mbed TLS Build
Diff: include/mbedtls/rsa.h
- Revision:
- 0:cdf462088d13
diff -r 000000000000 -r cdf462088d13 include/mbedtls/rsa.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/include/mbedtls/rsa.h Thu Jan 05 00:18:44 2017 +0000 @@ -0,0 +1,652 @@ +/** + * \file rsa.h + * + * \brief The RSA public-key cryptosystem + * + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_RSA_H +#define MBEDTLS_RSA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "bignum.h" +#include "md.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +/* + * RSA Error codes + */ +#define MBEDTLS_ERR_RSA_BAD_INPUT_DATA -0x4080 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_RSA_INVALID_PADDING -0x4100 /**< Input data contains invalid padding and is rejected. */ +#define MBEDTLS_ERR_RSA_KEY_GEN_FAILED -0x4180 /**< Something failed during generation of a key. */ +#define MBEDTLS_ERR_RSA_KEY_CHECK_FAILED -0x4200 /**< Key failed to pass the library's validity check. */ +#define MBEDTLS_ERR_RSA_PUBLIC_FAILED -0x4280 /**< The public key operation failed. */ +#define MBEDTLS_ERR_RSA_PRIVATE_FAILED -0x4300 /**< The private key operation failed. */ +#define MBEDTLS_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */ +#define MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */ +#define MBEDTLS_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */ + +/* + * RSA constants + */ +#define MBEDTLS_RSA_PUBLIC 0 +#define MBEDTLS_RSA_PRIVATE 1 + +#define MBEDTLS_RSA_PKCS_V15 0 +#define MBEDTLS_RSA_PKCS_V21 1 + +#define MBEDTLS_RSA_SIGN 1 +#define MBEDTLS_RSA_CRYPT 2 + +#define MBEDTLS_RSA_SALT_LEN_ANY -1 + +/* + * The above constants may be used even if the RSA module is compile out, + * eg for alternative (PKCS#11) RSA implemenations in the PK layers. + */ +#if defined(MBEDTLS_RSA_C) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief RSA context structure + */ +typedef struct +{ + int ver; /*!< always 0 */ + size_t len; /*!< size(N) in chars */ + + mbedtls_mpi N; /*!< public modulus */ + mbedtls_mpi E; /*!< public exponent */ + + mbedtls_mpi D; /*!< private exponent */ + mbedtls_mpi P; /*!< 1st prime factor */ + mbedtls_mpi Q; /*!< 2nd prime factor */ + mbedtls_mpi DP; /*!< D % (P - 1) */ + mbedtls_mpi DQ; /*!< D % (Q - 1) */ + mbedtls_mpi QP; /*!< 1 / (Q % P) */ + + mbedtls_mpi RN; /*!< cached R^2 mod N */ + mbedtls_mpi RP; /*!< cached R^2 mod P */ + mbedtls_mpi RQ; /*!< cached R^2 mod Q */ + + mbedtls_mpi Vi; /*!< cached blinding value */ + mbedtls_mpi Vf; /*!< cached un-blinding value */ + + int padding; /*!< MBEDTLS_RSA_PKCS_V15 for 1.5 padding and + MBEDTLS_RSA_PKCS_v21 for OAEP/PSS */ + int hash_id; /*!< Hash identifier of mbedtls_md_type_t as + specified in the mbedtls_md.h header file + for the EME-OAEP and EMSA-PSS + encoding */ +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; /*!< Thread-safety mutex */ +#endif +} +mbedtls_rsa_context; + +/** + * \brief Initialize an RSA context + * + * Note: Set padding to MBEDTLS_RSA_PKCS_V21 for the RSAES-OAEP + * encryption scheme and the RSASSA-PSS signature scheme. + * + * \param ctx RSA context to be initialized + * \param padding MBEDTLS_RSA_PKCS_V15 or MBEDTLS_RSA_PKCS_V21 + * \param hash_id MBEDTLS_RSA_PKCS_V21 hash identifier + * + * \note The hash_id parameter is actually ignored + * when using MBEDTLS_RSA_PKCS_V15 padding. + * + * \note Choice of padding mode is strictly enforced for private key + * operations, since there might be security concerns in + * mixing padding modes. For public key operations it's merely + * a default value, which can be overriden by calling specific + * rsa_rsaes_xxx or rsa_rsassa_xxx functions. + * + * \note The chosen hash is always used for OEAP encryption. + * For PSS signatures, it's always used for making signatures, + * but can be overriden (and always is, if set to + * MBEDTLS_MD_NONE) for verifying them. + */ +void mbedtls_rsa_init( mbedtls_rsa_context *ctx, + int padding, + int hash_id); + +/** + * \brief Set padding for an already initialized RSA context + * See \c mbedtls_rsa_init() for details. + * + * \param ctx RSA context to be set + * \param padding MBEDTLS_RSA_PKCS_V15 or MBEDTLS_RSA_PKCS_V21 + * \param hash_id MBEDTLS_RSA_PKCS_V21 hash identifier + */ +void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding, int hash_id); + +/** + * \brief Generate an RSA keypair + * + * \param ctx RSA context that will hold the key + * \param f_rng RNG function + * \param p_rng RNG parameter + * \param nbits size of the public key in bits + * \param exponent public exponent (e.g., 65537) + * + * \note mbedtls_rsa_init() must be called beforehand to setup + * the RSA context. + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + */ +int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + unsigned int nbits, int exponent ); + +/** + * \brief Check a public RSA key + * + * \param ctx RSA context to be checked + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + */ +int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx ); + +/** + * \brief Check a private RSA key + * + * \param ctx RSA context to be checked + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + */ +int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx ); + +/** + * \brief Check a public-private RSA key pair. + * Check each of the contexts, and make sure they match. + * + * \param pub RSA context holding the public key + * \param prv RSA context holding the private key + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + */ +int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub, const mbedtls_rsa_context *prv ); + +/** + * \brief Do an RSA public key operation + * + * \param ctx RSA context + * \param input input buffer + * \param output output buffer + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note This function does NOT take care of message + * padding. Also, be sure to set input[0] = 0 or ensure that + * input is smaller than N. + * + * \note The input and output buffers must be large + * enough (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_public( mbedtls_rsa_context *ctx, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Do an RSA private key operation + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for blinding) + * \param p_rng RNG parameter + * \param input input buffer + * \param output output buffer + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The input and output buffers must be large + * enough (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_private( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Generic wrapper to perform a PKCS#1 encryption using the + * mode from the context. Add the message padding, then do an + * RSA operation. + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding + * and MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param ilen contains the plaintext length + * \param input buffer holding the data to be encrypted + * \param output buffer that will hold the ciphertext + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Perform a PKCS#1 v1.5 encryption (RSAES-PKCS1-v1_5-ENCRYPT) + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for padding and MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param ilen contains the plaintext length + * \param input buffer holding the data to be encrypted + * \param output buffer that will hold the ciphertext + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Perform a PKCS#1 v2.1 OAEP encryption (RSAES-OAEP-ENCRYPT) + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding + * and MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param label buffer holding the custom label to use + * \param label_len contains the label length + * \param ilen contains the plaintext length + * \param input buffer holding the data to be encrypted + * \param output buffer that will hold the ciphertext + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + const unsigned char *label, size_t label_len, + size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Generic wrapper to perform a PKCS#1 decryption using the + * mode from the context. Do an RSA operation, then remove + * the message padding + * + * \param ctx RSA context + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param olen will contain the plaintext length + * \param input buffer holding the encrypted data + * \param output buffer that will hold the plaintext + * \param output_max_len maximum length of the output buffer + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise + * an error is thrown. + */ +int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief Perform a PKCS#1 v1.5 decryption (RSAES-PKCS1-v1_5-DECRYPT) + * + * \param ctx RSA context + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param olen will contain the plaintext length + * \param input buffer holding the encrypted data + * \param output buffer that will hold the plaintext + * \param output_max_len maximum length of the output buffer + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise + * an error is thrown. + */ +int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief Perform a PKCS#1 v2.1 OAEP decryption (RSAES-OAEP-DECRYPT) + * + * \param ctx RSA context + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param label buffer holding the custom label to use + * \param label_len contains the label length + * \param olen will contain the plaintext length + * \param input buffer holding the encrypted data + * \param output buffer that will hold the plaintext + * \param output_max_len maximum length of the output buffer + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise + * an error is thrown. + */ +int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + const unsigned char *label, size_t label_len, + size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief Generic wrapper to perform a PKCS#1 signature using the + * mode from the context. Do a private RSA operation to sign + * a message digest + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding and for + * MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer that will hold the ciphertext + * + * \return 0 if the signing operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note In case of PKCS#1 v2.1 encoding, see comments on + * \note \c mbedtls_rsa_rsassa_pss_sign() for details on md_alg and hash_id. + */ +int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Perform a PKCS#1 v1.5 signature (RSASSA-PKCS1-v1_5-SIGN) + * + * \param ctx RSA context + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer that will hold the ciphertext + * + * \return 0 if the signing operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Perform a PKCS#1 v2.1 PSS signature (RSASSA-PSS-SIGN) + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding and for + * MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer that will hold the ciphertext + * + * \return 0 if the signing operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note The hash_id in the RSA context is the one used for the + * encoding. md_alg in the function call is the type of hash + * that is encoded. According to RFC 3447 it is advised to + * keep both hashes the same. + */ +int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Generic wrapper to perform a PKCS#1 verification using the + * mode from the context. Do a public RSA operation and check + * the message digest + * + * \param ctx points to an RSA public key + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer holding the ciphertext + * + * \return 0 if the verify operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note In case of PKCS#1 v2.1 encoding, see comments on + * \c mbedtls_rsa_rsassa_pss_verify() about md_alg and hash_id. + */ +int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + const unsigned char *sig ); + +/** + * \brief Perform a PKCS#1 v1.5 verification (RSASSA-PKCS1-v1_5-VERIFY) + * + * \param ctx points to an RSA public key + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer holding the ciphertext + * + * \return 0 if the verify operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + const unsigned char *sig ); + +/** + * \brief Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY) + * (This is the "simple" version.) + * + * \param ctx points to an RSA public key + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer holding the ciphertext + * + * \return 0 if the verify operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note The hash_id in the RSA context is the one used for the + * verification. md_alg in the function call is the type of + * hash that is verified. According to RFC 3447 it is advised to + * keep both hashes the same. If hash_id in the RSA context is + * unset, the md_alg from the function call is used. + */ +int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + const unsigned char *sig ); + +/** + * \brief Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY) + * (This is the version with "full" options.) + * + * \param ctx points to an RSA public key + * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) + * \param p_rng RNG parameter + * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param mgf1_hash_id message digest used for mask generation + * \param expected_salt_len Length of the salt used in padding, use + * MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length + * \param sig buffer holding the ciphertext + * + * \return 0 if the verify operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note The hash_id in the RSA context is ignored. + */ +int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + mbedtls_md_type_t mgf1_hash_id, + int expected_salt_len, + const unsigned char *sig ); + +/** + * \brief Copy the components of an RSA context + * + * \param dst Destination context + * \param src Source context + * + * \return 0 on success, + * MBEDTLS_ERR_MPI_ALLOC_FAILED on memory allocation failure + */ +int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src ); + +/** + * \brief Free the components of an RSA key + * + * \param ctx RSA Context to free + */ +void mbedtls_rsa_free( mbedtls_rsa_context *ctx ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_rsa_self_test( int verbose ); + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_RSA_C */ + +#endif /* rsa.h */