Works with 8g
Fork of MMA8452 by
MMA8452.h
- Committer:
- nherriot
- Date:
- 2013-10-08
- Revision:
- 1:ef026bf28798
- Parent:
- 0:bcf2aa85d7f9
- Child:
- 2:66db0f91b215
File content as of revision 1:ef026bf28798:
// Author: Nicholas Herriot /* Copyright (c) 2013 Vodafone, MIT License * * Permission is hereby granted, free of charge, to any person obtaining a copy of this software * and associated documentation files (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, publish, distribute, * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all copies or * substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ // the SparkFun breakout board defaults to 1, set to 0 if SA0 jumper on the bottom of the board is set // see the Table 10. I2C Device Address Sequence in Freescale MMA8452Q pdf //#define SA0 1 //#if SA0 //#define MMA8452_ADDRESS 0x3A // SA0 is high, 0x1C if low - it should be 0x1D, but we shift now to save shifting in the code //#else //#define MMA8452_ADDRESS 0x1C //#endif //#ifndef MBED_MMA8452 //#define MBED_MMA8452 #include "mbed.h" /** Accelerometer MMA8452 class * * Example: * @code * * #include "mbed.h" * #include "MMA8452.h" * * * Accelerometer_MMA8452 Acc(p28, p27); * serial pc(USBTX, USBRX); * * int main() * { * Acc.init(); * while(1) * { * int x=0, y=0, z=0; * Acc.read_Tilt(&x, &y, &z); * pc.printf("Tilt x: %2.2f degree \n", x); // Print the tilt orientation of the X axis * pc.printf("Tilt y: %2.2f degree \n", y); // Print the tilt orientation of the Y axis * pc.printf("Tilt z: %2.2f degree \n", z); // Print the tilt orientation of the Z axis * wait(1); * } * } * @endcode */ // More info on MCU Master address can be found on section 5.10.1 of http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MMA8452Q #define SA0 1 #if SA0 #define MMA8452_ADDRESS 0x1D // SA0 is high, 0x1C if low - #else #define MMA8452_ADDRESS 0x1C #endif // Register descriptions found in section 6 of pdf #define STATUS 0x00 // Type 'read' : Real time status, should return 0x00 #define OUT_X_MSB 0x01 // Type 'read' : x axis - 8 most significatn bit of a 12 bit sample #define OUT_X_LSB 0x02 // Type 'read' : x axis - 4 least significatn bit of a 12 bit sample #define OUT_Y_MSB 0x03 // Type 'read' : y axis - 8 most significatn bit of a 12 bit sample #define OUT_Y_LSB 0x04 // Type 'read' : y axis - 4 least significatn bit of a 12 bit sample #define OUT_Z_MSB 0x05 // Type 'read' : z axis - 8 most significatn bit of a 12 bit sample #define OUT_Z_LSB 0x06 // Type 'read' : z axis - 4 least significatn bit of a 12 bit sample #define SYSMOD 0x0B // Type 'read' : This tells you if device is active, sleep or standy 0x00=STANDBY 0x01=WAKE 0x02=SLEEP #define WHO_AM_I 0x0D // Type 'read' : This should return the device id of 0x2A #define PL_STATUS 0x10 // Type 'read' : This shows portrait landscape mode orientation #define PL_CFG 0x11 // Type 'read/write' : This allows portrait landscape configuration #define PL_COUNT 0x12 // Type 'read' : This is the portraint landscape debounce counter #define PL_BF_ZCOMP 0x13 // Type 'read' : #define PL_THS_REG 0x14 // Type 'read' : #define FF_MT_CFG 0X15 // Type 'read/write' : Freefaul motion functional block configuration #define FF_MT_SRC 0X16 // Type 'read' : Freefaul motion event source register #define FF_MT_THS 0X17 // Type 'read' : Freefaul motion threshold register #define FF_COUNT 0X18 // Type 'read' : Freefaul motion debouce counter #define ASLP_COUNT 0x29 // Type 'read/write' : Counter setting for auto sleep #define CTRL_REG_1 0x2A // Type 'read/write' : #define CTRL_REG_2 0x2B // Type 'read/write' : #define CTRL_REG_3 0x2C // Type 'read/write' : #define CTRL_REG_4 0x2D // Type 'read/write' : #define CTRL_REG_5 0x2E // Type 'read/write' : #define TILT_STATUS 0x03 // Tilt Status (Read only) #define SRST_STATUS 0x04 // Sample Rate Status Register (Read only) #define SPCNT_STATUS 0x05 // Sleep Count Register (Read/Write) #define INTSU_STATUS 0x06 // Interrupt Setup Register #define MODE_STATUS 0x07 // Mode Register (Read/Write) #define SR_STATUS 0x08 // Auto-Wake and Active Mode Portrait/Landscape Samples per Seconds Register (Read/Write) #define PDET_STATUS 0x09 // Tap/Pulse Detection Register (Read/Write) #define PD_STATUS 0xA // Tap/Pulse Debounce Count Register (Read/Write) class Accelerometer_MMA8452 { public: /** Create an accelerometer object connected to the specified I2C object * * @param sda I2C data port * @param scl I2C8452 clock port * */ Accelerometer_MMA8452(PinName sda, PinName scl, int frequency); //Accelerometer_MMA8452(PinName sda, PinName scl); /** Destroys an MMA8452 object * */ ~Accelerometer_MMA8452(); /** Activate the MMA8452 (required) * returns 0 for success in activating the chip * returns 1 for failure in activating the chip * -currrently no retries or waiting is done, this method tries 1 time the exits. */ int activate(); /** Initialization of device MMA8452 (required) */ void init(); /** Read the device ID from the accelerometer * * @param *deviceID Value of device - is should be 0x2A * return 0 for success or * return 1 for failure. */ int Get_DeviceID(int *deviceID); /** Read the Tilt Angle using Three Axis * * @param *x Value of x tilt * @param *y Value of y tilt * @param *z Value of z tilt */ void read_Tilt(float *x, float *y, float *z); /** Read the x register of the MMA8452 * * @returns The value of x acceleration */ int read_x(); /** Read the y register of the MMA8452 * * @returns The value of y acceleration */ int read_y(); /** Read the z register of the MMA8452 * * @returns The value of z acceleration */ int read_z(); /** Read the x,y and z registers of the MMA8452 * * takes a 2 byte char buffer to store the value * for each axis. * returns 0 for success, and 1 for failure * */ int read_xyz(char *x, char *y, char *z); /** Read from specified MMA8452 register * * @param addr The internal registeraddress of the MMA8452 * @returns The value of the register */ char read_reg(char addr); /** Write to specified MMA8452 register * * @param addr The internal registeraddress of the MMA8452 * @param data New value of the register */ void write_reg(char addr, char data); private: I2C m_i2c; int m_frequency; }; //#endif