File content as of revision 1:da09e6a94937:

// TCP Echo server
// 2010/9/7


/*

(Execute Sample)
PC side:
telnet 192.168.0.25 12345
Trying 192.168.0.25...
Connected to 192.168.0.25.
Escape character is '^]'.

mbed side:
Setup OK
mbed IP Address is 192.168.0.25
Binding..
Listening...
Listening: TCP Socket Accepted
Listening: Incoming TCP connection from 192.168.0.7
TCP Socket Readable
Received&Wrote:test text

TCP Socket Writable


*/

#include "mbed.h"
#include "EthernetNetIf.h"
#include "TCPSocket.h"

DigitalOut led4(LED4, "led4");

// EthernetNetIf eth;
EthernetNetIf eth(
  IpAddr(192,168,0,25), //IP Address
  IpAddr(255,255,255,0), //Network Mask
  IpAddr(192,168,0,1), //Gateway
  IpAddr(192,168,0,1)  //DNS
);

#define TCP_LISTENING_PORT 12345

TCPSocket ListeningSock;
TCPSocket* pConnectedSock; // for ConnectedSock
Host client;
TCPSocketErr err;

void onConnectedTCPSocketEvent(TCPSocketEvent e)
{
   switch(e)
    {
    case TCPSOCKET_CONNECTED:
        printf("TCP Socket Connected\r\n");
        break;
    case TCPSOCKET_WRITEABLE:
      //Can now write some data...
        printf("TCP Socket Writable\r\n");
        break;
    case TCPSOCKET_READABLE:
      //Can now read dome data...
        printf("TCP Socket Readable\r\n");
       // Read in any available data into the buffer
       char buff[128];
       while ( int len = pConnectedSock->recv(buff, 128) ) {
       // And send straight back out again
           pConnectedSock->send(buff, len);
           buff[len]=0; // make terminater
           printf("Received&Wrote:%s\r\n",buff);
       }
       break;
    case TCPSOCKET_CONTIMEOUT:
        printf("TCP Socket Timeout\r\n");
        break;
    case TCPSOCKET_CONRST:
        printf("TCP Socket CONRST\r\n");
        break;
    case TCPSOCKET_CONABRT:
        printf("TCP Socket CONABRT\r\n");
        break;
    case TCPSOCKET_ERROR:
        printf("TCP Socket Error\r\n");
        break;
    case TCPSOCKET_DISCONNECTED:
    //Close socket...
        printf("TCP Socket Disconnected\r\n");        
        pConnectedSock->close();
        break;
    default:
        printf("DEFAULT\r\n"); 
      }
}


void onListeningTCPSocketEvent(TCPSocketEvent e)
{
    switch(e)
    {
    case TCPSOCKET_ACCEPT:
        printf("Listening: TCP Socket Accepted\r\n");
        // Accepts connection from client and gets connected socket.   
        err=ListeningSock.accept(&client, &pConnectedSock);
        if (err) {
            printf("onListeningTcpSocketEvent : Could not accept connection.\r\n");
            return; //Error in accept, discard connection
        }
        // Setup the new socket events
        pConnectedSock->setOnEvent(&onConnectedTCPSocketEvent);
        // We can find out from where the connection is coming by looking at the
        // Host parameter of the accept() method
        IpAddr clientIp = client.getIp();
        printf("Listening: Incoming TCP connection from %d.%d.%d.%d\r\n", 
           clientIp[0], clientIp[1], clientIp[2], clientIp[3]);
       break;
    // the following cases will not happen
    case TCPSOCKET_CONNECTED:
        printf("Listening: TCP Socket Connected\r\n");
        break;
    case TCPSOCKET_WRITEABLE:
        printf("Listening: TCP Socket Writable\r\n");
        break;
    case TCPSOCKET_READABLE:
        printf("Listening: TCP Socket Readable\r\n");
        break;
    case TCPSOCKET_CONTIMEOUT:
        printf("Listening: TCP Socket Timeout\r\n");
        break;
    case TCPSOCKET_CONRST:
        printf("Listening: TCP Socket CONRST\r\n");
        break;
    case TCPSOCKET_CONABRT:
        printf("Listening: TCP Socket CONABRT\r\n");
        break;
    case TCPSOCKET_ERROR:
        printf("Listening: TCP Socket Error\r\n");
        break;
    case TCPSOCKET_DISCONNECTED:
    //Close socket...
        printf("Listening: TCP Socket Disconnected\r\n");        
        ListeningSock.close();
        break;
    default:
        printf("DEFAULT\r\n"); 
     };
}


int main() {
  printf("\r\n");
  printf("Setting up...\r\n");
  EthernetErr ethErr = eth.setup();
  if(ethErr)
  {
    printf("Error %d in setup.\r\n", ethErr);
    return -1;
  }
  printf("Setup OK\r\n");

  IpAddr ip = eth.getIp();
  printf("mbed IP Address is %d.%d.%d.%d\r\n", ip[0], ip[1], ip[2], ip[3]);

  
  // Set the callbacks for Listening
  ListeningSock.setOnEvent(&onListeningTCPSocketEvent); 
  
  // bind and listen on TCP
  err=ListeningSock.bind(Host(IpAddr(), TCP_LISTENING_PORT));
  printf("Binding..\r\n");
  if(err)
  {
   //Deal with that error...
    printf("Binding Error\n");
  }
   err=ListeningSock.listen(); // Starts listening
   printf("Listening...\r\n");
   if(err)
   {
    printf("Listening Error\r\n");
   }
 
  Timer tmr;
  tmr.start();

  while(true)
  {
    Net::poll();
    if(tmr.read() > 0.2) // sec
    {
      led4=!led4; //Show that we are alive
      tmr.reset();
    }
  }  
}