cf wu
richlink
Revision 33:e09fff6b149f, committed 2021-06-16
- Comitter:
- wright0418
- Date:
- Wed Jun 16 11:05:30 2021 +0000
- Parent:
- 32:9dfefb53a199
- Commit message:
- 2 test
Changed in this revision
--- a/epy_main.cpp Sun Jun 13 04:11:43 2021 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,272 +0,0 @@
-/* ePy-Lite BLE usage example
- * Copyright (c) 2021 Richlink Technology
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "mbed.h"
-#include "USBSerial.h"
-#include "epy_lite_io.h"
-
-#if MBED_MAJOR_VERSION < 6
-#error "Mbed OS version requires 6 or later."
-#endif
-
-#include "SPIFBlockDevice.h"
-
-// Disable Write Protection and Hold functions
-DigitalOut spif_wp(SPIFLASH_WP, 1);
-DigitalOut spif_hold(SPIFLASH_HOLD, 1);
-
-/*
-BlockDevice *bd = new SPIFBlockDevice(MBED_CONF_SPIF_DRIVER_SPI_MOSI,
- MBED_CONF_SPIF_DRIVER_SPI_MISO,
- MBED_CONF_SPIF_DRIVER_SPI_CLK,
- MBED_CONF_SPIF_DRIVER_SPI_CS);
-*/
-BlockDevice *bd = new SPIFBlockDevice(SPIFLASH_MOSI,
- SPIFLASH_MISO,
- SPIFLASH_CLK,
- SPIFLASH_CS);
-
-// This example uses LittleFileSystem as the default file system
-#include "LittleFileSystem.h"
-LittleFileSystem fs("fs");
-
-// Uncomment the following two lines and comment the previous two to use FAT file system.
-// #include "FATFileSystem.h"
-// FATFileSystem fs("fs");
-
-
-USBSerial *_console;
-
-BufferedSerial *_ble_serial;
-ATCmdParser *_parser;
-
-Ticker flipper;
-DigitalOut _led(LED_Y, 0);
-DigitalOut _ledr(LED_R, 0);
-DigitalOut _ledb(LED_B, 0);
-
-void flip_led()
-{
- _led = !_led;
-}
-
-void ble_recv()
-{
- unsigned char c;
-
- while(_ble_serial->readable()) {
- _ledb = !_ledb;
- _ble_serial->read(&c, 1);
- _console->write(&c, 1);
- }
-}
-
-void console_recv()
-{
- static bool pt_mode = false;
- unsigned char c;
-
- while(_console->readable()) {
- _ledr = !_ledr;
- _console->read(&c, 1);
- if (pt_mode == true)
- {
- if (c == '\r')
- {
- _console->write("\r\n", 2); // echo to console
- _ble_serial->write("\r\n", 2);
- }
- else if (c == 0x03) // Ctrl-C
- {
- pt_mode = false;
- _console->printf("\r\nExit pass-through Mode\r\n");
- }
- else
- {
- _console->write(&c, 1); // echo to console
- _ble_serial->write(&c, 1);
- }
- }
- else {
- if (c == '?')
- {
- _console->printf("\r\n ? : print this menu");
- _console->printf("\r\n p : enter pass-through mode. Press CTRL-C to exit the mode");
- _console->printf("\r\n v : send AT+VERSION");
- _console->printf("\r\n a : send AT+ADDR=?");
- _console->printf("\r\n r : send AT+RESET");
- _console->printf("\r\n d : send AT+MODE_DATA");
- _console->printf("\r\n c : send !CCMD@");
- _console->printf("\r\n");
- }
- else if (c == 'p')
- {
- pt_mode = true;
- _console->printf("\r\nEnter pass-through mode...\r\n");
- }
- else if (c == 'v')
- {
- //_ble_serial->write("AT+VERSION\r\n", 12);
- _ble_serial->write("AT+VERSION", 10);
- ThisThread::sleep_for(2ms);
- _ble_serial->write("\r\n", 2);
- }
- else if (c == 'a')
- {
- _ble_serial->write("AT+ADDR=?\r\n", 11);
- }
- else if (c == 'r')
- {
- _ble_serial->write("AT+RESET\r\n", 10);
- }
- else if (c == 'd')
- {
- _ble_serial->write("AT+MODE_DATA\r\n", 14);
- }
- else if (c == 'c')
- {
- _ble_serial->write("!CCMD@", 6);
- }
- }
- }
-}
-
-int main()
-{
- flipper.attach(&flip_led, 1s);
-
- _console = new USBSerial(true);
- _ble_serial = new BufferedSerial(BLE_UART_TX, BLE_UART_RX, BLE_DEFAULT_BAUD_RATE);
- _parser = new ATCmdParser(_ble_serial, "\r\n");
- //_parser->debug_on( 0 );
- //_parser->set_delimiter( "\r\n" );
-
-#if 1
- // Try SPI Flash
-
- bd->init();
- _console->printf("spif size: %llu\r\n", bd->size());
- _console->printf("spif read size: %llu\r\n", bd->get_read_size());
- _console->printf("spif program size: %llu\r\n", bd->get_program_size());
- _console->printf("spif erase size: %llu\r\n", bd->get_erase_size());
- _console->printf("Mounting the filesystem... ");
- int err = fs.mount(bd);
- _console->printf("%s\r\n", (err ? "Fail :(" : "OK"));
- if (err) {
- // Reformat if we can't mount the filesystem
- // this should only happen on the first boot
- _console->printf("No filesystem found, formatting... ");
- err = fs.reformat(bd);
- _console->printf("%s\r\n", (err ? "Fail :(" : "OK"));
- if (err) {
- //error("error: %s (%d)\r\n", strerror(-err), err);
- _console->printf("error: %s (%d)\r\n", strerror(-err), err);
- }
- }
-
-#endif
-
-#if 1
-// _console->attach(&console_recv);
-// _ble_serial->attach(&ble_recv, Serial::RxIrq);
- _console->printf("\r\nStart ...");
- _console->printf("\r\nPress ? to show menu ...\r\n");
-
- ThisThread::sleep_for(1s);
-
- //_ble_serial->write("AT+ADDR=?\r\n", 11);
- //ThisThread::sleep_for(1s);
- //_ble_serial->write("AT+VERSION\r\n", 12);
-
- while(1)
- {
- console_recv();
- ble_recv();
- }
-#endif
-
- _console->printf("\r\nATCmdParser on ePy-Lite example\r\n");
- ThisThread::sleep_for(2s);
-
-#if 0
- if (_parser->recv("READY OK"))
- {
- _console->printf("\r\nModule is ready!");
- }
-#endif
-
-#if 0
- // Assume BLE module is in DATA mode, switch to CMD mode
- if (_parser->send("!CCMD@") && _parser->recv("OK"))
- {
- _console->printf("\r\nSwitch to CMD mode success.");
- }
- else {
- _console->printf("\r\nSwitch to Cmd mode timeout.");
- // Assume already in CMD mode
- }
-#endif
-
- //Now get the FW version number of BLE module by sending an AT command
- _console->printf("\r\nATCmdParser: Retrieving FW version");
-
-#if 0
- while(true)
- {
- char s[256];
- if(_parser->read(s, 256) < 0)
- break;
-
- _console->printf("%s\r\n", s);
- }
- _parser->write("AT+VERSION\r\n",12);
-#endif
-
- _parser->write("AT+VERSION\r\n",12);
-
- int ver_major, ver_minor, ver_patch;
- if(_parser->recv("VERSION %d.%d.%d OK", &ver_major, &ver_minor, &ver_patch) /* && _parser->recv("OK") */) {
- _console->printf("\r\nATCmdParser: FW version: %d.%d.%d", ver_major, ver_minor, ver_patch);
- _console->printf("\r\nATCmdParser: Retrieving FW version success");
- } else {
- _console->printf("\r\nATCmdParser: Retrieving FW version failed");
- return -1;
- }
-
- _parser->write("AT+ADDR=?\r\n",11);
-
-#if 1
- if (_parser->recv("MAC_ADD"))
- {
- char mac_addr[20];
- _parser->read(mac_addr, 14);
- _console->printf("\r\nMAC Addr is %s\r\n", mac_addr);
-
- }
-#else
- long int mac_addr;
- if(_parser->recv("MAC_ADDR %lx OK", &mac_addr) /* && _parser->recv("OK") */)
- {
- _console->printf("\r\nATCmdParser: MAC Address : %lx", mac_addr);
- _console->printf("\r\nATCmdParser: Retrieving MAC Address success");
- } else {
- _console->printf("\r\nATCmdParser: Retrieving FW version failed");
- return -1;
- }
-#endif
-
- _console->printf("\r\nDone\r\n");
-}
--- a/main.cpp Sun Jun 13 04:11:43 2021 +0000
+++ b/main.cpp Wed Jun 16 11:05:30 2021 +0000
@@ -1,137 +1,272 @@
-#include <algorithm>
-#include "mbed.h"
-#include "mbed_stats.h"
-#include "TCPSocket.h"
+/* ePy-Lite BLE usage example
+ * Copyright (c) 2021 Richlink Technology
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
-#define MBED_HEAP_STATS_ENABLED 1
-#define USE_HTTP_1_1
-//#define LOCAL_LAN
+#include "mbed.h"
+#include "USBSerial.h"
+#include "epy_lite_io.h"
-namespace {
- // Test connection information
-#ifndef LOCAL_LAN
-const char *HTTP_SERVER_NAME = "www.ifconfig.io";
-#else
-const char *HTTP_SERVER_NAME = "pt22_winserver2.nuvoton.com";
+#if MBED_MAJOR_VERSION < 6
+#error "Mbed OS version requires 6 or later."
#endif
-#ifndef LOCAL_LAN
-const char *HTTP_SERVER_FILE_PATH = "/method";
-const int HTTP_SERVER_PORT = 80;
-#else
-const char *HTTP_SERVER_FILE_PATH = "/examples/arm_mbed/method.txt";
-const int HTTP_SERVER_PORT = 8080;
-#endif
+#include "SPIFBlockDevice.h"
+
+// Disable Write Protection and Hold functions
+DigitalOut spif_wp(SPIFLASH_WP, 1);
+DigitalOut spif_hold(SPIFLASH_HOLD, 1);
+
+/*
+BlockDevice *bd = new SPIFBlockDevice(MBED_CONF_SPIF_DRIVER_SPI_MOSI,
+ MBED_CONF_SPIF_DRIVER_SPI_MISO,
+ MBED_CONF_SPIF_DRIVER_SPI_CLK,
+ MBED_CONF_SPIF_DRIVER_SPI_CS);
+*/
+BlockDevice *bd = new SPIFBlockDevice(SPIFLASH_MOSI,
+ SPIFLASH_MISO,
+ SPIFLASH_CLK,
+ SPIFLASH_CS);
+
+// This example uses LittleFileSystem as the default file system
+#include "LittleFileSystem.h"
+LittleFileSystem fs("fs");
+
+// Uncomment the following two lines and comment the previous two to use FAT file system.
+// #include "FATFileSystem.h"
+// FATFileSystem fs("fs");
- const int RECV_BUFFER_SIZE = 512;
+USBSerial *_console;
+
+BufferedSerial *_ble_serial;
+ATCmdParser *_parser;
- // Test related data
- const char *HTTP_OK_STR = "200 OK";
- const char *HTTP_EXPECT_STR = "GET";
+Ticker flipper;
+DigitalOut _led(LED_Y, 0);
+DigitalOut _ledr(LED_R, 0);
+DigitalOut _ledb(LED_B, 0);
- // Test buffers
- char buffer[RECV_BUFFER_SIZE] = {0};
+void flip_led()
+{
+ _led = !_led;
}
-bool find_substring(const char *first, const char *last, const char *s_first, const char *s_last) {
- const char *f = std::search(first, last, s_first, s_last);
- return (f != last);
+void ble_recv()
+{
+ unsigned char c;
+
+ while(_ble_serial->readable()) {
+ _ledb = !_ledb;
+ _ble_serial->read(&c, 1);
+ _console->write(&c, 1);
+ }
}
-int main() {
-#if MBED_HEAP_STATS_ENABLED
- mbed_stats_heap_t heap_stats;
-#endif
-
-#ifdef MBED_MAJOR_VERSION
- printf("Mbed OS version %d.%d.%d\n\n", MBED_MAJOR_VERSION, MBED_MINOR_VERSION, MBED_PATCH_VERSION);
-#endif
+void console_recv()
+{
+ static bool pt_mode = false;
+ unsigned char c;
- printf("Start WiFi test \r\n");
-
- bool result = true;
- int rc = 0;
+ while(_console->readable()) {
+ _ledr = !_ledr;
+ _console->read(&c, 1);
+ if (pt_mode == true)
+ {
+ if (c == '\r')
+ {
+ _console->write("\r\n", 2); // echo to console
+ _ble_serial->write("\r\n", 2);
+ }
+ else if (c == 0x03) // Ctrl-C
+ {
+ pt_mode = false;
+ _console->printf("\r\nExit pass-through Mode\r\n");
+ }
+ else
+ {
+ _console->write(&c, 1); // echo to console
+ _ble_serial->write(&c, 1);
+ }
+ }
+ else {
+ if (c == '?')
+ {
+ _console->printf("\r\n ? : print this menu");
+ _console->printf("\r\n p : enter pass-through mode. Press CTRL-C to exit the mode");
+ _console->printf("\r\n v : send AT+VERSION");
+ _console->printf("\r\n a : send AT+ADDR=?");
+ _console->printf("\r\n r : send AT+RESET");
+ _console->printf("\r\n d : send AT+MODE_DATA");
+ _console->printf("\r\n c : send !CCMD@");
+ _console->printf("\r\n");
+ }
+ else if (c == 'p')
+ {
+ pt_mode = true;
+ _console->printf("\r\nEnter pass-through mode...\r\n");
+ }
+ else if (c == 'v')
+ {
+ //_ble_serial->write("AT+VERSION\r\n", 12);
+ _ble_serial->write("AT+VERSION", 10);
+ ThisThread::sleep_for(2ms);
+ _ble_serial->write("\r\n", 2);
+ }
+ else if (c == 'a')
+ {
+ _ble_serial->write("AT+ADDR=?\r\n", 11);
+ }
+ else if (c == 'r')
+ {
+ _ble_serial->write("AT+RESET\r\n", 10);
+ }
+ else if (c == 'd')
+ {
+ _ble_serial->write("AT+MODE_DATA\r\n", 14);
+ }
+ else if (c == 'c')
+ {
+ _ble_serial->write("!CCMD@", 6);
+ }
+ }
+ }
+}
- printf("Start Connection ... \r\n");
+int main()
+{
+ flipper.attach(&flip_led, 1s);
+
+ _console = new USBSerial(true);
+ _ble_serial = new BufferedSerial(BLE_UART_TX, BLE_UART_RX, BLE_DEFAULT_BAUD_RATE);
+ _parser = new ATCmdParser(_ble_serial, "\r\n");
+ //_parser->debug_on( 0 );
+ //_parser->set_delimiter( "\r\n" );
+
+#if 1
+ // Try SPI Flash
- NetworkInterface *network_interface = NetworkInterface::get_default_instance();
- if (NULL == network_interface) {
- printf("NULL network interface! Exiting application....\r\n");
- return 0;
+ bd->init();
+ _console->printf("spif size: %llu\r\n", bd->size());
+ _console->printf("spif read size: %llu\r\n", bd->get_read_size());
+ _console->printf("spif program size: %llu\r\n", bd->get_program_size());
+ _console->printf("spif erase size: %llu\r\n", bd->get_erase_size());
+ _console->printf("Mounting the filesystem... ");
+ int err = fs.mount(bd);
+ _console->printf("%s\r\n", (err ? "Fail :(" : "OK"));
+ if (err) {
+ // Reformat if we can't mount the filesystem
+ // this should only happen on the first boot
+ _console->printf("No filesystem found, formatting... ");
+ err = fs.reformat(bd);
+ _console->printf("%s\r\n", (err ? "Fail :(" : "OK"));
+ if (err) {
+ //error("error: %s (%d)\r\n", strerror(-err), err);
+ _console->printf("error: %s (%d)\r\n", strerror(-err), err);
+ }
}
- printf("\n\rUsing WiFi \r\n");
- printf("\n\rConnecting to WiFi..\r\n");
- rc = network_interface->connect();
- if(rc == 0) {
- printf("\n\rConnected to Network successfully\r\n");
- } else {
- printf("\n\rConnection to Network Failed %d! Exiting application....\r\n", rc);
- return 0;
- }
-
- SocketAddress a;
- network_interface->get_ip_address(&a);
- printf("TCP client IP Address is %s\r\n", a.get_ip_address());
-
- //TCPSocket sock(network_interface);
- TCPSocket sock;
- sock.open(network_interface);
+#endif
+
+#if 1
+// _console->attach(&console_recv);
+// _ble_serial->attach(&ble_recv, Serial::RxIrq);
+ _console->printf("\r\nStart ...");
+ _console->printf("\r\nPress ? to show menu ...\r\n");
+
+ ThisThread::sleep_for(1s);
+
+ //_ble_serial->write("AT+ADDR=?\r\n", 11);
+ //ThisThread::sleep_for(1s);
+ //_ble_serial->write("AT+VERSION\r\n", 12);
- printf(" HTTP Connection ... \r\n");
- network_interface->gethostbyname(HTTP_SERVER_NAME, &a);
- a.set_port(HTTP_SERVER_PORT);
- if (sock.connect(a) == 0) {
- printf("HTTP: Connected to %s:%d\r\n", HTTP_SERVER_NAME, HTTP_SERVER_PORT);
+ while(1)
+ {
+ console_recv();
+ ble_recv();
+ }
+#endif
+
+ _console->printf("\r\nATCmdParser on ePy-Lite example\r\n");
+ ThisThread::sleep_for(2s);
+
+#if 0
+ if (_parser->recv("READY OK"))
+ {
+ _console->printf("\r\nModule is ready!");
+ }
+#endif
- // We are constructing GET command like this:
-#ifndef USE_HTTP_1_1
- // GET http://www.ifconfig.io/method HTTP/1.0\n\n
- strcpy(buffer, "GET http://");
- strcat(buffer, HTTP_SERVER_NAME);
- strcat(buffer, HTTP_SERVER_FILE_PATH);
- strcat(buffer, " HTTP/1.0\n\n");
-#else
- // GET /method HTTP/1.1\r\nHost: ifconfig.io\r\nConnection: close\r\n\r\n"
- strcpy(buffer, "GET ");
- strcat(buffer, HTTP_SERVER_FILE_PATH);
- strcat(buffer, " HTTP/1.1\r\nHost: ");
- strcat(buffer, HTTP_SERVER_NAME);
- strcat(buffer, "\r\nConnection: close\r\n\r\n");
+#if 0
+ // Assume BLE module is in DATA mode, switch to CMD mode
+ if (_parser->send("!CCMD@") && _parser->recv("OK"))
+ {
+ _console->printf("\r\nSwitch to CMD mode success.");
+ }
+ else {
+ _console->printf("\r\nSwitch to Cmd mode timeout.");
+ // Assume already in CMD mode
+ }
#endif
-
- // Send GET command
- sock.send(buffer, strlen(buffer));
+
+ //Now get the FW version number of BLE module by sending an AT command
+ _console->printf("\r\nATCmdParser: Retrieving FW version");
+
+#if 0
+ while(true)
+ {
+ char s[256];
+ if(_parser->read(s, 256) < 0)
+ break;
- // Server will respond with HTTP GET's success code
- const int ret = sock.recv(buffer, sizeof(buffer) - 1);
- buffer[ret] = '\0';
-
- // Find 200 OK HTTP status in reply
- bool found_200_ok = find_substring(buffer, buffer + ret, HTTP_OK_STR, HTTP_OK_STR + strlen(HTTP_OK_STR));
- // Find "deny" string in reply
- bool found_expect = find_substring(buffer, buffer + ret, HTTP_EXPECT_STR, HTTP_EXPECT_STR + strlen(HTTP_EXPECT_STR));
+ _console->printf("%s\r\n", s);
+ }
+ _parser->write("AT+VERSION\r\n",12);
+#endif
- if (!found_200_ok) result = false;
- if (!found_expect) result = false;
-
- printf("HTTP: Received %d chars from server\r\n", ret);
- printf("HTTP: Received 200 OK status ... %s\r\n", found_200_ok ? "[OK]" : "[FAIL]");
- printf("HTTP: Received '%s' status ... %s\r\n", HTTP_EXPECT_STR, found_expect ? "[OK]" : "[FAIL]");
- printf("HTTP: Received massage:\r\n\r\n");
- printf("%s", buffer);
+ _parser->write("AT+VERSION\r\n",12);
+
+ int ver_major, ver_minor, ver_patch;
+ if(_parser->recv("VERSION %d.%d.%d OK", &ver_major, &ver_minor, &ver_patch) /* && _parser->recv("OK") */) {
+ _console->printf("\r\nATCmdParser: FW version: %d.%d.%d", ver_major, ver_minor, ver_patch);
+ _console->printf("\r\nATCmdParser: Retrieving FW version success");
+ } else {
+ _console->printf("\r\nATCmdParser: Retrieving FW version failed");
+ return -1;
}
-#if MBED_HEAP_STATS_ENABLED
- mbed_stats_heap_get(&heap_stats);
- printf("Current heap: %lu\r\n", heap_stats.current_size);
- printf("Max heap size: %lu\r\n", heap_stats.max_size);
+ _parser->write("AT+ADDR=?\r\n",11);
+
+#if 1
+ if (_parser->recv("MAC_ADD"))
+ {
+ char mac_addr[20];
+ _parser->read(mac_addr, 14);
+ _console->printf("\r\nMAC Addr is %s\r\n", mac_addr);
+
+ }
+#else
+ long int mac_addr;
+ if(_parser->recv("MAC_ADDR %lx OK", &mac_addr) /* && _parser->recv("OK") */)
+ {
+ _console->printf("\r\nATCmdParser: MAC Address : %lx", mac_addr);
+ _console->printf("\r\nATCmdParser: Retrieving MAC Address success");
+ } else {
+ _console->printf("\r\nATCmdParser: Retrieving FW version failed");
+ return -1;
+ }
#endif
-
- printf(" Close socket & disconnect ... \r\n");
- sock.close();
- network_interface->disconnect();
- printf(" End \r\n");
+ _console->printf("\r\nDone\r\n");
}
--- a/mbed_app.json Sun Jun 13 04:11:43 2021 +0000
+++ b/mbed_app.json Wed Jun 16 11:05:30 2021 +0000
@@ -3,83 +3,22 @@
"*": {
"platform.stdio-baud-rate" : 115200,
"platform.stdio-convert-newlines" : true,
- "platform.heap-stats-enabled" : 1,
- "nsapi.default-wifi-security" : "WPA_WPA2",
- "nsapi.default-wifi-ssid" : "\"SSID\"",
- "nsapi.default-wifi-password" : "\"Password\""
- },
- "NUMAKER_PFM_NANO130": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "D1",
- "esp8266.rx" : "D0",
- "esp8266.rts" : "PB_6",
- "esp8266.cts" : "PB_7",
- "esp8266.rst" : "D2",
- "esp8266.provide-default" : true
+ "platform.heap-stats-enabled" : 1
},
- "NUMAKER_PFM_NUC472": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "PD_15",
- "esp8266.rx" : "PF_0",
- "esp8266.rts" : "PD_14",
- "esp8266.cts" : "PD_13",
- "esp8266.rst" : "D2",
- "esp8266.provide-default" : true
- },
- "NUMAKER_PFM_M453": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "A3",
- "esp8266.rx" : "A2",
- "esp8266.rts" : "A5",
- "esp8266.cts" : "A4",
- "esp8266.rst" : "D2",
- "esp8266.provide-default" : true
+ "NUMAKER_IOT_M487": {
+ "target.components_add" : ["SPIF"],
+ "spif-driver.SPI_MOSI" : "PC_0",
+ "spif-driver.SPI_MISO" : "PC_1",
+ "spif-driver.SPI_CLK" : "PC_2",
+ "spif-driver.SPI_CS" : "PC_3"
},
"NUMAKER_PFM_M487": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "D1",
- "esp8266.rx" : "D0",
- "esp8266.rts" : "A2",
- "esp8266.cts" : "A3",
- "esp8266.rst" : "D2",
- "esp8266.provide-default" : true
- },
- "NUMAKER_IOT_M487": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "PH_8",
- "esp8266.rx" : "PH_9",
- "esp8266.rts" : "A2",
- "esp8266.cts" : "A3",
- "esp8266.rst" : "PH_3",
- "esp8266.provide-default" : true
- },
- "NU_PFM_M2351_NPSA_NS": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "PD_1",
- "esp8266.rx" : "PD_0",
- "esp8266.rts" : "PD_3",
- "esp8266.cts" : "PD_2",
- "esp8266.rst" : "NC",
- "esp8266.pwr" : "PD_7",
- "esp8266.provide-default" : true
- },
- "NU_M2354_NPSA_NS": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "PC_7",
- "esp8266.rx" : "PC_6",
- "esp8266.rts" : "PE_13",
- "esp8266.cts" : "PC_8",
- "esp8266.rst" : "PC_13",
- "esp8266.provide-default" : true
- },
- "NUMAKER_IOT_M263A": {
- "target.network-default-interface-type" : "WIFI",
- "esp8266.tx" : "PC_7",
- "esp8266.rx" : "PC_6",
- "esp8266.rts" : "PE_13",
- "esp8266.cts" : "PC_8",
- "esp8266.rst" : "PE_12",
- "esp8266.provide-default" : true
+ "target.components_add" : ["SPIF"],
+ "spif-driver.SPI_MOSI" : "PC_0",
+ "spif-driver.SPI_MISO" : "PC_1",
+ "spif-driver.SPI_CLK" : "PC_2",
+ "spif-driver.SPI_CS" : "PC_3"
}
+
}
}