David Möschwitzer / GpioExpander

-

PCA9555/PCA9555.cpp@1:f54358de8a86, 2019-02-21 (annotated)

Committer:
x1dmoesc
Date:
Thu Feb 21 08:32:10 2019 +0000
Revision:
1:f54358de8a86
Parent:
0:3835ff675f6b 
redefine PCA9555.h

Who changed what in which revision?

UserRevisionLine numberNew contents of line
x1dmoesc 0:3835ff675f6b 1 #include <PCA9555.h>
x1dmoesc 0:3835ff675f6b 2
x1dmoesc 0:3835ff675f6b 3 //#include <mbed.h>
x1dmoesc 0:3835ff675f6b 4
x1dmoesc 0:3835ff675f6b 5 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 6 // uiAdr: user address [A2...A0]
x1dmoesc 0:3835ff675f6b 7 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 8 PCA9555::PCA9555(I2C *_i2c, uint8_t uiAdr) //
x1dmoesc 0:3835ff675f6b 9 : PCA9555_W( HARD_ADR | (uiAdr & USER_ADR_MASK) << 1),// Initialisation of const WRITE
x1dmoesc 0:3835ff675f6b 10 PCA9555_R( PCA9555_W | 0x01 ){ // Initialisation of const READ
x1dmoesc 0:3835ff675f6b 11
x1dmoesc 0:3835ff675f6b 12 i2c = _i2c; //
x1dmoesc 0:3835ff675f6b 13 bAck = false; //
x1dmoesc 0:3835ff675f6b 14 }
x1dmoesc 0:3835ff675f6b 15
x1dmoesc 0:3835ff675f6b 16
x1dmoesc 0:3835ff675f6b 17
x1dmoesc 0:3835ff675f6b 18 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 19 // If a bit in this register is set (written with ‘1’), the corresponding port
x1dmoesc 0:3835ff675f6b 20 // pin is enabled as an input with high-impedance output driver. If a bit in
x1dmoesc 0:3835ff675f6b 21 // this register is cleared (written with ‘0’), the corresponding port pin is
x1dmoesc 0:3835ff675f6b 22 // enabled as an output.
x1dmoesc 0:3835ff675f6b 23 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 24 bool PCA9555::confDirGPIO(_GPIO gpio, uint8_t uiData0, uint8_t uiData1){
x1dmoesc 0:3835ff675f6b 25
x1dmoesc 0:3835ff675f6b 26 if (gpio == BOTH){ // both GPIO ports
x1dmoesc 0:3835ff675f6b 27 cCmd[0] = PORT0_CONFIG; // start with GPIO Port0
x1dmoesc 0:3835ff675f6b 28 cCmd[1] = uiData0; // uiData0 for GPIO Port 0
x1dmoesc 0:3835ff675f6b 29 cCmd[2] = uiData1; // uiData1 for GPIO Port 1
x1dmoesc 0:3835ff675f6b 30
x1dmoesc 0:3835ff675f6b 31 bAck = i2c->write(PCA9555_W, cCmd, 3); // send via I2C
x1dmoesc 0:3835ff675f6b 32
x1dmoesc 0:3835ff675f6b 33 } else { // only
x1dmoesc 0:3835ff675f6b 34 if (gpio == PORT0) cCmd[0] = PORT0_CONFIG; // Port0
x1dmoesc 0:3835ff675f6b 35 else cCmd[0] = PORT1_CONFIG; // Port1
x1dmoesc 0:3835ff675f6b 36
x1dmoesc 0:3835ff675f6b 37 cCmd[1] = uiData0; // uiData
x1dmoesc 1:f54358de8a86 38 bAck = i2c->write(PCA9555_W, cCmd, 2); // send via I2C
x1dmoesc 0:3835ff675f6b 39 }
x1dmoesc 0:3835ff675f6b 40
x1dmoesc 0:3835ff675f6b 41 return bAck; // return (N)ACK
x1dmoesc 0:3835ff675f6b 42 }
x1dmoesc 0:3835ff675f6b 43
x1dmoesc 0:3835ff675f6b 44
x1dmoesc 0:3835ff675f6b 45 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 46 //
x1dmoesc 0:3835ff675f6b 47 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 48 bool PCA9555::getGPIO(_GPIO gpio){
x1dmoesc 0:3835ff675f6b 49
x1dmoesc 0:3835ff675f6b 50 if (gpio == BOTH){ // both GPIO ports
x1dmoesc 0:3835ff675f6b 51 cCmd[0] = PORT0_INPUT; // start with GPIO Port0
x1dmoesc 0:3835ff675f6b 52
x1dmoesc 0:3835ff675f6b 53 bAck = i2c->write(PCA9555_W, cCmd, 1); // send via I2C
x1dmoesc 0:3835ff675f6b 54 bAck = i2c->read(PCA9555_R, cCmd, 2); // send via I2C
x1dmoesc 0:3835ff675f6b 55 GPIO0.uiPort = cCmd[0];
x1dmoesc 0:3835ff675f6b 56 GPIO1.uiPort = cCmd[1];
x1dmoesc 0:3835ff675f6b 57
x1dmoesc 0:3835ff675f6b 58 } else { // only
x1dmoesc 0:3835ff675f6b 59 if (gpio == PORT0) cCmd[0] = PORT0_INPUT; // Port0
x1dmoesc 0:3835ff675f6b 60 else cCmd[0] = PORT1_INPUT; // Port1
x1dmoesc 0:3835ff675f6b 61
x1dmoesc 0:3835ff675f6b 62 bAck = i2c->write(PCA9555_W, cCmd, 1); // send via I2C
x1dmoesc 0:3835ff675f6b 63 bAck = i2c->read(PCA9555_W, cCmd, 1); // send via I2C
x1dmoesc 0:3835ff675f6b 64
x1dmoesc 0:3835ff675f6b 65 if (gpio == PORT0) GPIO0.uiPort = cCmd[0]; // Port0
x1dmoesc 0:3835ff675f6b 66 else GPIO1.uiPort = cCmd[0]; // Port0
x1dmoesc 0:3835ff675f6b 67 }
x1dmoesc 0:3835ff675f6b 68
x1dmoesc 0:3835ff675f6b 69 return bAck; // return (N)ACK
x1dmoesc 0:3835ff675f6b 70 }
x1dmoesc 0:3835ff675f6b 71
x1dmoesc 0:3835ff675f6b 72
x1dmoesc 0:3835ff675f6b 73
x1dmoesc 0:3835ff675f6b 74 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 75 //
x1dmoesc 0:3835ff675f6b 76 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 77 uint8_t PCA9555::getGPIO0(bool bUpdate){
x1dmoesc 0:3835ff675f6b 78
x1dmoesc 0:3835ff675f6b 79 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 80
x1dmoesc 0:3835ff675f6b 81 return GPIO0.uiPort;
x1dmoesc 0:3835ff675f6b 82 }
x1dmoesc 0:3835ff675f6b 83
x1dmoesc 0:3835ff675f6b 84
x1dmoesc 0:3835ff675f6b 85
x1dmoesc 0:3835ff675f6b 86 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 87 //
x1dmoesc 0:3835ff675f6b 88 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 89 bool PCA9555::getGPIO0_B0(bool bUpdate){
x1dmoesc 0:3835ff675f6b 90
x1dmoesc 0:3835ff675f6b 91 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 92
x1dmoesc 0:3835ff675f6b 93 return (bool) GPIO0.Pin.B0;
x1dmoesc 0:3835ff675f6b 94 }
x1dmoesc 0:3835ff675f6b 95
x1dmoesc 0:3835ff675f6b 96
x1dmoesc 0:3835ff675f6b 97
x1dmoesc 0:3835ff675f6b 98 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 99 //
x1dmoesc 0:3835ff675f6b 100 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 101 bool PCA9555::getGPIO0_B1(bool bUpdate){
x1dmoesc 0:3835ff675f6b 102
x1dmoesc 0:3835ff675f6b 103 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 104
x1dmoesc 0:3835ff675f6b 105 return GPIO0.Pin.B1;
x1dmoesc 0:3835ff675f6b 106
x1dmoesc 0:3835ff675f6b 107 }
x1dmoesc 0:3835ff675f6b 108
x1dmoesc 0:3835ff675f6b 109
x1dmoesc 0:3835ff675f6b 110
x1dmoesc 0:3835ff675f6b 111 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 112 //
x1dmoesc 0:3835ff675f6b 113 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 114 bool PCA9555::getGPIO0_B2(bool bUpdate){
x1dmoesc 0:3835ff675f6b 115
x1dmoesc 0:3835ff675f6b 116 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 117
x1dmoesc 0:3835ff675f6b 118 return GPIO0.Pin.B2;
x1dmoesc 0:3835ff675f6b 119 }
x1dmoesc 0:3835ff675f6b 120
x1dmoesc 0:3835ff675f6b 121
x1dmoesc 0:3835ff675f6b 122
x1dmoesc 0:3835ff675f6b 123 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 124 //
x1dmoesc 0:3835ff675f6b 125 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 126 bool PCA9555::getGPIO0_B3(bool bUpdate){
x1dmoesc 0:3835ff675f6b 127
x1dmoesc 0:3835ff675f6b 128 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 129
x1dmoesc 0:3835ff675f6b 130 return GPIO0.Pin.B3;
x1dmoesc 0:3835ff675f6b 131
x1dmoesc 0:3835ff675f6b 132 }
x1dmoesc 0:3835ff675f6b 133
x1dmoesc 0:3835ff675f6b 134
x1dmoesc 0:3835ff675f6b 135
x1dmoesc 0:3835ff675f6b 136 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 137 //
x1dmoesc 0:3835ff675f6b 138 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 139 bool PCA9555::getGPIO0_B4(bool bUpdate){
x1dmoesc 0:3835ff675f6b 140
x1dmoesc 0:3835ff675f6b 141 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 142
x1dmoesc 0:3835ff675f6b 143 return GPIO0.Pin.B4;
x1dmoesc 0:3835ff675f6b 144 }
x1dmoesc 0:3835ff675f6b 145
x1dmoesc 0:3835ff675f6b 146
x1dmoesc 0:3835ff675f6b 147
x1dmoesc 0:3835ff675f6b 148 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 149 //
x1dmoesc 0:3835ff675f6b 150 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 151 bool PCA9555::getGPIO0_B5(bool bUpdate){
x1dmoesc 0:3835ff675f6b 152
x1dmoesc 0:3835ff675f6b 153 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 154
x1dmoesc 0:3835ff675f6b 155 return GPIO0.Pin.B5;
x1dmoesc 0:3835ff675f6b 156
x1dmoesc 0:3835ff675f6b 157 }
x1dmoesc 0:3835ff675f6b 158
x1dmoesc 0:3835ff675f6b 159
x1dmoesc 0:3835ff675f6b 160
x1dmoesc 0:3835ff675f6b 161 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 162 //
x1dmoesc 0:3835ff675f6b 163 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 164 bool PCA9555::getGPIO0_B6(bool bUpdate){
x1dmoesc 0:3835ff675f6b 165
x1dmoesc 0:3835ff675f6b 166 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 167
x1dmoesc 0:3835ff675f6b 168 return GPIO0.Pin.B6;
x1dmoesc 0:3835ff675f6b 169 }
x1dmoesc 0:3835ff675f6b 170
x1dmoesc 0:3835ff675f6b 171
x1dmoesc 0:3835ff675f6b 172
x1dmoesc 0:3835ff675f6b 173 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 174 //
x1dmoesc 0:3835ff675f6b 175 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 176 bool PCA9555::getGPIO0_B7(bool bUpdate){
x1dmoesc 0:3835ff675f6b 177
x1dmoesc 0:3835ff675f6b 178 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 179
x1dmoesc 0:3835ff675f6b 180 return GPIO0.Pin.B7;
x1dmoesc 0:3835ff675f6b 181
x1dmoesc 0:3835ff675f6b 182 }
x1dmoesc 0:3835ff675f6b 183
x1dmoesc 0:3835ff675f6b 184
x1dmoesc 0:3835ff675f6b 185 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 186 //
x1dmoesc 0:3835ff675f6b 187 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 188 uint8_t PCA9555::getGPIO1(bool bUpdate){
x1dmoesc 0:3835ff675f6b 189
x1dmoesc 0:3835ff675f6b 190 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 191
x1dmoesc 0:3835ff675f6b 192 return GPIO1.uiPort;
x1dmoesc 0:3835ff675f6b 193 }
x1dmoesc 0:3835ff675f6b 194
x1dmoesc 0:3835ff675f6b 195
x1dmoesc 0:3835ff675f6b 196
x1dmoesc 0:3835ff675f6b 197 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 198 //
x1dmoesc 0:3835ff675f6b 199 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 200 bool PCA9555::getGPIO1_B0(bool bUpdate){
x1dmoesc 0:3835ff675f6b 201
x1dmoesc 0:3835ff675f6b 202 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 203
x1dmoesc 0:3835ff675f6b 204 return GPIO1.Pin.B0;
x1dmoesc 0:3835ff675f6b 205 }
x1dmoesc 0:3835ff675f6b 206
x1dmoesc 0:3835ff675f6b 207
x1dmoesc 0:3835ff675f6b 208
x1dmoesc 0:3835ff675f6b 209 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 210 //
x1dmoesc 0:3835ff675f6b 211 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 212 bool PCA9555::getGPIO1_B1(bool bUpdate){
x1dmoesc 0:3835ff675f6b 213
x1dmoesc 0:3835ff675f6b 214 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 215
x1dmoesc 0:3835ff675f6b 216 return GPIO1.Pin.B1;
x1dmoesc 0:3835ff675f6b 217
x1dmoesc 0:3835ff675f6b 218 }
x1dmoesc 0:3835ff675f6b 219
x1dmoesc 0:3835ff675f6b 220
x1dmoesc 0:3835ff675f6b 221
x1dmoesc 0:3835ff675f6b 222 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 223 //
x1dmoesc 0:3835ff675f6b 224 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 225 bool PCA9555::getGPIO1_B2(bool bUpdate){
x1dmoesc 0:3835ff675f6b 226
x1dmoesc 0:3835ff675f6b 227 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 228
x1dmoesc 0:3835ff675f6b 229 return GPIO1.Pin.B2;
x1dmoesc 0:3835ff675f6b 230 }
x1dmoesc 0:3835ff675f6b 231
x1dmoesc 0:3835ff675f6b 232
x1dmoesc 0:3835ff675f6b 233
x1dmoesc 0:3835ff675f6b 234 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 235 //
x1dmoesc 0:3835ff675f6b 236 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 237 bool PCA9555::getGPIO1_B3(bool bUpdate){
x1dmoesc 0:3835ff675f6b 238
x1dmoesc 0:3835ff675f6b 239 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 240
x1dmoesc 0:3835ff675f6b 241 return GPIO1.Pin.B3;
x1dmoesc 0:3835ff675f6b 242
x1dmoesc 0:3835ff675f6b 243 }
x1dmoesc 0:3835ff675f6b 244
x1dmoesc 0:3835ff675f6b 245
x1dmoesc 0:3835ff675f6b 246
x1dmoesc 0:3835ff675f6b 247 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 248 //
x1dmoesc 0:3835ff675f6b 249 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 250 bool PCA9555::getGPIO1_B4(bool bUpdate){
x1dmoesc 0:3835ff675f6b 251
x1dmoesc 0:3835ff675f6b 252 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 253
x1dmoesc 0:3835ff675f6b 254 return GPIO1.Pin.B4;
x1dmoesc 0:3835ff675f6b 255 }
x1dmoesc 0:3835ff675f6b 256
x1dmoesc 0:3835ff675f6b 257
x1dmoesc 0:3835ff675f6b 258
x1dmoesc 0:3835ff675f6b 259 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 260 //
x1dmoesc 0:3835ff675f6b 261 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 262 bool PCA9555::getGPIO1_B5(bool bUpdate){
x1dmoesc 0:3835ff675f6b 263
x1dmoesc 0:3835ff675f6b 264 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 265
x1dmoesc 0:3835ff675f6b 266 return GPIO1.Pin.B5;
x1dmoesc 0:3835ff675f6b 267
x1dmoesc 0:3835ff675f6b 268 }
x1dmoesc 0:3835ff675f6b 269
x1dmoesc 0:3835ff675f6b 270
x1dmoesc 0:3835ff675f6b 271
x1dmoesc 0:3835ff675f6b 272 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 273 //
x1dmoesc 0:3835ff675f6b 274 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 275 bool PCA9555::getGPIO1_B6(bool bUpdate){
x1dmoesc 0:3835ff675f6b 276
x1dmoesc 0:3835ff675f6b 277 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 278
x1dmoesc 0:3835ff675f6b 279 return GPIO1.Pin.B6;
x1dmoesc 0:3835ff675f6b 280 }
x1dmoesc 0:3835ff675f6b 281
x1dmoesc 0:3835ff675f6b 282
x1dmoesc 0:3835ff675f6b 283
x1dmoesc 0:3835ff675f6b 284 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 285 //
x1dmoesc 0:3835ff675f6b 286 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 287 bool PCA9555::getGPIO1_B7(bool bUpdate){
x1dmoesc 0:3835ff675f6b 288
x1dmoesc 0:3835ff675f6b 289 if(bUpdate) getGPIO(BOTH);
x1dmoesc 0:3835ff675f6b 290
x1dmoesc 0:3835ff675f6b 291 return GPIO1.Pin.B7;
x1dmoesc 0:3835ff675f6b 292
x1dmoesc 0:3835ff675f6b 293 }
x1dmoesc 0:3835ff675f6b 294
x1dmoesc 0:3835ff675f6b 295
x1dmoesc 0:3835ff675f6b 296
x1dmoesc 0:3835ff675f6b 297 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 298 //
x1dmoesc 0:3835ff675f6b 299 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 300 bool PCA9555::setGPIO(_GPIO gpio, uint8_t uiData0, uint8_t uiData1)
x1dmoesc 0:3835ff675f6b 301 {
x1dmoesc 0:3835ff675f6b 302 if(gpio == BOTH){ // both GPIO ports
x1dmoesc 0:3835ff675f6b 303 cCmd[0] = PORT0_OUTPUT; // start with GPIO Port0
x1dmoesc 0:3835ff675f6b 304 cCmd[1] = uiData0; // uiData0 for GPIO Port 0
x1dmoesc 0:3835ff675f6b 305 cCmd[2] = uiData1; // uiData1 for GPIO Port 1
x1dmoesc 0:3835ff675f6b 306
x1dmoesc 0:3835ff675f6b 307 bAck = i2c->write(PCA9555_W, cCmd, 3); // send via I2C
x1dmoesc 0:3835ff675f6b 308
x1dmoesc 0:3835ff675f6b 309 } else { // only
x1dmoesc 0:3835ff675f6b 310 if (gpio == PORT0) cCmd[0] = PORT0_OUTPUT; // Port0
x1dmoesc 0:3835ff675f6b 311 else cCmd[0] = PORT1_OUTPUT; // Port1
x1dmoesc 0:3835ff675f6b 312
x1dmoesc 0:3835ff675f6b 313 cCmd[1] = uiData0; // uiData
x1dmoesc 0:3835ff675f6b 314 bAck = i2c->write(PCA9555_W, cCmd, 2); // send via I2C
x1dmoesc 0:3835ff675f6b 315 }
x1dmoesc 0:3835ff675f6b 316
x1dmoesc 0:3835ff675f6b 317 return bAck; // return (N)ACK
x1dmoesc 0:3835ff675f6b 318 }
x1dmoesc 0:3835ff675f6b 319
x1dmoesc 0:3835ff675f6b 320
x1dmoesc 0:3835ff675f6b 321 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 322 //
x1dmoesc 0:3835ff675f6b 323 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 324 bool PCA9555::setGPIO0_B0(bool bBit){
x1dmoesc 0:3835ff675f6b 325
x1dmoesc 0:3835ff675f6b 326 GPIO0.Pin.B0 = bBit;
x1dmoesc 0:3835ff675f6b 327
x1dmoesc 0:3835ff675f6b 328 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 329 }
x1dmoesc 0:3835ff675f6b 330
x1dmoesc 0:3835ff675f6b 331
x1dmoesc 0:3835ff675f6b 332
x1dmoesc 0:3835ff675f6b 333
x1dmoesc 0:3835ff675f6b 334 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 335 //
x1dmoesc 0:3835ff675f6b 336 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 337 bool PCA9555::setGPIO0_B1(bool bBit){
x1dmoesc 0:3835ff675f6b 338
x1dmoesc 0:3835ff675f6b 339 GPIO0.Pin.B1 = bBit;
x1dmoesc 0:3835ff675f6b 340
x1dmoesc 0:3835ff675f6b 341 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 342 }
x1dmoesc 0:3835ff675f6b 343
x1dmoesc 0:3835ff675f6b 344
x1dmoesc 0:3835ff675f6b 345
x1dmoesc 0:3835ff675f6b 346 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 347 //
x1dmoesc 0:3835ff675f6b 348 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 349 bool PCA9555::setGPIO0_B2(bool bBit){
x1dmoesc 0:3835ff675f6b 350
x1dmoesc 0:3835ff675f6b 351 GPIO0.Pin.B2 = bBit;
x1dmoesc 0:3835ff675f6b 352
x1dmoesc 0:3835ff675f6b 353 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 354 }
x1dmoesc 0:3835ff675f6b 355
x1dmoesc 0:3835ff675f6b 356
x1dmoesc 0:3835ff675f6b 357
x1dmoesc 0:3835ff675f6b 358 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 359 //
x1dmoesc 0:3835ff675f6b 360 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 361 bool PCA9555::setGPIO0_B4(bool bBit){
x1dmoesc 0:3835ff675f6b 362
x1dmoesc 0:3835ff675f6b 363 GPIO0.Pin.B4 = bBit;
x1dmoesc 0:3835ff675f6b 364
x1dmoesc 0:3835ff675f6b 365 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 366 }
x1dmoesc 0:3835ff675f6b 367
x1dmoesc 0:3835ff675f6b 368
x1dmoesc 0:3835ff675f6b 369
x1dmoesc 0:3835ff675f6b 370 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 371 //
x1dmoesc 0:3835ff675f6b 372 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 373 bool PCA9555::setGPIO0_B5(bool bBit){
x1dmoesc 0:3835ff675f6b 374
x1dmoesc 0:3835ff675f6b 375 GPIO0.Pin.B5 = bBit;
x1dmoesc 0:3835ff675f6b 376
x1dmoesc 0:3835ff675f6b 377 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 378 }
x1dmoesc 0:3835ff675f6b 379
x1dmoesc 0:3835ff675f6b 380
x1dmoesc 0:3835ff675f6b 381
x1dmoesc 0:3835ff675f6b 382 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 383 //
x1dmoesc 0:3835ff675f6b 384 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 385 bool PCA9555::setGPIO0_B6(bool bBit){
x1dmoesc 0:3835ff675f6b 386
x1dmoesc 0:3835ff675f6b 387 GPIO0.Pin.B6 = bBit;
x1dmoesc 0:3835ff675f6b 388
x1dmoesc 0:3835ff675f6b 389 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 390 }
x1dmoesc 0:3835ff675f6b 391
x1dmoesc 0:3835ff675f6b 392
x1dmoesc 0:3835ff675f6b 393
x1dmoesc 0:3835ff675f6b 394 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 395 //
x1dmoesc 0:3835ff675f6b 396 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 397 bool PCA9555::setGPIO0_B7(bool bBit){
x1dmoesc 0:3835ff675f6b 398
x1dmoesc 0:3835ff675f6b 399 GPIO0.Pin.B7 = bBit;
x1dmoesc 0:3835ff675f6b 400
x1dmoesc 0:3835ff675f6b 401 return setGPIO(PORT0, GPIO0.uiPort);
x1dmoesc 0:3835ff675f6b 402 }
x1dmoesc 0:3835ff675f6b 403
x1dmoesc 0:3835ff675f6b 404
x1dmoesc 0:3835ff675f6b 405
x1dmoesc 0:3835ff675f6b 406 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 407 //
x1dmoesc 0:3835ff675f6b 408 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 409 bool PCA9555::setGPIO1_B0(bool bBit){
x1dmoesc 0:3835ff675f6b 410
x1dmoesc 0:3835ff675f6b 411 GPIO1.Pin.B0 = bBit;
x1dmoesc 0:3835ff675f6b 412
x1dmoesc 0:3835ff675f6b 413 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 414 }
x1dmoesc 0:3835ff675f6b 415
x1dmoesc 0:3835ff675f6b 416
x1dmoesc 0:3835ff675f6b 417
x1dmoesc 0:3835ff675f6b 418
x1dmoesc 0:3835ff675f6b 419 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 420 //
x1dmoesc 0:3835ff675f6b 421 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 422 bool PCA9555::setGPIO1_B1(bool bBit){
x1dmoesc 0:3835ff675f6b 423
x1dmoesc 0:3835ff675f6b 424 GPIO1.Pin.B1 = bBit;
x1dmoesc 0:3835ff675f6b 425
x1dmoesc 0:3835ff675f6b 426 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 427 }
x1dmoesc 0:3835ff675f6b 428
x1dmoesc 0:3835ff675f6b 429
x1dmoesc 0:3835ff675f6b 430
x1dmoesc 0:3835ff675f6b 431 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 432 //
x1dmoesc 0:3835ff675f6b 433 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 434 bool PCA9555::setGPIO1_B2(bool bBit){
x1dmoesc 0:3835ff675f6b 435
x1dmoesc 0:3835ff675f6b 436 GPIO1.Pin.B2 = bBit;
x1dmoesc 0:3835ff675f6b 437
x1dmoesc 0:3835ff675f6b 438 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 439 }
x1dmoesc 0:3835ff675f6b 440
x1dmoesc 0:3835ff675f6b 441
x1dmoesc 0:3835ff675f6b 442
x1dmoesc 0:3835ff675f6b 443 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 444 //
x1dmoesc 0:3835ff675f6b 445 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 446 bool PCA9555::setGPIO1_B4(bool bBit){
x1dmoesc 0:3835ff675f6b 447
x1dmoesc 0:3835ff675f6b 448 GPIO1.Pin.B4 = bBit;
x1dmoesc 0:3835ff675f6b 449
x1dmoesc 0:3835ff675f6b 450 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 451 }
x1dmoesc 0:3835ff675f6b 452
x1dmoesc 0:3835ff675f6b 453
x1dmoesc 0:3835ff675f6b 454
x1dmoesc 0:3835ff675f6b 455 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 456 //
x1dmoesc 0:3835ff675f6b 457 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 458 bool PCA9555::setGPIO1_B5(bool bBit){
x1dmoesc 0:3835ff675f6b 459
x1dmoesc 0:3835ff675f6b 460 GPIO1.Pin.B5 = bBit;
x1dmoesc 0:3835ff675f6b 461
x1dmoesc 0:3835ff675f6b 462 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 463 }
x1dmoesc 0:3835ff675f6b 464
x1dmoesc 0:3835ff675f6b 465
x1dmoesc 0:3835ff675f6b 466
x1dmoesc 0:3835ff675f6b 467 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 468 //
x1dmoesc 0:3835ff675f6b 469 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 470 bool PCA9555::setGPIO1_B6(bool bBit){
x1dmoesc 0:3835ff675f6b 471
x1dmoesc 0:3835ff675f6b 472 GPIO1.Pin.B6 = bBit;
x1dmoesc 0:3835ff675f6b 473
x1dmoesc 0:3835ff675f6b 474 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 475 }
x1dmoesc 0:3835ff675f6b 476
x1dmoesc 0:3835ff675f6b 477
x1dmoesc 0:3835ff675f6b 478
x1dmoesc 0:3835ff675f6b 479 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 480 //
x1dmoesc 0:3835ff675f6b 481 //******************************************************************************//
x1dmoesc 0:3835ff675f6b 482 bool PCA9555::setGPIO1_B7(bool bBit){
x1dmoesc 0:3835ff675f6b 483
x1dmoesc 0:3835ff675f6b 484 GPIO1.Pin.B7 = bBit;
x1dmoesc 0:3835ff675f6b 485
x1dmoesc 0:3835ff675f6b 486 return setGPIO(PORT1, GPIO1.uiPort);
x1dmoesc 0:3835ff675f6b 487 }
x1dmoesc 0:3835ff675f6b 488