![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Sparkfun CC3000 WiFi Shield meets mbed. Supports the following boards: (1)FRDM-KL25Z (KL25Z) (2)ST Nucleo F401RE (STM32F401) (3)ST Nucleo F030R8 (STM32F030) (4)LPCXpresso1549 (LPC1549) (5)Seeduino-Arch-Pro (ARCH_PRO)
Dependencies: cc3000_hostdriver_mbedsocket mbed
Fork of cc3000_hello_world_demo by
Diff: main.cpp
- Revision:
- 4:2304a105c87f
- Parent:
- 1:c3a27e2adf93
- Child:
- 7:e450e59b0cf8
diff -r 9fb9fa2cec61 -r 2304a105c87f main.cpp --- a/main.cpp Wed Oct 09 19:46:33 2013 +0000 +++ b/main.cpp Wed Nov 06 17:03:29 2013 +0000 @@ -19,101 +19,38 @@ using namespace mbed_cc3000; -tUserFS user_info; - /* cc3000 module declaration specific for user's board. Check also init() */ #if (MY_BOARD == WIGO) -cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), PORTA_IRQn); +cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), "ssid", "key", WPA2, false); Serial pc(USBTX, USBRX); #elif (MY_BOARD == WIFI_DIPCORTEX) -cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), PIN_INT0_IRQn); +cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), "ssid", "key", WPA2, false); Serial pc(UART_TX, UART_RX); +#elif (MY_BOARD == MBED_BOARD_EXAMPLE) +cc3000 wifi(p9, p10, p8, SPI(p5, p6, p7), "ssid", "key", WPA2, false); +Serial pc(USBTX, USBRX); #else #endif /** - * \brief Print cc3000 information + * \brief Hello World * \param none - * \return none - */ -void print_cc3000_info() { - uint8_t myMAC[8]; - - printf("MAC address + cc3000 info \r\n"); - wifi.get_user_file_info((uint8_t *)&user_info, sizeof(user_info)); - wifi.get_mac_address(myMAC); - printf(" MAC address %02x:%02x:%02x:%02x:%02x:%02x \r\n \r\n", myMAC[0], myMAC[1], myMAC[2], myMAC[3], myMAC[4], myMAC[5]); - - printf(" FTC %i \r\n",user_info.FTC); - printf(" PP_version %i.%i \r\n",user_info.PP_version[0], user_info.PP_version[1]); - printf(" SERV_PACK %i.%i \r\n",user_info.SERV_PACK[0], user_info.SERV_PACK[1]); - printf(" DRV_VER %i.%i.%i \r\n",user_info.DRV_VER[0], user_info.DRV_VER[1], user_info.DRV_VER[2]); - printf(" FW_VER %i.%i.%i \r\n",user_info.FW_VER[0], user_info.FW_VER[1], user_info.FW_VER[2]); -} - -/** - * \brief Connect to SSID with a timeout - * \param ssid Name of SSID - * \param key Password - * \param sec_mode Security mode - * \return none - */ -void connect_to_ssid(char *ssid, char *key, unsigned char sec_mode) { - printf("Connecting to SSID: %s. Timeout is 10s. \r\n",ssid); - if (wifi.connect_to_AP((uint8_t *)ssid, (uint8_t *)key, sec_mode) == true) { - printf(" Connected. \r\n"); - } else { - printf(" Connection timed-out (error). Please restart. \r\n"); - while(1); - } -} - -/** - * \brief Connect to SSID without security - * \param ssid Name of SSID - * \return none - */ -void connect_to_ssid(char *ssid) { - wifi.connect_open((uint8_t *)ssid); -} - - -/** - * \brief Hello World - * \param none * \return int */ int main() { init(); /* board dependent init */ pc.baud(115200); - wifi.start(0); printf("cc3000 Hello World demo. \r\n"); - print_cc3000_info(); - - printf("Attempting SSID Connection. \r\n"); - wifi._wlan.ioctl_set_connection_policy(0, 0, 0); -#ifndef CC3000_TINY_DRIVER -#ifdef AP_KEY - connect_to_ssid(SSID, AP_KEY, AP_SECURITY); -#else - connect_to_ssid(SSID); -#endif -#else - connect_to_ssid(SSID); -#endif - printf("DHCP request \r\n"); - while (wifi.is_dhcp_configured() == false) { - wait_ms(500); - printf(" Waiting for dhcp to be set. \r\n"); + wifi.init(); + if (wifi.connect() == -1) { + printf("Failed to connect. Please verify connection details and try again. \r\n"); + } else { + printf("IP address: %s \r\n",wifi.getIPAddress()); + printf("\r\ncc3000 connected to the Internet. Demo completed. \r\n"); } - tNetappIpconfigRetArgs ipinfo2; - wifi.get_ip_config(&ipinfo2); // data is returned in the ipinfo2 structure - printf("DHCP assigned IP Address = %d.%d.%d.%d \r\n", ipinfo2.aucIP[3], ipinfo2.aucIP[2], ipinfo2.aucIP[1], ipinfo2.aucIP[0]); - printf("\r\ncc3000 connected to the Internet. Demo completed. \r\n\r\n"); - wifi.disconnect(); }