Diff: MMA8451Q/MMA8451Q.cpp

Revision:

0:7b58cdacf811

diff -r 000000000000 -r 7b58cdacf811 MMA8451Q/MMA8451Q.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MMA8451Q/MMA8451Q.cpp	Wed Apr 16 12:20:12 2014 +0000
@@ -0,0 +1,155 @@
+/* Copyright (c) 2010-2011 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include "MMA8451Q.h"
+
+#define INT_SOURCE        0x0C 
+#define REG_WHO_AM_I      0x0D
+#define HP_FILTER_CUTOFF  0x0F 
+#define PULSE_CFG         0x21 
+#define PULSE_SRC         0x22 
+#define PULSE_THSX        0x23 
+#define PULSE_THSY        0x24 
+#define PULSE_THSZ        0x25 
+#define PULSE_TMLT        0x26 
+#define PULSE_LTCY        0x27 
+#define PULSE_WIND        0x28 
+#define REG_CTRL_REG_1    0x2A 
+#define CTRL_REG2         0x2B
+#define CTRL_REG4         0x2D 
+#define CTRL_REG5         0x2E 
+#define REG_OUT_X_MSB     0x01
+#define REG_OUT_Y_MSB     0x03
+#define REG_OUT_Z_MSB     0x05
+
+#define UINT14_MAX        16383
+
+MMA8451Q::MMA8451Q(PinName sda, PinName scl, int addr) : m_i2c(sda, scl), m_addr(addr) {
+    // activate the peripheral
+    uint8_t data[2] = {REG_CTRL_REG_1, 0x01};
+    writeRegs(data, 2);
+}
+
+MMA8451Q::~MMA8451Q() { }
+
+uint8_t MMA8451Q::getWhoAmI() {
+    uint8_t who_am_i = 0;
+    readRegs(REG_WHO_AM_I, &who_am_i, 1);
+    return who_am_i;
+}
+
+float MMA8451Q::getAccX() {
+//divide by 4096 b/c MMA output is 4096 counts per g so this f outputs accelorometer value formatted to g (gravity)
+    return (float(getAccAxis(REG_OUT_X_MSB))/4096.0);
+}
+
+float MMA8451Q::getAccY() {
+    return (float(getAccAxis(REG_OUT_Y_MSB))/4096.0);
+}
+
+float MMA8451Q::getAccZ() {
+    return (float(getAccAxis(REG_OUT_Z_MSB))/4096.0);
+}
+
+void MMA8451Q::getAccAllAxis(float * res) {
+    res[0] = getAccX();
+    res[1] = getAccY();
+    res[2] = getAccZ();
+}
+
+int16_t MMA8451Q::getAccAxis(uint8_t addr) {
+    int16_t acc;
+    uint8_t res[2];
+    readRegs(addr, res, 2);
+
+    acc = (res[0] << 6) | (res[1] >> 2);
+    if (acc > UINT14_MAX/2)
+        acc -= UINT14_MAX;
+
+    return acc;
+}
+
+void MMA8451Q::setDoubleTap(void){
+//Implemented directly from Freescale's AN4072 
+//Added to MMA8451Q lib
+
+    uint8_t CTRL_REG1_Data;
+//    int adds;
+   uint8_t data[2] = {REG_CTRL_REG_1, 0x08};
+    
+    //400 Hz, Standby Mode
+    writeRegs(data,2);
+    
+    //Enable X, Y and Z Double Pulse with DPA = 0 no double pulse abort    
+    data[0]=PULSE_CFG;data[1]=0x2A;
+    writeRegs(data,2);
+    
+    //SetThreshold 3g on X and Y and 5g on Z
+    //Note: Every step is 0.063g
+    //3 g/0.063g = 48 counts
+    //5g/0.063g = 79 counts
+    data[0]=PULSE_THSX;data[1]=0x30;
+    writeRegs(data,2);//Set X Threshold to 3g 
+    data[0]=PULSE_THSY;data[1]=0x30;
+    writeRegs(data,2);//Set Y Threshold to 3g 
+    data[0]=PULSE_THSZ;data[1]=0x4F;
+    writeRegs(data,2);//Set Z Threshold to 5g
+
+    //Set Time Limit for Tap Detection to 60 ms LP Mode
+    //Note: 400 Hz ODR, Time step is 1.25 ms per step
+    //60 ms/1.25 ms = 48 counts 
+    data[0]=PULSE_TMLT;data[1]=0x30;
+    writeRegs(data,2);//60 ms
+    
+    //Set Latency Time to 200 ms
+    //Note: 400 Hz ODR LPMode, Time step is 2.5 ms per step 00 ms/2.5 ms = 80 counts
+    data[0]=PULSE_LTCY;data[1]=0x50;
+    writeRegs(data,2);//200 ms
+    
+    //Set Time Window for second tap to 300 ms
+    //Note: 400 Hz ODR LP Mode, Time step is 2.5 ms per step
+    //300 ms/2.5 ms = 120 counts
+    data[0]=PULSE_WIND;data[1]=0x78;
+    writeRegs(data,2);//300 ms
+    
+    //Route INT1 to System Interrupt
+    data[0]=CTRL_REG4;data[1]=0x08;
+    writeRegs(data,2);//Enable Pulse Interrupt in System CTRL_REG4
+    data[0]=CTRL_REG5;data[1]=0x08; 
+    writeRegs(data,2);//Route Pulse Interrupt to INT1 hardware Pin CTRL_REG5
+
+    //Set the device to Active Mode
+    readRegs(0x2A,&CTRL_REG1_Data,1);//Read out the contents of the register 
+    CTRL_REG1_Data |= 0x01; //Change the value in the register to Active Mode.
+    data[0]=REG_CTRL_REG_1; 
+    data[1]=CTRL_REG1_Data;
+    writeRegs(data,2);//Write in the updated value to put the device in Active Mode
+}
+
+
+void MMA8451Q::readRegs(int addr, uint8_t * data, int len) {
+    char t[1] = {addr};
+    m_i2c.write(m_addr, t, 1, true);
+    m_i2c.read(m_addr, (char *)data, len);
+}
+
+
+
+void MMA8451Q::writeRegs(uint8_t * data, int len) {
+    m_i2c.write(m_addr, (char *)data, len);
+}