0.25,0.1); mySpeaker.PlayNote(1760.00,0.25,0.1); mySpeaker.PlayNote(1975.53,0.25,0.1); mySpeaker.PlayNote(2093.00,0.25,0.1); mySpeaker.PlayNote(1046.50,0.25,0.1); mySpeaker.PlayNote(1046.50,0.25,0.1); uLCD.cls(); uLCD.locate(0,0); uLCD.printf("Food is ready"); }