Diff: Capteurs/Nucleo/EncoderMspInitF4.cpp

Revision:

0:1cfd66c3a181

diff -r 000000000000 -r 1cfd66c3a181 Capteurs/Nucleo/EncoderMspInitF4.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Capteurs/Nucleo/EncoderMspInitF4.cpp	Wed May 22 16:54:27 2019 +0000
@@ -0,0 +1,57 @@
+#include "mbed.h"
+/*
+ * HAL_TIM_Encoder_MspInit()
+ * Overrides the __weak function stub in stm32f4xx_hal_tim.h
+ *
+ * Edit the below for your preferred pin wiring & pullup/down
+ * I have encoder common at 3V3, using GPIO_PULLDOWN on inputs.
+ * Encoder A&B outputs connected directly to GPIOs.
+ *
+ * www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00102166.pdf
+ * www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00141306.pdf
+ *
+ * TIM3_CH1: AF2 @ PA_6, PB_4, PC_6
+ * TIM3_CH2: AF2 @ PA_7, PB_5, PC_7
+ *
+ * TIM4_CH1: AF2 @ PB_6, PD_12
+ * TIM4_CH2: AF2 @ PB_7, PD_13
+ *
+ */
+
+#ifdef TARGET_STM32F4
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+    GPIO_InitTypeDef GPIO_InitStruct;
+    
+    // Timer 3:
+    if (htim->Instance == TIM3) { // PB4 PB5 = Nucleo D5 D4
+        __TIM3_CLK_ENABLE();
+        __GPIOB_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_4 | GPIO_PIN_5;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_PULLUP;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
+        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+        
+        // Interruption:
+        HAL_NVIC_SetPriority(TIM3_IRQn,0,0);
+        HAL_NVIC_EnableIRQ(TIM3_IRQn);
+    }
+    // Timer 4:
+    else if (htim->Instance == TIM4) { // PB6 PB7 = Nucleo D10 MORPHO_PB7
+        __TIM4_CLK_ENABLE();
+        __GPIOB_CLK_ENABLE();
+        GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;
+        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull = GPIO_PULLUP;
+        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+        GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
+        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+        // Interruption:
+        HAL_NVIC_SetPriority(TIM4_IRQn,0,0);
+        HAL_NVIC_EnableIRQ(TIM4_IRQn);
+    }
+}
+#endif