Diff: main.cpp

Revision:

0:a8090b59eb05

Child:

1:ea0f7b1c5daf

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Nov 04 16:49:27 2012 +0000
@@ -0,0 +1,184 @@
+#include "mbed.h"
+#include "GLCD.h"
+
+#include "Bg_16bpp_t.h"
+#include "Bg_16bpp_l.h"
+#include "Bg_16bpp_r.h"
+#include "Bg_16bpp_b.h"
+#include "ARM_Ani_16bpp.h"
+
+//Host PC Baudrate (Virtual Com Port on USB)
+#define D_BAUDRATE            9600
+//#define D_BAUDRATE            57600
+
+//extern unsigned short driverCode;
+
+#define LANDTIGER 1
+
+// Variables for Heartbeat and Status monitoring
+#ifdef LANDTIGER
+DigitalOut myled1(P2_0);
+DigitalOut myled2(P2_1);
+DigitalOut myled3(P2_2);
+DigitalOut myled4(P2_3);
+DigitalOut myled5(P2_4);
+DigitalOut myled6(P2_5);
+DigitalOut myled7(P2_6);
+DigitalOut myled8(P2_7);
+
+
+//DigitalOut heartbeatLED(LED4);
+DigitalOut heartbeatLED(P3_26);      //SD_PWR, active low
+//DigitalOut USB_Host_Power(P1_19);   //USB Power, active low
+
+// Need this override function on non-mbed hardware to provide the MAC address.
+//
+// The mbed Ethernet library sets the MAC address by calling a weak function
+// extern "C" void mbed_mac_address(char * mac) to copy in a 6 Byte (12 character) MAC address.
+// This function performs a semihosting request to the mbed interface to get the serial number,
+// which contains a MAC address unique to every mbed device.
+// If you are using the eth library on your own board (i.e. not an mbed board),
+// you should implement your own extern "C" void mbed_mac_address(char * mac) function
+// to overwrite the existing one and avoid a call to the interface (which doesnt exist).
+
+
+extern "C" void mbed_mac_address(char * mac) {
+
+//mbed module clone
+//  mac[0] = 0x00;  
+//  mac[1] = 0x02;  
+//  mac[2] = 0xF7;  
+//  mac[3] = 0xF0;  
+//  mac[4] = 0x56;  
+//  mac[5] = 0x90;            
+
+//KPN Experia
+  mac[0] = 0x00;  
+  mac[1] = 0x01;  
+  mac[2] = 0xE3;  
+  mac[3] = 0x55;  
+  mac[4] = 0xA1;  
+  mac[5] = 0xC7;           
+  
+};
+
+#else
+DigitalOut myled1(LED1);
+DigitalOut myled2(LED2);
+DigitalOut myled3(LED3);
+DigitalOut heartbeatLED(LED4);
+#endif
+
+
+// Host PC Communication channels
+Serial pc(USBTX, USBRX); // tx, rx
+
+// Variables for Heartbeat and Status monitoring
+Ticker heartbeat;
+bool heartbeatflag=false;
+
+Ticker LCD_Ani;
+
+void clear_screen() {
+//ANSI Terminal Commands
+    pc.printf("\x1B[2J");
+    pc.printf("\x1B[H");
+}
+
+void init_interfaces() {
+    // Init Host PC communication, default is 9600
+    pc.baud(D_BAUDRATE);
+      
+    //Done, Tell me about it
+//    show_LEDS();
+}
+      
+
+// Heartbeat monitor
+void pulse() {
+  heartbeatLED = !heartbeatLED;
+
+#ifdef LANDTIGER
+//  myled1 = heartbeatLED;
+//  myled2 = heartbeatLED;
+//  myled3 = heartbeatLED;
+//  myled4 = heartbeatLED;      
+
+//  myled5 = !heartbeatLED;
+//  myled6 = !heartbeatLED;
+//  myled7 = !heartbeatLED;
+//  myled8 = !heartbeatLED;      
+
+#endif  
+  
+}
+
+void heartbeat_start() {
+  heartbeatLED = 1;
+  heartbeat.attach(&pulse, 0.5);
+}
+
+void heartbeat_stop() {
+  heartbeat.detach();
+}
+
+
+// LCD Animation
+void LCD_pulse() {
+  static int pic =  0;
+  
+  if (pic++ > 8) pic = 0;
+  GLCD_Bmp (99, 99, 120, 45, (unsigned char*) &ARM_Ani_16bpp[pic*(120*45*2)]);
+}
+
+void LCD_Ani_start() {
+//  LCD_Ani.attach(&LCD_pulse, 0.05);
+  LCD_Ani.attach(&LCD_pulse, 0.25);  
+}
+
+void LCD_Ani_stop() {
+  LCD_Ani.detach();
+}
+
+
+
+int main() {
+    init_interfaces();
+    
+    heartbeat_start();
+
+    clear_screen(); 
+  
+    pc.printf("Hello World!\n\r");
+
+    GLCD_Init();
+    GLCD_Clear(White);
+//    GLCD_Clear(Blue);    
+//    GLCD_Bmp(  0,   0, 320,  69, (unsigned char*) Bg_16bpp_t+70);
+//    GLCD_Bmp(  0,  69,   4, 102, (unsigned char*) Bg_16bpp_l+70);
+//    GLCD_Bmp(316,  69,   4, 102, (unsigned char*) Bg_16bpp_r+70);
+//    GLCD_Bmp(  0, 171, 320,  69, (unsigned char*) Bg_16bpp_b+70);
+//    GLCD_Bmp(  0, 171, 320,  69, (unsigned char*) Bg_16bpp_t+70);    
+
+    GLCD_SetTextColor   (Red);
+    GLCD_SetBackColor   (White);
+    GLCD_DisplayString (0, 0, (unsigned char*) "Hi Willem");
+
+    LCD_Ani_start();
+
+    GLCD_drawRect (20, 20, 100, 100);
+
+    GLCD_SetTextColor   (Green);    
+    GLCD_drawHLine (10, 10, 50);
+    GLCD_drawVLine (30, 30, 50);
+    
+    pc.printf("LCD Controller ID = 0x%04X\n\r", GLCD_DriverCode());    
+    
+    while(1) {
+      pc.printf("+"); 
+            
+      wait(0.1);
+    };
+    
+    pc.printf("Bye World!\n\r");   
+}