mbed TLS Build
include/mbedtls/ssl.h
- Committer:
- markrad
- Date:
- 2017-01-05
- Revision:
- 0:cdf462088d13
File content as of revision 0:cdf462088d13:
/** * \file ssl.h * * \brief SSL/TLS functions. * * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * This file is part of mbed TLS (https://tls.mbed.org) */ #ifndef MBEDTLS_SSL_H #define MBEDTLS_SSL_H #if !defined(MBEDTLS_CONFIG_FILE) #include "config.h" #else #include MBEDTLS_CONFIG_FILE #endif #include "bignum.h" #include "ecp.h" #include "ssl_ciphersuites.h" #if defined(MBEDTLS_X509_CRT_PARSE_C) #include "x509_crt.h" #include "x509_crl.h" #endif #if defined(MBEDTLS_DHM_C) #include "dhm.h" #endif #if defined(MBEDTLS_ECDH_C) #include "ecdh.h" #endif #if defined(MBEDTLS_ZLIB_SUPPORT) #include "zlib.h" #endif #if defined(MBEDTLS_HAVE_TIME) #include "mbedtls/platform_time.h" #endif /* * SSL Error codes */ #define MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE -0x7080 /**< The requested feature is not available. */ #define MBEDTLS_ERR_SSL_BAD_INPUT_DATA -0x7100 /**< Bad input parameters to function. */ #define MBEDTLS_ERR_SSL_INVALID_MAC -0x7180 /**< Verification of the message MAC failed. */ #define MBEDTLS_ERR_SSL_INVALID_RECORD -0x7200 /**< An invalid SSL record was received. */ #define MBEDTLS_ERR_SSL_CONN_EOF -0x7280 /**< The connection indicated an EOF. */ #define MBEDTLS_ERR_SSL_UNKNOWN_CIPHER -0x7300 /**< An unknown cipher was received. */ #define MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN -0x7380 /**< The server has no ciphersuites in common with the client. */ #define MBEDTLS_ERR_SSL_NO_RNG -0x7400 /**< No RNG was provided to the SSL module. */ #define MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE -0x7480 /**< No client certification received from the client, but required by the authentication mode. */ #define MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE -0x7500 /**< Our own certificate(s) is/are too large to send in an SSL message. */ #define MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED -0x7580 /**< The own certificate is not set, but needed by the server. */ #define MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED -0x7600 /**< The own private key or pre-shared key is not set, but needed. */ #define MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED -0x7680 /**< No CA Chain is set, but required to operate. */ #define MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE -0x7700 /**< An unexpected message was received from our peer. */ #define MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE -0x7780 /**< A fatal alert message was received from our peer. */ #define MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED -0x7800 /**< Verification of our peer failed. */ #define MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY -0x7880 /**< The peer notified us that the connection is going to be closed. */ #define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO -0x7900 /**< Processing of the ClientHello handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO -0x7980 /**< Processing of the ServerHello handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE -0x7A00 /**< Processing of the Certificate handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST -0x7A80 /**< Processing of the CertificateRequest handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE -0x7B00 /**< Processing of the ServerKeyExchange handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE -0x7B80 /**< Processing of the ServerHelloDone handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE -0x7C00 /**< Processing of the ClientKeyExchange handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP -0x7C80 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public. */ #define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS -0x7D00 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret. */ #define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY -0x7D80 /**< Processing of the CertificateVerify handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC -0x7E00 /**< Processing of the ChangeCipherSpec handshake message failed. */ #define MBEDTLS_ERR_SSL_BAD_HS_FINISHED -0x7E80 /**< Processing of the Finished handshake message failed. */ #define MBEDTLS_ERR_SSL_ALLOC_FAILED -0x7F00 /**< Memory allocation failed */ #define MBEDTLS_ERR_SSL_HW_ACCEL_FAILED -0x7F80 /**< Hardware acceleration function returned with error */ #define MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH -0x6F80 /**< Hardware acceleration function skipped / left alone data */ #define MBEDTLS_ERR_SSL_COMPRESSION_FAILED -0x6F00 /**< Processing of the compression / decompression failed */ #define MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION -0x6E80 /**< Handshake protocol not within min/max boundaries */ #define MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET -0x6E00 /**< Processing of the NewSessionTicket handshake message failed. */ #define MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED -0x6D80 /**< Session ticket has expired. */ #define MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH -0x6D00 /**< Public key type mismatch (eg, asked for RSA key exchange and presented EC key) */ #define MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY -0x6C80 /**< Unknown identity received (eg, PSK identity) */ #define MBEDTLS_ERR_SSL_INTERNAL_ERROR -0x6C00 /**< Internal error (eg, unexpected failure in lower-level module) */ #define MBEDTLS_ERR_SSL_COUNTER_WRAPPING -0x6B80 /**< A counter would wrap (eg, too many messages exchanged). */ #define MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO -0x6B00 /**< Unexpected message at ServerHello in renegotiation. */ #define MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED -0x6A80 /**< DTLS client must retry for hello verification */ #define MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL -0x6A00 /**< A buffer is too small to receive or write a message */ #define MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE -0x6980 /**< None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages). */ #define MBEDTLS_ERR_SSL_WANT_READ -0x6900 /**< Connection requires a read call. */ #define MBEDTLS_ERR_SSL_WANT_WRITE -0x6880 /**< Connection requires a write call. */ #define MBEDTLS_ERR_SSL_TIMEOUT -0x6800 /**< The operation timed out. */ #define MBEDTLS_ERR_SSL_CLIENT_RECONNECT -0x6780 /**< The client initiated a reconnect from the same port. */ #define MBEDTLS_ERR_SSL_UNEXPECTED_RECORD -0x6700 /**< Record header looks valid but is not expected. */ #define MBEDTLS_ERR_SSL_NON_FATAL -0x6680 /**< The alert message received indicates a non-fatal error. */ #define MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH -0x6600 /**< Couldn't set the hash for verifying CertificateVerify */ /* * Various constants */ #define MBEDTLS_SSL_MAJOR_VERSION_3 3 #define MBEDTLS_SSL_MINOR_VERSION_0 0 /*!< SSL v3.0 */ #define MBEDTLS_SSL_MINOR_VERSION_1 1 /*!< TLS v1.0 */ #define MBEDTLS_SSL_MINOR_VERSION_2 2 /*!< TLS v1.1 */ #define MBEDTLS_SSL_MINOR_VERSION_3 3 /*!< TLS v1.2 */ #define MBEDTLS_SSL_TRANSPORT_STREAM 0 /*!< TLS */ #define MBEDTLS_SSL_TRANSPORT_DATAGRAM 1 /*!< DTLS */ #define MBEDTLS_SSL_MAX_HOST_NAME_LEN 255 /*!< Maximum host name defined in RFC 1035 */ /* RFC 6066 section 4, see also mfl_code_to_length in ssl_tls.c * NONE must be zero so that memset()ing structure to zero works */ #define MBEDTLS_SSL_MAX_FRAG_LEN_NONE 0 /*!< don't use this extension */ #define MBEDTLS_SSL_MAX_FRAG_LEN_512 1 /*!< MaxFragmentLength 2^9 */ #define MBEDTLS_SSL_MAX_FRAG_LEN_1024 2 /*!< MaxFragmentLength 2^10 */ #define MBEDTLS_SSL_MAX_FRAG_LEN_2048 3 /*!< MaxFragmentLength 2^11 */ #define MBEDTLS_SSL_MAX_FRAG_LEN_4096 4 /*!< MaxFragmentLength 2^12 */ #define MBEDTLS_SSL_MAX_FRAG_LEN_INVALID 5 /*!< first invalid value */ #define MBEDTLS_SSL_IS_CLIENT 0 #define MBEDTLS_SSL_IS_SERVER 1 #define MBEDTLS_SSL_IS_NOT_FALLBACK 0 #define MBEDTLS_SSL_IS_FALLBACK 1 #define MBEDTLS_SSL_EXTENDED_MS_DISABLED 0 #define MBEDTLS_SSL_EXTENDED_MS_ENABLED 1 #define MBEDTLS_SSL_ETM_DISABLED 0 #define MBEDTLS_SSL_ETM_ENABLED 1 #define MBEDTLS_SSL_COMPRESS_NULL 0 #define MBEDTLS_SSL_COMPRESS_DEFLATE 1 #define MBEDTLS_SSL_VERIFY_NONE 0 #define MBEDTLS_SSL_VERIFY_OPTIONAL 1 #define MBEDTLS_SSL_VERIFY_REQUIRED 2 #define MBEDTLS_SSL_VERIFY_UNSET 3 /* Used only for sni_authmode */ #define MBEDTLS_SSL_LEGACY_RENEGOTIATION 0 #define MBEDTLS_SSL_SECURE_RENEGOTIATION 1 #define MBEDTLS_SSL_RENEGOTIATION_DISABLED 0 #define MBEDTLS_SSL_RENEGOTIATION_ENABLED 1 #define MBEDTLS_SSL_ANTI_REPLAY_DISABLED 0 #define MBEDTLS_SSL_ANTI_REPLAY_ENABLED 1 #define MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED -1 #define MBEDTLS_SSL_RENEGO_MAX_RECORDS_DEFAULT 16 #define MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION 0 #define MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION 1 #define MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE 2 #define MBEDTLS_SSL_TRUNC_HMAC_DISABLED 0 #define MBEDTLS_SSL_TRUNC_HMAC_ENABLED 1 #define MBEDTLS_SSL_TRUNCATED_HMAC_LEN 10 /* 80 bits, rfc 6066 section 7 */ #define MBEDTLS_SSL_SESSION_TICKETS_DISABLED 0 #define MBEDTLS_SSL_SESSION_TICKETS_ENABLED 1 #define MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED 0 #define MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED 1 #define MBEDTLS_SSL_ARC4_ENABLED 0 #define MBEDTLS_SSL_ARC4_DISABLED 1 #define MBEDTLS_SSL_PRESET_DEFAULT 0 #define MBEDTLS_SSL_PRESET_SUITEB 2 /* * Default range for DTLS retransmission timer value, in milliseconds. * RFC 6347 4.2.4.1 says from 1 second to 60 seconds. */ #define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MIN 1000 #define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MAX 60000 /** * \name SECTION: Module settings * * The configuration options you can set for this module are in this section. * Either change them in config.h or define them on the compiler command line. * \{ */ #if !defined(MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME) #define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ #endif /* * Maxium fragment length in bytes, * determines the size of each of the two internal I/O buffers. * * Note: the RFC defines the default size of SSL / TLS messages. If you * change the value here, other clients / servers may not be able to * communicate with you anymore. Only change this value if you control * both sides of the connection and have it reduced at both sides, or * if you're using the Max Fragment Length extension and you know all your * peers are using it too! */ #if !defined(MBEDTLS_SSL_MAX_CONTENT_LEN) #define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ #endif /* \} name SECTION: Module settings */ /* * Length of the verify data for secure renegotiation */ #if defined(MBEDTLS_SSL_PROTO_SSL3) #define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 36 #else #define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 12 #endif /* * Signaling ciphersuite values (SCSV) */ #define MBEDTLS_SSL_EMPTY_RENEGOTIATION_INFO 0xFF /**< renegotiation info ext */ #define MBEDTLS_SSL_FALLBACK_SCSV_VALUE 0x5600 /**< RFC 7507 section 2 */ /* * Supported Signature and Hash algorithms (For TLS 1.2) * RFC 5246 section 7.4.1.4.1 */ #define MBEDTLS_SSL_HASH_NONE 0 #define MBEDTLS_SSL_HASH_MD5 1 #define MBEDTLS_SSL_HASH_SHA1 2 #define MBEDTLS_SSL_HASH_SHA224 3 #define MBEDTLS_SSL_HASH_SHA256 4 #define MBEDTLS_SSL_HASH_SHA384 5 #define MBEDTLS_SSL_HASH_SHA512 6 #define MBEDTLS_SSL_SIG_ANON 0 #define MBEDTLS_SSL_SIG_RSA 1 #define MBEDTLS_SSL_SIG_ECDSA 3 /* * Client Certificate Types * RFC 5246 section 7.4.4 plus RFC 4492 section 5.5 */ #define MBEDTLS_SSL_CERT_TYPE_RSA_SIGN 1 #define MBEDTLS_SSL_CERT_TYPE_ECDSA_SIGN 64 /* * Message, alert and handshake types */ #define MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC 20 #define MBEDTLS_SSL_MSG_ALERT 21 #define MBEDTLS_SSL_MSG_HANDSHAKE 22 #define MBEDTLS_SSL_MSG_APPLICATION_DATA 23 #define MBEDTLS_SSL_ALERT_LEVEL_WARNING 1 #define MBEDTLS_SSL_ALERT_LEVEL_FATAL 2 #define MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY 0 /* 0x00 */ #define MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE 10 /* 0x0A */ #define MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC 20 /* 0x14 */ #define MBEDTLS_SSL_ALERT_MSG_DECRYPTION_FAILED 21 /* 0x15 */ #define MBEDTLS_SSL_ALERT_MSG_RECORD_OVERFLOW 22 /* 0x16 */ #define MBEDTLS_SSL_ALERT_MSG_DECOMPRESSION_FAILURE 30 /* 0x1E */ #define MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE 40 /* 0x28 */ #define MBEDTLS_SSL_ALERT_MSG_NO_CERT 41 /* 0x29 */ #define MBEDTLS_SSL_ALERT_MSG_BAD_CERT 42 /* 0x2A */ #define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT 43 /* 0x2B */ #define MBEDTLS_SSL_ALERT_MSG_CERT_REVOKED 44 /* 0x2C */ #define MBEDTLS_SSL_ALERT_MSG_CERT_EXPIRED 45 /* 0x2D */ #define MBEDTLS_SSL_ALERT_MSG_CERT_UNKNOWN 46 /* 0x2E */ #define MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER 47 /* 0x2F */ #define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_CA 48 /* 0x30 */ #define MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED 49 /* 0x31 */ #define MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR 50 /* 0x32 */ #define MBEDTLS_SSL_ALERT_MSG_DECRYPT_ERROR 51 /* 0x33 */ #define MBEDTLS_SSL_ALERT_MSG_EXPORT_RESTRICTION 60 /* 0x3C */ #define MBEDTLS_SSL_ALERT_MSG_PROTOCOL_VERSION 70 /* 0x46 */ #define MBEDTLS_SSL_ALERT_MSG_INSUFFICIENT_SECURITY 71 /* 0x47 */ #define MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR 80 /* 0x50 */ #define MBEDTLS_SSL_ALERT_MSG_INAPROPRIATE_FALLBACK 86 /* 0x56 */ #define MBEDTLS_SSL_ALERT_MSG_USER_CANCELED 90 /* 0x5A */ #define MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION 100 /* 0x64 */ #define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_EXT 110 /* 0x6E */ #define MBEDTLS_SSL_ALERT_MSG_UNRECOGNIZED_NAME 112 /* 0x70 */ #define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_PSK_IDENTITY 115 /* 0x73 */ #define MBEDTLS_SSL_ALERT_MSG_NO_APPLICATION_PROTOCOL 120 /* 0x78 */ #define MBEDTLS_SSL_HS_HELLO_REQUEST 0 #define MBEDTLS_SSL_HS_CLIENT_HELLO 1 #define MBEDTLS_SSL_HS_SERVER_HELLO 2 #define MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST 3 #define MBEDTLS_SSL_HS_NEW_SESSION_TICKET 4 #define MBEDTLS_SSL_HS_CERTIFICATE 11 #define MBEDTLS_SSL_HS_SERVER_KEY_EXCHANGE 12 #define MBEDTLS_SSL_HS_CERTIFICATE_REQUEST 13 #define MBEDTLS_SSL_HS_SERVER_HELLO_DONE 14 #define MBEDTLS_SSL_HS_CERTIFICATE_VERIFY 15 #define MBEDTLS_SSL_HS_CLIENT_KEY_EXCHANGE 16 #define MBEDTLS_SSL_HS_FINISHED 20 /* * TLS extensions */ #define MBEDTLS_TLS_EXT_SERVERNAME 0 #define MBEDTLS_TLS_EXT_SERVERNAME_HOSTNAME 0 #define MBEDTLS_TLS_EXT_MAX_FRAGMENT_LENGTH 1 #define MBEDTLS_TLS_EXT_TRUNCATED_HMAC 4 #define MBEDTLS_TLS_EXT_SUPPORTED_ELLIPTIC_CURVES 10 #define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS 11 #define MBEDTLS_TLS_EXT_SIG_ALG 13 #define MBEDTLS_TLS_EXT_ALPN 16 #define MBEDTLS_TLS_EXT_ENCRYPT_THEN_MAC 22 /* 0x16 */ #define MBEDTLS_TLS_EXT_EXTENDED_MASTER_SECRET 0x0017 /* 23 */ #define MBEDTLS_TLS_EXT_SESSION_TICKET 35 #define MBEDTLS_TLS_EXT_ECJPAKE_KKPP 256 /* experimental */ #define MBEDTLS_TLS_EXT_RENEGOTIATION_INFO 0xFF01 /* * Size defines */ #if !defined(MBEDTLS_PSK_MAX_LEN) #define MBEDTLS_PSK_MAX_LEN 32 /* 256 bits */ #endif /* Dummy type used only for its size */ union mbedtls_ssl_premaster_secret { #if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) unsigned char _pms_rsa[48]; /* RFC 5246 8.1.1 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) unsigned char _pms_dhm[MBEDTLS_MPI_MAX_SIZE]; /* RFC 5246 8.1.2 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \ defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \ defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) unsigned char _pms_ecdh[MBEDTLS_ECP_MAX_BYTES]; /* RFC 4492 5.10 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) unsigned char _pms_psk[4 + 2 * MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 2 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) unsigned char _pms_dhe_psk[4 + MBEDTLS_MPI_MAX_SIZE + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 3 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) unsigned char _pms_rsa_psk[52 + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 4 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) unsigned char _pms_ecdhe_psk[4 + MBEDTLS_ECP_MAX_BYTES + MBEDTLS_PSK_MAX_LEN]; /* RFC 5489 2 */ #endif #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) unsigned char _pms_ecjpake[32]; /* Thread spec: SHA-256 output */ #endif }; #define MBEDTLS_PREMASTER_SIZE sizeof( union mbedtls_ssl_premaster_secret ) #ifdef __cplusplus extern "C" { #endif /* * SSL state machine */ typedef enum { MBEDTLS_SSL_HELLO_REQUEST, MBEDTLS_SSL_CLIENT_HELLO, MBEDTLS_SSL_SERVER_HELLO, MBEDTLS_SSL_SERVER_CERTIFICATE, MBEDTLS_SSL_SERVER_KEY_EXCHANGE, MBEDTLS_SSL_CERTIFICATE_REQUEST, MBEDTLS_SSL_SERVER_HELLO_DONE, MBEDTLS_SSL_CLIENT_CERTIFICATE, MBEDTLS_SSL_CLIENT_KEY_EXCHANGE, MBEDTLS_SSL_CERTIFICATE_VERIFY, MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC, MBEDTLS_SSL_CLIENT_FINISHED, MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC, MBEDTLS_SSL_SERVER_FINISHED, MBEDTLS_SSL_FLUSH_BUFFERS, MBEDTLS_SSL_HANDSHAKE_WRAPUP, MBEDTLS_SSL_HANDSHAKE_OVER, MBEDTLS_SSL_SERVER_NEW_SESSION_TICKET, MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT, } mbedtls_ssl_states; /** * \brief Callback type: send data on the network. * * \note That callback may be either blocking or non-blocking. * * \param ctx Context for the send callback (typically a file descriptor) * \param buf Buffer holding the data to send * \param len Length of the data to send * * \return The callback must return the number of bytes sent if any, * or a non-zero error code. * If performing non-blocking I/O, \c MBEDTLS_ERR_SSL_WANT_WRITE * must be returned when the operation would block. * * \note The callback is allowed to send fewer bytes than requested. * It must always return the number of bytes actually sent. */ typedef int mbedtls_ssl_send_t( void *ctx, const unsigned char *buf, size_t len ); /** * \brief Callback type: receive data from the network. * * \note That callback may be either blocking or non-blocking. * * \param ctx Context for the receive callback (typically a file * descriptor) * \param buf Buffer to write the received data to * \param len Length of the receive buffer * * \return The callback must return the number of bytes received, * or a non-zero error code. * If performing non-blocking I/O, \c MBEDTLS_ERR_SSL_WANT_READ * must be returned when the operation would block. * * \note The callback may receive fewer bytes than the length of the * buffer. It must always return the number of bytes actually * received and written to the buffer. */ typedef int mbedtls_ssl_recv_t( void *ctx, unsigned char *buf, size_t len ); /** * \brief Callback type: receive data from the network, with timeout * * \note That callback must block until data is received, or the * timeout delay expires, or the operation is interrupted by a * signal. * * \param ctx Context for the receive callback (typically a file descriptor) * \param buf Buffer to write the received data to * \param len Length of the receive buffer * \param timeout Maximum nomber of millisecondes to wait for data * 0 means no timeout (potentially waiting forever) * * \return The callback must return the number of bytes received, * or a non-zero error code: * \c MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out, * \c MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal. * * \note The callback may receive fewer bytes than the length of the * buffer. It must always return the number of bytes actually * received and written to the buffer. */ typedef int mbedtls_ssl_recv_timeout_t( void *ctx, unsigned char *buf, size_t len, uint32_t timeout ); /** * \brief Callback type: set a pair of timers/delays to watch * * \param ctx Context pointer * \param int_ms Intermediate delay in milliseconds * \param fin_ms Final delay in milliseconds * 0 cancels the current timer. * * \note This callback must at least store the necessary information * for the associated \c mbedtls_ssl_get_timer_t callback to * return correct information. * * \note If using a event-driven style of programming, an event must * be generated when the final delay is passed. The event must * cause a call to \c mbedtls_ssl_handshake() with the proper * SSL context to be scheduled. Care must be taken to ensure * that at most one such call happens at a time. * * \note Only one timer at a time must be running. Calling this * function while a timer is running must cancel it. Cancelled * timers must not generate any event. */ typedef void mbedtls_ssl_set_timer_t( void * ctx, uint32_t int_ms, uint32_t fin_ms ); /** * \brief Callback type: get status of timers/delays * * \param ctx Context pointer * * \return This callback must return: * -1 if cancelled (fin_ms == 0), * 0 if none of the delays have passed, * 1 if only the intermediate delay has passed, * 2 if the final delay has passed. */ typedef int mbedtls_ssl_get_timer_t( void * ctx ); /* Defined below */ typedef struct mbedtls_ssl_session mbedtls_ssl_session; typedef struct mbedtls_ssl_context mbedtls_ssl_context; typedef struct mbedtls_ssl_config mbedtls_ssl_config; /* Defined in ssl_internal.h */ typedef struct mbedtls_ssl_transform mbedtls_ssl_transform; typedef struct mbedtls_ssl_handshake_params mbedtls_ssl_handshake_params; #if defined(MBEDTLS_X509_CRT_PARSE_C) typedef struct mbedtls_ssl_key_cert mbedtls_ssl_key_cert; #endif #if defined(MBEDTLS_SSL_PROTO_DTLS) typedef struct mbedtls_ssl_flight_item mbedtls_ssl_flight_item; #endif /* * This structure is used for storing current session data. */ struct mbedtls_ssl_session { #if defined(MBEDTLS_HAVE_TIME) mbedtls_time_t start; /*!< starting time */ #endif int ciphersuite; /*!< chosen ciphersuite */ int compression; /*!< chosen compression */ size_t id_len; /*!< session id length */ unsigned char id[32]; /*!< session identifier */ unsigned char master[48]; /*!< the master secret */ #if defined(MBEDTLS_X509_CRT_PARSE_C) mbedtls_x509_crt *peer_cert; /*!< peer X.509 cert chain */ #endif /* MBEDTLS_X509_CRT_PARSE_C */ uint32_t verify_result; /*!< verification result */ #if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) unsigned char *ticket; /*!< RFC 5077 session ticket */ size_t ticket_len; /*!< session ticket length */ uint32_t ticket_lifetime; /*!< ticket lifetime hint */ #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) unsigned char mfl_code; /*!< MaxFragmentLength negotiated by peer */ #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ #if defined(MBEDTLS_SSL_TRUNCATED_HMAC) int trunc_hmac; /*!< flag for truncated hmac activation */ #endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) int encrypt_then_mac; /*!< flag for EtM activation */ #endif }; /** * SSL/TLS configuration to be shared between mbedtls_ssl_context structures. */ struct mbedtls_ssl_config { /* Group items by size (largest first) to minimize padding overhead */ /* * Pointers */ const int *ciphersuite_list[4]; /*!< allowed ciphersuites per version */ /** Callback for printing debug output */ void (*f_dbg)(void *, int, const char *, int, const char *); void *p_dbg; /*!< context for the debug function */ /** Callback for getting (pseudo-)random numbers */ int (*f_rng)(void *, unsigned char *, size_t); void *p_rng; /*!< context for the RNG function */ /** Callback to retrieve a session from the cache */ int (*f_get_cache)(void *, mbedtls_ssl_session *); /** Callback to store a session into the cache */ int (*f_set_cache)(void *, const mbedtls_ssl_session *); void *p_cache; /*!< context for cache callbacks */ #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) /** Callback for setting cert according to SNI extension */ int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, size_t); void *p_sni; /*!< context for SNI callback */ #endif #if defined(MBEDTLS_X509_CRT_PARSE_C) /** Callback to customize X.509 certificate chain verification */ int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *); void *p_vrfy; /*!< context for X.509 verify calllback */ #endif #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) /** Callback to retrieve PSK key from identity */ int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, size_t); void *p_psk; /*!< context for PSK callback */ #endif #if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) /** Callback to create & write a cookie for ClientHello veirifcation */ int (*f_cookie_write)( void *, unsigned char **, unsigned char *, const unsigned char *, size_t ); /** Callback to verify validity of a ClientHello cookie */ int (*f_cookie_check)( void *, const unsigned char *, size_t, const unsigned char *, size_t ); void *p_cookie; /*!< context for the cookie callbacks */ #endif #if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C) /** Callback to create & write a session ticket */ int (*f_ticket_write)( void *, const mbedtls_ssl_session *, unsigned char *, const unsigned char *, size_t *, uint32_t * ); /** Callback to parse a session ticket into a session structure */ int (*f_ticket_parse)( void *, mbedtls_ssl_session *, unsigned char *, size_t); void *p_ticket; /*!< context for the ticket callbacks */ #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */ #if defined(MBEDTLS_SSL_EXPORT_KEYS) /** Callback to export key block and master secret */ int (*f_export_keys)( void *, const unsigned char *, const unsigned char *, size_t, size_t, size_t ); void *p_export_keys; /*!< context for key export callback */ #endif #if defined(MBEDTLS_X509_CRT_PARSE_C) const mbedtls_x509_crt_profile *cert_profile; /*!< verification profile */ mbedtls_ssl_key_cert *key_cert; /*!< own certificate/key pair(s) */ mbedtls_x509_crt *ca_chain; /*!< trusted CAs */ mbedtls_x509_crl *ca_crl; /*!< trusted CAs CRLs */ #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) const int *sig_hashes; /*!< allowed signature hashes */ #endif #if defined(MBEDTLS_ECP_C) const mbedtls_ecp_group_id *curve_list; /*!< allowed curves */ #endif #if defined(MBEDTLS_DHM_C) mbedtls_mpi dhm_P; /*!< prime modulus for DHM */ mbedtls_mpi dhm_G; /*!< generator for DHM */ #endif #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) unsigned char *psk; /*!< pre-shared key */ size_t psk_len; /*!< length of the pre-shared key */ unsigned char *psk_identity; /*!< identity for PSK negotiation */ size_t psk_identity_len;/*!< length of identity */ #endif #if defined(MBEDTLS_SSL_ALPN) const char **alpn_list; /*!< ordered list of protocols */ #endif /* * Numerical settings (int then char) */ uint32_t read_timeout; /*!< timeout for mbedtls_ssl_read (ms) */ #if defined(MBEDTLS_SSL_PROTO_DTLS) uint32_t hs_timeout_min; /*!< initial value of the handshake retransmission timeout (ms) */ uint32_t hs_timeout_max; /*!< maximum value of the handshake retransmission timeout (ms) */ #endif #if defined(MBEDTLS_SSL_RENEGOTIATION) int renego_max_records; /*!< grace period for renegotiation */ unsigned char renego_period[8]; /*!< value of the record counters that triggers renegotiation */ #endif #if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) unsigned int badmac_limit; /*!< limit of records with a bad MAC */ #endif #if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C) unsigned int dhm_min_bitlen; /*!< min. bit length of the DHM prime */ #endif unsigned char max_major_ver; /*!< max. major version used */ unsigned char max_minor_ver; /*!< max. minor version used */ unsigned char min_major_ver; /*!< min. major version used */ unsigned char min_minor_ver; /*!< min. minor version used */ /* * Flags (bitfields) */ unsigned int endpoint : 1; /*!< 0: client, 1: server */ unsigned int transport : 1; /*!< stream (TLS) or datagram (DTLS) */ unsigned int authmode : 2; /*!< MBEDTLS_SSL_VERIFY_XXX */ /* needed even with renego disabled for LEGACY_BREAK_HANDSHAKE */ unsigned int allow_legacy_renegotiation : 2 ; /*!< MBEDTLS_LEGACY_XXX */ #if defined(MBEDTLS_ARC4_C) unsigned int arc4_disabled : 1; /*!< blacklist RC4 ciphersuites? */ #endif #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) unsigned int mfl_code : 3; /*!< desired fragment length */ #endif #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) unsigned int encrypt_then_mac : 1 ; /*!< negotiate encrypt-then-mac? */ #endif #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) unsigned int extended_ms : 1; /*!< negotiate extended master secret? */ #endif #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) unsigned int anti_replay : 1; /*!< detect and prevent replay? */ #endif #if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) unsigned int cbc_record_splitting : 1; /*!< do cbc record splitting */ #endif #if defined(MBEDTLS_SSL_RENEGOTIATION) unsigned int disable_renegotiation : 1; /*!< disable renegotiation? */ #endif #if defined(MBEDTLS_SSL_TRUNCATED_HMAC) unsigned int trunc_hmac : 1; /*!< negotiate truncated hmac? */ #endif #if defined(MBEDTLS_SSL_SESSION_TICKETS) unsigned int session_tickets : 1; /*!< use session tickets? */ #endif #if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C) unsigned int fallback : 1; /*!< is this a fallback? */ #endif }; struct mbedtls_ssl_context { const mbedtls_ssl_config *conf; /*!< configuration information */ /* * Miscellaneous */ int state; /*!< SSL handshake: current state */ #if defined(MBEDTLS_SSL_RENEGOTIATION) int renego_status; /*!< Initial, in progress, pending? */ int renego_records_seen; /*!< Records since renego request, or with DTLS, number of retransmissions of request if renego_max_records is < 0 */ #endif int major_ver; /*!< equal to MBEDTLS_SSL_MAJOR_VERSION_3 */ int minor_ver; /*!< either 0 (SSL3) or 1 (TLS1.0) */ #if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) unsigned badmac_seen; /*!< records with a bad MAC received */ #endif mbedtls_ssl_send_t *f_send; /*!< Callback for network send */ mbedtls_ssl_recv_t *f_recv; /*!< Callback for network receive */ mbedtls_ssl_recv_timeout_t *f_recv_timeout; /*!< Callback for network receive with timeout */ void *p_bio; /*!< context for I/O operations */ /* * Session layer */ mbedtls_ssl_session *session_in; /*!< current session data (in) */ mbedtls_ssl_session *session_out; /*!< current session data (out) */ mbedtls_ssl_session *session; /*!< negotiated session data */ mbedtls_ssl_session *session_negotiate; /*!< session data in negotiation */ mbedtls_ssl_handshake_params *handshake; /*!< params required only during the handshake process */ /* * Record layer transformations */ mbedtls_ssl_transform *transform_in; /*!< current transform params (in) */ mbedtls_ssl_transform *transform_out; /*!< current transform params (in) */ mbedtls_ssl_transform *transform; /*!< negotiated transform params */ mbedtls_ssl_transform *transform_negotiate; /*!< transform params in negotiation */ /* * Timers */ void *p_timer; /*!< context for the timer callbacks */ mbedtls_ssl_set_timer_t *f_set_timer; /*!< set timer callback */ mbedtls_ssl_get_timer_t *f_get_timer; /*!< get timer callback */ /* * Record layer (incoming data) */ unsigned char *in_buf; /*!< input buffer */ unsigned char *in_ctr; /*!< 64-bit incoming message counter TLS: maintained by us DTLS: read from peer */ unsigned char *in_hdr; /*!< start of record header */ unsigned char *in_len; /*!< two-bytes message length field */ unsigned char *in_iv; /*!< ivlen-byte IV */ unsigned char *in_msg; /*!< message contents (in_iv+ivlen) */ unsigned char *in_offt; /*!< read offset in application data */ int in_msgtype; /*!< record header: message type */ size_t in_msglen; /*!< record header: message length */ size_t in_left; /*!< amount of data read so far */ #if defined(MBEDTLS_SSL_PROTO_DTLS) uint16_t in_epoch; /*!< DTLS epoch for incoming records */ size_t next_record_offset; /*!< offset of the next record in datagram (equal to in_left if none) */ #endif #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) uint64_t in_window_top; /*!< last validated record seq_num */ uint64_t in_window; /*!< bitmask for replay detection */ #endif size_t in_hslen; /*!< current handshake message length, including the handshake header */ int nb_zero; /*!< # of 0-length encrypted messages */ int record_read; /*!< record is already present */ /* * Record layer (outgoing data) */ unsigned char *out_buf; /*!< output buffer */ unsigned char *out_ctr; /*!< 64-bit outgoing message counter */ unsigned char *out_hdr; /*!< start of record header */ unsigned char *out_len; /*!< two-bytes message length field */ unsigned char *out_iv; /*!< ivlen-byte IV */ unsigned char *out_msg; /*!< message contents (out_iv+ivlen) */ int out_msgtype; /*!< record header: message type */ size_t out_msglen; /*!< record header: message length */ size_t out_left; /*!< amount of data not yet written */ #if defined(MBEDTLS_ZLIB_SUPPORT) unsigned char *compress_buf; /*!< zlib data buffer */ #endif #if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) signed char split_done; /*!< current record already splitted? */ #endif /* * PKI layer */ int client_auth; /*!< flag for client auth. */ /* * User settings */ #if defined(MBEDTLS_X509_CRT_PARSE_C) char *hostname; /*!< expected peer CN for verification (and SNI if available) */ #endif #if defined(MBEDTLS_SSL_ALPN) const char *alpn_chosen; /*!< negotiated protocol */ #endif /* * Information for DTLS hello verify */ #if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) unsigned char *cli_id; /*!< transport-level ID of the client */ size_t cli_id_len; /*!< length of cli_id */ #endif /* * Secure renegotiation */ /* needed to know when to send extension on server */ int secure_renegotiation; /*!< does peer support legacy or secure renegotiation */ #if defined(MBEDTLS_SSL_RENEGOTIATION) size_t verify_data_len; /*!< length of verify data stored */ char own_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */ char peer_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */ #endif }; #if defined(MBEDTLS_SSL_HW_RECORD_ACCEL) #define MBEDTLS_SSL_CHANNEL_OUTBOUND 0 #define MBEDTLS_SSL_CHANNEL_INBOUND 1 extern int (*mbedtls_ssl_hw_record_init)(mbedtls_ssl_context *ssl, const unsigned char *key_enc, const unsigned char *key_dec, size_t keylen, const unsigned char *iv_enc, const unsigned char *iv_dec, size_t ivlen, const unsigned char *mac_enc, const unsigned char *mac_dec, size_t maclen); extern int (*mbedtls_ssl_hw_record_activate)(mbedtls_ssl_context *ssl, int direction); extern int (*mbedtls_ssl_hw_record_reset)(mbedtls_ssl_context *ssl); extern int (*mbedtls_ssl_hw_record_write)(mbedtls_ssl_context *ssl); extern int (*mbedtls_ssl_hw_record_read)(mbedtls_ssl_context *ssl); extern int (*mbedtls_ssl_hw_record_finish)(mbedtls_ssl_context *ssl); #endif /* MBEDTLS_SSL_HW_RECORD_ACCEL */ /** * \brief Returns the list of ciphersuites supported by the SSL/TLS module. * * \return a statically allocated array of ciphersuites, the last * entry is 0. */ const int *mbedtls_ssl_list_ciphersuites( void ); /** * \brief Return the name of the ciphersuite associated with the * given ID * * \param ciphersuite_id SSL ciphersuite ID * * \return a string containing the ciphersuite name */ const char *mbedtls_ssl_get_ciphersuite_name( const int ciphersuite_id ); /** * \brief Return the ID of the ciphersuite associated with the * given name * * \param ciphersuite_name SSL ciphersuite name * * \return the ID with the ciphersuite or 0 if not found */ int mbedtls_ssl_get_ciphersuite_id( const char *ciphersuite_name ); /** * \brief Initialize an SSL context * Just makes the context ready for mbedtls_ssl_setup() or * mbedtls_ssl_free() * * \param ssl SSL context */ void mbedtls_ssl_init( mbedtls_ssl_context *ssl ); /** * \brief Set up an SSL context for use * * \note No copy of the configuration context is made, it can be * shared by many mbedtls_ssl_context structures. * * \warning Modifying the conf structure after it has been used in this * function is unsupported! * * \param ssl SSL context * \param conf SSL configuration to use * * \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED if * memory allocation failed */ int mbedtls_ssl_setup( mbedtls_ssl_context *ssl, const mbedtls_ssl_config *conf ); /** * \brief Reset an already initialized SSL context for re-use * while retaining application-set variables, function * pointers and data. * * \param ssl SSL context * \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED, MBEDTLS_ERR_SSL_HW_ACCEL_FAILED or * MBEDTLS_ERR_SSL_COMPRESSION_FAILED */ int mbedtls_ssl_session_reset( mbedtls_ssl_context *ssl ); /** * \brief Set the current endpoint type * * \param conf SSL configuration * \param endpoint must be MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER */ void mbedtls_ssl_conf_endpoint( mbedtls_ssl_config *conf, int endpoint ); /** * \brief Set the transport type (TLS or DTLS). * Default: TLS * * \note For DTLS, you must either provide a recv callback that * doesn't block, or one that handles timeouts, see * \c mbedtls_ssl_set_bio(). You also need to provide timer * callbacks with \c mbedtls_ssl_set_timer_cb(). * * \param conf SSL configuration * \param transport transport type: * MBEDTLS_SSL_TRANSPORT_STREAM for TLS, * MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS. */ void mbedtls_ssl_conf_transport( mbedtls_ssl_config *conf, int transport ); /** * \brief Set the certificate verification mode * Default: NONE on server, REQUIRED on client * * \param conf SSL configuration * \param authmode can be: * * MBEDTLS_SSL_VERIFY_NONE: peer certificate is not checked * (default on server) * (insecure on client) * * MBEDTLS_SSL_VERIFY_OPTIONAL: peer certificate is checked, however the * handshake continues even if verification failed; * mbedtls_ssl_get_verify_result() can be called after the * handshake is complete. * * MBEDTLS_SSL_VERIFY_REQUIRED: peer *must* present a valid certificate, * handshake is aborted if verification failed. * (default on client) * * \note On client, MBEDTLS_SSL_VERIFY_REQUIRED is the recommended mode. * With MBEDTLS_SSL_VERIFY_OPTIONAL, the user needs to call mbedtls_ssl_get_verify_result() at * the right time(s), which may not be obvious, while REQUIRED always perform * the verification as soon as possible. For example, REQUIRED was protecting * against the "triple handshake" attack even before it was found. */ void mbedtls_ssl_conf_authmode( mbedtls_ssl_config *conf, int authmode ); #if defined(MBEDTLS_X509_CRT_PARSE_C) /** * \brief Set the verification callback (Optional). * * If set, the verify callback is called for each * certificate in the chain. For implementation * information, please see \c x509parse_verify() * * \param conf SSL configuration * \param f_vrfy verification function * \param p_vrfy verification parameter */ void mbedtls_ssl_conf_verify( mbedtls_ssl_config *conf, int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), void *p_vrfy ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ /** * \brief Set the random number generator callback * * \param conf SSL configuration * \param f_rng RNG function * \param p_rng RNG parameter */ void mbedtls_ssl_conf_rng( mbedtls_ssl_config *conf, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); /** * \brief Set the debug callback * * The callback has the following argument: * void * opaque context for the callback * int debug level * const char * file name * int line number * const char * message * * \param conf SSL configuration * \param f_dbg debug function * \param p_dbg debug parameter */ void mbedtls_ssl_conf_dbg( mbedtls_ssl_config *conf, void (*f_dbg)(void *, int, const char *, int, const char *), void *p_dbg ); /** * \brief Set the underlying BIO callbacks for write, read and * read-with-timeout. * * \param ssl SSL context * \param p_bio parameter (context) shared by BIO callbacks * \param f_send write callback * \param f_recv read callback * \param f_recv_timeout blocking read callback with timeout. * * \note One of f_recv or f_recv_timeout can be NULL, in which case * the other is used. If both are non-NULL, f_recv_timeout is * used and f_recv is ignored (as if it were NULL). * * \note The two most common use cases are: * - non-blocking I/O, f_recv != NULL, f_recv_timeout == NULL * - blocking I/O, f_recv == NULL, f_recv_timout != NULL * * \note For DTLS, you need to provide either a non-NULL * f_recv_timeout callback, or a f_recv that doesn't block. * * \note See the documentations of \c mbedtls_ssl_sent_t, * \c mbedtls_ssl_recv_t and \c mbedtls_ssl_recv_timeout_t for * the conventions those callbacks must follow. * * \note On some platforms, net_sockets.c provides * \c mbedtls_net_send(), \c mbedtls_net_recv() and * \c mbedtls_net_recv_timeout() that are suitable to be used * here. */ void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl, void *p_bio, mbedtls_ssl_send_t *f_send, mbedtls_ssl_recv_t *f_recv, mbedtls_ssl_recv_timeout_t *f_recv_timeout ); /** * \brief Set the timeout period for mbedtls_ssl_read() * (Default: no timeout.) * * \param conf SSL configuration context * \param timeout Timeout value in milliseconds. * Use 0 for no timeout (default). * * \note With blocking I/O, this will only work if a non-NULL * \c f_recv_timeout was set with \c mbedtls_ssl_set_bio(). * With non-blocking I/O, this will only work if timer * callbacks were set with \c mbedtls_ssl_set_timer_cb(). * * \note With non-blocking I/O, you may also skip this function * altogether and handle timeouts at the application layer. */ void mbedtls_ssl_conf_read_timeout( mbedtls_ssl_config *conf, uint32_t timeout ); /** * \brief Set the timer callbacks (Mandatory for DTLS.) * * \param ssl SSL context * \param p_timer parameter (context) shared by timer callbacks * \param f_set_timer set timer callback * \param f_get_timer get timer callback. Must return: * * \note See the documentation of \c mbedtls_ssl_set_timer_t and * \c mbedtls_ssl_get_timer_t for the conventions this pair of * callbacks must fallow. * * \note On some platforms, timing.c provides * \c mbedtls_timing_set_delay() and * \c mbedtls_timing_get_delay() that are suitable for using * here, except if using an event-driven style. * * \note See also the "DTLS tutorial" article in our knowledge base. * https://tls.mbed.org/kb/how-to/dtls-tutorial */ void mbedtls_ssl_set_timer_cb( mbedtls_ssl_context *ssl, void *p_timer, mbedtls_ssl_set_timer_t *f_set_timer, mbedtls_ssl_get_timer_t *f_get_timer ); /** * \brief Callback type: generate and write session ticket * * \note This describes what a callback implementation should do. * This callback should generate an encrypted and * authenticated ticket for the session and write it to the * output buffer. Here, ticket means the opaque ticket part * of the NewSessionTicket structure of RFC 5077. * * \param p_ticket Context for the callback * \param session SSL session to be written in the ticket * \param start Start of the output buffer * \param end End of the output buffer * \param tlen On exit, holds the length written * \param lifetime On exit, holds the lifetime of the ticket in seconds * * \return 0 if successful, or * a specific MBEDTLS_ERR_XXX code. */ typedef int mbedtls_ssl_ticket_write_t( void *p_ticket, const mbedtls_ssl_session *session, unsigned char *start, const unsigned char *end, size_t *tlen, uint32_t *lifetime ); #if defined(MBEDTLS_SSL_EXPORT_KEYS) /** * \brief Callback type: Export key block and master secret * * \note This is required for certain uses of TLS, e.g. EAP-TLS * (RFC 5216) and Thread. The key pointers are ephemeral and * therefore must not be stored. The master secret and keys * should not be used directly except as an input to a key * derivation function. * * \param p_expkey Context for the callback * \param ms Pointer to master secret (fixed length: 48 bytes) * \param kb Pointer to key block, see RFC 5246 section 6.3 * (variable length: 2 * maclen + 2 * keylen + 2 * ivlen). * \param maclen MAC length * \param keylen Key length * \param ivlen IV length * * \return 0 if successful, or * a specific MBEDTLS_ERR_XXX code. */ typedef int mbedtls_ssl_export_keys_t( void *p_expkey, const unsigned char *ms, const unsigned char *kb, size_t maclen, size_t keylen, size_t ivlen ); #endif /* MBEDTLS_SSL_EXPORT_KEYS */ /** * \brief Callback type: parse and load session ticket * * \note This describes what a callback implementation should do. * This callback should parse a session ticket as generated * by the corresponding mbedtls_ssl_ticket_write_t function, * and, if the ticket is authentic and valid, load the * session. * * \note The implementation is allowed to modify the first len * bytes of the input buffer, eg to use it as a temporary * area for the decrypted ticket contents. * * \param p_ticket Context for the callback * \param session SSL session to be loaded * \param buf Start of the buffer containing the ticket * \param len Length of the ticket. * * \return 0 if successful, or * MBEDTLS_ERR_SSL_INVALID_MAC if not authentic, or * MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED if expired, or * any other non-zero code for other failures. */ typedef int mbedtls_ssl_ticket_parse_t( void *p_ticket, mbedtls_ssl_session *session, unsigned char *buf, size_t len ); #if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C) /** * \brief Configure SSL session ticket callbacks (server only). * (Default: none.) * * \note On server, session tickets are enabled by providing * non-NULL callbacks. * * \note On client, use \c mbedtls_ssl_conf_session_tickets(). * * \param conf SSL configuration context * \param f_ticket_write Callback for writing a ticket * \param f_ticket_parse Callback for parsing a ticket * \param p_ticket Context shared by the two callbacks */ void mbedtls_ssl_conf_session_tickets_cb( mbedtls_ssl_config *conf, mbedtls_ssl_ticket_write_t *f_ticket_write, mbedtls_ssl_ticket_parse_t *f_ticket_parse, void *p_ticket ); #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */ #if defined(MBEDTLS_SSL_EXPORT_KEYS) /** * \brief Configure key export callback. * (Default: none.) * * \note See \c mbedtls_ssl_export_keys_t. * * \param conf SSL configuration context * \param f_export_keys Callback for exporting keys * \param p_export_keys Context for the callback */ void mbedtls_ssl_conf_export_keys_cb( mbedtls_ssl_config *conf, mbedtls_ssl_export_keys_t *f_export_keys, void *p_export_keys ); #endif /* MBEDTLS_SSL_EXPORT_KEYS */ /** * \brief Callback type: generate a cookie * * \param ctx Context for the callback * \param p Buffer to write to, * must be updated to point right after the cookie * \param end Pointer to one past the end of the output buffer * \param info Client ID info that was passed to * \c mbedtls_ssl_set_client_transport_id() * \param ilen Length of info in bytes * * \return The callback must return 0 on success, * or a negative error code. */ typedef int mbedtls_ssl_cookie_write_t( void *ctx, unsigned char **p, unsigned char *end, const unsigned char *info, size_t ilen ); /** * \brief Callback type: verify a cookie * * \param ctx Context for the callback * \param cookie Cookie to verify * \param clen Length of cookie * \param info Client ID info that was passed to * \c mbedtls_ssl_set_client_transport_id() * \param ilen Length of info in bytes * * \return The callback must return 0 if cookie is valid, * or a negative error code. */ typedef int mbedtls_ssl_cookie_check_t( void *ctx, const unsigned char *cookie, size_t clen, const unsigned char *info, size_t ilen ); #if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) /** * \brief Register callbacks for DTLS cookies * (Server only. DTLS only.) * * Default: dummy callbacks that fail, in order to force you to * register working callbacks (and initialize their context). * * To disable HelloVerifyRequest, register NULL callbacks. * * \warning Disabling hello verification allows your server to be used * for amplification in DoS attacks against other hosts. * Only disable if you known this can't happen in your * particular environment. * * \note See comments on \c mbedtls_ssl_handshake() about handling * the MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED that is expected * on the first handshake attempt when this is enabled. * * \note This is also necessary to handle client reconnection from * the same port as described in RFC 6347 section 4.2.8 (only * the variant with cookies is supported currently). See * comments on \c mbedtls_ssl_read() for details. * * \param conf SSL configuration * \param f_cookie_write Cookie write callback * \param f_cookie_check Cookie check callback * \param p_cookie Context for both callbacks */ void mbedtls_ssl_conf_dtls_cookies( mbedtls_ssl_config *conf, mbedtls_ssl_cookie_write_t *f_cookie_write, mbedtls_ssl_cookie_check_t *f_cookie_check, void *p_cookie ); /** * \brief Set client's transport-level identification info. * (Server only. DTLS only.) * * This is usually the IP address (and port), but could be * anything identify the client depending on the underlying * network stack. Used for HelloVerifyRequest with DTLS. * This is *not* used to route the actual packets. * * \param ssl SSL context * \param info Transport-level info identifying the client (eg IP + port) * \param ilen Length of info in bytes * * \note An internal copy is made, so the info buffer can be reused. * * \return 0 on success, * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used on client, * MBEDTLS_ERR_SSL_ALLOC_FAILED if out of memory. */ int mbedtls_ssl_set_client_transport_id( mbedtls_ssl_context *ssl, const unsigned char *info, size_t ilen ); #endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */ #if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) /** * \brief Enable or disable anti-replay protection for DTLS. * (DTLS only, no effect on TLS.) * Default: enabled. * * \param conf SSL configuration * \param mode MBEDTLS_SSL_ANTI_REPLAY_ENABLED or MBEDTLS_SSL_ANTI_REPLAY_DISABLED. * * \warning Disabling this is a security risk unless the application * protocol handles duplicated packets in a safe way. You * should not disable this without careful consideration. * However, if your application already detects duplicated * packets and needs information about them to adjust its * transmission strategy, then you'll want to disable this. */ void mbedtls_ssl_conf_dtls_anti_replay( mbedtls_ssl_config *conf, char mode ); #endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */ #if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) /** * \brief Set a limit on the number of records with a bad MAC * before terminating the connection. * (DTLS only, no effect on TLS.) * Default: 0 (disabled). * * \param conf SSL configuration * \param limit Limit, or 0 to disable. * * \note If the limit is N, then the connection is terminated when * the Nth non-authentic record is seen. * * \note Records with an invalid header are not counted, only the * ones going through the authentication-decryption phase. * * \note This is a security trade-off related to the fact that it's * often relatively easy for an active attacker ot inject UDP * datagrams. On one hand, setting a low limit here makes it * easier for such an attacker to forcibly terminated a * connection. On the other hand, a high limit or no limit * might make us waste resources checking authentication on * many bogus packets. */ void mbedtls_ssl_conf_dtls_badmac_limit( mbedtls_ssl_config *conf, unsigned limit ); #endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */ #if defined(MBEDTLS_SSL_PROTO_DTLS) /** * \brief Set retransmit timeout values for the DTLS handshake. * (DTLS only, no effect on TLS.) * * \param conf SSL configuration * \param min Initial timeout value in milliseconds. * Default: 1000 (1 second). * \param max Maximum timeout value in milliseconds. * Default: 60000 (60 seconds). * * \note Default values are from RFC 6347 section 4.2.4.1. * * \note The 'min' value should typically be slightly above the * expected round-trip time to your peer, plus whatever time * it takes for the peer to process the message. For example, * if your RTT is about 600ms and you peer needs up to 1s to * do the cryptographic operations in the handshake, then you * should set 'min' slightly above 1600. Lower values of 'min' * might cause spurious resends which waste network resources, * while larger value of 'min' will increase overall latency * on unreliable network links. * * \note The more unreliable your network connection is, the larger * your max / min ratio needs to be in order to achieve * reliable handshakes. * * \note Messages are retransmitted up to log2(ceil(max/min)) times. * For example, if min = 1s and max = 5s, the retransmit plan * goes: send ... 1s -> resend ... 2s -> resend ... 4s -> * resend ... 5s -> give up and return a timeout error. */ void mbedtls_ssl_conf_handshake_timeout( mbedtls_ssl_config *conf, uint32_t min, uint32_t max ); #endif /* MBEDTLS_SSL_PROTO_DTLS */ #if defined(MBEDTLS_SSL_SRV_C) /** * \brief Set the session cache callbacks (server-side only) * If not set, no session resuming is done (except if session * tickets are enabled too). * * The session cache has the responsibility to check for stale * entries based on timeout. See RFC 5246 for recommendations. * * Warning: session.peer_cert is cleared by the SSL/TLS layer on * connection shutdown, so do not cache the pointer! Either set * it to NULL or make a full copy of the certificate. * * The get callback is called once during the initial handshake * to enable session resuming. The get function has the * following parameters: (void *parameter, mbedtls_ssl_session *session) * If a valid entry is found, it should fill the master of * the session object with the cached values and return 0, * return 1 otherwise. Optionally peer_cert can be set as well * if it is properly present in cache entry. * * The set callback is called once during the initial handshake * to enable session resuming after the entire handshake has * been finished. The set function has the following parameters: * (void *parameter, const mbedtls_ssl_session *session). The function * should create a cache entry for future retrieval based on * the data in the session structure and should keep in mind * that the mbedtls_ssl_session object presented (and all its referenced * data) is cleared by the SSL/TLS layer when the connection is * terminated. It is recommended to add metadata to determine if * an entry is still valid in the future. Return 0 if * successfully cached, return 1 otherwise. * * \param conf SSL configuration * \param p_cache parmater (context) for both callbacks * \param f_get_cache session get callback * \param f_set_cache session set callback */ void mbedtls_ssl_conf_session_cache( mbedtls_ssl_config *conf, void *p_cache, int (*f_get_cache)(void *, mbedtls_ssl_session *), int (*f_set_cache)(void *, const mbedtls_ssl_session *) ); #endif /* MBEDTLS_SSL_SRV_C */ #if defined(MBEDTLS_SSL_CLI_C) /** * \brief Request resumption of session (client-side only) * Session data is copied from presented session structure. * * \param ssl SSL context * \param session session context * * \return 0 if successful, * MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or * arguments are otherwise invalid * * \sa mbedtls_ssl_get_session() */ int mbedtls_ssl_set_session( mbedtls_ssl_context *ssl, const mbedtls_ssl_session *session ); #endif /* MBEDTLS_SSL_CLI_C */ /** * \brief Set the list of allowed ciphersuites and the preference * order. First in the list has the highest preference. * (Overrides all version-specific lists) * * The ciphersuites array is not copied, and must remain * valid for the lifetime of the ssl_config. * * Note: The server uses its own preferences * over the preference of the client unless * MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE is defined! * * \param conf SSL configuration * \param ciphersuites 0-terminated list of allowed ciphersuites */ void mbedtls_ssl_conf_ciphersuites( mbedtls_ssl_config *conf, const int *ciphersuites ); /** * \brief Set the list of allowed ciphersuites and the * preference order for a specific version of the protocol. * (Only useful on the server side) * * The ciphersuites array is not copied, and must remain * valid for the lifetime of the ssl_config. * * \param conf SSL configuration * \param ciphersuites 0-terminated list of allowed ciphersuites * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 * supported) * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, * MBEDTLS_SSL_MINOR_VERSION_3 supported) * * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 * and MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 */ void mbedtls_ssl_conf_ciphersuites_for_version( mbedtls_ssl_config *conf, const int *ciphersuites, int major, int minor ); #if defined(MBEDTLS_X509_CRT_PARSE_C) /** * \brief Set the X.509 security profile used for verification * * \note The restrictions are enforced for all certificates in the * chain. However, signatures in the handshake are not covered * by this setting but by \b mbedtls_ssl_conf_sig_hashes(). * * \param conf SSL configuration * \param profile Profile to use */ void mbedtls_ssl_conf_cert_profile( mbedtls_ssl_config *conf, const mbedtls_x509_crt_profile *profile ); /** * \brief Set the data required to verify peer certificate * * \param conf SSL configuration * \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs) * \param ca_crl trusted CA CRLs */ void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf, mbedtls_x509_crt *ca_chain, mbedtls_x509_crl *ca_crl ); /** * \brief Set own certificate chain and private key * * \note own_cert should contain in order from the bottom up your * certificate chain. The top certificate (self-signed) * can be omitted. * * \note On server, this function can be called multiple times to * provision more than one cert/key pair (eg one ECDSA, one * RSA with SHA-256, one RSA with SHA-1). An adequate * certificate will be selected according to the client's * advertised capabilities. In case mutliple certificates are * adequate, preference is given to the one set by the first * call to this function, then second, etc. * * \note On client, only the first call has any effect. That is, * only one client certificate can be provisioned. The * server's preferences in its CertficateRequest message will * be ignored and our only cert will be sent regardless of * whether it matches those preferences - the server can then * decide what it wants to do with it. * * \param conf SSL configuration * \param own_cert own public certificate chain * \param pk_key own private key * * \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED */ int mbedtls_ssl_conf_own_cert( mbedtls_ssl_config *conf, mbedtls_x509_crt *own_cert, mbedtls_pk_context *pk_key ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) /** * \brief Set the Pre Shared Key (PSK) and the expected identity name * * \note This is mainly useful for clients. Servers will usually * want to use \c mbedtls_ssl_conf_psk_cb() instead. * * \note Currently clients can only register one pre-shared key. * In other words, the servers' identity hint is ignored. * Support for setting multiple PSKs on clients and selecting * one based on the identity hint is not a planned feature but * feedback is welcomed. * * \param conf SSL configuration * \param psk pointer to the pre-shared key * \param psk_len pre-shared key length * \param psk_identity pointer to the pre-shared key identity * \param psk_identity_len identity key length * * \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED */ int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf, const unsigned char *psk, size_t psk_len, const unsigned char *psk_identity, size_t psk_identity_len ); /** * \brief Set the Pre Shared Key (PSK) for the current handshake * * \note This should only be called inside the PSK callback, * ie the function passed to \c mbedtls_ssl_conf_psk_cb(). * * \param ssl SSL context * \param psk pointer to the pre-shared key * \param psk_len pre-shared key length * * \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED */ int mbedtls_ssl_set_hs_psk( mbedtls_ssl_context *ssl, const unsigned char *psk, size_t psk_len ); /** * \brief Set the PSK callback (server-side only). * * If set, the PSK callback is called for each * handshake where a PSK ciphersuite was negotiated. * The caller provides the identity received and wants to * receive the actual PSK data and length. * * The callback has the following parameters: (void *parameter, * mbedtls_ssl_context *ssl, const unsigned char *psk_identity, * size_t identity_len) * If a valid PSK identity is found, the callback should use * \c mbedtls_ssl_set_hs_psk() on the ssl context to set the * correct PSK and return 0. * Any other return value will result in a denied PSK identity. * * \note If you set a PSK callback using this function, then you * don't need to set a PSK key and identity using * \c mbedtls_ssl_conf_psk(). * * \param conf SSL configuration * \param f_psk PSK identity function * \param p_psk PSK identity parameter */ void mbedtls_ssl_conf_psk_cb( mbedtls_ssl_config *conf, int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, size_t), void *p_psk ); #endif /* MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED */ #if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C) /** * \brief Set the Diffie-Hellman public P and G values, * read as hexadecimal strings (server-side only) * (Default: MBEDTLS_DHM_RFC5114_MODP_2048_[PG]) * * \param conf SSL configuration * \param dhm_P Diffie-Hellman-Merkle modulus * \param dhm_G Diffie-Hellman-Merkle generator * * \return 0 if successful */ int mbedtls_ssl_conf_dh_param( mbedtls_ssl_config *conf, const char *dhm_P, const char *dhm_G ); /** * \brief Set the Diffie-Hellman public P and G values, * read from existing context (server-side only) * * \param conf SSL configuration * \param dhm_ctx Diffie-Hellman-Merkle context * * \return 0 if successful */ int mbedtls_ssl_conf_dh_param_ctx( mbedtls_ssl_config *conf, mbedtls_dhm_context *dhm_ctx ); #endif /* MBEDTLS_DHM_C && defined(MBEDTLS_SSL_SRV_C) */ #if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C) /** * \brief Set the minimum length for Diffie-Hellman parameters. * (Client-side only.) * (Default: 1024 bits.) * * \param conf SSL configuration * \param bitlen Minimum bit length of the DHM prime */ void mbedtls_ssl_conf_dhm_min_bitlen( mbedtls_ssl_config *conf, unsigned int bitlen ); #endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_CLI_C */ #if defined(MBEDTLS_ECP_C) /** * \brief Set the allowed curves in order of preference. * (Default: all defined curves.) * * On server: this only affects selection of the ECDHE curve; * the curves used for ECDH and ECDSA are determined by the * list of available certificates instead. * * On client: this affects the list of curves offered for any * use. The server can override our preference order. * * Both sides: limits the set of curves accepted for use in * ECDHE and in the peer's end-entity certificate. * * \note This has no influence on which curves are allowed inside the * certificate chains, see \c mbedtls_ssl_conf_cert_profile() * for that. For the end-entity certificate however, the key * will be accepted only if it is allowed both by this list * and by the cert profile. * * \note This list should be ordered by decreasing preference * (preferred curve first). * * \param conf SSL configuration * \param curves Ordered list of allowed curves, * terminated by MBEDTLS_ECP_DP_NONE. */ void mbedtls_ssl_conf_curves( mbedtls_ssl_config *conf, const mbedtls_ecp_group_id *curves ); #endif /* MBEDTLS_ECP_C */ #if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) /** * \brief Set the allowed hashes for signatures during the handshake. * (Default: all available hashes except MD5.) * * \note This only affects which hashes are offered and can be used * for signatures during the handshake. Hashes for message * authentication and the TLS PRF are controlled by the * ciphersuite, see \c mbedtls_ssl_conf_ciphersuites(). Hashes * used for certificate signature are controlled by the * verification profile, see \c mbedtls_ssl_conf_cert_profile(). * * \note This list should be ordered by decreasing preference * (preferred hash first). * * \param conf SSL configuration * \param hashes Ordered list of allowed signature hashes, * terminated by \c MBEDTLS_MD_NONE. */ void mbedtls_ssl_conf_sig_hashes( mbedtls_ssl_config *conf, const int *hashes ); #endif /* MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */ #if defined(MBEDTLS_X509_CRT_PARSE_C) /** * \brief Set the hostname to check against the received server * certificate. It sets the ServerName TLS extension too, * if the extension is enabled. * (client-side only) * * \param ssl SSL context * \param hostname the server hostname * * \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED */ int mbedtls_ssl_set_hostname( mbedtls_ssl_context *ssl, const char *hostname ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) /** * \brief Set own certificate and key for the current handshake * * \note Same as \c mbedtls_ssl_conf_own_cert() but for use within * the SNI callback. * * \param ssl SSL context * \param own_cert own public certificate chain * \param pk_key own private key * * \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED */ int mbedtls_ssl_set_hs_own_cert( mbedtls_ssl_context *ssl, mbedtls_x509_crt *own_cert, mbedtls_pk_context *pk_key ); /** * \brief Set the data required to verify peer certificate for the * current handshake * * \note Same as \c mbedtls_ssl_conf_ca_chain() but for use within * the SNI callback. * * \param ssl SSL context * \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs) * \param ca_crl trusted CA CRLs */ void mbedtls_ssl_set_hs_ca_chain( mbedtls_ssl_context *ssl, mbedtls_x509_crt *ca_chain, mbedtls_x509_crl *ca_crl ); /** * \brief Set authmode for the current handshake. * * \note Same as \c mbedtls_ssl_conf_authmode() but for use within * the SNI callback. * * \param ssl SSL context * \param authmode MBEDTLS_SSL_VERIFY_NONE, MBEDTLS_SSL_VERIFY_OPTIONAL or * MBEDTLS_SSL_VERIFY_REQUIRED */ void mbedtls_ssl_set_hs_authmode( mbedtls_ssl_context *ssl, int authmode ); /** * \brief Set server side ServerName TLS extension callback * (optional, server-side only). * * If set, the ServerName callback is called whenever the * server receives a ServerName TLS extension from the client * during a handshake. The ServerName callback has the * following parameters: (void *parameter, mbedtls_ssl_context *ssl, * const unsigned char *hostname, size_t len). If a suitable * certificate is found, the callback must set the * certificate(s) and key(s) to use with \c * mbedtls_ssl_set_hs_own_cert() (can be called repeatedly), * and may optionally adjust the CA and associated CRL with \c * mbedtls_ssl_set_hs_ca_chain() as well as the client * authentication mode with \c mbedtls_ssl_set_hs_authmode(), * then must return 0. If no matching name is found, the * callback must either set a default cert, or * return non-zero to abort the handshake at this point. * * \param conf SSL configuration * \param f_sni verification function * \param p_sni verification parameter */ void mbedtls_ssl_conf_sni( mbedtls_ssl_config *conf, int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, size_t), void *p_sni ); #endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ #if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) /** * \brief Set the EC J-PAKE password for current handshake. * * \note An internal copy is made, and destroyed as soon as the * handshake is completed, or when the SSL context is reset or * freed. * * \note The SSL context needs to be already set up. The right place * to call this function is between \c mbedtls_ssl_setup() or * \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake(). * * \param ssl SSL context * \param pw EC J-PAKE password (pre-shared secret) * \param pw_len length of pw in bytes * * \return 0 on success, or a negative error code. */ int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl, const unsigned char *pw, size_t pw_len ); #endif /*MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */ #if defined(MBEDTLS_SSL_ALPN) /** * \brief Set the supported Application Layer Protocols. * * \param conf SSL configuration * \param protos Pointer to a NULL-terminated list of supported protocols, * in decreasing preference order. The pointer to the list is * recorded by the library for later reference as required, so * the lifetime of the table must be atleast as long as the * lifetime of the SSL configuration structure. * * \return 0 on success, or MBEDTLS_ERR_SSL_BAD_INPUT_DATA. */ int mbedtls_ssl_conf_alpn_protocols( mbedtls_ssl_config *conf, const char **protos ); /** * \brief Get the name of the negotiated Application Layer Protocol. * This function should be called after the handshake is * completed. * * \param ssl SSL context * * \return Protcol name, or NULL if no protocol was negotiated. */ const char *mbedtls_ssl_get_alpn_protocol( const mbedtls_ssl_context *ssl ); #endif /* MBEDTLS_SSL_ALPN */ /** * \brief Set the maximum supported version sent from the client side * and/or accepted at the server side * (Default: MBEDTLS_SSL_MAX_MAJOR_VERSION, MBEDTLS_SSL_MAX_MINOR_VERSION) * * \note This ignores ciphersuites from higher versions. * * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and * MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 * * \param conf SSL configuration * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported) * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, * MBEDTLS_SSL_MINOR_VERSION_3 supported) */ void mbedtls_ssl_conf_max_version( mbedtls_ssl_config *conf, int major, int minor ); /** * \brief Set the minimum accepted SSL/TLS protocol version * (Default: TLS 1.0) * * \note Input outside of the SSL_MAX_XXXXX_VERSION and * SSL_MIN_XXXXX_VERSION range is ignored. * * \note MBEDTLS_SSL_MINOR_VERSION_0 (SSL v3) should be avoided. * * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and * MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 * * \param conf SSL configuration * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported) * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, * MBEDTLS_SSL_MINOR_VERSION_3 supported) */ void mbedtls_ssl_conf_min_version( mbedtls_ssl_config *conf, int major, int minor ); #if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C) /** * \brief Set the fallback flag (client-side only). * (Default: MBEDTLS_SSL_IS_NOT_FALLBACK). * * \note Set to MBEDTLS_SSL_IS_FALLBACK when preparing a fallback * connection, that is a connection with max_version set to a * lower value than the value you're willing to use. Such * fallback connections are not recommended but are sometimes * necessary to interoperate with buggy (version-intolerant) * servers. * * \warning You should NOT set this to MBEDTLS_SSL_IS_FALLBACK for * non-fallback connections! This would appear to work for a * while, then cause failures when the server is upgraded to * support a newer TLS version. * * \param conf SSL configuration * \param fallback MBEDTLS_SSL_IS_NOT_FALLBACK or MBEDTLS_SSL_IS_FALLBACK */ void mbedtls_ssl_conf_fallback( mbedtls_ssl_config *conf, char fallback ); #endif /* MBEDTLS_SSL_FALLBACK_SCSV && MBEDTLS_SSL_CLI_C */ #if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) /** * \brief Enable or disable Encrypt-then-MAC * (Default: MBEDTLS_SSL_ETM_ENABLED) * * \note This should always be enabled, it is a security * improvement, and should not cause any interoperability * issue (used only if the peer supports it too). * * \param conf SSL configuration * \param etm MBEDTLS_SSL_ETM_ENABLED or MBEDTLS_SSL_ETM_DISABLED */ void mbedtls_ssl_conf_encrypt_then_mac( mbedtls_ssl_config *conf, char etm ); #endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */ #if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) /** * \brief Enable or disable Extended Master Secret negotiation. * (Default: MBEDTLS_SSL_EXTENDED_MS_ENABLED) * * \note This should always be enabled, it is a security fix to the * protocol, and should not cause any interoperability issue * (used only if the peer supports it too). * * \param conf SSL configuration * \param ems MBEDTLS_SSL_EXTENDED_MS_ENABLED or MBEDTLS_SSL_EXTENDED_MS_DISABLED */ void mbedtls_ssl_conf_extended_master_secret( mbedtls_ssl_config *conf, char ems ); #endif /* MBEDTLS_SSL_EXTENDED_MASTER_SECRET */ #if defined(MBEDTLS_ARC4_C) /** * \brief Disable or enable support for RC4 * (Default: MBEDTLS_SSL_ARC4_DISABLED) * * \warning Use of RC4 in DTLS/TLS has been prohibited by RFC 7465 * for security reasons. Use at your own risk. * * \note This function is deprecated and will likely be removed in * a future version of the library. * RC4 is disabled by default at compile time and needs to be * actively enabled for use with legacy systems. * * \param conf SSL configuration * \param arc4 MBEDTLS_SSL_ARC4_ENABLED or MBEDTLS_SSL_ARC4_DISABLED */ void mbedtls_ssl_conf_arc4_support( mbedtls_ssl_config *conf, char arc4 ); #endif /* MBEDTLS_ARC4_C */ #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) /** * \brief Set the maximum fragment length to emit and/or negotiate * (Default: MBEDTLS_SSL_MAX_CONTENT_LEN, usually 2^14 bytes) * (Server: set maximum fragment length to emit, * usually negotiated by the client during handshake * (Client: set maximum fragment length to emit *and* * negotiate with the server during handshake) * * \param conf SSL configuration * \param mfl_code Code for maximum fragment length (allowed values: * MBEDTLS_SSL_MAX_FRAG_LEN_512, MBEDTLS_SSL_MAX_FRAG_LEN_1024, * MBEDTLS_SSL_MAX_FRAG_LEN_2048, MBEDTLS_SSL_MAX_FRAG_LEN_4096) * * \return 0 if successful or MBEDTLS_ERR_SSL_BAD_INPUT_DATA */ int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code ); #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ #if defined(MBEDTLS_SSL_TRUNCATED_HMAC) /** * \brief Activate negotiation of truncated HMAC * (Default: MBEDTLS_SSL_TRUNC_HMAC_DISABLED) * * \param conf SSL configuration * \param truncate Enable or disable (MBEDTLS_SSL_TRUNC_HMAC_ENABLED or * MBEDTLS_SSL_TRUNC_HMAC_DISABLED) */ void mbedtls_ssl_conf_truncated_hmac( mbedtls_ssl_config *conf, int truncate ); #endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ #if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) /** * \brief Enable / Disable 1/n-1 record splitting * (Default: MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED) * * \note Only affects SSLv3 and TLS 1.0, not higher versions. * Does not affect non-CBC ciphersuites in any version. * * \param conf SSL configuration * \param split MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED or * MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED */ void mbedtls_ssl_conf_cbc_record_splitting( mbedtls_ssl_config *conf, char split ); #endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */ #if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) /** * \brief Enable / Disable session tickets (client only). * (Default: MBEDTLS_SSL_SESSION_TICKETS_ENABLED.) * * \note On server, use \c mbedtls_ssl_conf_session_tickets_cb(). * * \param conf SSL configuration * \param use_tickets Enable or disable (MBEDTLS_SSL_SESSION_TICKETS_ENABLED or * MBEDTLS_SSL_SESSION_TICKETS_DISABLED) */ void mbedtls_ssl_conf_session_tickets( mbedtls_ssl_config *conf, int use_tickets ); #endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ #if defined(MBEDTLS_SSL_RENEGOTIATION) /** * \brief Enable / Disable renegotiation support for connection when * initiated by peer * (Default: MBEDTLS_SSL_RENEGOTIATION_DISABLED) * * \warning It is recommended to always disable renegotation unless you * know you need it and you know what you're doing. In the * past, there have been several issues associated with * renegotiation or a poor understanding of its properties. * * \note Server-side, enabling renegotiation also makes the server * susceptible to a resource DoS by a malicious client. * * \param conf SSL configuration * \param renegotiation Enable or disable (MBEDTLS_SSL_RENEGOTIATION_ENABLED or * MBEDTLS_SSL_RENEGOTIATION_DISABLED) */ void mbedtls_ssl_conf_renegotiation( mbedtls_ssl_config *conf, int renegotiation ); #endif /* MBEDTLS_SSL_RENEGOTIATION */ /** * \brief Prevent or allow legacy renegotiation. * (Default: MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION) * * MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION allows connections to * be established even if the peer does not support * secure renegotiation, but does not allow renegotiation * to take place if not secure. * (Interoperable and secure option) * * MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION allows renegotiations * with non-upgraded peers. Allowing legacy renegotiation * makes the connection vulnerable to specific man in the * middle attacks. (See RFC 5746) * (Most interoperable and least secure option) * * MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE breaks off connections * if peer does not support secure renegotiation. Results * in interoperability issues with non-upgraded peers * that do not support renegotiation altogether. * (Most secure option, interoperability issues) * * \param conf SSL configuration * \param allow_legacy Prevent or allow (SSL_NO_LEGACY_RENEGOTIATION, * SSL_ALLOW_LEGACY_RENEGOTIATION or * MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE) */ void mbedtls_ssl_conf_legacy_renegotiation( mbedtls_ssl_config *conf, int allow_legacy ); #if defined(MBEDTLS_SSL_RENEGOTIATION) /** * \brief Enforce renegotiation requests. * (Default: enforced, max_records = 16) * * When we request a renegotiation, the peer can comply or * ignore the request. This function allows us to decide * whether to enforce our renegotiation requests by closing * the connection if the peer doesn't comply. * * However, records could already be in transit from the peer * when the request is emitted. In order to increase * reliability, we can accept a number of records before the * expected handshake records. * * The optimal value is highly dependent on the specific usage * scenario. * * \note With DTLS and server-initiated renegotiation, the * HelloRequest is retransmited every time mbedtls_ssl_read() times * out or receives Application Data, until: * - max_records records have beens seen, if it is >= 0, or * - the number of retransmits that would happen during an * actual handshake has been reached. * Please remember the request might be lost a few times * if you consider setting max_records to a really low value. * * \warning On client, the grace period can only happen during * mbedtls_ssl_read(), as opposed to mbedtls_ssl_write() and mbedtls_ssl_renegotiate() * which always behave as if max_record was 0. The reason is, * if we receive application data from the server, we need a * place to write it, which only happens during mbedtls_ssl_read(). * * \param conf SSL configuration * \param max_records Use MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED if you don't want to * enforce renegotiation, or a non-negative value to enforce * it but allow for a grace period of max_records records. */ void mbedtls_ssl_conf_renegotiation_enforced( mbedtls_ssl_config *conf, int max_records ); /** * \brief Set record counter threshold for periodic renegotiation. * (Default: 2^64 - 256.) * * Renegotiation is automatically triggered when a record * counter (outgoing or ingoing) crosses the defined * threshold. The default value is meant to prevent the * connection from being closed when the counter is about to * reached its maximal value (it is not allowed to wrap). * * Lower values can be used to enforce policies such as "keys * must be refreshed every N packets with cipher X". * * \param conf SSL configuration * \param period The threshold value: a big-endian 64-bit number. * Set to 2^64 - 1 to disable periodic renegotiation */ void mbedtls_ssl_conf_renegotiation_period( mbedtls_ssl_config *conf, const unsigned char period[8] ); #endif /* MBEDTLS_SSL_RENEGOTIATION */ /** * \brief Return the number of data bytes available to read * * \param ssl SSL context * * \return how many bytes are available in the read buffer */ size_t mbedtls_ssl_get_bytes_avail( const mbedtls_ssl_context *ssl ); /** * \brief Return the result of the certificate verification * * \param ssl SSL context * * \return 0 if successful, * -1 if result is not available (eg because the handshake was * aborted too early), or * a combination of BADCERT_xxx and BADCRL_xxx flags, see * x509.h */ uint32_t mbedtls_ssl_get_verify_result( const mbedtls_ssl_context *ssl ); /** * \brief Return the name of the current ciphersuite * * \param ssl SSL context * * \return a string containing the ciphersuite name */ const char *mbedtls_ssl_get_ciphersuite( const mbedtls_ssl_context *ssl ); /** * \brief Return the current SSL version (SSLv3/TLSv1/etc) * * \param ssl SSL context * * \return a string containing the SSL version */ const char *mbedtls_ssl_get_version( const mbedtls_ssl_context *ssl ); /** * \brief Return the (maximum) number of bytes added by the record * layer: header + encryption/MAC overhead (inc. padding) * * \param ssl SSL context * * \return Current maximum record expansion in bytes, or * MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE if compression is * enabled, which makes expansion much less predictable */ int mbedtls_ssl_get_record_expansion( const mbedtls_ssl_context *ssl ); #if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) /** * \brief Return the maximum fragment length (payload, in bytes). * This is the value negotiated with peer if any, * or the locally configured value. * * \note With DTLS, \c mbedtls_ssl_write() will return an error if * called with a larger length value. * With TLS, \c mbedtls_ssl_write() will fragment the input if * necessary and return the number of bytes written; it is up * to the caller to call \c mbedtls_ssl_write() again in * order to send the remaining bytes if any. * * \param ssl SSL context * * \return Current maximum fragment length. */ size_t mbedtls_ssl_get_max_frag_len( const mbedtls_ssl_context *ssl ); #endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ #if defined(MBEDTLS_X509_CRT_PARSE_C) /** * \brief Return the peer certificate from the current connection * * Note: Can be NULL in case no certificate was sent during * the handshake. Different calls for the same connection can * return the same or different pointers for the same * certificate and even a different certificate altogether. * The peer cert CAN change in a single connection if * renegotiation is performed. * * \param ssl SSL context * * \return the current peer certificate */ const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl ); #endif /* MBEDTLS_X509_CRT_PARSE_C */ #if defined(MBEDTLS_SSL_CLI_C) /** * \brief Save session in order to resume it later (client-side only) * Session data is copied to presented session structure. * * \warning Currently, peer certificate is lost in the operation. * * \param ssl SSL context * \param session session context * * \return 0 if successful, * MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or * arguments are otherwise invalid * * \sa mbedtls_ssl_set_session() */ int mbedtls_ssl_get_session( const mbedtls_ssl_context *ssl, mbedtls_ssl_session *session ); #endif /* MBEDTLS_SSL_CLI_C */ /** * \brief Perform the SSL handshake * * \param ssl SSL context * * \return 0 if successful, or * MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or * MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED (see below), or * a specific SSL error code. * * \note If this function returns something other than 0 or * MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. * * \note If DTLS is in use, then you may choose to handle * MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED specially for logging * purposes, as it is an expected return value rather than an * actual error, but you still need to reset/free the context. */ int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl ); /** * \brief Perform a single step of the SSL handshake * * \note The state of the context (ssl->state) will be at * the next state after execution of this function. Do not * call this function if state is MBEDTLS_SSL_HANDSHAKE_OVER. * * \note If this function returns something other than 0 or * MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. * * \param ssl SSL context * * \return 0 if successful, or * MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or * a specific SSL error code. */ int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl ); #if defined(MBEDTLS_SSL_RENEGOTIATION) /** * \brief Initiate an SSL renegotiation on the running connection. * Client: perform the renegotiation right now. * Server: request renegotiation, which will be performed * during the next call to mbedtls_ssl_read() if honored by * client. * * \param ssl SSL context * * \return 0 if successful, or any mbedtls_ssl_handshake() return * value. * * \note If this function returns something other than 0 or * MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. */ int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl ); #endif /* MBEDTLS_SSL_RENEGOTIATION */ /** * \brief Read at most 'len' application data bytes * * \param ssl SSL context * \param buf buffer that will hold the data * \param len maximum number of bytes to read * * \return the number of bytes read, or * 0 for EOF, or * MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or * MBEDTLS_ERR_SSL_CLIENT_RECONNECT (see below), or * another negative error code. * * \note If this function returns something other than a positive * value or MBEDTLS_ERR_SSL_WANT_READ/WRITE or * MBEDTLS_ERR_SSL_CLIENT_RECONNECT, then the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. * * \note When this function return MBEDTLS_ERR_SSL_CLIENT_RECONNECT * (which can only happen server-side), it means that a client * is initiating a new connection using the same source port. * You can either treat that as a connection close and wait * for the client to resend a ClientHello, or directly * continue with \c mbedtls_ssl_handshake() with the same * context (as it has beeen reset internally). Either way, you * should make sure this is seen by the application as a new * connection: application state, if any, should be reset, and * most importantly the identity of the client must be checked * again. WARNING: not validating the identity of the client * again, or not transmitting the new identity to the * application layer, would allow authentication bypass! */ int mbedtls_ssl_read( mbedtls_ssl_context *ssl, unsigned char *buf, size_t len ); /** * \brief Try to write exactly 'len' application data bytes * * \warning This function will do partial writes in some cases. If the * return value is non-negative but less than length, the * function must be called again with updated arguments: * buf + ret, len - ret (if ret is the return value) until * it returns a value equal to the last 'len' argument. * * \param ssl SSL context * \param buf buffer holding the data * \param len how many bytes must be written * * \return the number of bytes actually written (may be less than len), * or MBEDTLS_ERR_SSL_WANT_WRITE of MBEDTLS_ERR_SSL_WANT_READ, * or another negative error code. * * \note If this function returns something other than a positive * value or MBEDTLS_ERR_SSL_WANT_READ/WRITE, the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. * * \note When this function returns MBEDTLS_ERR_SSL_WANT_WRITE/READ, * it must be called later with the *same* arguments, * until it returns a positive value. * * \note If the requested length is greater than the maximum * fragment length (either the built-in limit or the one set * or negotiated with the peer), then: * - with TLS, less bytes than requested are written. * - with DTLS, MBEDTLS_ERR_SSL_BAD_INPUT_DATA is returned. * \c mbedtls_ssl_get_max_frag_len() may be used to query the * active maximum fragment length. */ int mbedtls_ssl_write( mbedtls_ssl_context *ssl, const unsigned char *buf, size_t len ); /** * \brief Send an alert message * * \param ssl SSL context * \param level The alert level of the message * (MBEDTLS_SSL_ALERT_LEVEL_WARNING or MBEDTLS_SSL_ALERT_LEVEL_FATAL) * \param message The alert message (SSL_ALERT_MSG_*) * * \return 0 if successful, or a specific SSL error code. * * \note If this function returns something other than 0 or * MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. */ int mbedtls_ssl_send_alert_message( mbedtls_ssl_context *ssl, unsigned char level, unsigned char message ); /** * \brief Notify the peer that the connection is being closed * * \param ssl SSL context * * \return 0 if successful, or a specific SSL error code. * * \note If this function returns something other than 0 or * MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context * becomes unusable, and you should either free it or call * \c mbedtls_ssl_session_reset() on it before re-using it for * a new connection; the current connection must be closed. */ int mbedtls_ssl_close_notify( mbedtls_ssl_context *ssl ); /** * \brief Free referenced items in an SSL context and clear memory * * \param ssl SSL context */ void mbedtls_ssl_free( mbedtls_ssl_context *ssl ); /** * \brief Initialize an SSL configuration context * Just makes the context ready for * mbedtls_ssl_config_defaults() or mbedtls_ssl_config_free(). * * \note You need to call mbedtls_ssl_config_defaults() unless you * manually set all of the relevent fields yourself. * * \param conf SSL configuration context */ void mbedtls_ssl_config_init( mbedtls_ssl_config *conf ); /** * \brief Load reasonnable default SSL configuration values. * (You need to call mbedtls_ssl_config_init() first.) * * \param conf SSL configuration context * \param endpoint MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER * \param transport MBEDTLS_SSL_TRANSPORT_STREAM for TLS, or * MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS * \param preset a MBEDTLS_SSL_PRESET_XXX value * * \note See \c mbedtls_ssl_conf_transport() for notes on DTLS. * * \return 0 if successful, or * MBEDTLS_ERR_XXX_ALLOC_FAILED on memory allocation error. */ int mbedtls_ssl_config_defaults( mbedtls_ssl_config *conf, int endpoint, int transport, int preset ); /** * \brief Free an SSL configuration context * * \param conf SSL configuration context */ void mbedtls_ssl_config_free( mbedtls_ssl_config *conf ); /** * \brief Initialize SSL session structure * * \param session SSL session */ void mbedtls_ssl_session_init( mbedtls_ssl_session *session ); /** * \brief Free referenced items in an SSL session including the * peer certificate and clear memory * * \param session SSL session */ void mbedtls_ssl_session_free( mbedtls_ssl_session *session ); #ifdef __cplusplus } #endif #endif /* ssl.h */