Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/PeripheralPins.c

Revision:

0:f269e3021894

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/PeripheralPins.c	Sun Oct 23 15:10:02 2016 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*todo: determine how function argument is used */
+
+#include "PeripheralPins.h"
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+    {A0,  ADC_0, 0},
+    {A1,  ADC_0, 0},
+    {A2,  ADC_0, 0},
+    {A3,  ADC_0, 0},
+    {NC   , NC       , 0}
+};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+    {GPIO3,  I2C_0, 5},
+    {GPIO4,  I2C_0, 5},
+    {GPIO10, I2C_0, 5},
+    {GPIO12, I2C_0, 5},
+    {GPIO15, I2C_1, 5},
+    {GPIO16, I2C_1, 5},
+    {NC   , NC   , 0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {GPIO2,  I2C_0, 5},
+    {GPIO5,  I2C_0, 5},
+    {GPIO11, I2C_0, 5},
+    {GPIO13, I2C_0, 5},
+    {GPIO14, I2C_1, 5},
+    {GPIO17, I2C_1, 5},
+    {NC   , NC   , 0}
+};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+    {GPIO0, UART_0, 7},
+    {GPIO8, UART_1, 7},
+    {NC  ,  NC    , 0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {GPIO1, UART_0, 7},
+    {GPIO9, UART_1, 7},
+    {NC  ,  NC    , 0}
+};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+    /*todo: other pins are possible, need to add */
+    {SPI1_SCLK_2, SPI_0, 6},
+    {SPI1_SCLK_3, SPI_0, 6},
+    {SPI2_SCLK,   SPI_1, 6},
+    {NC,          NC,    0}
+};
+
+const PinMap PinMap_SPI_MOSI[] = {
+    /*todo: other pins are possible, need to add */
+    {SPI1_SDATAO_2, SPI_0, 6},
+    {SPI1_SDATAO_3, SPI_0, 6},
+    {SPI2_SDATAO,   SPI_1, 6},
+    {NC,            NC,    0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    /*todo: other pins are possible, need to add */
+    {SPI1_SDATAI_2, SPI_0, 6},
+    {SPI1_SDATAI_3, SPI_0, 6},
+    {SPI2_SDATAI,   SPI_1, 6},
+    {NC,            NC,    0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    /*todo: other pins are possible, need to add */
+    /* TODO what about SSNO */
+    {SPI1_SSNO0_1, SPI_0, 6},
+    {SPI1_SSNO1_1, SPI_0, 6},
+    {SPI1_SSNO2_1, SPI_0, 6},
+    {SPI1_SSNO3_1, SPI_0, 6},
+    {SPI1_SSNI_2,  SPI_0, 6},
+    {SPI1_SSNO0_2, SPI_0, 6},
+    {SPI1_SSNO1_2, SPI_0, 6},
+    {SPI1_SSNO2_2, SPI_0, 6},
+    {SPI2_SSNI,    SPI_1, 6},
+    {SPI2_SSNO0,   SPI_1, 6},
+    {NC,           NC,    0}
+};
+
+
+const PinMap PinMap_PWM[] = {
+
+    {GPIO6 , PWM_0 , 4},
+    {GPIO7 , PWM_0 , 4},
+    {GPIO9 , PWM_0 , 4},
+    {GPIO12 , PWM_0 , 4},
+    {GPIO13 , PWM_0 , 4},
+    {NC   , NC    , 0}
+};