Diff: main.cpp

Revision:

13:20ede19a43cd

Parent:

12:4f0489448955

--- a/main.cpp	Sat Oct 03 10:54:52 2015 +0000
+++ b/main.cpp	Mon Jun 04 09:26:45 2018 +0000
@@ -1,11 +1,20 @@
+//Test of cheap 13.56 Mhz RFID-RC522 module from eBay
+//This code is based on Martin Olejar's MFRC522 library. Minimal changes
+//Adapted for Nucleo STM32 F401RE. Should work on other Nucleos too
+
+//----------------------------------------
+
 #include "mbed.h"
 #include "DHT.h"
 #include "MQTTEthernet.h"
 #include "MQTTClient.h"
+#include <sstream>
+#include <string>
 #define ECHO_SERVER_PORT   7
- 
+
+Serial out(USBTX,USBRX);
 int arrivedcount = 0;
- 
+
 void messageArrived(MQTT::MessageData& md)
 {
     MQTT::Message &message = md.message;
@@ -14,64 +23,134 @@
     ++arrivedcount;
 }
 
-void baud(int baudrate) {
+void baud(int baudrate)
+{
     Serial s(USBTX, USBRX);
     s.baud(baudrate);
 }
 
-int main (void)
+
+    char* store_buf;
+    unsigned long lastConnectionTime = 0; 
+  const unsigned long postingInterval = 20L * 1000L;
+  
+  
+int main(void)
 {
     DHT sensor(D4, DHT11);
-    baud(115200);
-    printf("Wait a second...\r\n");
-    char* topic = "openhab/parents/command";
+    printf("starting...\n");
+
     MQTTEthernet ipstack = MQTTEthernet();
-    
-    MQTT::Client<MQTTEthernet, Countdown> client = MQTT::Client<MQTTEthernet, Countdown>(ipstack);
-    
-    char* hostname = "192.168.1.99";
-    int port = 1883;
-    
-    int rc = ipstack.connect(hostname, port);
-    if (rc != 0)
-        printf("rc from TCP connect is %d\n", rc);
-        
-    printf("Topic: %s\r\n",topic);
-    
-    MQTTPacket_connectData data = MQTTPacket_connectData_initializer;       
-    data.MQTTVersion = 3;
-    data.clientID.cstring = "parents";
+  //printf("setting up mqtt ethernet");
+
+    while (true) {
+              if(store_buf[0]=='\0') {
+            MQTT::Client<MQTTEthernet, Countdown> client = MQTT::Client<MQTTEthernet, Countdown>(ipstack);
+
+            char* hostname = "mqtt.thingspeak.com";
+            int port = 1883;
+            
+            
+  
+            int rc = ipstack.connect(hostname, port);
+
+            out.printf("rc from TCP connect is %d\n", rc);
+
+            if (rc != 0)
+                out.printf("rc from TCP connect is %d\n", rc);
 
-    if ((rc = client.connect(data)) != 0)
-        printf("rc from MQTT connect is %d\n", rc);
- 
-    if ((rc = client.subscribe(topic, MQTT::QOS1, messageArrived)) != 0)
-        printf("rc from MQTT subscribe is %d\n", rc); 
-        
-    MQTT::Message message;
+            char MQTTClientID[30];
+
+            MQTTPacket_connectData data = MQTTPacket_connectData_initializer;
+            data.MQTTVersion = 3;
+            sprintf(MQTTClientID,"WIZwikiW7500mqttclient%d",rand()%1000);
+            data.clientID.cstring = MQTTClientID;
+             data.username.cstring = "tsmqtttuser";
+            data.password.cstring = "tsmqtttpasswrd"; 
+            
+            data.writeapikey.cstring = "tsmqtttpasswrd"; 
+            data.channelid.cstring = "tsmqtttpasswrd"; 
+
+
+
+            if ((rc = client.connect(data)) != 0)
+                printf("rc from MQTT connect is %d\n", rc);
+
+            MQTT::Message message;
+
     char buf[100];
     int error = 0;
     float hum = 0.0f, temp = 0.0f;
-    while (true) 
+    char i = 0;
+    while (true)
     {
+        if(i > 100) i = 0;
         error = sensor.readData();
         if (0 == error) {
             hum = sensor.ReadHumidity();
             temp = sensor.ReadTemperature(CELCIUS);
-        }
-        sprintf(buf, "%3.1f", hum);
+                         }
         message.qos = MQTT::QOS0;
         message.retained = false;
         message.dup = false;
+        
+ f (millis() - lastConnectionTime > postingInterval) 
+  {
+        
+        
+        
+        sprintf(buf, "%3.1f", hum);
         message.payload = (void*)buf;
         message.payloadlen = strlen(buf);
-        rc = client.publish("openhab/parents/humidity", message);
+        rc = client.publish("/wiznet/humidity17",message);
+        printf("publish humidity data %s\r\n",(char*)message.payload);
+        
         sprintf(buf, "%3.1f", temp);
         message.payload = (void*)buf;
         message.payloadlen = strlen(buf);
-        rc = client.publish("openhab/parents/temperature", message);
+        rc = client.publish("/wiznet/temperature17", message);
+        printf("publish temperature data %s\r\n",(char*)message.payload);
+        
         
-        client.yield(60000);
+  lastConnectionTime = millis();    
+               /* 
+if (millis() - lastConnectionTime > postingInterval) 
+  {
+   
+  // do publish operation
+ 
+  
+   Use this function  to publish to a single field directly.  
+   
+  void mqttpublish() {
+  
+  float t = dht.readTemperature(true); // Read temperature from DHT sensor.
+
+  String data = String(t, DEC);
+  int length = data.length();
+  char msgBuffer[length];
+  data.toCharArray(msgBuffer,length+1);
+  printf(msgBuffer);
+  
+  // Create a topic string and publish data to ThingSpeak channel feed. 
+  String topicString ="channels/" + String( channelID ) + "/publish/"+String(writeAPIKey);
+  length=topicString.length();
+  char topicBuffer[length];
+  topicString.toCharArray(topicBuffer,length+1);
+ 
+  mqttClient.publish( topicBuffer, msgBuffer );
+
+  lastConnectionTime = millis();
+}
+  
+  }
+  
+  */
+                                 
+                wait_ms(3000);
+                          
+       }
+            }
+
     }
-}
-
+}
\ No newline at end of file