Diff: Drivers/SPIBlockDevice/SPIFBlockDevice.h

Revision:

1:f60eafbf009a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Drivers/SPIBlockDevice/SPIFBlockDevice.h	Wed Apr 10 14:56:25 2019 +0300
@@ -0,0 +1,157 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPIF_BLOCK_DEVICE_H
+#define MBED_SPIF_BLOCK_DEVICE_H
+
+#include <mbed.h>
+#include "BlockDevice.h"
+
+ 
+/** BlockDevice for SPI based flash devices
+ *  such as the MX25R or SST26F016B
+ *
+ *  @code
+ *  // Here's an example using the MX25R SPI flash device on the K82F
+ *  #include "mbed.h"
+ *  #include "SPIFBlockDevice.h"
+ *  
+ *  // Create flash device on SPI bus with PTE5 as chip select
+ *  SPIFBlockDevice spif(PTE2, PTE4, PTE1, PTE5);
+ *  
+ *  int main() {
+ *      printf("spif test\n");
+ *  
+ *      // Initialize the SPI flash device and print the memory layout
+ *      spif.init();
+ *      printf("spif size: %llu\n",         spif.size());
+ *      printf("spif read size: %llu\n",    spif.get_read_size());
+ *      printf("spif program size: %llu\n", spif.get_program_size());
+ *      printf("spif erase size: %llu\n",   spif.get_erase_size());
+ *  
+ *      // Write "Hello World!" to the first block
+ *      char *buffer = (char*)malloc(spif.get_erase_size());
+ *      sprintf(buffer, "Hello World!\n");
+ *      spif.erase(0, spif.get_erase_size());
+ *      spif.program(buffer, 0, spif.get_erase_size());
+ *  
+ *      // Read back what was stored
+ *      spif.read(buffer, 0, spif.get_erase_size());
+ *      printf("%s", buffer);
+ *  
+ *      // Deinitialize the device
+ *      spif.deinit();
+ *  }
+ *  @endcode
+ */
+class SPIFBlockDevice : public BlockDevice {
+public:
+    /** Creates a SPIFBlockDevice on a SPI bus specified by pins
+     *
+     *  @param mosi     SPI master out, slave in pin
+     *  @param miso     SPI master in, slave out pin
+     *  @param sclk     SPI clock pin
+     *  @param csel     SPI chip select pin
+     *  @param freq     Clock speed of the SPI bus (defaults to 40MHz)
+     */
+    SPIFBlockDevice(PinName mosi, PinName miso, PinName sclk, PinName csel, int freq=40000000);
+
+    /** Initialize a block device
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int init();
+
+    /** Deinitialize a block device
+     *
+     *  @return         0 on success or a negative error code on failure
+     */
+    virtual int deinit();
+
+    /** Read blocks from a block device
+     *
+     *  @param buffer   Buffer to write blocks to
+     *  @param addr     Address of block to begin reading from
+     *  @param size     Size to read in bytes, must be a multiple of read block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int read(void *buffer, bd_addr_t addr, bd_size_t size);
+
+    /** Program blocks to a block device
+     *
+     *  The blocks must have been erased prior to being programmed
+     *
+     *  @param buffer   Buffer of data to write to blocks
+     *  @param addr     Address of block to begin writing to
+     *  @param size     Size to write in bytes, must be a multiple of program block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size);
+
+    /** Erase blocks on a block device
+     *
+     *  The state of an erased block is undefined until it has been programmed
+     *
+     *  @param addr     Address of block to begin erasing
+     *  @param size     Size to erase in bytes, must be a multiple of erase block size
+     *  @return         0 on success, negative error code on failure
+     */
+    virtual int erase(bd_addr_t addr, bd_size_t size);
+
+    /** Get the size of a readable block
+     *
+     *  @return         Size of a readable block in bytes
+     */
+    virtual bd_size_t get_read_size() const;
+
+    /** Get the size of a programable block
+     *
+     *  @return         Size of a programable block in bytes
+     *  @note Must be a multiple of the read size
+     */
+    virtual bd_size_t get_program_size() const;
+
+    /** Get the size of a eraseable block
+     *
+     *  @return         Size of a eraseable block in bytes
+     *  @note Must be a multiple of the program size
+     */
+    virtual bd_size_t get_erase_size() const;
+
+    /** Get the total size of the underlying device
+     *
+     *  @return         Size of the underlying device in bytes
+     */
+    virtual bd_size_t size() const;
+    
+private:
+    // Master side hardware
+    SPI _spi;
+    DigitalOut _cs;
+
+    // Device configuration discovered through sfdp
+    bd_size_t _size;
+
+    // Internal functions
+    int _wren();
+    int _sync();
+    void _cmdread(uint8_t op, uint32_t addrc, uint32_t retc,
+            uint32_t addr, uint8_t *rets);
+    void _cmdwrite(uint8_t op, uint32_t addrc, uint32_t argc,
+            uint32_t addr, const uint8_t *args);
+};
+
+
+#endif  /* MBED_SPIF_BLOCK_DEVICE_H */