Diff: mainwmx.cpp

Revision:

9:a3f9faa9ca1f

Parent:

8:e76bebe9c45f

Child:

10:acc53f50c9df

--- a/mainwmx.cpp	Fri Jul 27 10:19:40 2018 +0000
+++ b/mainwmx.cpp	Tue Jul 31 03:56:05 2018 +0000
@@ -13,14 +13,16 @@
 #include <stdlib.h>
 #include "SDFileSystem.h"
 #include "networking.h"
+//#include <string>
+
 
 
-#define edgex1 30         //          上x(正朝向开关)下y(负朝向开关)
-#define edgex2 125        //              __
-#define edgey1 90         //              ||
-#define edgey2 150        //              115mm y2
-#define widthx 95        //         x2   ||         x1
-#define widthy 60        //      //=====190mm====//30mm/|开关
+#define edgex1 125         //          上x(正朝向开关)下y(负朝向开关)
+#define edgex2 155        //              __
+#define edgey1 70         //              ||
+#define edgey2 100        //              125mm y2
+#define widthx 30        //         x2   ||         x1
+#define widthy 30        //      //=====210mm====//35mm/|开关
 #define mm 100//100步1mm  //              ||
                           //              ||
                           //              ||
@@ -62,7 +64,7 @@
 
 //与实际有关参数
 float Lenoflattice = 1 ;//mm  取1mm为xy单元  unit_xy/Lenoflattice=100
-int unit_xy = 200;  //单位长度(xy移动一格)对应unit_xy转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
+int unit_xy = 100;  //单位长度(xy移动一格)对应unit_xy转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
 int unit_x = 103;  //单位长度(xy移动一格)对应unit_x转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
 int unit_y = 103;  //单位长度(xy移动一格)对应unit_y转   大约10cm/3圈/9600step 约96mm/9600step=0.1mm/10step
 ///Ticker ticker_step;
@@ -77,12 +79,14 @@
 double y=0;//图片y边长
 double x=0;//图片x边长
 int key=0;//判断变量
+int dot=0;//点计数
+int flag=0;
+//char w[4294967295];
 
 void rotate(int id ,int pix);
 
 
 
-
 void biginning()
 {
     pc.printf("x\n");           //          上x(正朝向开关)下y(负朝向开关)
@@ -97,7 +101,14 @@
     rotate(1,-5);               //              __      y1
     }                           //
      rotate(1,mm*edgey1);      //              __ 开关   15mm
-     
+     //定位
+    for (int i = 0; i < 500; i++) 
+    {
+        switch_GS = 1;
+        wait(0.005);
+        switch_GS = 0;
+        wait(0.005);
+    }
      //走轮廓
      rotate(0,mm*widthx);  
      rotate(1,mm*widthy);
@@ -197,7 +208,7 @@
     pc.printf("reading\r\n");
     for (int i = 0; fscanf(fp_drawing, "(%f,%f,%f)", &x, &y, &v) == 3; i++) 
     {
-        pc.printf("(%f,%f,%f)\r\n", x, y, v);
+        pc.printf("(%f,%f,%f)|%d|%d\r\n", x, y, v,i,dot);
         moveto(x, y);
         markdot(v);
         // moveto(thedata[i][0],thedata[i][1]);
@@ -209,10 +220,16 @@
 void on_control_cmd(const char* actuator_name, const char* control_value)
 {
     //pc.printf("Received [%s] [%s]\r\n", actuator_name, control_value);
-    if (strcmp(actuator_name, "dat") == 0&&status==3) {
+    if (strcmp(actuator_name, "dat") == 0) {
         //接受到的坐标数据写入存储卡
-        //pc.printf("Received yes\n");
+        //fprintf(fp_drawing, "%s", control_value);
         fprintf(fp_drawing, "%s", control_value);
+        dot++;
+        if(strcmp(control_value, "(0,0,1)") == 0)
+        {
+            flag=1;
+            pc.printf("received (0,0,1)  %d|%d\r\n",status,dot);
+        }
     } 
     else if (strcmp(actuator_name, "cmd") == 0) {
         int the_command = atoi(control_value);
@@ -226,7 +243,7 @@
                 }
                 if (key==2) {
                     x=the_command;
-                    pc.printf("Received x %f\n",y);
+                    pc.printf("Received x %f\n",x);
             
                 }
                 if (key==3) {
@@ -245,9 +262,9 @@
                     Getdata = 1;
                     pc.printf("Received Getdata %d\n",Getdata);
                 }
-                else if (the_command == 3&&status==2&&key==0) {//传k
+                /*else if (the_command == 3&&status==2&&key==0) {//传k
                     key=1;
-                }
+                }*/
                 else if (the_command == 4&&status==2&&key==0) {//传x
                     key=2;
                 }
@@ -298,33 +315,43 @@
     Getawork = 0;
     Getdata = 0;
 
-    publish_value(client, "report", "input x:");
-    client.yield(5000);
-    publish_value(client, "report", "input y:");
-    client.yield(5000);
-      
-    pc.printf("input k:\r\n");
-    publish_value(client, "report", "input k:");
-    wait(1);
-    int i=10;
-    while(y*k>widthy||i>0)
-    {
-        pc.printf("no%f|%f|%f|%d\r\n",y,k,y*k,i);
-        client.yield(1000);
-        i--;
-    }
-    pc.printf("yes%f|%f|%f\r\n",y,k,y*k);
-    pc.printf("ready.\r\n");
+    //pc.printf("yes%f|%f|%f\r\n",y,k,y*k);
+    //pc.printf("ready.\r\n");
     
     
     pc.printf("biginning\r\n");
     biginning();
     pc.printf("finish\r\n");
     
+    //draw();
+    
     while (true) 
     {
+        if(x==0||y==0&&status==2)
+        {
+            while(x==0&&status==2)
+            {   
+                pc.printf("waiting x\r\n");
+                publish_value(client, "report", "input x:");
+                client.yield(5000);
+            }
+            while(y==0&&status==2)
+            {
+                pc.printf("waiting y\r\n");
+                publish_value(client, "report", "input y:");
+                client.yield(5000);
+            }
+            publish_value(client, "report", "ready.");
+        }
+        while(y*k>widthy&&status==2)
+        {
+            k-=0.01;
+            pc.printf("no%f|%f|%f\r\n",y,k,y*k);
+            wait(0.001);
+        }
         if (status == 2) 
         {
+            
             if (Getawork) 
             { //收到新任务
                 Getawork = 0;
@@ -336,18 +363,22 @@
                     pc.printf("File opened\r\n");
                     status = 3;
                     publish_value(client, "report", "wait data.");
+                    pc.printf("wait data.%d\r\n",status);
                 }
             }
-            else
-            {
-                 wait(0.1);
-                 publish_value(client, "report", "ready.");
-             }
+             
         }
 
          
-        else if (status == 3) 
+        if (status == 3) 
         {
+            if(flag==1)
+            {
+                //wait(15);
+                
+                publish_value(client, "report", "all wrote.");
+                pc.printf("wrote finish  %d\r\n",status);
+            }
             if (Getdata) 
             { //数据接收完
                 Getdata = 0;
@@ -357,17 +388,27 @@
                 status = 4;
             }
         } 
-        else if (status == 4) 
+        if (status == 4) 
         {
             // pc.printf("debug4 \r\n");
             // dealdata();
-            pc.printf("Drawing..  %d \r\n",status);
+            pc.printf("Drawing..  %d |%d\r\n",status,dot);
             // usbprintdata();
             draw();
             publish_value(client, "report", "done.");
+            pc.printf("done.  %d \r\n",status);
             status = 2;
+            x=0;
+            y=0;
+            Getawork = 0;
+            Getdata = 0;
+            unit_xy=200;
+            k=1.0;
+            flag=0;
+            dot=0;
+            //strcpy(w,"");
         }
         client.yield(1000);
     }
-
+    
 }