mbedtls-slave-prot-prod - mbed TLS Build

Users » williequesada » Code » mbedtls-slave-prot-prod

mbed TLS Build

doxygen/mbedtls.doxyfile@0:cdf462088d13, 2017-01-05 (annotated)

Committer:: markrad
Date:: Thu Jan 05 00:18:44 2017 +0000
Revision:: 0:cdf462088d13

Initial commit

Who changed what in which revision?

User	Revision	Line number	New contents of line
markrad	0:cdf462088d13	1	# Doxyfile 1.8.4
markrad	0:cdf462088d13	2
markrad	0:cdf462088d13	3	# This file describes the settings to be used by the documentation system
markrad	0:cdf462088d13	4	# doxygen (www.doxygen.org) for a project.
markrad	0:cdf462088d13	5	#
markrad	0:cdf462088d13	6	# All text after a double hash (##) is considered a comment and is placed
markrad	0:cdf462088d13	7	# in front of the TAG it is preceding .
markrad	0:cdf462088d13	8	# All text after a hash (#) is considered a comment and will be ignored.
markrad	0:cdf462088d13	9	# The format is:
markrad	0:cdf462088d13	10	# TAG = value [value, ...]
markrad	0:cdf462088d13	11	# For lists items can also be appended using:
markrad	0:cdf462088d13	12	# TAG += value [value, ...]
markrad	0:cdf462088d13	13	# Values that contain spaces should be placed between quotes (" ").
markrad	0:cdf462088d13	14
markrad	0:cdf462088d13	15	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	16	# Project related configuration options
markrad	0:cdf462088d13	17	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	18
markrad	0:cdf462088d13	19	# This tag specifies the encoding used for all characters in the config file
markrad	0:cdf462088d13	20	# that follow. The default is UTF-8 which is also the encoding used for all
markrad	0:cdf462088d13	21	# text before the first occurrence of this tag. Doxygen uses libiconv (or the
markrad	0:cdf462088d13	22	# iconv built into libc) for the transcoding. See
markrad	0:cdf462088d13	23	# http://www.gnu.org/software/libiconv for the list of possible encodings.
markrad	0:cdf462088d13	24
markrad	0:cdf462088d13	25	DOXYFILE_ENCODING = UTF-8
markrad	0:cdf462088d13	26
markrad	0:cdf462088d13	27	# The PROJECT_NAME tag is a single word (or sequence of words) that should
markrad	0:cdf462088d13	28	# identify the project. Note that if you do not use Doxywizard you need
markrad	0:cdf462088d13	29	# to put quotes around the project name if it contains spaces.
markrad	0:cdf462088d13	30
markrad	0:cdf462088d13	31	PROJECT_NAME = "mbed TLS v2.4.1"
markrad	0:cdf462088d13	32
markrad	0:cdf462088d13	33	# The PROJECT_NUMBER tag can be used to enter a project or revision number.
markrad	0:cdf462088d13	34	# This could be handy for archiving the generated documentation or
markrad	0:cdf462088d13	35	# if some version control system is used.
markrad	0:cdf462088d13	36
markrad	0:cdf462088d13	37	PROJECT_NUMBER =
markrad	0:cdf462088d13	38
markrad	0:cdf462088d13	39	# Using the PROJECT_BRIEF tag one can provide an optional one line description
markrad	0:cdf462088d13	40	# for a project that appears at the top of each page and should give viewer
markrad	0:cdf462088d13	41	# a quick idea about the purpose of the project. Keep the description short.
markrad	0:cdf462088d13	42
markrad	0:cdf462088d13	43	PROJECT_BRIEF =
markrad	0:cdf462088d13	44
markrad	0:cdf462088d13	45	# With the PROJECT_LOGO tag one can specify an logo or icon that is
markrad	0:cdf462088d13	46	# included in the documentation. The maximum height of the logo should not
markrad	0:cdf462088d13	47	# exceed 55 pixels and the maximum width should not exceed 200 pixels.
markrad	0:cdf462088d13	48	# Doxygen will copy the logo to the output directory.
markrad	0:cdf462088d13	49
markrad	0:cdf462088d13	50	PROJECT_LOGO =
markrad	0:cdf462088d13	51
markrad	0:cdf462088d13	52	# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
markrad	0:cdf462088d13	53	# base path where the generated documentation will be put.
markrad	0:cdf462088d13	54	# If a relative path is entered, it will be relative to the location
markrad	0:cdf462088d13	55	# where doxygen was started. If left blank the current directory will be used.
markrad	0:cdf462088d13	56
markrad	0:cdf462088d13	57	OUTPUT_DIRECTORY = apidoc/
markrad	0:cdf462088d13	58
markrad	0:cdf462088d13	59	# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
markrad	0:cdf462088d13	60	# 4096 sub-directories (in 2 levels) under the output directory of each output
markrad	0:cdf462088d13	61	# format and will distribute the generated files over these directories.
markrad	0:cdf462088d13	62	# Enabling this option can be useful when feeding doxygen a huge amount of
markrad	0:cdf462088d13	63	# source files, where putting all generated files in the same directory would
markrad	0:cdf462088d13	64	# otherwise cause performance problems for the file system.
markrad	0:cdf462088d13	65
markrad	0:cdf462088d13	66	CREATE_SUBDIRS = NO
markrad	0:cdf462088d13	67
markrad	0:cdf462088d13	68	# The OUTPUT_LANGUAGE tag is used to specify the language in which all
markrad	0:cdf462088d13	69	# documentation generated by doxygen is written. Doxygen will use this
markrad	0:cdf462088d13	70	# information to generate all constant output in the proper language.
markrad	0:cdf462088d13	71	# The default language is English, other supported languages are:
markrad	0:cdf462088d13	72	# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
markrad	0:cdf462088d13	73	# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
markrad	0:cdf462088d13	74	# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
markrad	0:cdf462088d13	75	# messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,
markrad	0:cdf462088d13	76	# Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,
markrad	0:cdf462088d13	77	# Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
markrad	0:cdf462088d13	78
markrad	0:cdf462088d13	79	OUTPUT_LANGUAGE = English
markrad	0:cdf462088d13	80
markrad	0:cdf462088d13	81	# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	82	# include brief member descriptions after the members that are listed in
markrad	0:cdf462088d13	83	# the file and class documentation (similar to JavaDoc).
markrad	0:cdf462088d13	84	# Set to NO to disable this.
markrad	0:cdf462088d13	85
markrad	0:cdf462088d13	86	BRIEF_MEMBER_DESC = YES
markrad	0:cdf462088d13	87
markrad	0:cdf462088d13	88	# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
markrad	0:cdf462088d13	89	# the brief description of a member or function before the detailed description.
markrad	0:cdf462088d13	90	# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
markrad	0:cdf462088d13	91	# brief descriptions will be completely suppressed.
markrad	0:cdf462088d13	92
markrad	0:cdf462088d13	93	REPEAT_BRIEF = YES
markrad	0:cdf462088d13	94
markrad	0:cdf462088d13	95	# This tag implements a quasi-intelligent brief description abbreviator
markrad	0:cdf462088d13	96	# that is used to form the text in various listings. Each string
markrad	0:cdf462088d13	97	# in this list, if found as the leading text of the brief description, will be
markrad	0:cdf462088d13	98	# stripped from the text and the result after processing the whole list, is
markrad	0:cdf462088d13	99	# used as the annotated text. Otherwise, the brief description is used as-is.
markrad	0:cdf462088d13	100	# If left blank, the following values are used ("$name" is automatically
markrad	0:cdf462088d13	101	# replaced with the name of the entity): "The $name class" "The $name widget"
markrad	0:cdf462088d13	102	# "The $name file" "is" "provides" "specifies" "contains"
markrad	0:cdf462088d13	103	# "represents" "a" "an" "the"
markrad	0:cdf462088d13	104
markrad	0:cdf462088d13	105	ABBREVIATE_BRIEF = "The $name class" \
markrad	0:cdf462088d13	106	"The $name widget" \
markrad	0:cdf462088d13	107	"The $name file" \
markrad	0:cdf462088d13	108	is \
markrad	0:cdf462088d13	109	provides \
markrad	0:cdf462088d13	110	specifies \
markrad	0:cdf462088d13	111	contains \
markrad	0:cdf462088d13	112	represents \
markrad	0:cdf462088d13	113	a \
markrad	0:cdf462088d13	114	an \
markrad	0:cdf462088d13	115	the
markrad	0:cdf462088d13	116
markrad	0:cdf462088d13	117	# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
markrad	0:cdf462088d13	118	# Doxygen will generate a detailed section even if there is only a brief
markrad	0:cdf462088d13	119	# description.
markrad	0:cdf462088d13	120
markrad	0:cdf462088d13	121	ALWAYS_DETAILED_SEC = NO
markrad	0:cdf462088d13	122
markrad	0:cdf462088d13	123	# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
markrad	0:cdf462088d13	124	# inherited members of a class in the documentation of that class as if those
markrad	0:cdf462088d13	125	# members were ordinary class members. Constructors, destructors and assignment
markrad	0:cdf462088d13	126	# operators of the base classes will not be shown.
markrad	0:cdf462088d13	127
markrad	0:cdf462088d13	128	INLINE_INHERITED_MEMB = NO
markrad	0:cdf462088d13	129
markrad	0:cdf462088d13	130	# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
markrad	0:cdf462088d13	131	# path before files name in the file list and in the header files. If set
markrad	0:cdf462088d13	132	# to NO the shortest path that makes the file name unique will be used.
markrad	0:cdf462088d13	133
markrad	0:cdf462088d13	134	FULL_PATH_NAMES = NO
markrad	0:cdf462088d13	135
markrad	0:cdf462088d13	136	# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
markrad	0:cdf462088d13	137	# can be used to strip a user-defined part of the path. Stripping is
markrad	0:cdf462088d13	138	# only done if one of the specified strings matches the left-hand part of
markrad	0:cdf462088d13	139	# the path. The tag can be used to show relative paths in the file list.
markrad	0:cdf462088d13	140	# If left blank the directory from which doxygen is run is used as the
markrad	0:cdf462088d13	141	# path to strip. Note that you specify absolute paths here, but also
markrad	0:cdf462088d13	142	# relative paths, which will be relative from the directory where doxygen is
markrad	0:cdf462088d13	143	# started.
markrad	0:cdf462088d13	144
markrad	0:cdf462088d13	145	STRIP_FROM_PATH =
markrad	0:cdf462088d13	146
markrad	0:cdf462088d13	147	# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
markrad	0:cdf462088d13	148	# the path mentioned in the documentation of a class, which tells
markrad	0:cdf462088d13	149	# the reader which header file to include in order to use a class.
markrad	0:cdf462088d13	150	# If left blank only the name of the header file containing the class
markrad	0:cdf462088d13	151	# definition is used. Otherwise one should specify the include paths that
markrad	0:cdf462088d13	152	# are normally passed to the compiler using the -I flag.
markrad	0:cdf462088d13	153
markrad	0:cdf462088d13	154	STRIP_FROM_INC_PATH =
markrad	0:cdf462088d13	155
markrad	0:cdf462088d13	156	# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
markrad	0:cdf462088d13	157	# (but less readable) file names. This can be useful if your file system
markrad	0:cdf462088d13	158	# doesn't support long names like on DOS, Mac, or CD-ROM.
markrad	0:cdf462088d13	159
markrad	0:cdf462088d13	160	SHORT_NAMES = NO
markrad	0:cdf462088d13	161
markrad	0:cdf462088d13	162	# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
markrad	0:cdf462088d13	163	# will interpret the first line (until the first dot) of a JavaDoc-style
markrad	0:cdf462088d13	164	# comment as the brief description. If set to NO, the JavaDoc
markrad	0:cdf462088d13	165	# comments will behave just like regular Qt-style comments
markrad	0:cdf462088d13	166	# (thus requiring an explicit @brief command for a brief description.)
markrad	0:cdf462088d13	167
markrad	0:cdf462088d13	168	JAVADOC_AUTOBRIEF = YES
markrad	0:cdf462088d13	169
markrad	0:cdf462088d13	170	# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
markrad	0:cdf462088d13	171	# interpret the first line (until the first dot) of a Qt-style
markrad	0:cdf462088d13	172	# comment as the brief description. If set to NO, the comments
markrad	0:cdf462088d13	173	# will behave just like regular Qt-style comments (thus requiring
markrad	0:cdf462088d13	174	# an explicit \brief command for a brief description.)
markrad	0:cdf462088d13	175
markrad	0:cdf462088d13	176	QT_AUTOBRIEF = NO
markrad	0:cdf462088d13	177
markrad	0:cdf462088d13	178	# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
markrad	0:cdf462088d13	179	# treat a multi-line C++ special comment block (i.e. a block of //! or ///
markrad	0:cdf462088d13	180	# comments) as a brief description. This used to be the default behaviour.
markrad	0:cdf462088d13	181	# The new default is to treat a multi-line C++ comment block as a detailed
markrad	0:cdf462088d13	182	# description. Set this tag to YES if you prefer the old behaviour instead.
markrad	0:cdf462088d13	183
markrad	0:cdf462088d13	184	MULTILINE_CPP_IS_BRIEF = NO
markrad	0:cdf462088d13	185
markrad	0:cdf462088d13	186	# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
markrad	0:cdf462088d13	187	# member inherits the documentation from any documented member that it
markrad	0:cdf462088d13	188	# re-implements.
markrad	0:cdf462088d13	189
markrad	0:cdf462088d13	190	INHERIT_DOCS = YES
markrad	0:cdf462088d13	191
markrad	0:cdf462088d13	192	# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
markrad	0:cdf462088d13	193	# a new page for each member. If set to NO, the documentation of a member will
markrad	0:cdf462088d13	194	# be part of the file/class/namespace that contains it.
markrad	0:cdf462088d13	195
markrad	0:cdf462088d13	196	SEPARATE_MEMBER_PAGES = NO
markrad	0:cdf462088d13	197
markrad	0:cdf462088d13	198	# The TAB_SIZE tag can be used to set the number of spaces in a tab.
markrad	0:cdf462088d13	199	# Doxygen uses this value to replace tabs by spaces in code fragments.
markrad	0:cdf462088d13	200
markrad	0:cdf462088d13	201	TAB_SIZE = 8
markrad	0:cdf462088d13	202
markrad	0:cdf462088d13	203	# This tag can be used to specify a number of aliases that acts
markrad	0:cdf462088d13	204	# as commands in the documentation. An alias has the form "name=value".
markrad	0:cdf462088d13	205	# For example adding "sideeffect=\par Side Effects:\n" will allow you to
markrad	0:cdf462088d13	206	# put the command \sideeffect (or @sideeffect) in the documentation, which
markrad	0:cdf462088d13	207	# will result in a user-defined paragraph with heading "Side Effects:".
markrad	0:cdf462088d13	208	# You can put \n's in the value part of an alias to insert newlines.
markrad	0:cdf462088d13	209
markrad	0:cdf462088d13	210	ALIASES =
markrad	0:cdf462088d13	211
markrad	0:cdf462088d13	212	# This tag can be used to specify a number of word-keyword mappings (TCL only).
markrad	0:cdf462088d13	213	# A mapping has the form "name=value". For example adding
markrad	0:cdf462088d13	214	# "class=itcl::class" will allow you to use the command class in the
markrad	0:cdf462088d13	215	# itcl::class meaning.
markrad	0:cdf462088d13	216
markrad	0:cdf462088d13	217	TCL_SUBST =
markrad	0:cdf462088d13	218
markrad	0:cdf462088d13	219	# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
markrad	0:cdf462088d13	220	# sources only. Doxygen will then generate output that is more tailored for C.
markrad	0:cdf462088d13	221	# For instance, some of the names that are used will be different. The list
markrad	0:cdf462088d13	222	# of all members will be omitted, etc.
markrad	0:cdf462088d13	223
markrad	0:cdf462088d13	224	OPTIMIZE_OUTPUT_FOR_C = YES
markrad	0:cdf462088d13	225
markrad	0:cdf462088d13	226	# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
markrad	0:cdf462088d13	227	# sources only. Doxygen will then generate output that is more tailored for
markrad	0:cdf462088d13	228	# Java. For instance, namespaces will be presented as packages, qualified
markrad	0:cdf462088d13	229	# scopes will look different, etc.
markrad	0:cdf462088d13	230
markrad	0:cdf462088d13	231	OPTIMIZE_OUTPUT_JAVA = NO
markrad	0:cdf462088d13	232
markrad	0:cdf462088d13	233	# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
markrad	0:cdf462088d13	234	# sources only. Doxygen will then generate output that is more tailored for
markrad	0:cdf462088d13	235	# Fortran.
markrad	0:cdf462088d13	236
markrad	0:cdf462088d13	237	OPTIMIZE_FOR_FORTRAN = NO
markrad	0:cdf462088d13	238
markrad	0:cdf462088d13	239	# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
markrad	0:cdf462088d13	240	# sources. Doxygen will then generate output that is tailored for
markrad	0:cdf462088d13	241	# VHDL.
markrad	0:cdf462088d13	242
markrad	0:cdf462088d13	243	OPTIMIZE_OUTPUT_VHDL = NO
markrad	0:cdf462088d13	244
markrad	0:cdf462088d13	245	# Doxygen selects the parser to use depending on the extension of the files it
markrad	0:cdf462088d13	246	# parses. With this tag you can assign which parser to use for a given
markrad	0:cdf462088d13	247	# extension. Doxygen has a built-in mapping, but you can override or extend it
markrad	0:cdf462088d13	248	# using this tag. The format is ext=language, where ext is a file extension,
markrad	0:cdf462088d13	249	# and language is one of the parsers supported by doxygen: IDL, Java,
markrad	0:cdf462088d13	250	# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
markrad	0:cdf462088d13	251	# C++. For instance to make doxygen treat .inc files as Fortran files (default
markrad	0:cdf462088d13	252	# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
markrad	0:cdf462088d13	253	# that for custom extensions you also need to set FILE_PATTERNS otherwise the
markrad	0:cdf462088d13	254	# files are not read by doxygen.
markrad	0:cdf462088d13	255
markrad	0:cdf462088d13	256	EXTENSION_MAPPING =
markrad	0:cdf462088d13	257
markrad	0:cdf462088d13	258	# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
markrad	0:cdf462088d13	259	# comments according to the Markdown format, which allows for more readable
markrad	0:cdf462088d13	260	# documentation. See http://daringfireball.net/projects/markdown/ for details.
markrad	0:cdf462088d13	261	# The output of markdown processing is further processed by doxygen, so you
markrad	0:cdf462088d13	262	# can mix doxygen, HTML, and XML commands with Markdown formatting.
markrad	0:cdf462088d13	263	# Disable only in case of backward compatibilities issues.
markrad	0:cdf462088d13	264
markrad	0:cdf462088d13	265	MARKDOWN_SUPPORT = YES
markrad	0:cdf462088d13	266
markrad	0:cdf462088d13	267	# When enabled doxygen tries to link words that correspond to documented
markrad	0:cdf462088d13	268	# classes, or namespaces to their corresponding documentation. Such a link can
markrad	0:cdf462088d13	269	# be prevented in individual cases by by putting a % sign in front of the word
markrad	0:cdf462088d13	270	# or globally by setting AUTOLINK_SUPPORT to NO.
markrad	0:cdf462088d13	271
markrad	0:cdf462088d13	272	AUTOLINK_SUPPORT = YES
markrad	0:cdf462088d13	273
markrad	0:cdf462088d13	274	# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
markrad	0:cdf462088d13	275	# to include (a tag file for) the STL sources as input, then you should
markrad	0:cdf462088d13	276	# set this tag to YES in order to let doxygen match functions declarations and
markrad	0:cdf462088d13	277	# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
markrad	0:cdf462088d13	278	# func(std::string) {}). This also makes the inheritance and collaboration
markrad	0:cdf462088d13	279	# diagrams that involve STL classes more complete and accurate.
markrad	0:cdf462088d13	280
markrad	0:cdf462088d13	281	BUILTIN_STL_SUPPORT = NO
markrad	0:cdf462088d13	282
markrad	0:cdf462088d13	283	# If you use Microsoft's C++/CLI language, you should set this option to YES to
markrad	0:cdf462088d13	284	# enable parsing support.
markrad	0:cdf462088d13	285
markrad	0:cdf462088d13	286	CPP_CLI_SUPPORT = NO
markrad	0:cdf462088d13	287
markrad	0:cdf462088d13	288	# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
markrad	0:cdf462088d13	289	# Doxygen will parse them like normal C++ but will assume all classes use public
markrad	0:cdf462088d13	290	# instead of private inheritance when no explicit protection keyword is present.
markrad	0:cdf462088d13	291
markrad	0:cdf462088d13	292	SIP_SUPPORT = NO
markrad	0:cdf462088d13	293
markrad	0:cdf462088d13	294	# For Microsoft's IDL there are propget and propput attributes to indicate
markrad	0:cdf462088d13	295	# getter and setter methods for a property. Setting this option to YES (the
markrad	0:cdf462088d13	296	# default) will make doxygen replace the get and set methods by a property in
markrad	0:cdf462088d13	297	# the documentation. This will only work if the methods are indeed getting or
markrad	0:cdf462088d13	298	# setting a simple type. If this is not the case, or you want to show the
markrad	0:cdf462088d13	299	# methods anyway, you should set this option to NO.
markrad	0:cdf462088d13	300
markrad	0:cdf462088d13	301	IDL_PROPERTY_SUPPORT = YES
markrad	0:cdf462088d13	302
markrad	0:cdf462088d13	303	# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
markrad	0:cdf462088d13	304	# tag is set to YES, then doxygen will reuse the documentation of the first
markrad	0:cdf462088d13	305	# member in the group (if any) for the other members of the group. By default
markrad	0:cdf462088d13	306	# all members of a group must be documented explicitly.
markrad	0:cdf462088d13	307
markrad	0:cdf462088d13	308	DISTRIBUTE_GROUP_DOC = NO
markrad	0:cdf462088d13	309
markrad	0:cdf462088d13	310	# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
markrad	0:cdf462088d13	311	# the same type (for instance a group of public functions) to be put as a
markrad	0:cdf462088d13	312	# subgroup of that type (e.g. under the Public Functions section). Set it to
markrad	0:cdf462088d13	313	# NO to prevent subgrouping. Alternatively, this can be done per class using
markrad	0:cdf462088d13	314	# the \nosubgrouping command.
markrad	0:cdf462088d13	315
markrad	0:cdf462088d13	316	SUBGROUPING = YES
markrad	0:cdf462088d13	317
markrad	0:cdf462088d13	318	# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
markrad	0:cdf462088d13	319	# unions are shown inside the group in which they are included (e.g. using
markrad	0:cdf462088d13	320	# @ingroup) instead of on a separate page (for HTML and Man pages) or
markrad	0:cdf462088d13	321	# section (for LaTeX and RTF).
markrad	0:cdf462088d13	322
markrad	0:cdf462088d13	323	INLINE_GROUPED_CLASSES = NO
markrad	0:cdf462088d13	324
markrad	0:cdf462088d13	325	# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
markrad	0:cdf462088d13	326	# unions with only public data fields or simple typedef fields will be shown
markrad	0:cdf462088d13	327	# inline in the documentation of the scope in which they are defined (i.e. file,
markrad	0:cdf462088d13	328	# namespace, or group documentation), provided this scope is documented. If set
markrad	0:cdf462088d13	329	# to NO (the default), structs, classes, and unions are shown on a separate
markrad	0:cdf462088d13	330	# page (for HTML and Man pages) or section (for LaTeX and RTF).
markrad	0:cdf462088d13	331
markrad	0:cdf462088d13	332	INLINE_SIMPLE_STRUCTS = NO
markrad	0:cdf462088d13	333
markrad	0:cdf462088d13	334	# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
markrad	0:cdf462088d13	335	# is documented as struct, union, or enum with the name of the typedef. So
markrad	0:cdf462088d13	336	# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
markrad	0:cdf462088d13	337	# with name TypeT. When disabled the typedef will appear as a member of a file,
markrad	0:cdf462088d13	338	# namespace, or class. And the struct will be named TypeS. This can typically
markrad	0:cdf462088d13	339	# be useful for C code in case the coding convention dictates that all compound
markrad	0:cdf462088d13	340	# types are typedef'ed and only the typedef is referenced, never the tag name.
markrad	0:cdf462088d13	341
markrad	0:cdf462088d13	342	TYPEDEF_HIDES_STRUCT = NO
markrad	0:cdf462088d13	343
markrad	0:cdf462088d13	344	# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
markrad	0:cdf462088d13	345	# cache is used to resolve symbols given their name and scope. Since this can
markrad	0:cdf462088d13	346	# be an expensive process and often the same symbol appear multiple times in
markrad	0:cdf462088d13	347	# the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too
markrad	0:cdf462088d13	348	# small doxygen will become slower. If the cache is too large, memory is wasted.
markrad	0:cdf462088d13	349	# The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid
markrad	0:cdf462088d13	350	# range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536
markrad	0:cdf462088d13	351	# symbols.
markrad	0:cdf462088d13	352
markrad	0:cdf462088d13	353	LOOKUP_CACHE_SIZE = 0
markrad	0:cdf462088d13	354
markrad	0:cdf462088d13	355	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	356	# Build related configuration options
markrad	0:cdf462088d13	357	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	358
markrad	0:cdf462088d13	359	# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
markrad	0:cdf462088d13	360	# documentation are documented, even if no documentation was available.
markrad	0:cdf462088d13	361	# Private class members and static file members will be hidden unless
markrad	0:cdf462088d13	362	# the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
markrad	0:cdf462088d13	363
markrad	0:cdf462088d13	364	EXTRACT_ALL = YES
markrad	0:cdf462088d13	365
markrad	0:cdf462088d13	366	# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
markrad	0:cdf462088d13	367	# will be included in the documentation.
markrad	0:cdf462088d13	368
markrad	0:cdf462088d13	369	EXTRACT_PRIVATE = YES
markrad	0:cdf462088d13	370
markrad	0:cdf462088d13	371	# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
markrad	0:cdf462088d13	372	# scope will be included in the documentation.
markrad	0:cdf462088d13	373
markrad	0:cdf462088d13	374	EXTRACT_PACKAGE = NO
markrad	0:cdf462088d13	375
markrad	0:cdf462088d13	376	# If the EXTRACT_STATIC tag is set to YES all static members of a file
markrad	0:cdf462088d13	377	# will be included in the documentation.
markrad	0:cdf462088d13	378
markrad	0:cdf462088d13	379	EXTRACT_STATIC = YES
markrad	0:cdf462088d13	380
markrad	0:cdf462088d13	381	# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
markrad	0:cdf462088d13	382	# defined locally in source files will be included in the documentation.
markrad	0:cdf462088d13	383	# If set to NO only classes defined in header files are included.
markrad	0:cdf462088d13	384
markrad	0:cdf462088d13	385	EXTRACT_LOCAL_CLASSES = YES
markrad	0:cdf462088d13	386
markrad	0:cdf462088d13	387	# This flag is only useful for Objective-C code. When set to YES local
markrad	0:cdf462088d13	388	# methods, which are defined in the implementation section but not in
markrad	0:cdf462088d13	389	# the interface are included in the documentation.
markrad	0:cdf462088d13	390	# If set to NO (the default) only methods in the interface are included.
markrad	0:cdf462088d13	391
markrad	0:cdf462088d13	392	EXTRACT_LOCAL_METHODS = YES
markrad	0:cdf462088d13	393
markrad	0:cdf462088d13	394	# If this flag is set to YES, the members of anonymous namespaces will be
markrad	0:cdf462088d13	395	# extracted and appear in the documentation as a namespace called
markrad	0:cdf462088d13	396	# 'anonymous_namespace{file}', where file will be replaced with the base
markrad	0:cdf462088d13	397	# name of the file that contains the anonymous namespace. By default
markrad	0:cdf462088d13	398	# anonymous namespaces are hidden.
markrad	0:cdf462088d13	399
markrad	0:cdf462088d13	400	EXTRACT_ANON_NSPACES = YES
markrad	0:cdf462088d13	401
markrad	0:cdf462088d13	402	# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
markrad	0:cdf462088d13	403	# undocumented members of documented classes, files or namespaces.
markrad	0:cdf462088d13	404	# If set to NO (the default) these members will be included in the
markrad	0:cdf462088d13	405	# various overviews, but no documentation section is generated.
markrad	0:cdf462088d13	406	# This option has no effect if EXTRACT_ALL is enabled.
markrad	0:cdf462088d13	407
markrad	0:cdf462088d13	408	HIDE_UNDOC_MEMBERS = NO
markrad	0:cdf462088d13	409
markrad	0:cdf462088d13	410	# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
markrad	0:cdf462088d13	411	# undocumented classes that are normally visible in the class hierarchy.
markrad	0:cdf462088d13	412	# If set to NO (the default) these classes will be included in the various
markrad	0:cdf462088d13	413	# overviews. This option has no effect if EXTRACT_ALL is enabled.
markrad	0:cdf462088d13	414
markrad	0:cdf462088d13	415	HIDE_UNDOC_CLASSES = NO
markrad	0:cdf462088d13	416
markrad	0:cdf462088d13	417	# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
markrad	0:cdf462088d13	418	# friend (class\|struct\|union) declarations.
markrad	0:cdf462088d13	419	# If set to NO (the default) these declarations will be included in the
markrad	0:cdf462088d13	420	# documentation.
markrad	0:cdf462088d13	421
markrad	0:cdf462088d13	422	HIDE_FRIEND_COMPOUNDS = NO
markrad	0:cdf462088d13	423
markrad	0:cdf462088d13	424	# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
markrad	0:cdf462088d13	425	# documentation blocks found inside the body of a function.
markrad	0:cdf462088d13	426	# If set to NO (the default) these blocks will be appended to the
markrad	0:cdf462088d13	427	# function's detailed documentation block.
markrad	0:cdf462088d13	428
markrad	0:cdf462088d13	429	HIDE_IN_BODY_DOCS = NO
markrad	0:cdf462088d13	430
markrad	0:cdf462088d13	431	# The INTERNAL_DOCS tag determines if documentation
markrad	0:cdf462088d13	432	# that is typed after a \internal command is included. If the tag is set
markrad	0:cdf462088d13	433	# to NO (the default) then the documentation will be excluded.
markrad	0:cdf462088d13	434	# Set it to YES to include the internal documentation.
markrad	0:cdf462088d13	435
markrad	0:cdf462088d13	436	INTERNAL_DOCS = NO
markrad	0:cdf462088d13	437
markrad	0:cdf462088d13	438	# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
markrad	0:cdf462088d13	439	# file names in lower-case letters. If set to YES upper-case letters are also
markrad	0:cdf462088d13	440	# allowed. This is useful if you have classes or files whose names only differ
markrad	0:cdf462088d13	441	# in case and if your file system supports case sensitive file names. Windows
markrad	0:cdf462088d13	442	# and Mac users are advised to set this option to NO.
markrad	0:cdf462088d13	443
markrad	0:cdf462088d13	444	CASE_SENSE_NAMES = NO
markrad	0:cdf462088d13	445
markrad	0:cdf462088d13	446	# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
markrad	0:cdf462088d13	447	# will show members with their full class and namespace scopes in the
markrad	0:cdf462088d13	448	# documentation. If set to YES the scope will be hidden.
markrad	0:cdf462088d13	449
markrad	0:cdf462088d13	450	HIDE_SCOPE_NAMES = NO
markrad	0:cdf462088d13	451
markrad	0:cdf462088d13	452	# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
markrad	0:cdf462088d13	453	# will put a list of the files that are included by a file in the documentation
markrad	0:cdf462088d13	454	# of that file.
markrad	0:cdf462088d13	455
markrad	0:cdf462088d13	456	SHOW_INCLUDE_FILES = YES
markrad	0:cdf462088d13	457
markrad	0:cdf462088d13	458	# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
markrad	0:cdf462088d13	459	# will list include files with double quotes in the documentation
markrad	0:cdf462088d13	460	# rather than with sharp brackets.
markrad	0:cdf462088d13	461
markrad	0:cdf462088d13	462	FORCE_LOCAL_INCLUDES = NO
markrad	0:cdf462088d13	463
markrad	0:cdf462088d13	464	# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
markrad	0:cdf462088d13	465	# is inserted in the documentation for inline members.
markrad	0:cdf462088d13	466
markrad	0:cdf462088d13	467	INLINE_INFO = YES
markrad	0:cdf462088d13	468
markrad	0:cdf462088d13	469	# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
markrad	0:cdf462088d13	470	# will sort the (detailed) documentation of file and class members
markrad	0:cdf462088d13	471	# alphabetically by member name. If set to NO the members will appear in
markrad	0:cdf462088d13	472	# declaration order.
markrad	0:cdf462088d13	473
markrad	0:cdf462088d13	474	SORT_MEMBER_DOCS = YES
markrad	0:cdf462088d13	475
markrad	0:cdf462088d13	476	# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
markrad	0:cdf462088d13	477	# brief documentation of file, namespace and class members alphabetically
markrad	0:cdf462088d13	478	# by member name. If set to NO (the default) the members will appear in
markrad	0:cdf462088d13	479	# declaration order.
markrad	0:cdf462088d13	480
markrad	0:cdf462088d13	481	SORT_BRIEF_DOCS = NO
markrad	0:cdf462088d13	482
markrad	0:cdf462088d13	483	# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
markrad	0:cdf462088d13	484	# will sort the (brief and detailed) documentation of class members so that
markrad	0:cdf462088d13	485	# constructors and destructors are listed first. If set to NO (the default)
markrad	0:cdf462088d13	486	# the constructors will appear in the respective orders defined by
markrad	0:cdf462088d13	487	# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
markrad	0:cdf462088d13	488	# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
markrad	0:cdf462088d13	489	# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
markrad	0:cdf462088d13	490
markrad	0:cdf462088d13	491	SORT_MEMBERS_CTORS_1ST = NO
markrad	0:cdf462088d13	492
markrad	0:cdf462088d13	493	# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
markrad	0:cdf462088d13	494	# hierarchy of group names into alphabetical order. If set to NO (the default)
markrad	0:cdf462088d13	495	# the group names will appear in their defined order.
markrad	0:cdf462088d13	496
markrad	0:cdf462088d13	497	SORT_GROUP_NAMES = NO
markrad	0:cdf462088d13	498
markrad	0:cdf462088d13	499	# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
markrad	0:cdf462088d13	500	# sorted by fully-qualified names, including namespaces. If set to
markrad	0:cdf462088d13	501	# NO (the default), the class list will be sorted only by class name,
markrad	0:cdf462088d13	502	# not including the namespace part.
markrad	0:cdf462088d13	503	# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
markrad	0:cdf462088d13	504	# Note: This option applies only to the class list, not to the
markrad	0:cdf462088d13	505	# alphabetical list.
markrad	0:cdf462088d13	506
markrad	0:cdf462088d13	507	SORT_BY_SCOPE_NAME = NO
markrad	0:cdf462088d13	508
markrad	0:cdf462088d13	509	# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
markrad	0:cdf462088d13	510	# do proper type resolution of all parameters of a function it will reject a
markrad	0:cdf462088d13	511	# match between the prototype and the implementation of a member function even
markrad	0:cdf462088d13	512	# if there is only one candidate or it is obvious which candidate to choose
markrad	0:cdf462088d13	513	# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
markrad	0:cdf462088d13	514	# will still accept a match between prototype and implementation in such cases.
markrad	0:cdf462088d13	515
markrad	0:cdf462088d13	516	STRICT_PROTO_MATCHING = NO
markrad	0:cdf462088d13	517
markrad	0:cdf462088d13	518	# The GENERATE_TODOLIST tag can be used to enable (YES) or
markrad	0:cdf462088d13	519	# disable (NO) the todo list. This list is created by putting \todo
markrad	0:cdf462088d13	520	# commands in the documentation.
markrad	0:cdf462088d13	521
markrad	0:cdf462088d13	522	GENERATE_TODOLIST = YES
markrad	0:cdf462088d13	523
markrad	0:cdf462088d13	524	# The GENERATE_TESTLIST tag can be used to enable (YES) or
markrad	0:cdf462088d13	525	# disable (NO) the test list. This list is created by putting \test
markrad	0:cdf462088d13	526	# commands in the documentation.
markrad	0:cdf462088d13	527
markrad	0:cdf462088d13	528	GENERATE_TESTLIST = YES
markrad	0:cdf462088d13	529
markrad	0:cdf462088d13	530	# The GENERATE_BUGLIST tag can be used to enable (YES) or
markrad	0:cdf462088d13	531	# disable (NO) the bug list. This list is created by putting \bug
markrad	0:cdf462088d13	532	# commands in the documentation.
markrad	0:cdf462088d13	533
markrad	0:cdf462088d13	534	GENERATE_BUGLIST = YES
markrad	0:cdf462088d13	535
markrad	0:cdf462088d13	536	# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
markrad	0:cdf462088d13	537	# disable (NO) the deprecated list. This list is created by putting
markrad	0:cdf462088d13	538	# \deprecated commands in the documentation.
markrad	0:cdf462088d13	539
markrad	0:cdf462088d13	540	GENERATE_DEPRECATEDLIST= YES
markrad	0:cdf462088d13	541
markrad	0:cdf462088d13	542	# The ENABLED_SECTIONS tag can be used to enable conditional
markrad	0:cdf462088d13	543	# documentation sections, marked by \if section-label ... \endif
markrad	0:cdf462088d13	544	# and \cond section-label ... \endcond blocks.
markrad	0:cdf462088d13	545
markrad	0:cdf462088d13	546	ENABLED_SECTIONS =
markrad	0:cdf462088d13	547
markrad	0:cdf462088d13	548	# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
markrad	0:cdf462088d13	549	# the initial value of a variable or macro consists of for it to appear in
markrad	0:cdf462088d13	550	# the documentation. If the initializer consists of more lines than specified
markrad	0:cdf462088d13	551	# here it will be hidden. Use a value of 0 to hide initializers completely.
markrad	0:cdf462088d13	552	# The appearance of the initializer of individual variables and macros in the
markrad	0:cdf462088d13	553	# documentation can be controlled using \showinitializer or \hideinitializer
markrad	0:cdf462088d13	554	# command in the documentation regardless of this setting.
markrad	0:cdf462088d13	555
markrad	0:cdf462088d13	556	MAX_INITIALIZER_LINES = 30
markrad	0:cdf462088d13	557
markrad	0:cdf462088d13	558	# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
markrad	0:cdf462088d13	559	# at the bottom of the documentation of classes and structs. If set to YES the
markrad	0:cdf462088d13	560	# list will mention the files that were used to generate the documentation.
markrad	0:cdf462088d13	561
markrad	0:cdf462088d13	562	SHOW_USED_FILES = YES
markrad	0:cdf462088d13	563
markrad	0:cdf462088d13	564	# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
markrad	0:cdf462088d13	565	# This will remove the Files entry from the Quick Index and from the
markrad	0:cdf462088d13	566	# Folder Tree View (if specified). The default is YES.
markrad	0:cdf462088d13	567
markrad	0:cdf462088d13	568	SHOW_FILES = YES
markrad	0:cdf462088d13	569
markrad	0:cdf462088d13	570	# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
markrad	0:cdf462088d13	571	# Namespaces page.
markrad	0:cdf462088d13	572	# This will remove the Namespaces entry from the Quick Index
markrad	0:cdf462088d13	573	# and from the Folder Tree View (if specified). The default is YES.
markrad	0:cdf462088d13	574
markrad	0:cdf462088d13	575	SHOW_NAMESPACES = YES
markrad	0:cdf462088d13	576
markrad	0:cdf462088d13	577	# The FILE_VERSION_FILTER tag can be used to specify a program or script that
markrad	0:cdf462088d13	578	# doxygen should invoke to get the current version for each file (typically from
markrad	0:cdf462088d13	579	# the version control system). Doxygen will invoke the program by executing (via
markrad	0:cdf462088d13	580	# popen()) the command <command> <input-file>, where <command> is the value of
markrad	0:cdf462088d13	581	# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
markrad	0:cdf462088d13	582	# provided by doxygen. Whatever the program writes to standard output
markrad	0:cdf462088d13	583	# is used as the file version. See the manual for examples.
markrad	0:cdf462088d13	584
markrad	0:cdf462088d13	585	FILE_VERSION_FILTER =
markrad	0:cdf462088d13	586
markrad	0:cdf462088d13	587	# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
markrad	0:cdf462088d13	588	# by doxygen. The layout file controls the global structure of the generated
markrad	0:cdf462088d13	589	# output files in an output format independent way. To create the layout file
markrad	0:cdf462088d13	590	# that represents doxygen's defaults, run doxygen with the -l option.
markrad	0:cdf462088d13	591	# You can optionally specify a file name after the option, if omitted
markrad	0:cdf462088d13	592	# DoxygenLayout.xml will be used as the name of the layout file.
markrad	0:cdf462088d13	593
markrad	0:cdf462088d13	594	LAYOUT_FILE =
markrad	0:cdf462088d13	595
markrad	0:cdf462088d13	596	# The CITE_BIB_FILES tag can be used to specify one or more bib files
markrad	0:cdf462088d13	597	# containing the references data. This must be a list of .bib files. The
markrad	0:cdf462088d13	598	# .bib extension is automatically appended if omitted. Using this command
markrad	0:cdf462088d13	599	# requires the bibtex tool to be installed. See also
markrad	0:cdf462088d13	600	# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
markrad	0:cdf462088d13	601	# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
markrad	0:cdf462088d13	602	# feature you need bibtex and perl available in the search path. Do not use
markrad	0:cdf462088d13	603	# file names with spaces, bibtex cannot handle them.
markrad	0:cdf462088d13	604
markrad	0:cdf462088d13	605	CITE_BIB_FILES =
markrad	0:cdf462088d13	606
markrad	0:cdf462088d13	607	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	608	# configuration options related to warning and progress messages
markrad	0:cdf462088d13	609	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	610
markrad	0:cdf462088d13	611	# The QUIET tag can be used to turn on/off the messages that are generated
markrad	0:cdf462088d13	612	# by doxygen. Possible values are YES and NO. If left blank NO is used.
markrad	0:cdf462088d13	613
markrad	0:cdf462088d13	614	QUIET = NO
markrad	0:cdf462088d13	615
markrad	0:cdf462088d13	616	# The WARNINGS tag can be used to turn on/off the warning messages that are
markrad	0:cdf462088d13	617	# generated by doxygen. Possible values are YES and NO. If left blank
markrad	0:cdf462088d13	618	# NO is used.
markrad	0:cdf462088d13	619
markrad	0:cdf462088d13	620	WARNINGS = YES
markrad	0:cdf462088d13	621
markrad	0:cdf462088d13	622	# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
markrad	0:cdf462088d13	623	# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
markrad	0:cdf462088d13	624	# automatically be disabled.
markrad	0:cdf462088d13	625
markrad	0:cdf462088d13	626	WARN_IF_UNDOCUMENTED = YES
markrad	0:cdf462088d13	627
markrad	0:cdf462088d13	628	# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
markrad	0:cdf462088d13	629	# potential errors in the documentation, such as not documenting some
markrad	0:cdf462088d13	630	# parameters in a documented function, or documenting parameters that
markrad	0:cdf462088d13	631	# don't exist or using markup commands wrongly.
markrad	0:cdf462088d13	632
markrad	0:cdf462088d13	633	WARN_IF_DOC_ERROR = YES
markrad	0:cdf462088d13	634
markrad	0:cdf462088d13	635	# The WARN_NO_PARAMDOC option can be enabled to get warnings for
markrad	0:cdf462088d13	636	# functions that are documented, but have no documentation for their parameters
markrad	0:cdf462088d13	637	# or return value. If set to NO (the default) doxygen will only warn about
markrad	0:cdf462088d13	638	# wrong or incomplete parameter documentation, but not about the absence of
markrad	0:cdf462088d13	639	# documentation.
markrad	0:cdf462088d13	640
markrad	0:cdf462088d13	641	WARN_NO_PARAMDOC = NO
markrad	0:cdf462088d13	642
markrad	0:cdf462088d13	643	# The WARN_FORMAT tag determines the format of the warning messages that
markrad	0:cdf462088d13	644	# doxygen can produce. The string should contain the $file, $line, and $text
markrad	0:cdf462088d13	645	# tags, which will be replaced by the file and line number from which the
markrad	0:cdf462088d13	646	# warning originated and the warning text. Optionally the format may contain
markrad	0:cdf462088d13	647	# $version, which will be replaced by the version of the file (if it could
markrad	0:cdf462088d13	648	# be obtained via FILE_VERSION_FILTER)
markrad	0:cdf462088d13	649
markrad	0:cdf462088d13	650	WARN_FORMAT = "$file:$line: $text"
markrad	0:cdf462088d13	651
markrad	0:cdf462088d13	652	# The WARN_LOGFILE tag can be used to specify a file to which warning
markrad	0:cdf462088d13	653	# and error messages should be written. If left blank the output is written
markrad	0:cdf462088d13	654	# to stderr.
markrad	0:cdf462088d13	655
markrad	0:cdf462088d13	656	WARN_LOGFILE =
markrad	0:cdf462088d13	657
markrad	0:cdf462088d13	658	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	659	# configuration options related to the input files
markrad	0:cdf462088d13	660	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	661
markrad	0:cdf462088d13	662	# The INPUT tag can be used to specify the files and/or directories that contain
markrad	0:cdf462088d13	663	# documented source files. You may enter file names like "myfile.cpp" or
markrad	0:cdf462088d13	664	# directories like "/usr/src/myproject". Separate the files or directories
markrad	0:cdf462088d13	665	# with spaces.
markrad	0:cdf462088d13	666
markrad	0:cdf462088d13	667	INPUT = .
markrad	0:cdf462088d13	668
markrad	0:cdf462088d13	669	# This tag can be used to specify the character encoding of the source files
markrad	0:cdf462088d13	670	# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
markrad	0:cdf462088d13	671	# also the default input encoding. Doxygen uses libiconv (or the iconv built
markrad	0:cdf462088d13	672	# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
markrad	0:cdf462088d13	673	# the list of possible encodings.
markrad	0:cdf462088d13	674
markrad	0:cdf462088d13	675	INPUT_ENCODING = UTF-8
markrad	0:cdf462088d13	676
markrad	0:cdf462088d13	677	# If the value of the INPUT tag contains directories, you can use the
markrad	0:cdf462088d13	678	# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
markrad	0:cdf462088d13	679	# and *.h) to filter out the source-files in the directories. If left
markrad	0:cdf462088d13	680	# blank the following patterns are tested:
markrad	0:cdf462088d13	681	# .c .cc .cxx .cpp .c++ .d .java .ii .ixx .ipp .i++ .inl .h .hh
markrad	0:cdf462088d13	682	# .hxx .hpp .h++ .idl .odl .cs .php .php3 .inc .m .mm .dox *.py
markrad	0:cdf462088d13	683	# .f90 .f .for .vhd *.vhdl
markrad	0:cdf462088d13	684
markrad	0:cdf462088d13	685	FILE_PATTERNS = *.h
markrad	0:cdf462088d13	686
markrad	0:cdf462088d13	687	# The RECURSIVE tag can be used to turn specify whether or not subdirectories
markrad	0:cdf462088d13	688	# should be searched for input files as well. Possible values are YES and NO.
markrad	0:cdf462088d13	689	# If left blank NO is used.
markrad	0:cdf462088d13	690
markrad	0:cdf462088d13	691	RECURSIVE = YES
markrad	0:cdf462088d13	692
markrad	0:cdf462088d13	693	# The EXCLUDE tag can be used to specify files and/or directories that should be
markrad	0:cdf462088d13	694	# excluded from the INPUT source files. This way you can easily exclude a
markrad	0:cdf462088d13	695	# subdirectory from a directory tree whose root is specified with the INPUT tag.
markrad	0:cdf462088d13	696	# Note that relative paths are relative to the directory from which doxygen is
markrad	0:cdf462088d13	697	# run.
markrad	0:cdf462088d13	698
markrad	0:cdf462088d13	699	EXCLUDE = configs yotta/module
markrad	0:cdf462088d13	700
markrad	0:cdf462088d13	701	# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
markrad	0:cdf462088d13	702	# directories that are symbolic links (a Unix file system feature) are excluded
markrad	0:cdf462088d13	703	# from the input.
markrad	0:cdf462088d13	704
markrad	0:cdf462088d13	705	EXCLUDE_SYMLINKS = NO
markrad	0:cdf462088d13	706
markrad	0:cdf462088d13	707	# If the value of the INPUT tag contains directories, you can use the
markrad	0:cdf462088d13	708	# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
markrad	0:cdf462088d13	709	# certain files from those directories. Note that the wildcards are matched
markrad	0:cdf462088d13	710	# against the file with absolute path, so to exclude all test directories
markrad	0:cdf462088d13	711	# for example use the pattern /test/
markrad	0:cdf462088d13	712
markrad	0:cdf462088d13	713	EXCLUDE_PATTERNS = _internal.h _wrap.h
markrad	0:cdf462088d13	714
markrad	0:cdf462088d13	715	# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
markrad	0:cdf462088d13	716	# (namespaces, classes, functions, etc.) that should be excluded from the
markrad	0:cdf462088d13	717	# output. The symbol name can be a fully qualified name, a word, or if the
markrad	0:cdf462088d13	718	# wildcard * is used, a substring. Examples: ANamespace, AClass,
markrad	0:cdf462088d13	719	# AClass::ANamespace, ANamespace::*Test
markrad	0:cdf462088d13	720
markrad	0:cdf462088d13	721	EXCLUDE_SYMBOLS =
markrad	0:cdf462088d13	722
markrad	0:cdf462088d13	723	# The EXAMPLE_PATH tag can be used to specify one or more files or
markrad	0:cdf462088d13	724	# directories that contain example code fragments that are included (see
markrad	0:cdf462088d13	725	# the \include command).
markrad	0:cdf462088d13	726
markrad	0:cdf462088d13	727	EXAMPLE_PATH =
markrad	0:cdf462088d13	728
markrad	0:cdf462088d13	729	# If the value of the EXAMPLE_PATH tag contains directories, you can use the
markrad	0:cdf462088d13	730	# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
markrad	0:cdf462088d13	731	# and *.h) to filter out the source-files in the directories. If left
markrad	0:cdf462088d13	732	# blank all files are included.
markrad	0:cdf462088d13	733
markrad	0:cdf462088d13	734	EXAMPLE_PATTERNS = *
markrad	0:cdf462088d13	735
markrad	0:cdf462088d13	736	# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
markrad	0:cdf462088d13	737	# searched for input files to be used with the \include or \dontinclude
markrad	0:cdf462088d13	738	# commands irrespective of the value of the RECURSIVE tag.
markrad	0:cdf462088d13	739	# Possible values are YES and NO. If left blank NO is used.
markrad	0:cdf462088d13	740
markrad	0:cdf462088d13	741	EXAMPLE_RECURSIVE = NO
markrad	0:cdf462088d13	742
markrad	0:cdf462088d13	743	# The IMAGE_PATH tag can be used to specify one or more files or
markrad	0:cdf462088d13	744	# directories that contain image that are included in the documentation (see
markrad	0:cdf462088d13	745	# the \image command).
markrad	0:cdf462088d13	746
markrad	0:cdf462088d13	747	IMAGE_PATH =
markrad	0:cdf462088d13	748
markrad	0:cdf462088d13	749	# The INPUT_FILTER tag can be used to specify a program that doxygen should
markrad	0:cdf462088d13	750	# invoke to filter for each input file. Doxygen will invoke the filter program
markrad	0:cdf462088d13	751	# by executing (via popen()) the command <filter> <input-file>, where <filter>
markrad	0:cdf462088d13	752	# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
markrad	0:cdf462088d13	753	# input file. Doxygen will then use the output that the filter program writes
markrad	0:cdf462088d13	754	# to standard output.
markrad	0:cdf462088d13	755	# If FILTER_PATTERNS is specified, this tag will be ignored.
markrad	0:cdf462088d13	756	# Note that the filter must not add or remove lines; it is applied before the
markrad	0:cdf462088d13	757	# code is scanned, but not when the output code is generated. If lines are added
markrad	0:cdf462088d13	758	# or removed, the anchors will not be placed correctly.
markrad	0:cdf462088d13	759
markrad	0:cdf462088d13	760	INPUT_FILTER =
markrad	0:cdf462088d13	761
markrad	0:cdf462088d13	762	# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
markrad	0:cdf462088d13	763	# basis.
markrad	0:cdf462088d13	764	# Doxygen will compare the file name with each pattern and apply the
markrad	0:cdf462088d13	765	# filter if there is a match.
markrad	0:cdf462088d13	766	# The filters are a list of the form:
markrad	0:cdf462088d13	767	# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
markrad	0:cdf462088d13	768	# info on how filters are used. If FILTER_PATTERNS is empty or if
markrad	0:cdf462088d13	769	# non of the patterns match the file name, INPUT_FILTER is applied.
markrad	0:cdf462088d13	770
markrad	0:cdf462088d13	771	FILTER_PATTERNS =
markrad	0:cdf462088d13	772
markrad	0:cdf462088d13	773	# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
markrad	0:cdf462088d13	774	# INPUT_FILTER) will be used to filter the input files when producing source
markrad	0:cdf462088d13	775	# files to browse (i.e. when SOURCE_BROWSER is set to YES).
markrad	0:cdf462088d13	776
markrad	0:cdf462088d13	777	FILTER_SOURCE_FILES = NO
markrad	0:cdf462088d13	778
markrad	0:cdf462088d13	779	# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
markrad	0:cdf462088d13	780	# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
markrad	0:cdf462088d13	781	# and it is also possible to disable source filtering for a specific pattern
markrad	0:cdf462088d13	782	# using *.ext= (so without naming a filter). This option only has effect when
markrad	0:cdf462088d13	783	# FILTER_SOURCE_FILES is enabled.
markrad	0:cdf462088d13	784
markrad	0:cdf462088d13	785	FILTER_SOURCE_PATTERNS =
markrad	0:cdf462088d13	786
markrad	0:cdf462088d13	787	# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that
markrad	0:cdf462088d13	788	# is part of the input, its contents will be placed on the main page
markrad	0:cdf462088d13	789	# (index.html). This can be useful if you have a project on for instance GitHub
markrad	0:cdf462088d13	790	# and want reuse the introduction page also for the doxygen output.
markrad	0:cdf462088d13	791
markrad	0:cdf462088d13	792	USE_MDFILE_AS_MAINPAGE =
markrad	0:cdf462088d13	793
markrad	0:cdf462088d13	794	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	795	# configuration options related to source browsing
markrad	0:cdf462088d13	796	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	797
markrad	0:cdf462088d13	798	# If the SOURCE_BROWSER tag is set to YES then a list of source files will
markrad	0:cdf462088d13	799	# be generated. Documented entities will be cross-referenced with these sources.
markrad	0:cdf462088d13	800	# Note: To get rid of all source code in the generated output, make sure also
markrad	0:cdf462088d13	801	# VERBATIM_HEADERS is set to NO.
markrad	0:cdf462088d13	802
markrad	0:cdf462088d13	803	SOURCE_BROWSER = YES
markrad	0:cdf462088d13	804
markrad	0:cdf462088d13	805	# Setting the INLINE_SOURCES tag to YES will include the body
markrad	0:cdf462088d13	806	# of functions and classes directly in the documentation.
markrad	0:cdf462088d13	807
markrad	0:cdf462088d13	808	INLINE_SOURCES = NO
markrad	0:cdf462088d13	809
markrad	0:cdf462088d13	810	# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
markrad	0:cdf462088d13	811	# doxygen to hide any special comment blocks from generated source code
markrad	0:cdf462088d13	812	# fragments. Normal C, C++ and Fortran comments will always remain visible.
markrad	0:cdf462088d13	813
markrad	0:cdf462088d13	814	STRIP_CODE_COMMENTS = YES
markrad	0:cdf462088d13	815
markrad	0:cdf462088d13	816	# If the REFERENCED_BY_RELATION tag is set to YES
markrad	0:cdf462088d13	817	# then for each documented function all documented
markrad	0:cdf462088d13	818	# functions referencing it will be listed.
markrad	0:cdf462088d13	819
markrad	0:cdf462088d13	820	REFERENCED_BY_RELATION = YES
markrad	0:cdf462088d13	821
markrad	0:cdf462088d13	822	# If the REFERENCES_RELATION tag is set to YES
markrad	0:cdf462088d13	823	# then for each documented function all documented entities
markrad	0:cdf462088d13	824	# called/used by that function will be listed.
markrad	0:cdf462088d13	825
markrad	0:cdf462088d13	826	REFERENCES_RELATION = YES
markrad	0:cdf462088d13	827
markrad	0:cdf462088d13	828	# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
markrad	0:cdf462088d13	829	# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
markrad	0:cdf462088d13	830	# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
markrad	0:cdf462088d13	831	# link to the source code.
markrad	0:cdf462088d13	832	# Otherwise they will link to the documentation.
markrad	0:cdf462088d13	833
markrad	0:cdf462088d13	834	REFERENCES_LINK_SOURCE = YES
markrad	0:cdf462088d13	835
markrad	0:cdf462088d13	836	# If the USE_HTAGS tag is set to YES then the references to source code
markrad	0:cdf462088d13	837	# will point to the HTML generated by the htags(1) tool instead of doxygen
markrad	0:cdf462088d13	838	# built-in source browser. The htags tool is part of GNU's global source
markrad	0:cdf462088d13	839	# tagging system (see http://www.gnu.org/software/global/global.html). You
markrad	0:cdf462088d13	840	# will need version 4.8.6 or higher.
markrad	0:cdf462088d13	841
markrad	0:cdf462088d13	842	USE_HTAGS = NO
markrad	0:cdf462088d13	843
markrad	0:cdf462088d13	844	# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
markrad	0:cdf462088d13	845	# will generate a verbatim copy of the header file for each class for
markrad	0:cdf462088d13	846	# which an include is specified. Set to NO to disable this.
markrad	0:cdf462088d13	847
markrad	0:cdf462088d13	848	VERBATIM_HEADERS = YES
markrad	0:cdf462088d13	849
markrad	0:cdf462088d13	850	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	851	# configuration options related to the alphabetical class index
markrad	0:cdf462088d13	852	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	853
markrad	0:cdf462088d13	854	# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
markrad	0:cdf462088d13	855	# of all compounds will be generated. Enable this if the project
markrad	0:cdf462088d13	856	# contains a lot of classes, structs, unions or interfaces.
markrad	0:cdf462088d13	857
markrad	0:cdf462088d13	858	ALPHABETICAL_INDEX = NO
markrad	0:cdf462088d13	859
markrad	0:cdf462088d13	860	# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
markrad	0:cdf462088d13	861	# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
markrad	0:cdf462088d13	862	# in which this list will be split (can be a number in the range [1..20])
markrad	0:cdf462088d13	863
markrad	0:cdf462088d13	864	COLS_IN_ALPHA_INDEX = 5
markrad	0:cdf462088d13	865
markrad	0:cdf462088d13	866	# In case all classes in a project start with a common prefix, all
markrad	0:cdf462088d13	867	# classes will be put under the same header in the alphabetical index.
markrad	0:cdf462088d13	868	# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
markrad	0:cdf462088d13	869	# should be ignored while generating the index headers.
markrad	0:cdf462088d13	870
markrad	0:cdf462088d13	871	IGNORE_PREFIX =
markrad	0:cdf462088d13	872
markrad	0:cdf462088d13	873	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	874	# configuration options related to the HTML output
markrad	0:cdf462088d13	875	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	876
markrad	0:cdf462088d13	877	# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	878	# generate HTML output.
markrad	0:cdf462088d13	879
markrad	0:cdf462088d13	880	GENERATE_HTML = YES
markrad	0:cdf462088d13	881
markrad	0:cdf462088d13	882	# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
markrad	0:cdf462088d13	883	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
markrad	0:cdf462088d13	884	# put in front of it. If left blank `html' will be used as the default path.
markrad	0:cdf462088d13	885
markrad	0:cdf462088d13	886	HTML_OUTPUT = .
markrad	0:cdf462088d13	887
markrad	0:cdf462088d13	888	# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
markrad	0:cdf462088d13	889	# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
markrad	0:cdf462088d13	890	# doxygen will generate files with .html extension.
markrad	0:cdf462088d13	891
markrad	0:cdf462088d13	892	HTML_FILE_EXTENSION = .html
markrad	0:cdf462088d13	893
markrad	0:cdf462088d13	894	# The HTML_HEADER tag can be used to specify a personal HTML header for
markrad	0:cdf462088d13	895	# each generated HTML page. If it is left blank doxygen will generate a
markrad	0:cdf462088d13	896	# standard header. Note that when using a custom header you are responsible
markrad	0:cdf462088d13	897	# for the proper inclusion of any scripts and style sheets that doxygen
markrad	0:cdf462088d13	898	# needs, which is dependent on the configuration options used.
markrad	0:cdf462088d13	899	# It is advised to generate a default header using "doxygen -w html
markrad	0:cdf462088d13	900	# header.html footer.html stylesheet.css YourConfigFile" and then modify
markrad	0:cdf462088d13	901	# that header. Note that the header is subject to change so you typically
markrad	0:cdf462088d13	902	# have to redo this when upgrading to a newer version of doxygen or when
markrad	0:cdf462088d13	903	# changing the value of configuration settings such as GENERATE_TREEVIEW!
markrad	0:cdf462088d13	904
markrad	0:cdf462088d13	905	HTML_HEADER =
markrad	0:cdf462088d13	906
markrad	0:cdf462088d13	907	# The HTML_FOOTER tag can be used to specify a personal HTML footer for
markrad	0:cdf462088d13	908	# each generated HTML page. If it is left blank doxygen will generate a
markrad	0:cdf462088d13	909	# standard footer.
markrad	0:cdf462088d13	910
markrad	0:cdf462088d13	911	HTML_FOOTER =
markrad	0:cdf462088d13	912
markrad	0:cdf462088d13	913	# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
markrad	0:cdf462088d13	914	# style sheet that is used by each HTML page. It can be used to
markrad	0:cdf462088d13	915	# fine-tune the look of the HTML output. If left blank doxygen will
markrad	0:cdf462088d13	916	# generate a default style sheet. Note that it is recommended to use
markrad	0:cdf462088d13	917	# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
markrad	0:cdf462088d13	918	# tag will in the future become obsolete.
markrad	0:cdf462088d13	919
markrad	0:cdf462088d13	920	HTML_STYLESHEET =
markrad	0:cdf462088d13	921
markrad	0:cdf462088d13	922	# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
markrad	0:cdf462088d13	923	# user-defined cascading style sheet that is included after the standard
markrad	0:cdf462088d13	924	# style sheets created by doxygen. Using this option one can overrule
markrad	0:cdf462088d13	925	# certain style aspects. This is preferred over using HTML_STYLESHEET
markrad	0:cdf462088d13	926	# since it does not replace the standard style sheet and is therefor more
markrad	0:cdf462088d13	927	# robust against future updates. Doxygen will copy the style sheet file to
markrad	0:cdf462088d13	928	# the output directory.
markrad	0:cdf462088d13	929
markrad	0:cdf462088d13	930	HTML_EXTRA_STYLESHEET =
markrad	0:cdf462088d13	931
markrad	0:cdf462088d13	932	# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
markrad	0:cdf462088d13	933	# other source files which should be copied to the HTML output directory. Note
markrad	0:cdf462088d13	934	# that these files will be copied to the base HTML output directory. Use the
markrad	0:cdf462088d13	935	# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
markrad	0:cdf462088d13	936	# files. In the HTML_STYLESHEET file, use the file name only. Also note that
markrad	0:cdf462088d13	937	# the files will be copied as-is; there are no commands or markers available.
markrad	0:cdf462088d13	938
markrad	0:cdf462088d13	939	HTML_EXTRA_FILES =
markrad	0:cdf462088d13	940
markrad	0:cdf462088d13	941	# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
markrad	0:cdf462088d13	942	# Doxygen will adjust the colors in the style sheet and background images
markrad	0:cdf462088d13	943	# according to this color. Hue is specified as an angle on a colorwheel,
markrad	0:cdf462088d13	944	# see http://en.wikipedia.org/wiki/Hue for more information.
markrad	0:cdf462088d13	945	# For instance the value 0 represents red, 60 is yellow, 120 is green,
markrad	0:cdf462088d13	946	# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
markrad	0:cdf462088d13	947	# The allowed range is 0 to 359.
markrad	0:cdf462088d13	948
markrad	0:cdf462088d13	949	HTML_COLORSTYLE_HUE = 220
markrad	0:cdf462088d13	950
markrad	0:cdf462088d13	951	# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
markrad	0:cdf462088d13	952	# the colors in the HTML output. For a value of 0 the output will use
markrad	0:cdf462088d13	953	# grayscales only. A value of 255 will produce the most vivid colors.
markrad	0:cdf462088d13	954
markrad	0:cdf462088d13	955	HTML_COLORSTYLE_SAT = 100
markrad	0:cdf462088d13	956
markrad	0:cdf462088d13	957	# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
markrad	0:cdf462088d13	958	# the luminance component of the colors in the HTML output. Values below
markrad	0:cdf462088d13	959	# 100 gradually make the output lighter, whereas values above 100 make
markrad	0:cdf462088d13	960	# the output darker. The value divided by 100 is the actual gamma applied,
markrad	0:cdf462088d13	961	# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
markrad	0:cdf462088d13	962	# and 100 does not change the gamma.
markrad	0:cdf462088d13	963
markrad	0:cdf462088d13	964	HTML_COLORSTYLE_GAMMA = 80
markrad	0:cdf462088d13	965
markrad	0:cdf462088d13	966	# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
markrad	0:cdf462088d13	967	# page will contain the date and time when the page was generated. Setting
markrad	0:cdf462088d13	968	# this to NO can help when comparing the output of multiple runs.
markrad	0:cdf462088d13	969
markrad	0:cdf462088d13	970	HTML_TIMESTAMP = YES
markrad	0:cdf462088d13	971
markrad	0:cdf462088d13	972	# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
markrad	0:cdf462088d13	973	# documentation will contain sections that can be hidden and shown after the
markrad	0:cdf462088d13	974	# page has loaded.
markrad	0:cdf462088d13	975
markrad	0:cdf462088d13	976	HTML_DYNAMIC_SECTIONS = NO
markrad	0:cdf462088d13	977
markrad	0:cdf462088d13	978	# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
markrad	0:cdf462088d13	979	# entries shown in the various tree structured indices initially; the user
markrad	0:cdf462088d13	980	# can expand and collapse entries dynamically later on. Doxygen will expand
markrad	0:cdf462088d13	981	# the tree to such a level that at most the specified number of entries are
markrad	0:cdf462088d13	982	# visible (unless a fully collapsed tree already exceeds this amount).
markrad	0:cdf462088d13	983	# So setting the number of entries 1 will produce a full collapsed tree by
markrad	0:cdf462088d13	984	# default. 0 is a special value representing an infinite number of entries
markrad	0:cdf462088d13	985	# and will result in a full expanded tree by default.
markrad	0:cdf462088d13	986
markrad	0:cdf462088d13	987	HTML_INDEX_NUM_ENTRIES = 100
markrad	0:cdf462088d13	988
markrad	0:cdf462088d13	989	# If the GENERATE_DOCSET tag is set to YES, additional index files
markrad	0:cdf462088d13	990	# will be generated that can be used as input for Apple's Xcode 3
markrad	0:cdf462088d13	991	# integrated development environment, introduced with OSX 10.5 (Leopard).
markrad	0:cdf462088d13	992	# To create a documentation set, doxygen will generate a Makefile in the
markrad	0:cdf462088d13	993	# HTML output directory. Running make will produce the docset in that
markrad	0:cdf462088d13	994	# directory and running "make install" will install the docset in
markrad	0:cdf462088d13	995	# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
markrad	0:cdf462088d13	996	# it at startup.
markrad	0:cdf462088d13	997	# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
markrad	0:cdf462088d13	998	# for more information.
markrad	0:cdf462088d13	999
markrad	0:cdf462088d13	1000	GENERATE_DOCSET = NO
markrad	0:cdf462088d13	1001
markrad	0:cdf462088d13	1002	# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
markrad	0:cdf462088d13	1003	# feed. A documentation feed provides an umbrella under which multiple
markrad	0:cdf462088d13	1004	# documentation sets from a single provider (such as a company or product suite)
markrad	0:cdf462088d13	1005	# can be grouped.
markrad	0:cdf462088d13	1006
markrad	0:cdf462088d13	1007	DOCSET_FEEDNAME = "Doxygen generated docs"
markrad	0:cdf462088d13	1008
markrad	0:cdf462088d13	1009	# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
markrad	0:cdf462088d13	1010	# should uniquely identify the documentation set bundle. This should be a
markrad	0:cdf462088d13	1011	# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
markrad	0:cdf462088d13	1012	# will append .docset to the name.
markrad	0:cdf462088d13	1013
markrad	0:cdf462088d13	1014	DOCSET_BUNDLE_ID = org.doxygen.Project
markrad	0:cdf462088d13	1015
markrad	0:cdf462088d13	1016	# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
markrad	0:cdf462088d13	1017	# identify the documentation publisher. This should be a reverse domain-name
markrad	0:cdf462088d13	1018	# style string, e.g. com.mycompany.MyDocSet.documentation.
markrad	0:cdf462088d13	1019
markrad	0:cdf462088d13	1020	DOCSET_PUBLISHER_ID = org.doxygen.Publisher
markrad	0:cdf462088d13	1021
markrad	0:cdf462088d13	1022	# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
markrad	0:cdf462088d13	1023
markrad	0:cdf462088d13	1024	DOCSET_PUBLISHER_NAME = Publisher
markrad	0:cdf462088d13	1025
markrad	0:cdf462088d13	1026	# If the GENERATE_HTMLHELP tag is set to YES, additional index files
markrad	0:cdf462088d13	1027	# will be generated that can be used as input for tools like the
markrad	0:cdf462088d13	1028	# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
markrad	0:cdf462088d13	1029	# of the generated HTML documentation.
markrad	0:cdf462088d13	1030
markrad	0:cdf462088d13	1031	GENERATE_HTMLHELP = NO
markrad	0:cdf462088d13	1032
markrad	0:cdf462088d13	1033	# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
markrad	0:cdf462088d13	1034	# be used to specify the file name of the resulting .chm file. You
markrad	0:cdf462088d13	1035	# can add a path in front of the file if the result should not be
markrad	0:cdf462088d13	1036	# written to the html output directory.
markrad	0:cdf462088d13	1037
markrad	0:cdf462088d13	1038	CHM_FILE =
markrad	0:cdf462088d13	1039
markrad	0:cdf462088d13	1040	# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
markrad	0:cdf462088d13	1041	# be used to specify the location (absolute path including file name) of
markrad	0:cdf462088d13	1042	# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
markrad	0:cdf462088d13	1043	# the HTML help compiler on the generated index.hhp.
markrad	0:cdf462088d13	1044
markrad	0:cdf462088d13	1045	HHC_LOCATION =
markrad	0:cdf462088d13	1046
markrad	0:cdf462088d13	1047	# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
markrad	0:cdf462088d13	1048	# controls if a separate .chi index file is generated (YES) or that
markrad	0:cdf462088d13	1049	# it should be included in the master .chm file (NO).
markrad	0:cdf462088d13	1050
markrad	0:cdf462088d13	1051	GENERATE_CHI = NO
markrad	0:cdf462088d13	1052
markrad	0:cdf462088d13	1053	# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
markrad	0:cdf462088d13	1054	# is used to encode HtmlHelp index (hhk), content (hhc) and project file
markrad	0:cdf462088d13	1055	# content.
markrad	0:cdf462088d13	1056
markrad	0:cdf462088d13	1057	CHM_INDEX_ENCODING =
markrad	0:cdf462088d13	1058
markrad	0:cdf462088d13	1059	# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
markrad	0:cdf462088d13	1060	# controls whether a binary table of contents is generated (YES) or a
markrad	0:cdf462088d13	1061	# normal table of contents (NO) in the .chm file.
markrad	0:cdf462088d13	1062
markrad	0:cdf462088d13	1063	BINARY_TOC = NO
markrad	0:cdf462088d13	1064
markrad	0:cdf462088d13	1065	# The TOC_EXPAND flag can be set to YES to add extra items for group members
markrad	0:cdf462088d13	1066	# to the contents of the HTML help documentation and to the tree view.
markrad	0:cdf462088d13	1067
markrad	0:cdf462088d13	1068	TOC_EXPAND = NO
markrad	0:cdf462088d13	1069
markrad	0:cdf462088d13	1070	# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
markrad	0:cdf462088d13	1071	# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
markrad	0:cdf462088d13	1072	# that can be used as input for Qt's qhelpgenerator to generate a
markrad	0:cdf462088d13	1073	# Qt Compressed Help (.qch) of the generated HTML documentation.
markrad	0:cdf462088d13	1074
markrad	0:cdf462088d13	1075	GENERATE_QHP = NO
markrad	0:cdf462088d13	1076
markrad	0:cdf462088d13	1077	# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
markrad	0:cdf462088d13	1078	# be used to specify the file name of the resulting .qch file.
markrad	0:cdf462088d13	1079	# The path specified is relative to the HTML output folder.
markrad	0:cdf462088d13	1080
markrad	0:cdf462088d13	1081	QCH_FILE =
markrad	0:cdf462088d13	1082
markrad	0:cdf462088d13	1083	# The QHP_NAMESPACE tag specifies the namespace to use when generating
markrad	0:cdf462088d13	1084	# Qt Help Project output. For more information please see
markrad	0:cdf462088d13	1085	# http://doc.trolltech.com/qthelpproject.html#namespace
markrad	0:cdf462088d13	1086
markrad	0:cdf462088d13	1087	QHP_NAMESPACE = org.doxygen.Project
markrad	0:cdf462088d13	1088
markrad	0:cdf462088d13	1089	# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
markrad	0:cdf462088d13	1090	# Qt Help Project output. For more information please see
markrad	0:cdf462088d13	1091	# http://doc.trolltech.com/qthelpproject.html#virtual-folders
markrad	0:cdf462088d13	1092
markrad	0:cdf462088d13	1093	QHP_VIRTUAL_FOLDER = doc
markrad	0:cdf462088d13	1094
markrad	0:cdf462088d13	1095	# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
markrad	0:cdf462088d13	1096	# add. For more information please see
markrad	0:cdf462088d13	1097	# http://doc.trolltech.com/qthelpproject.html#custom-filters
markrad	0:cdf462088d13	1098
markrad	0:cdf462088d13	1099	QHP_CUST_FILTER_NAME =
markrad	0:cdf462088d13	1100
markrad	0:cdf462088d13	1101	# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
markrad	0:cdf462088d13	1102	# custom filter to add. For more information please see
markrad	0:cdf462088d13	1103	# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
markrad	0:cdf462088d13	1104	# Qt Help Project / Custom Filters</a>.
markrad	0:cdf462088d13	1105
markrad	0:cdf462088d13	1106	QHP_CUST_FILTER_ATTRS =
markrad	0:cdf462088d13	1107
markrad	0:cdf462088d13	1108	# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
markrad	0:cdf462088d13	1109	# project's
markrad	0:cdf462088d13	1110	# filter section matches.
markrad	0:cdf462088d13	1111	# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
markrad	0:cdf462088d13	1112	# Qt Help Project / Filter Attributes</a>.
markrad	0:cdf462088d13	1113
markrad	0:cdf462088d13	1114	QHP_SECT_FILTER_ATTRS =
markrad	0:cdf462088d13	1115
markrad	0:cdf462088d13	1116	# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
markrad	0:cdf462088d13	1117	# be used to specify the location of Qt's qhelpgenerator.
markrad	0:cdf462088d13	1118	# If non-empty doxygen will try to run qhelpgenerator on the generated
markrad	0:cdf462088d13	1119	# .qhp file.
markrad	0:cdf462088d13	1120
markrad	0:cdf462088d13	1121	QHG_LOCATION =
markrad	0:cdf462088d13	1122
markrad	0:cdf462088d13	1123	# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
markrad	0:cdf462088d13	1124	# will be generated, which together with the HTML files, form an Eclipse help
markrad	0:cdf462088d13	1125	# plugin. To install this plugin and make it available under the help contents
markrad	0:cdf462088d13	1126	# menu in Eclipse, the contents of the directory containing the HTML and XML
markrad	0:cdf462088d13	1127	# files needs to be copied into the plugins directory of eclipse. The name of
markrad	0:cdf462088d13	1128	# the directory within the plugins directory should be the same as
markrad	0:cdf462088d13	1129	# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
markrad	0:cdf462088d13	1130	# the help appears.
markrad	0:cdf462088d13	1131
markrad	0:cdf462088d13	1132	GENERATE_ECLIPSEHELP = NO
markrad	0:cdf462088d13	1133
markrad	0:cdf462088d13	1134	# A unique identifier for the eclipse help plugin. When installing the plugin
markrad	0:cdf462088d13	1135	# the directory name containing the HTML and XML files should also have
markrad	0:cdf462088d13	1136	# this name.
markrad	0:cdf462088d13	1137
markrad	0:cdf462088d13	1138	ECLIPSE_DOC_ID = org.doxygen.Project
markrad	0:cdf462088d13	1139
markrad	0:cdf462088d13	1140	# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
markrad	0:cdf462088d13	1141	# at top of each HTML page. The value NO (the default) enables the index and
markrad	0:cdf462088d13	1142	# the value YES disables it. Since the tabs have the same information as the
markrad	0:cdf462088d13	1143	# navigation tree you can set this option to NO if you already set
markrad	0:cdf462088d13	1144	# GENERATE_TREEVIEW to YES.
markrad	0:cdf462088d13	1145
markrad	0:cdf462088d13	1146	DISABLE_INDEX = NO
markrad	0:cdf462088d13	1147
markrad	0:cdf462088d13	1148	# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
markrad	0:cdf462088d13	1149	# structure should be generated to display hierarchical information.
markrad	0:cdf462088d13	1150	# If the tag value is set to YES, a side panel will be generated
markrad	0:cdf462088d13	1151	# containing a tree-like index structure (just like the one that
markrad	0:cdf462088d13	1152	# is generated for HTML Help). For this to work a browser that supports
markrad	0:cdf462088d13	1153	# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
markrad	0:cdf462088d13	1154	# Windows users are probably better off using the HTML help feature.
markrad	0:cdf462088d13	1155	# Since the tree basically has the same information as the tab index you
markrad	0:cdf462088d13	1156	# could consider to set DISABLE_INDEX to NO when enabling this option.
markrad	0:cdf462088d13	1157
markrad	0:cdf462088d13	1158	GENERATE_TREEVIEW = NO
markrad	0:cdf462088d13	1159
markrad	0:cdf462088d13	1160	# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
markrad	0:cdf462088d13	1161	# (range [0,1..20]) that doxygen will group on one line in the generated HTML
markrad	0:cdf462088d13	1162	# documentation. Note that a value of 0 will completely suppress the enum
markrad	0:cdf462088d13	1163	# values from appearing in the overview section.
markrad	0:cdf462088d13	1164
markrad	0:cdf462088d13	1165	ENUM_VALUES_PER_LINE = 4
markrad	0:cdf462088d13	1166
markrad	0:cdf462088d13	1167	# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
markrad	0:cdf462088d13	1168	# used to set the initial width (in pixels) of the frame in which the tree
markrad	0:cdf462088d13	1169	# is shown.
markrad	0:cdf462088d13	1170
markrad	0:cdf462088d13	1171	TREEVIEW_WIDTH = 250
markrad	0:cdf462088d13	1172
markrad	0:cdf462088d13	1173	# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
markrad	0:cdf462088d13	1174	# links to external symbols imported via tag files in a separate window.
markrad	0:cdf462088d13	1175
markrad	0:cdf462088d13	1176	EXT_LINKS_IN_WINDOW = NO
markrad	0:cdf462088d13	1177
markrad	0:cdf462088d13	1178	# Use this tag to change the font size of Latex formulas included
markrad	0:cdf462088d13	1179	# as images in the HTML documentation. The default is 10. Note that
markrad	0:cdf462088d13	1180	# when you change the font size after a successful doxygen run you need
markrad	0:cdf462088d13	1181	# to manually remove any form_*.png images from the HTML output directory
markrad	0:cdf462088d13	1182	# to force them to be regenerated.
markrad	0:cdf462088d13	1183
markrad	0:cdf462088d13	1184	FORMULA_FONTSIZE = 10
markrad	0:cdf462088d13	1185
markrad	0:cdf462088d13	1186	# Use the FORMULA_TRANPARENT tag to determine whether or not the images
markrad	0:cdf462088d13	1187	# generated for formulas are transparent PNGs. Transparent PNGs are
markrad	0:cdf462088d13	1188	# not supported properly for IE 6.0, but are supported on all modern browsers.
markrad	0:cdf462088d13	1189	# Note that when changing this option you need to delete any form_*.png files
markrad	0:cdf462088d13	1190	# in the HTML output before the changes have effect.
markrad	0:cdf462088d13	1191
markrad	0:cdf462088d13	1192	FORMULA_TRANSPARENT = YES
markrad	0:cdf462088d13	1193
markrad	0:cdf462088d13	1194	# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
markrad	0:cdf462088d13	1195	# (see http://www.mathjax.org) which uses client side Javascript for the
markrad	0:cdf462088d13	1196	# rendering instead of using prerendered bitmaps. Use this if you do not
markrad	0:cdf462088d13	1197	# have LaTeX installed or if you want to formulas look prettier in the HTML
markrad	0:cdf462088d13	1198	# output. When enabled you may also need to install MathJax separately and
markrad	0:cdf462088d13	1199	# configure the path to it using the MATHJAX_RELPATH option.
markrad	0:cdf462088d13	1200
markrad	0:cdf462088d13	1201	USE_MATHJAX = NO
markrad	0:cdf462088d13	1202
markrad	0:cdf462088d13	1203	# When MathJax is enabled you can set the default output format to be used for
markrad	0:cdf462088d13	1204	# the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and
markrad	0:cdf462088d13	1205	# SVG. The default value is HTML-CSS, which is slower, but has the best
markrad	0:cdf462088d13	1206	# compatibility.
markrad	0:cdf462088d13	1207
markrad	0:cdf462088d13	1208	MATHJAX_FORMAT = HTML-CSS
markrad	0:cdf462088d13	1209
markrad	0:cdf462088d13	1210	# When MathJax is enabled you need to specify the location relative to the
markrad	0:cdf462088d13	1211	# HTML output directory using the MATHJAX_RELPATH option. The destination
markrad	0:cdf462088d13	1212	# directory should contain the MathJax.js script. For instance, if the mathjax
markrad	0:cdf462088d13	1213	# directory is located at the same level as the HTML output directory, then
markrad	0:cdf462088d13	1214	# MATHJAX_RELPATH should be ../mathjax. The default value points to
markrad	0:cdf462088d13	1215	# the MathJax Content Delivery Network so you can quickly see the result without
markrad	0:cdf462088d13	1216	# installing MathJax.
markrad	0:cdf462088d13	1217	# However, it is strongly recommended to install a local
markrad	0:cdf462088d13	1218	# copy of MathJax from http://www.mathjax.org before deployment.
markrad	0:cdf462088d13	1219
markrad	0:cdf462088d13	1220	MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
markrad	0:cdf462088d13	1221
markrad	0:cdf462088d13	1222	# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
markrad	0:cdf462088d13	1223	# names that should be enabled during MathJax rendering.
markrad	0:cdf462088d13	1224
markrad	0:cdf462088d13	1225	MATHJAX_EXTENSIONS =
markrad	0:cdf462088d13	1226
markrad	0:cdf462088d13	1227	# The MATHJAX_CODEFILE tag can be used to specify a file with javascript
markrad	0:cdf462088d13	1228	# pieces of code that will be used on startup of the MathJax code.
markrad	0:cdf462088d13	1229
markrad	0:cdf462088d13	1230	MATHJAX_CODEFILE =
markrad	0:cdf462088d13	1231
markrad	0:cdf462088d13	1232	# When the SEARCHENGINE tag is enabled doxygen will generate a search box
markrad	0:cdf462088d13	1233	# for the HTML output. The underlying search engine uses javascript
markrad	0:cdf462088d13	1234	# and DHTML and should work on any modern browser. Note that when using
markrad	0:cdf462088d13	1235	# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
markrad	0:cdf462088d13	1236	# (GENERATE_DOCSET) there is already a search function so this one should
markrad	0:cdf462088d13	1237	# typically be disabled. For large projects the javascript based search engine
markrad	0:cdf462088d13	1238	# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
markrad	0:cdf462088d13	1239
markrad	0:cdf462088d13	1240	SEARCHENGINE = NO
markrad	0:cdf462088d13	1241
markrad	0:cdf462088d13	1242	# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
markrad	0:cdf462088d13	1243	# implemented using a web server instead of a web client using Javascript.
markrad	0:cdf462088d13	1244	# There are two flavours of web server based search depending on the
markrad	0:cdf462088d13	1245	# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
markrad	0:cdf462088d13	1246	# searching and an index file used by the script. When EXTERNAL_SEARCH is
markrad	0:cdf462088d13	1247	# enabled the indexing and searching needs to be provided by external tools.
markrad	0:cdf462088d13	1248	# See the manual for details.
markrad	0:cdf462088d13	1249
markrad	0:cdf462088d13	1250	SERVER_BASED_SEARCH = NO
markrad	0:cdf462088d13	1251
markrad	0:cdf462088d13	1252	# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP
markrad	0:cdf462088d13	1253	# script for searching. Instead the search results are written to an XML file
markrad	0:cdf462088d13	1254	# which needs to be processed by an external indexer. Doxygen will invoke an
markrad	0:cdf462088d13	1255	# external search engine pointed to by the SEARCHENGINE_URL option to obtain
markrad	0:cdf462088d13	1256	# the search results. Doxygen ships with an example indexer (doxyindexer) and
markrad	0:cdf462088d13	1257	# search engine (doxysearch.cgi) which are based on the open source search
markrad	0:cdf462088d13	1258	# engine library Xapian. See the manual for configuration details.
markrad	0:cdf462088d13	1259
markrad	0:cdf462088d13	1260	EXTERNAL_SEARCH = NO
markrad	0:cdf462088d13	1261
markrad	0:cdf462088d13	1262	# The SEARCHENGINE_URL should point to a search engine hosted by a web server
markrad	0:cdf462088d13	1263	# which will returned the search results when EXTERNAL_SEARCH is enabled.
markrad	0:cdf462088d13	1264	# Doxygen ships with an example search engine (doxysearch) which is based on
markrad	0:cdf462088d13	1265	# the open source search engine library Xapian. See the manual for configuration
markrad	0:cdf462088d13	1266	# details.
markrad	0:cdf462088d13	1267
markrad	0:cdf462088d13	1268	SEARCHENGINE_URL =
markrad	0:cdf462088d13	1269
markrad	0:cdf462088d13	1270	# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
markrad	0:cdf462088d13	1271	# search data is written to a file for indexing by an external tool. With the
markrad	0:cdf462088d13	1272	# SEARCHDATA_FILE tag the name of this file can be specified.
markrad	0:cdf462088d13	1273
markrad	0:cdf462088d13	1274	SEARCHDATA_FILE = searchdata.xml
markrad	0:cdf462088d13	1275
markrad	0:cdf462088d13	1276	# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the
markrad	0:cdf462088d13	1277	# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
markrad	0:cdf462088d13	1278	# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
markrad	0:cdf462088d13	1279	# projects and redirect the results back to the right project.
markrad	0:cdf462088d13	1280
markrad	0:cdf462088d13	1281	EXTERNAL_SEARCH_ID =
markrad	0:cdf462088d13	1282
markrad	0:cdf462088d13	1283	# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
markrad	0:cdf462088d13	1284	# projects other than the one defined by this configuration file, but that are
markrad	0:cdf462088d13	1285	# all added to the same external search index. Each project needs to have a
markrad	0:cdf462088d13	1286	# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id
markrad	0:cdf462088d13	1287	# of to a relative location where the documentation can be found.
markrad	0:cdf462088d13	1288	# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ...
markrad	0:cdf462088d13	1289
markrad	0:cdf462088d13	1290	EXTRA_SEARCH_MAPPINGS =
markrad	0:cdf462088d13	1291
markrad	0:cdf462088d13	1292	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1293	# configuration options related to the LaTeX output
markrad	0:cdf462088d13	1294	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1295
markrad	0:cdf462088d13	1296	# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	1297	# generate Latex output.
markrad	0:cdf462088d13	1298
markrad	0:cdf462088d13	1299	GENERATE_LATEX = NO
markrad	0:cdf462088d13	1300
markrad	0:cdf462088d13	1301	# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
markrad	0:cdf462088d13	1302	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
markrad	0:cdf462088d13	1303	# put in front of it. If left blank `latex' will be used as the default path.
markrad	0:cdf462088d13	1304
markrad	0:cdf462088d13	1305	LATEX_OUTPUT = latex
markrad	0:cdf462088d13	1306
markrad	0:cdf462088d13	1307	# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
markrad	0:cdf462088d13	1308	# invoked. If left blank `latex' will be used as the default command name.
markrad	0:cdf462088d13	1309	# Note that when enabling USE_PDFLATEX this option is only used for
markrad	0:cdf462088d13	1310	# generating bitmaps for formulas in the HTML output, but not in the
markrad	0:cdf462088d13	1311	# Makefile that is written to the output directory.
markrad	0:cdf462088d13	1312
markrad	0:cdf462088d13	1313	LATEX_CMD_NAME = latex
markrad	0:cdf462088d13	1314
markrad	0:cdf462088d13	1315	# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
markrad	0:cdf462088d13	1316	# generate index for LaTeX. If left blank `makeindex' will be used as the
markrad	0:cdf462088d13	1317	# default command name.
markrad	0:cdf462088d13	1318
markrad	0:cdf462088d13	1319	MAKEINDEX_CMD_NAME = makeindex
markrad	0:cdf462088d13	1320
markrad	0:cdf462088d13	1321	# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
markrad	0:cdf462088d13	1322	# LaTeX documents. This may be useful for small projects and may help to
markrad	0:cdf462088d13	1323	# save some trees in general.
markrad	0:cdf462088d13	1324
markrad	0:cdf462088d13	1325	COMPACT_LATEX = YES
markrad	0:cdf462088d13	1326
markrad	0:cdf462088d13	1327	# The PAPER_TYPE tag can be used to set the paper type that is used
markrad	0:cdf462088d13	1328	# by the printer. Possible values are: a4, letter, legal and
markrad	0:cdf462088d13	1329	# executive. If left blank a4 will be used.
markrad	0:cdf462088d13	1330
markrad	0:cdf462088d13	1331	PAPER_TYPE = a4wide
markrad	0:cdf462088d13	1332
markrad	0:cdf462088d13	1333	# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
markrad	0:cdf462088d13	1334	# packages that should be included in the LaTeX output.
markrad	0:cdf462088d13	1335
markrad	0:cdf462088d13	1336	EXTRA_PACKAGES =
markrad	0:cdf462088d13	1337
markrad	0:cdf462088d13	1338	# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
markrad	0:cdf462088d13	1339	# the generated latex document. The header should contain everything until
markrad	0:cdf462088d13	1340	# the first chapter. If it is left blank doxygen will generate a
markrad	0:cdf462088d13	1341	# standard header. Notice: only use this tag if you know what you are doing!
markrad	0:cdf462088d13	1342
markrad	0:cdf462088d13	1343	LATEX_HEADER =
markrad	0:cdf462088d13	1344
markrad	0:cdf462088d13	1345	# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
markrad	0:cdf462088d13	1346	# the generated latex document. The footer should contain everything after
markrad	0:cdf462088d13	1347	# the last chapter. If it is left blank doxygen will generate a
markrad	0:cdf462088d13	1348	# standard footer. Notice: only use this tag if you know what you are doing!
markrad	0:cdf462088d13	1349
markrad	0:cdf462088d13	1350	LATEX_FOOTER =
markrad	0:cdf462088d13	1351
markrad	0:cdf462088d13	1352	# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images
markrad	0:cdf462088d13	1353	# or other source files which should be copied to the LaTeX output directory.
markrad	0:cdf462088d13	1354	# Note that the files will be copied as-is; there are no commands or markers
markrad	0:cdf462088d13	1355	# available.
markrad	0:cdf462088d13	1356
markrad	0:cdf462088d13	1357	LATEX_EXTRA_FILES =
markrad	0:cdf462088d13	1358
markrad	0:cdf462088d13	1359	# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
markrad	0:cdf462088d13	1360	# is prepared for conversion to pdf (using ps2pdf). The pdf file will
markrad	0:cdf462088d13	1361	# contain links (just like the HTML output) instead of page references
markrad	0:cdf462088d13	1362	# This makes the output suitable for online browsing using a pdf viewer.
markrad	0:cdf462088d13	1363
markrad	0:cdf462088d13	1364	PDF_HYPERLINKS = YES
markrad	0:cdf462088d13	1365
markrad	0:cdf462088d13	1366	# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
markrad	0:cdf462088d13	1367	# plain latex in the generated Makefile. Set this option to YES to get a
markrad	0:cdf462088d13	1368	# higher quality PDF documentation.
markrad	0:cdf462088d13	1369
markrad	0:cdf462088d13	1370	USE_PDFLATEX = YES
markrad	0:cdf462088d13	1371
markrad	0:cdf462088d13	1372	# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
markrad	0:cdf462088d13	1373	# command to the generated LaTeX files. This will instruct LaTeX to keep
markrad	0:cdf462088d13	1374	# running if errors occur, instead of asking the user for help.
markrad	0:cdf462088d13	1375	# This option is also used when generating formulas in HTML.
markrad	0:cdf462088d13	1376
markrad	0:cdf462088d13	1377	LATEX_BATCHMODE = NO
markrad	0:cdf462088d13	1378
markrad	0:cdf462088d13	1379	# If LATEX_HIDE_INDICES is set to YES then doxygen will not
markrad	0:cdf462088d13	1380	# include the index chapters (such as File Index, Compound Index, etc.)
markrad	0:cdf462088d13	1381	# in the output.
markrad	0:cdf462088d13	1382
markrad	0:cdf462088d13	1383	LATEX_HIDE_INDICES = NO
markrad	0:cdf462088d13	1384
markrad	0:cdf462088d13	1385	# If LATEX_SOURCE_CODE is set to YES then doxygen will include
markrad	0:cdf462088d13	1386	# source code with syntax highlighting in the LaTeX output.
markrad	0:cdf462088d13	1387	# Note that which sources are shown also depends on other settings
markrad	0:cdf462088d13	1388	# such as SOURCE_BROWSER.
markrad	0:cdf462088d13	1389
markrad	0:cdf462088d13	1390	LATEX_SOURCE_CODE = NO
markrad	0:cdf462088d13	1391
markrad	0:cdf462088d13	1392	# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
markrad	0:cdf462088d13	1393	# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
markrad	0:cdf462088d13	1394	# http://en.wikipedia.org/wiki/BibTeX for more info.
markrad	0:cdf462088d13	1395
markrad	0:cdf462088d13	1396	LATEX_BIB_STYLE = plain
markrad	0:cdf462088d13	1397
markrad	0:cdf462088d13	1398	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1399	# configuration options related to the RTF output
markrad	0:cdf462088d13	1400	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1401
markrad	0:cdf462088d13	1402	# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
markrad	0:cdf462088d13	1403	# The RTF output is optimized for Word 97 and may not look very pretty with
markrad	0:cdf462088d13	1404	# other RTF readers or editors.
markrad	0:cdf462088d13	1405
markrad	0:cdf462088d13	1406	GENERATE_RTF = NO
markrad	0:cdf462088d13	1407
markrad	0:cdf462088d13	1408	# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
markrad	0:cdf462088d13	1409	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
markrad	0:cdf462088d13	1410	# put in front of it. If left blank `rtf' will be used as the default path.
markrad	0:cdf462088d13	1411
markrad	0:cdf462088d13	1412	RTF_OUTPUT = rtf
markrad	0:cdf462088d13	1413
markrad	0:cdf462088d13	1414	# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
markrad	0:cdf462088d13	1415	# RTF documents. This may be useful for small projects and may help to
markrad	0:cdf462088d13	1416	# save some trees in general.
markrad	0:cdf462088d13	1417
markrad	0:cdf462088d13	1418	COMPACT_RTF = NO
markrad	0:cdf462088d13	1419
markrad	0:cdf462088d13	1420	# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
markrad	0:cdf462088d13	1421	# will contain hyperlink fields. The RTF file will
markrad	0:cdf462088d13	1422	# contain links (just like the HTML output) instead of page references.
markrad	0:cdf462088d13	1423	# This makes the output suitable for online browsing using WORD or other
markrad	0:cdf462088d13	1424	# programs which support those fields.
markrad	0:cdf462088d13	1425	# Note: wordpad (write) and others do not support links.
markrad	0:cdf462088d13	1426
markrad	0:cdf462088d13	1427	RTF_HYPERLINKS = NO
markrad	0:cdf462088d13	1428
markrad	0:cdf462088d13	1429	# Load style sheet definitions from file. Syntax is similar to doxygen's
markrad	0:cdf462088d13	1430	# config file, i.e. a series of assignments. You only have to provide
markrad	0:cdf462088d13	1431	# replacements, missing definitions are set to their default value.
markrad	0:cdf462088d13	1432
markrad	0:cdf462088d13	1433	RTF_STYLESHEET_FILE =
markrad	0:cdf462088d13	1434
markrad	0:cdf462088d13	1435	# Set optional variables used in the generation of an rtf document.
markrad	0:cdf462088d13	1436	# Syntax is similar to doxygen's config file.
markrad	0:cdf462088d13	1437
markrad	0:cdf462088d13	1438	RTF_EXTENSIONS_FILE =
markrad	0:cdf462088d13	1439
markrad	0:cdf462088d13	1440	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1441	# configuration options related to the man page output
markrad	0:cdf462088d13	1442	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1443
markrad	0:cdf462088d13	1444	# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	1445	# generate man pages
markrad	0:cdf462088d13	1446
markrad	0:cdf462088d13	1447	GENERATE_MAN = NO
markrad	0:cdf462088d13	1448
markrad	0:cdf462088d13	1449	# The MAN_OUTPUT tag is used to specify where the man pages will be put.
markrad	0:cdf462088d13	1450	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
markrad	0:cdf462088d13	1451	# put in front of it. If left blank `man' will be used as the default path.
markrad	0:cdf462088d13	1452
markrad	0:cdf462088d13	1453	MAN_OUTPUT = man
markrad	0:cdf462088d13	1454
markrad	0:cdf462088d13	1455	# The MAN_EXTENSION tag determines the extension that is added to
markrad	0:cdf462088d13	1456	# the generated man pages (default is the subroutine's section .3)
markrad	0:cdf462088d13	1457
markrad	0:cdf462088d13	1458	MAN_EXTENSION = .3
markrad	0:cdf462088d13	1459
markrad	0:cdf462088d13	1460	# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
markrad	0:cdf462088d13	1461	# then it will generate one additional man file for each entity
markrad	0:cdf462088d13	1462	# documented in the real man page(s). These additional files
markrad	0:cdf462088d13	1463	# only source the real man page, but without them the man command
markrad	0:cdf462088d13	1464	# would be unable to find the correct page. The default is NO.
markrad	0:cdf462088d13	1465
markrad	0:cdf462088d13	1466	MAN_LINKS = NO
markrad	0:cdf462088d13	1467
markrad	0:cdf462088d13	1468	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1469	# configuration options related to the XML output
markrad	0:cdf462088d13	1470	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1471
markrad	0:cdf462088d13	1472	# If the GENERATE_XML tag is set to YES Doxygen will
markrad	0:cdf462088d13	1473	# generate an XML file that captures the structure of
markrad	0:cdf462088d13	1474	# the code including all documentation.
markrad	0:cdf462088d13	1475
markrad	0:cdf462088d13	1476	GENERATE_XML = NO
markrad	0:cdf462088d13	1477
markrad	0:cdf462088d13	1478	# The XML_OUTPUT tag is used to specify where the XML pages will be put.
markrad	0:cdf462088d13	1479	# If a relative path is entered the value of OUTPUT_DIRECTORY will be
markrad	0:cdf462088d13	1480	# put in front of it. If left blank `xml' will be used as the default path.
markrad	0:cdf462088d13	1481
markrad	0:cdf462088d13	1482	XML_OUTPUT = xml
markrad	0:cdf462088d13	1483
markrad	0:cdf462088d13	1484	# The XML_SCHEMA tag can be used to specify an XML schema,
markrad	0:cdf462088d13	1485	# which can be used by a validating XML parser to check the
markrad	0:cdf462088d13	1486	# syntax of the XML files.
markrad	0:cdf462088d13	1487
markrad	0:cdf462088d13	1488	#XML_SCHEMA =
markrad	0:cdf462088d13	1489
markrad	0:cdf462088d13	1490	# The XML_DTD tag can be used to specify an XML DTD,
markrad	0:cdf462088d13	1491	# which can be used by a validating XML parser to check the
markrad	0:cdf462088d13	1492	# syntax of the XML files.
markrad	0:cdf462088d13	1493
markrad	0:cdf462088d13	1494	#XML_DTD =
markrad	0:cdf462088d13	1495
markrad	0:cdf462088d13	1496	# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
markrad	0:cdf462088d13	1497	# dump the program listings (including syntax highlighting
markrad	0:cdf462088d13	1498	# and cross-referencing information) to the XML output. Note that
markrad	0:cdf462088d13	1499	# enabling this will significantly increase the size of the XML output.
markrad	0:cdf462088d13	1500
markrad	0:cdf462088d13	1501	XML_PROGRAMLISTING = YES
markrad	0:cdf462088d13	1502
markrad	0:cdf462088d13	1503	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1504	# configuration options related to the DOCBOOK output
markrad	0:cdf462088d13	1505	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1506
markrad	0:cdf462088d13	1507	# If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files
markrad	0:cdf462088d13	1508	# that can be used to generate PDF.
markrad	0:cdf462088d13	1509
markrad	0:cdf462088d13	1510	GENERATE_DOCBOOK = NO
markrad	0:cdf462088d13	1511
markrad	0:cdf462088d13	1512	# The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.
markrad	0:cdf462088d13	1513	# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
markrad	0:cdf462088d13	1514	# front of it. If left blank docbook will be used as the default path.
markrad	0:cdf462088d13	1515
markrad	0:cdf462088d13	1516	DOCBOOK_OUTPUT = docbook
markrad	0:cdf462088d13	1517
markrad	0:cdf462088d13	1518	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1519	# configuration options for the AutoGen Definitions output
markrad	0:cdf462088d13	1520	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1521
markrad	0:cdf462088d13	1522	# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
markrad	0:cdf462088d13	1523	# generate an AutoGen Definitions (see autogen.sf.net) file
markrad	0:cdf462088d13	1524	# that captures the structure of the code including all
markrad	0:cdf462088d13	1525	# documentation. Note that this feature is still experimental
markrad	0:cdf462088d13	1526	# and incomplete at the moment.
markrad	0:cdf462088d13	1527
markrad	0:cdf462088d13	1528	GENERATE_AUTOGEN_DEF = NO
markrad	0:cdf462088d13	1529
markrad	0:cdf462088d13	1530	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1531	# configuration options related to the Perl module output
markrad	0:cdf462088d13	1532	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1533
markrad	0:cdf462088d13	1534	# If the GENERATE_PERLMOD tag is set to YES Doxygen will
markrad	0:cdf462088d13	1535	# generate a Perl module file that captures the structure of
markrad	0:cdf462088d13	1536	# the code including all documentation. Note that this
markrad	0:cdf462088d13	1537	# feature is still experimental and incomplete at the
markrad	0:cdf462088d13	1538	# moment.
markrad	0:cdf462088d13	1539
markrad	0:cdf462088d13	1540	GENERATE_PERLMOD = NO
markrad	0:cdf462088d13	1541
markrad	0:cdf462088d13	1542	# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
markrad	0:cdf462088d13	1543	# the necessary Makefile rules, Perl scripts and LaTeX code to be able
markrad	0:cdf462088d13	1544	# to generate PDF and DVI output from the Perl module output.
markrad	0:cdf462088d13	1545
markrad	0:cdf462088d13	1546	PERLMOD_LATEX = NO
markrad	0:cdf462088d13	1547
markrad	0:cdf462088d13	1548	# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
markrad	0:cdf462088d13	1549	# nicely formatted so it can be parsed by a human reader.
markrad	0:cdf462088d13	1550	# This is useful
markrad	0:cdf462088d13	1551	# if you want to understand what is going on.
markrad	0:cdf462088d13	1552	# On the other hand, if this
markrad	0:cdf462088d13	1553	# tag is set to NO the size of the Perl module output will be much smaller
markrad	0:cdf462088d13	1554	# and Perl will parse it just the same.
markrad	0:cdf462088d13	1555
markrad	0:cdf462088d13	1556	PERLMOD_PRETTY = YES
markrad	0:cdf462088d13	1557
markrad	0:cdf462088d13	1558	# The names of the make variables in the generated doxyrules.make file
markrad	0:cdf462088d13	1559	# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
markrad	0:cdf462088d13	1560	# This is useful so different doxyrules.make files included by the same
markrad	0:cdf462088d13	1561	# Makefile don't overwrite each other's variables.
markrad	0:cdf462088d13	1562
markrad	0:cdf462088d13	1563	PERLMOD_MAKEVAR_PREFIX =
markrad	0:cdf462088d13	1564
markrad	0:cdf462088d13	1565	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1566	# Configuration options related to the preprocessor
markrad	0:cdf462088d13	1567	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1568
markrad	0:cdf462088d13	1569	# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	1570	# evaluate all C-preprocessor directives found in the sources and include
markrad	0:cdf462088d13	1571	# files.
markrad	0:cdf462088d13	1572
markrad	0:cdf462088d13	1573	ENABLE_PREPROCESSING = YES
markrad	0:cdf462088d13	1574
markrad	0:cdf462088d13	1575	# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
markrad	0:cdf462088d13	1576	# names in the source code. If set to NO (the default) only conditional
markrad	0:cdf462088d13	1577	# compilation will be performed. Macro expansion can be done in a controlled
markrad	0:cdf462088d13	1578	# way by setting EXPAND_ONLY_PREDEF to YES.
markrad	0:cdf462088d13	1579
markrad	0:cdf462088d13	1580	MACRO_EXPANSION = NO
markrad	0:cdf462088d13	1581
markrad	0:cdf462088d13	1582	# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
markrad	0:cdf462088d13	1583	# then the macro expansion is limited to the macros specified with the
markrad	0:cdf462088d13	1584	# PREDEFINED and EXPAND_AS_DEFINED tags.
markrad	0:cdf462088d13	1585
markrad	0:cdf462088d13	1586	EXPAND_ONLY_PREDEF = NO
markrad	0:cdf462088d13	1587
markrad	0:cdf462088d13	1588	# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
markrad	0:cdf462088d13	1589	# pointed to by INCLUDE_PATH will be searched when a #include is found.
markrad	0:cdf462088d13	1590
markrad	0:cdf462088d13	1591	SEARCH_INCLUDES = YES
markrad	0:cdf462088d13	1592
markrad	0:cdf462088d13	1593	# The INCLUDE_PATH tag can be used to specify one or more directories that
markrad	0:cdf462088d13	1594	# contain include files that are not input files but should be processed by
markrad	0:cdf462088d13	1595	# the preprocessor.
markrad	0:cdf462088d13	1596
markrad	0:cdf462088d13	1597	INCLUDE_PATH =
markrad	0:cdf462088d13	1598
markrad	0:cdf462088d13	1599	# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
markrad	0:cdf462088d13	1600	# patterns (like .h and .hpp) to filter out the header-files in the
markrad	0:cdf462088d13	1601	# directories. If left blank, the patterns specified with FILE_PATTERNS will
markrad	0:cdf462088d13	1602	# be used.
markrad	0:cdf462088d13	1603
markrad	0:cdf462088d13	1604	INCLUDE_FILE_PATTERNS =
markrad	0:cdf462088d13	1605
markrad	0:cdf462088d13	1606	# The PREDEFINED tag can be used to specify one or more macro names that
markrad	0:cdf462088d13	1607	# are defined before the preprocessor is started (similar to the -D option of
markrad	0:cdf462088d13	1608	# gcc). The argument of the tag is a list of macros of the form: name
markrad	0:cdf462088d13	1609	# or name=definition (no spaces). If the definition and the = are
markrad	0:cdf462088d13	1610	# omitted =1 is assumed. To prevent a macro definition from being
markrad	0:cdf462088d13	1611	# undefined via #undef or recursively expanded use the := operator
markrad	0:cdf462088d13	1612	# instead of the = operator.
markrad	0:cdf462088d13	1613
markrad	0:cdf462088d13	1614	PREDEFINED = WIN32 \
markrad	0:cdf462088d13	1615	NTLM \
markrad	0:cdf462088d13	1616	USE_LZO \
markrad	0:cdf462088d13	1617	ENABLE_FRAGMENT \
markrad	0:cdf462088d13	1618	P2MP \
markrad	0:cdf462088d13	1619	P2MP_SERVER \
markrad	0:cdf462088d13	1620	USE_CRYPTO \
markrad	0:cdf462088d13	1621	USE_SSL \
markrad	0:cdf462088d13	1622	ENABLE_PLUGIN \
markrad	0:cdf462088d13	1623	ENABLE_MANAGEMENT \
markrad	0:cdf462088d13	1624	ENABLE_OCC \
markrad	0:cdf462088d13	1625	HAVE_GETTIMEOFDAY
markrad	0:cdf462088d13	1626
markrad	0:cdf462088d13	1627	# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
markrad	0:cdf462088d13	1628	# this tag can be used to specify a list of macro names that should be expanded.
markrad	0:cdf462088d13	1629	# The macro definition that is found in the sources will be used.
markrad	0:cdf462088d13	1630	# Use the PREDEFINED tag if you want to use a different macro definition that
markrad	0:cdf462088d13	1631	# overrules the definition found in the source code.
markrad	0:cdf462088d13	1632
markrad	0:cdf462088d13	1633	EXPAND_AS_DEFINED =
markrad	0:cdf462088d13	1634
markrad	0:cdf462088d13	1635	# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
markrad	0:cdf462088d13	1636	# doxygen's preprocessor will remove all references to function-like macros
markrad	0:cdf462088d13	1637	# that are alone on a line, have an all uppercase name, and do not end with a
markrad	0:cdf462088d13	1638	# semicolon, because these will confuse the parser if not removed.
markrad	0:cdf462088d13	1639
markrad	0:cdf462088d13	1640	SKIP_FUNCTION_MACROS = YES
markrad	0:cdf462088d13	1641
markrad	0:cdf462088d13	1642	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1643	# Configuration::additions related to external references
markrad	0:cdf462088d13	1644	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1645
markrad	0:cdf462088d13	1646	# The TAGFILES option can be used to specify one or more tagfiles. For each
markrad	0:cdf462088d13	1647	# tag file the location of the external documentation should be added. The
markrad	0:cdf462088d13	1648	# format of a tag file without this location is as follows:
markrad	0:cdf462088d13	1649	#
markrad	0:cdf462088d13	1650	# TAGFILES = file1 file2 ...
markrad	0:cdf462088d13	1651	# Adding location for the tag files is done as follows:
markrad	0:cdf462088d13	1652	#
markrad	0:cdf462088d13	1653	# TAGFILES = file1=loc1 "file2 = loc2" ...
markrad	0:cdf462088d13	1654	# where "loc1" and "loc2" can be relative or absolute paths
markrad	0:cdf462088d13	1655	# or URLs. Note that each tag file must have a unique name (where the name does
markrad	0:cdf462088d13	1656	# NOT include the path). If a tag file is not located in the directory in which
markrad	0:cdf462088d13	1657	# doxygen is run, you must also specify the path to the tagfile here.
markrad	0:cdf462088d13	1658
markrad	0:cdf462088d13	1659	TAGFILES =
markrad	0:cdf462088d13	1660
markrad	0:cdf462088d13	1661	# When a file name is specified after GENERATE_TAGFILE, doxygen will create
markrad	0:cdf462088d13	1662	# a tag file that is based on the input files it reads.
markrad	0:cdf462088d13	1663
markrad	0:cdf462088d13	1664	GENERATE_TAGFILE =
markrad	0:cdf462088d13	1665
markrad	0:cdf462088d13	1666	# If the ALLEXTERNALS tag is set to YES all external classes will be listed
markrad	0:cdf462088d13	1667	# in the class index. If set to NO only the inherited external classes
markrad	0:cdf462088d13	1668	# will be listed.
markrad	0:cdf462088d13	1669
markrad	0:cdf462088d13	1670	ALLEXTERNALS = NO
markrad	0:cdf462088d13	1671
markrad	0:cdf462088d13	1672	# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
markrad	0:cdf462088d13	1673	# in the modules index. If set to NO, only the current project's groups will
markrad	0:cdf462088d13	1674	# be listed.
markrad	0:cdf462088d13	1675
markrad	0:cdf462088d13	1676	EXTERNAL_GROUPS = YES
markrad	0:cdf462088d13	1677
markrad	0:cdf462088d13	1678	# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed
markrad	0:cdf462088d13	1679	# in the related pages index. If set to NO, only the current project's
markrad	0:cdf462088d13	1680	# pages will be listed.
markrad	0:cdf462088d13	1681
markrad	0:cdf462088d13	1682	EXTERNAL_PAGES = YES
markrad	0:cdf462088d13	1683
markrad	0:cdf462088d13	1684	# The PERL_PATH should be the absolute path and name of the perl script
markrad	0:cdf462088d13	1685	# interpreter (i.e. the result of `which perl').
markrad	0:cdf462088d13	1686
markrad	0:cdf462088d13	1687	PERL_PATH = /usr/bin/perl
markrad	0:cdf462088d13	1688
markrad	0:cdf462088d13	1689	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1690	# Configuration options related to the dot tool
markrad	0:cdf462088d13	1691	#---------------------------------------------------------------------------
markrad	0:cdf462088d13	1692
markrad	0:cdf462088d13	1693	# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	1694	# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
markrad	0:cdf462088d13	1695	# or super classes. Setting the tag to NO turns the diagrams off. Note that
markrad	0:cdf462088d13	1696	# this option also works with HAVE_DOT disabled, but it is recommended to
markrad	0:cdf462088d13	1697	# install and use dot, since it yields more powerful graphs.
markrad	0:cdf462088d13	1698
markrad	0:cdf462088d13	1699	CLASS_DIAGRAMS = NO
markrad	0:cdf462088d13	1700
markrad	0:cdf462088d13	1701	# You can define message sequence charts within doxygen comments using the \msc
markrad	0:cdf462088d13	1702	# command. Doxygen will then run the mscgen tool (see
markrad	0:cdf462088d13	1703	# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
markrad	0:cdf462088d13	1704	# documentation. The MSCGEN_PATH tag allows you to specify the directory where
markrad	0:cdf462088d13	1705	# the mscgen tool resides. If left empty the tool is assumed to be found in the
markrad	0:cdf462088d13	1706	# default search path.
markrad	0:cdf462088d13	1707
markrad	0:cdf462088d13	1708	MSCGEN_PATH =
markrad	0:cdf462088d13	1709
markrad	0:cdf462088d13	1710	# If set to YES, the inheritance and collaboration graphs will hide
markrad	0:cdf462088d13	1711	# inheritance and usage relations if the target is undocumented
markrad	0:cdf462088d13	1712	# or is not a class.
markrad	0:cdf462088d13	1713
markrad	0:cdf462088d13	1714	HIDE_UNDOC_RELATIONS = YES
markrad	0:cdf462088d13	1715
markrad	0:cdf462088d13	1716	# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
markrad	0:cdf462088d13	1717	# available from the path. This tool is part of Graphviz, a graph visualization
markrad	0:cdf462088d13	1718	# toolkit from AT&T and Lucent Bell Labs. The other options in this section
markrad	0:cdf462088d13	1719	# have no effect if this option is set to NO (the default)
markrad	0:cdf462088d13	1720
markrad	0:cdf462088d13	1721	HAVE_DOT = YES
markrad	0:cdf462088d13	1722
markrad	0:cdf462088d13	1723	# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
markrad	0:cdf462088d13	1724	# allowed to run in parallel. When set to 0 (the default) doxygen will
markrad	0:cdf462088d13	1725	# base this on the number of processors available in the system. You can set it
markrad	0:cdf462088d13	1726	# explicitly to a value larger than 0 to get control over the balance
markrad	0:cdf462088d13	1727	# between CPU load and processing speed.
markrad	0:cdf462088d13	1728
markrad	0:cdf462088d13	1729	DOT_NUM_THREADS = 0
markrad	0:cdf462088d13	1730
markrad	0:cdf462088d13	1731	# By default doxygen will use the Helvetica font for all dot files that
markrad	0:cdf462088d13	1732	# doxygen generates. When you want a differently looking font you can specify
markrad	0:cdf462088d13	1733	# the font name using DOT_FONTNAME. You need to make sure dot is able to find
markrad	0:cdf462088d13	1734	# the font, which can be done by putting it in a standard location or by setting
markrad	0:cdf462088d13	1735	# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
markrad	0:cdf462088d13	1736	# directory containing the font.
markrad	0:cdf462088d13	1737
markrad	0:cdf462088d13	1738	DOT_FONTNAME = Helvetica
markrad	0:cdf462088d13	1739
markrad	0:cdf462088d13	1740	# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
markrad	0:cdf462088d13	1741	# The default size is 10pt.
markrad	0:cdf462088d13	1742
markrad	0:cdf462088d13	1743	DOT_FONTSIZE = 10
markrad	0:cdf462088d13	1744
markrad	0:cdf462088d13	1745	# By default doxygen will tell dot to use the Helvetica font.
markrad	0:cdf462088d13	1746	# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
markrad	0:cdf462088d13	1747	# set the path where dot can find it.
markrad	0:cdf462088d13	1748
markrad	0:cdf462088d13	1749	DOT_FONTPATH =
markrad	0:cdf462088d13	1750
markrad	0:cdf462088d13	1751	# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
markrad	0:cdf462088d13	1752	# will generate a graph for each documented class showing the direct and
markrad	0:cdf462088d13	1753	# indirect inheritance relations. Setting this tag to YES will force the
markrad	0:cdf462088d13	1754	# CLASS_DIAGRAMS tag to NO.
markrad	0:cdf462088d13	1755
markrad	0:cdf462088d13	1756	CLASS_GRAPH = YES
markrad	0:cdf462088d13	1757
markrad	0:cdf462088d13	1758	# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
markrad	0:cdf462088d13	1759	# will generate a graph for each documented class showing the direct and
markrad	0:cdf462088d13	1760	# indirect implementation dependencies (inheritance, containment, and
markrad	0:cdf462088d13	1761	# class references variables) of the class with other documented classes.
markrad	0:cdf462088d13	1762
markrad	0:cdf462088d13	1763	COLLABORATION_GRAPH = YES
markrad	0:cdf462088d13	1764
markrad	0:cdf462088d13	1765	# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
markrad	0:cdf462088d13	1766	# will generate a graph for groups, showing the direct groups dependencies
markrad	0:cdf462088d13	1767
markrad	0:cdf462088d13	1768	GROUP_GRAPHS = YES
markrad	0:cdf462088d13	1769
markrad	0:cdf462088d13	1770	# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
markrad	0:cdf462088d13	1771	# collaboration diagrams in a style similar to the OMG's Unified Modeling
markrad	0:cdf462088d13	1772	# Language.
markrad	0:cdf462088d13	1773
markrad	0:cdf462088d13	1774	UML_LOOK = NO
markrad	0:cdf462088d13	1775
markrad	0:cdf462088d13	1776	# If the UML_LOOK tag is enabled, the fields and methods are shown inside
markrad	0:cdf462088d13	1777	# the class node. If there are many fields or methods and many nodes the
markrad	0:cdf462088d13	1778	# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
markrad	0:cdf462088d13	1779	# threshold limits the number of items for each type to make the size more
markrad	0:cdf462088d13	1780	# manageable. Set this to 0 for no limit. Note that the threshold may be
markrad	0:cdf462088d13	1781	# exceeded by 50% before the limit is enforced.
markrad	0:cdf462088d13	1782
markrad	0:cdf462088d13	1783	UML_LIMIT_NUM_FIELDS = 10
markrad	0:cdf462088d13	1784
markrad	0:cdf462088d13	1785	# If set to YES, the inheritance and collaboration graphs will show the
markrad	0:cdf462088d13	1786	# relations between templates and their instances.
markrad	0:cdf462088d13	1787
markrad	0:cdf462088d13	1788	TEMPLATE_RELATIONS = NO
markrad	0:cdf462088d13	1789
markrad	0:cdf462088d13	1790	# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
markrad	0:cdf462088d13	1791	# tags are set to YES then doxygen will generate a graph for each documented
markrad	0:cdf462088d13	1792	# file showing the direct and indirect include dependencies of the file with
markrad	0:cdf462088d13	1793	# other documented files.
markrad	0:cdf462088d13	1794
markrad	0:cdf462088d13	1795	INCLUDE_GRAPH = YES
markrad	0:cdf462088d13	1796
markrad	0:cdf462088d13	1797	# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
markrad	0:cdf462088d13	1798	# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
markrad	0:cdf462088d13	1799	# documented header file showing the documented files that directly or
markrad	0:cdf462088d13	1800	# indirectly include this file.
markrad	0:cdf462088d13	1801
markrad	0:cdf462088d13	1802	INCLUDED_BY_GRAPH = YES
markrad	0:cdf462088d13	1803
markrad	0:cdf462088d13	1804	# If the CALL_GRAPH and HAVE_DOT options are set to YES then
markrad	0:cdf462088d13	1805	# doxygen will generate a call dependency graph for every global function
markrad	0:cdf462088d13	1806	# or class method. Note that enabling this option will significantly increase
markrad	0:cdf462088d13	1807	# the time of a run. So in most cases it will be better to enable call graphs
markrad	0:cdf462088d13	1808	# for selected functions only using the \callgraph command.
markrad	0:cdf462088d13	1809
markrad	0:cdf462088d13	1810	CALL_GRAPH = NO
markrad	0:cdf462088d13	1811
markrad	0:cdf462088d13	1812	# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
markrad	0:cdf462088d13	1813	# doxygen will generate a caller dependency graph for every global function
markrad	0:cdf462088d13	1814	# or class method. Note that enabling this option will significantly increase
markrad	0:cdf462088d13	1815	# the time of a run. So in most cases it will be better to enable caller
markrad	0:cdf462088d13	1816	# graphs for selected functions only using the \callergraph command.
markrad	0:cdf462088d13	1817
markrad	0:cdf462088d13	1818	CALLER_GRAPH = NO
markrad	0:cdf462088d13	1819
markrad	0:cdf462088d13	1820	# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
markrad	0:cdf462088d13	1821	# will generate a graphical hierarchy of all classes instead of a textual one.
markrad	0:cdf462088d13	1822
markrad	0:cdf462088d13	1823	GRAPHICAL_HIERARCHY = YES
markrad	0:cdf462088d13	1824
markrad	0:cdf462088d13	1825	# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
markrad	0:cdf462088d13	1826	# then doxygen will show the dependencies a directory has on other directories
markrad	0:cdf462088d13	1827	# in a graphical way. The dependency relations are determined by the #include
markrad	0:cdf462088d13	1828	# relations between the files in the directories.
markrad	0:cdf462088d13	1829
markrad	0:cdf462088d13	1830	DIRECTORY_GRAPH = YES
markrad	0:cdf462088d13	1831
markrad	0:cdf462088d13	1832	# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
markrad	0:cdf462088d13	1833	# generated by dot. Possible values are svg, png, jpg, or gif.
markrad	0:cdf462088d13	1834	# If left blank png will be used. If you choose svg you need to set
markrad	0:cdf462088d13	1835	# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
markrad	0:cdf462088d13	1836	# visible in IE 9+ (other browsers do not have this requirement).
markrad	0:cdf462088d13	1837
markrad	0:cdf462088d13	1838	DOT_IMAGE_FORMAT = png
markrad	0:cdf462088d13	1839
markrad	0:cdf462088d13	1840	# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
markrad	0:cdf462088d13	1841	# enable generation of interactive SVG images that allow zooming and panning.
markrad	0:cdf462088d13	1842	# Note that this requires a modern browser other than Internet Explorer.
markrad	0:cdf462088d13	1843	# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
markrad	0:cdf462088d13	1844	# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
markrad	0:cdf462088d13	1845	# visible. Older versions of IE do not have SVG support.
markrad	0:cdf462088d13	1846
markrad	0:cdf462088d13	1847	INTERACTIVE_SVG = NO
markrad	0:cdf462088d13	1848
markrad	0:cdf462088d13	1849	# The tag DOT_PATH can be used to specify the path where the dot tool can be
markrad	0:cdf462088d13	1850	# found. If left blank, it is assumed the dot tool can be found in the path.
markrad	0:cdf462088d13	1851
markrad	0:cdf462088d13	1852	DOT_PATH =
markrad	0:cdf462088d13	1853
markrad	0:cdf462088d13	1854	# The DOTFILE_DIRS tag can be used to specify one or more directories that
markrad	0:cdf462088d13	1855	# contain dot files that are included in the documentation (see the
markrad	0:cdf462088d13	1856	# \dotfile command).
markrad	0:cdf462088d13	1857
markrad	0:cdf462088d13	1858	DOTFILE_DIRS =
markrad	0:cdf462088d13	1859
markrad	0:cdf462088d13	1860	# The MSCFILE_DIRS tag can be used to specify one or more directories that
markrad	0:cdf462088d13	1861	# contain msc files that are included in the documentation (see the
markrad	0:cdf462088d13	1862	# \mscfile command).
markrad	0:cdf462088d13	1863
markrad	0:cdf462088d13	1864	MSCFILE_DIRS =
markrad	0:cdf462088d13	1865
markrad	0:cdf462088d13	1866	# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
markrad	0:cdf462088d13	1867	# nodes that will be shown in the graph. If the number of nodes in a graph
markrad	0:cdf462088d13	1868	# becomes larger than this value, doxygen will truncate the graph, which is
markrad	0:cdf462088d13	1869	# visualized by representing a node as a red box. Note that doxygen if the
markrad	0:cdf462088d13	1870	# number of direct children of the root node in a graph is already larger than
markrad	0:cdf462088d13	1871	# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
markrad	0:cdf462088d13	1872	# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
markrad	0:cdf462088d13	1873
markrad	0:cdf462088d13	1874	DOT_GRAPH_MAX_NODES = 200
markrad	0:cdf462088d13	1875
markrad	0:cdf462088d13	1876	# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
markrad	0:cdf462088d13	1877	# graphs generated by dot. A depth value of 3 means that only nodes reachable
markrad	0:cdf462088d13	1878	# from the root by following a path via at most 3 edges will be shown. Nodes
markrad	0:cdf462088d13	1879	# that lay further from the root node will be omitted. Note that setting this
markrad	0:cdf462088d13	1880	# option to 1 or 2 may greatly reduce the computation time needed for large
markrad	0:cdf462088d13	1881	# code bases. Also note that the size of a graph can be further restricted by
markrad	0:cdf462088d13	1882	# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
markrad	0:cdf462088d13	1883
markrad	0:cdf462088d13	1884	MAX_DOT_GRAPH_DEPTH = 1000
markrad	0:cdf462088d13	1885
markrad	0:cdf462088d13	1886	# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
markrad	0:cdf462088d13	1887	# background. This is disabled by default, because dot on Windows does not
markrad	0:cdf462088d13	1888	# seem to support this out of the box. Warning: Depending on the platform used,
markrad	0:cdf462088d13	1889	# enabling this option may lead to badly anti-aliased labels on the edges of
markrad	0:cdf462088d13	1890	# a graph (i.e. they become hard to read).
markrad	0:cdf462088d13	1891
markrad	0:cdf462088d13	1892	DOT_TRANSPARENT = YES
markrad	0:cdf462088d13	1893
markrad	0:cdf462088d13	1894	# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
markrad	0:cdf462088d13	1895	# files in one run (i.e. multiple -o and -T options on the command line). This
markrad	0:cdf462088d13	1896	# makes dot run faster, but since only newer versions of dot (>1.8.10)
markrad	0:cdf462088d13	1897	# support this, this feature is disabled by default.
markrad	0:cdf462088d13	1898
markrad	0:cdf462088d13	1899	DOT_MULTI_TARGETS = NO
markrad	0:cdf462088d13	1900
markrad	0:cdf462088d13	1901	# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	1902	# generate a legend page explaining the meaning of the various boxes and
markrad	0:cdf462088d13	1903	# arrows in the dot generated graphs.
markrad	0:cdf462088d13	1904
markrad	0:cdf462088d13	1905	GENERATE_LEGEND = YES
markrad	0:cdf462088d13	1906
markrad	0:cdf462088d13	1907	# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
markrad	0:cdf462088d13	1908	# remove the intermediate dot files that are used to generate
markrad	0:cdf462088d13	1909	# the various graphs.
markrad	0:cdf462088d13	1910
markrad	0:cdf462088d13	1911	DOT_CLEANUP = YES

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	04 Jun 2019
Imports:	1
Forks:	0
Commits:	2
Dependents:	1
Dependencies:	0
Followers:	2

Developers

Willie Solano

Pablo Andrés Araya Castillo

doxygen/mbedtls.doxyfile@0:cdf462088d13, 2017-01-05 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Developers

Important Information for this Arm website

Access Warning