Diff: st7735.h

Revision:

0:4db361f2e6d5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/st7735.h	Sun Jan 04 13:25:59 2015 +0000
@@ -0,0 +1,212 @@
+/**
+  ******************************************************************************
+  * @file    st7735.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    22-April-2014
+  * @brief   This file contains all the functions prototypes for the st7735.c
+  *          driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __ST7735_H
+#define __ST7735_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+#include "lcd.h"
+
+/** @addtogroup BSP
+  * @{
+  */ 
+
+/** @addtogroup Components
+  * @{
+  */ 
+  
+/** @addtogroup ST7735
+  * @{
+  */
+
+/** @defgroup ST7735_Exported_Types
+  * @{
+  */
+   
+/**
+  * @}
+  */ 
+
+/** @defgroup ST7735_Exported_Constants
+  * @{
+  */
+      
+/** 
+  * @brief  ST7735 Size  
+  */  
+#define  ST7735_LCD_PIXEL_WIDTH    ((uint16_t)128)
+#define  ST7735_LCD_PIXEL_HEIGHT   ((uint16_t)160)
+
+/** 
+  * @brief  ST7735 Registers  
+  */ 
+#define  LCD_REG_0               0x00 /* No Operation: NOP */
+#define  LCD_REG_1               0x01 /* Software reset: SWRESET */
+#define  LCD_REG_4               0x04 /* Read Display ID: RDDID */
+#define  LCD_REG_9               0x09 /* Read Display Statu: RDDST */
+#define  LCD_REG_10              0x0A /* Read Display Power: RDDPM */
+#define  LCD_REG_11              0x0B /* Read Display: RDDMADCTL */
+#define  LCD_REG_12              0x0C /* Read Display Pixel: RDDCOLMOD */  
+#define  LCD_REG_13              0x0D /* Read Display Image: RDDIM */
+#define  LCD_REG_14              0x0E /* Read Display Signal: RDDSM */                           
+#define  LCD_REG_16              0x10 /* Sleep in & booster off: SLPIN */ 
+#define  LCD_REG_17              0x11 /* Sleep out & booster on: SLPOUT */
+#define  LCD_REG_18              0x12 /* Partial mode on: PTLON */ 
+#define  LCD_REG_19              0x13 /* Partial off (Normal): NORON */
+#define  LCD_REG_32              0x20 /* Display inversion off: INVOFF */
+#define  LCD_REG_33              0x21 /* Display inversion on: INVON */
+#define  LCD_REG_38              0x26 /* Gamma curve select: GAMSET */
+#define  LCD_REG_40              0x28 /* Display off: DISPOFF */
+#define  LCD_REG_41              0x29 /* Display on: DISPON */
+#define  LCD_REG_42              0x2A /* Column address set: CASET */ 
+#define  LCD_REG_43              0x2B /* Row address set: RASET */
+#define  LCD_REG_44              0x2C /* Memory write: RAMWR */  
+#define  LCD_REG_45              0x2D /* LUT for 4k,65k,262k color: RGBSET */
+#define  LCD_REG_46              0x2E /* Memory read: RAMRD*/
+#define  LCD_REG_48              0x30 /* Partial start/end address set: PTLAR */ 
+#define  LCD_REG_52              0x34 /* Tearing effect line off: TEOFF */ 
+#define  LCD_REG_53              0x35 /* Tearing effect mode set & on: TEON */ 
+#define  LCD_REG_54              0x36 /* Memory data access control: MADCTL */ 
+#define  LCD_REG_56              0x38 /* Idle mode off: IDMOFF */ 
+#define  LCD_REG_57              0x39 /* Idle mode on: IDMON */ 
+#define  LCD_REG_58              0x3A /* Interface pixel format: COLMOD */
+#define  LCD_REG_177             0xB1 /* In normal mode (Full colors): FRMCTR1 */
+#define  LCD_REG_178             0xB2 /* In Idle mode (8-colors): FRMCTR2 */   
+#define  LCD_REG_179             0xB3 /* In partial mode + Full colors: FRMCTR3 */ 
+#define  LCD_REG_180             0xB4 /* Display inversion control: INVCTR */
+#define  LCD_REG_192             0xC0 /* Power control setting: PWCTR1 */ 
+#define  LCD_REG_193             0xC1 /* Power control setting: PWCTR2 */ 
+#define  LCD_REG_194             0xC2 /* In normal mode (Full colors): PWCTR3 */
+#define  LCD_REG_195             0xC3 /* In Idle mode (8-colors): PWCTR4 */ 
+#define  LCD_REG_196             0xC4 /* In partial mode + Full colors: PWCTR5 */ 
+#define  LCD_REG_197             0xC5 /* VCOM control 1: VMCTR1 */ 
+#define  LCD_REG_199             0xC7 /* Set VCOM offset control: VMOFCTR */ 
+#define  LCD_REG_209             0xD1 /* Set LCM version code: WRID2 */ 
+#define  LCD_REG_210             0xD2 /* Customer Project code: WRID3 */ 
+#define  LCD_REG_217             0xD9 /* NVM control status: NVCTR1 */
+#define  LCD_REG_218             0xDA /* Read ID1: RDID1 */ 
+#define  LCD_REG_219             0xDB /* Read ID2: RDID2 */ 
+#define  LCD_REG_220             0xDC /* Read ID3: RDID3 */ 
+#define  LCD_REG_222             0xDE /* NVM Read Command: NVCTR2 */ 
+#define  LCD_REG_223             0xDF /* NVM Write Command: NVCTR3 */
+#define  LCD_REG_224             0xE0 /* Set Gamma adjustment (+ polarity): GAMCTRP1 */                          
+#define  LCD_REG_225             0xE1 /* Set Gamma adjustment (- polarity): GAMCTRN1 */ 
+
+/** 
+  * @brief  LCD Lines depending on the chosen fonts.  
+  */
+#define LCD_LINE_0               LINE(0)
+#define LCD_LINE_1               LINE(1)
+#define LCD_LINE_2               LINE(2)
+#define LCD_LINE_3               LINE(3)
+#define LCD_LINE_4               LINE(4)
+#define LCD_LINE_5               LINE(5)
+#define LCD_LINE_6               LINE(6)
+#define LCD_LINE_7               LINE(7)
+#define LCD_LINE_8               LINE(8)
+#define LCD_LINE_9               LINE(9)
+#define LCD_LINE_10              LINE(10)
+#define LCD_LINE_11              LINE(11)
+#define LCD_LINE_12              LINE(12)
+#define LCD_LINE_13              LINE(13)
+#define LCD_LINE_14              LINE(14)
+#define LCD_LINE_15              LINE(15)
+#define LCD_LINE_16              LINE(16)
+#define LCD_LINE_17              LINE(17)
+#define LCD_LINE_18              LINE(18)
+#define LCD_LINE_19              LINE(19) 
+   
+/**
+  * @}
+  */
+
+/** @defgroup ADAFRUIT_SPI_LCD_Exported_Functions
+  * @{
+  */ 
+void     st7735_Init(void);
+uint16_t st7735_ReadID(void);
+
+void     st7735_DisplayOn(void);
+void     st7735_DisplayOff(void);
+void     st7735_SetCursor(uint16_t Xpos, uint16_t Ypos);
+void     st7735_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGB_Code);
+void     st7735_WriteReg(uint8_t LCDReg, uint8_t LCDRegValue);
+uint8_t  st7735_ReadReg(uint8_t LCDReg);
+
+void     st7735_DrawHLine(uint16_t RGB_Code, uint16_t Xpos, uint16_t Ypos, uint16_t Length);
+void     st7735_DrawVLine(uint16_t RGB_Code, uint16_t Xpos, uint16_t Ypos, uint16_t Length);
+
+uint16_t st7735_GetLcdPixelWidth(void);
+uint16_t st7735_GetLcdPixelHeight(void);
+
+/* LCD driver structure */
+extern LCD_DrvTypeDef   st7735_drv;
+
+/* LCD IO functions */
+void     LCD_IO_Init(void);
+void     LCD_IO_WriteData(uint8_t Data);
+void     LCD_IO_WriteReg(uint8_t Reg);
+void     LCD_Delay(uint32_t delay);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ST7735_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/