mbed TLS Build
Diff: include/mbedtls/bignum.h
- Revision:
- 0:cdf462088d13
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/include/mbedtls/bignum.h Thu Jan 05 00:18:44 2017 +0000 @@ -0,0 +1,717 @@ +/** + * \file bignum.h + * + * \brief Multi-precision integer library + * + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_BIGNUM_H +#define MBEDTLS_BIGNUM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#if defined(MBEDTLS_FS_IO) +#include <stdio.h> +#endif + +#define MBEDTLS_ERR_MPI_FILE_IO_ERROR -0x0002 /**< An error occurred while reading from or writing to a file. */ +#define MBEDTLS_ERR_MPI_BAD_INPUT_DATA -0x0004 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_MPI_INVALID_CHARACTER -0x0006 /**< There is an invalid character in the digit string. */ +#define MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL -0x0008 /**< The buffer is too small to write to. */ +#define MBEDTLS_ERR_MPI_NEGATIVE_VALUE -0x000A /**< The input arguments are negative or result in illegal output. */ +#define MBEDTLS_ERR_MPI_DIVISION_BY_ZERO -0x000C /**< The input argument for division is zero, which is not allowed. */ +#define MBEDTLS_ERR_MPI_NOT_ACCEPTABLE -0x000E /**< The input arguments are not acceptable. */ +#define MBEDTLS_ERR_MPI_ALLOC_FAILED -0x0010 /**< Memory allocation failed. */ + +#define MBEDTLS_MPI_CHK(f) do { if( ( ret = f ) != 0 ) goto cleanup; } while( 0 ) + +/* + * Maximum size MPIs are allowed to grow to in number of limbs. + */ +#define MBEDTLS_MPI_MAX_LIMBS 10000 + +#if !defined(MBEDTLS_MPI_WINDOW_SIZE) +/* + * Maximum window size used for modular exponentiation. Default: 6 + * Minimum value: 1. Maximum value: 6. + * + * Result is an array of ( 2 << MBEDTLS_MPI_WINDOW_SIZE ) MPIs used + * for the sliding window calculation. (So 64 by default) + * + * Reduction in size, reduces speed. + */ +#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ +#endif /* !MBEDTLS_MPI_WINDOW_SIZE */ + +#if !defined(MBEDTLS_MPI_MAX_SIZE) +/* + * Maximum size of MPIs allowed in bits and bytes for user-MPIs. + * ( Default: 512 bytes => 4096 bits, Maximum tested: 2048 bytes => 16384 bits ) + * + * Note: Calculations can results temporarily in larger MPIs. So the number + * of limbs required (MBEDTLS_MPI_MAX_LIMBS) is higher. + */ +#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ +#endif /* !MBEDTLS_MPI_MAX_SIZE */ + +#define MBEDTLS_MPI_MAX_BITS ( 8 * MBEDTLS_MPI_MAX_SIZE ) /**< Maximum number of bits for usable MPIs. */ + +/* + * When reading from files with mbedtls_mpi_read_file() and writing to files with + * mbedtls_mpi_write_file() the buffer should have space + * for a (short) label, the MPI (in the provided radix), the newline + * characters and the '\0'. + * + * By default we assume at least a 10 char label, a minimum radix of 10 + * (decimal) and a maximum of 4096 bit numbers (1234 decimal chars). + * Autosized at compile time for at least a 10 char label, a minimum radix + * of 10 (decimal) for a number of MBEDTLS_MPI_MAX_BITS size. + * + * This used to be statically sized to 1250 for a maximum of 4096 bit + * numbers (1234 decimal chars). + * + * Calculate using the formula: + * MBEDTLS_MPI_RW_BUFFER_SIZE = ceil(MBEDTLS_MPI_MAX_BITS / ln(10) * ln(2)) + + * LabelSize + 6 + */ +#define MBEDTLS_MPI_MAX_BITS_SCALE100 ( 100 * MBEDTLS_MPI_MAX_BITS ) +#define MBEDTLS_LN_2_DIV_LN_10_SCALE100 332 +#define MBEDTLS_MPI_RW_BUFFER_SIZE ( ((MBEDTLS_MPI_MAX_BITS_SCALE100 + MBEDTLS_LN_2_DIV_LN_10_SCALE100 - 1) / MBEDTLS_LN_2_DIV_LN_10_SCALE100) + 10 + 6 ) + +/* + * Define the base integer type, architecture-wise. + * + * 32-bit integers can be forced on 64-bit arches (eg. for testing purposes) + * by defining MBEDTLS_HAVE_INT32 and undefining MBEDTLS_HAVE_ASM + */ +#if ( ! defined(MBEDTLS_HAVE_INT32) && \ + defined(_MSC_VER) && defined(_M_AMD64) ) + #define MBEDTLS_HAVE_INT64 + typedef int64_t mbedtls_mpi_sint; + typedef uint64_t mbedtls_mpi_uint; +#else + #if ( ! defined(MBEDTLS_HAVE_INT32) && \ + defined(__GNUC__) && ( \ + defined(__amd64__) || defined(__x86_64__) || \ + defined(__ppc64__) || defined(__powerpc64__) || \ + defined(__ia64__) || defined(__alpha__) || \ + (defined(__sparc__) && defined(__arch64__)) || \ + defined(__s390x__) || defined(__mips64) ) ) + #define MBEDTLS_HAVE_INT64 + typedef int64_t mbedtls_mpi_sint; + typedef uint64_t mbedtls_mpi_uint; + /* mbedtls_t_udbl defined as 128-bit unsigned int */ + typedef unsigned int mbedtls_t_udbl __attribute__((mode(TI))); + #define MBEDTLS_HAVE_UDBL + #else + #define MBEDTLS_HAVE_INT32 + typedef int32_t mbedtls_mpi_sint; + typedef uint32_t mbedtls_mpi_uint; + typedef uint64_t mbedtls_t_udbl; + #define MBEDTLS_HAVE_UDBL + #endif /* !MBEDTLS_HAVE_INT32 && __GNUC__ && 64-bit platform */ +#endif /* !MBEDTLS_HAVE_INT32 && _MSC_VER && _M_AMD64 */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief MPI structure + */ +typedef struct +{ + int s; /*!< integer sign */ + size_t n; /*!< total # of limbs */ + mbedtls_mpi_uint *p; /*!< pointer to limbs */ +} +mbedtls_mpi; + +/** + * \brief Initialize one MPI (make internal references valid) + * This just makes it ready to be set or freed, + * but does not define a value for the MPI. + * + * \param X One MPI to initialize. + */ +void mbedtls_mpi_init( mbedtls_mpi *X ); + +/** + * \brief Unallocate one MPI + * + * \param X One MPI to unallocate. + */ +void mbedtls_mpi_free( mbedtls_mpi *X ); + +/** + * \brief Enlarge to the specified number of limbs + * + * \param X MPI to grow + * \param nblimbs The target number of limbs + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_grow( mbedtls_mpi *X, size_t nblimbs ); + +/** + * \brief Resize down, keeping at least the specified number of limbs + * + * \param X MPI to shrink + * \param nblimbs The minimum number of limbs to keep + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_shrink( mbedtls_mpi *X, size_t nblimbs ); + +/** + * \brief Copy the contents of Y into X + * + * \param X Destination MPI + * \param Y Source MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_copy( mbedtls_mpi *X, const mbedtls_mpi *Y ); + +/** + * \brief Swap the contents of X and Y + * + * \param X First MPI value + * \param Y Second MPI value + */ +void mbedtls_mpi_swap( mbedtls_mpi *X, mbedtls_mpi *Y ); + +/** + * \brief Safe conditional assignement X = Y if assign is 1 + * + * \param X MPI to conditionally assign to + * \param Y Value to be assigned + * \param assign 1: perform the assignment, 0: keep X's original value + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * + * \note This function is equivalent to + * if( assign ) mbedtls_mpi_copy( X, Y ); + * except that it avoids leaking any information about whether + * the assignment was done or not (the above code may leak + * information through branch prediction and/or memory access + * patterns analysis). + */ +int mbedtls_mpi_safe_cond_assign( mbedtls_mpi *X, const mbedtls_mpi *Y, unsigned char assign ); + +/** + * \brief Safe conditional swap X <-> Y if swap is 1 + * + * \param X First mbedtls_mpi value + * \param Y Second mbedtls_mpi value + * \param assign 1: perform the swap, 0: keep X and Y's original values + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * + * \note This function is equivalent to + * if( assign ) mbedtls_mpi_swap( X, Y ); + * except that it avoids leaking any information about whether + * the assignment was done or not (the above code may leak + * information through branch prediction and/or memory access + * patterns analysis). + */ +int mbedtls_mpi_safe_cond_swap( mbedtls_mpi *X, mbedtls_mpi *Y, unsigned char assign ); + +/** + * \brief Set value from integer + * + * \param X MPI to set + * \param z Value to use + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_lset( mbedtls_mpi *X, mbedtls_mpi_sint z ); + +/** + * \brief Get a specific bit from X + * + * \param X MPI to use + * \param pos Zero-based index of the bit in X + * + * \return Either a 0 or a 1 + */ +int mbedtls_mpi_get_bit( const mbedtls_mpi *X, size_t pos ); + +/** + * \brief Set a bit of X to a specific value of 0 or 1 + * + * \note Will grow X if necessary to set a bit to 1 in a not yet + * existing limb. Will not grow if bit should be set to 0 + * + * \param X MPI to use + * \param pos Zero-based index of the bit in X + * \param val The value to set the bit to (0 or 1) + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if val is not 0 or 1 + */ +int mbedtls_mpi_set_bit( mbedtls_mpi *X, size_t pos, unsigned char val ); + +/** + * \brief Return the number of zero-bits before the least significant + * '1' bit + * + * Note: Thus also the zero-based index of the least significant '1' bit + * + * \param X MPI to use + */ +size_t mbedtls_mpi_lsb( const mbedtls_mpi *X ); + +/** + * \brief Return the number of bits up to and including the most + * significant '1' bit' + * + * Note: Thus also the one-based index of the most significant '1' bit + * + * \param X MPI to use + */ +size_t mbedtls_mpi_bitlen( const mbedtls_mpi *X ); + +/** + * \brief Return the total size in bytes + * + * \param X MPI to use + */ +size_t mbedtls_mpi_size( const mbedtls_mpi *X ); + +/** + * \brief Import from an ASCII string + * + * \param X Destination MPI + * \param radix Input numeric base + * \param s Null-terminated string buffer + * + * \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code + */ +int mbedtls_mpi_read_string( mbedtls_mpi *X, int radix, const char *s ); + +/** + * \brief Export into an ASCII string + * + * \param X Source MPI + * \param radix Output numeric base + * \param buf Buffer to write the string to + * \param buflen Length of buf + * \param olen Length of the string written, including final NUL byte + * + * \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code. + * *olen is always updated to reflect the amount + * of data that has (or would have) been written. + * + * \note Call this function with buflen = 0 to obtain the + * minimum required buffer size in *olen. + */ +int mbedtls_mpi_write_string( const mbedtls_mpi *X, int radix, + char *buf, size_t buflen, size_t *olen ); + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Read X from an opened file + * + * \param X Destination MPI + * \param radix Input numeric base + * \param fin Input file handle + * + * \return 0 if successful, MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if + * the file read buffer is too small or a + * MBEDTLS_ERR_MPI_XXX error code + */ +int mbedtls_mpi_read_file( mbedtls_mpi *X, int radix, FILE *fin ); + +/** + * \brief Write X into an opened file, or stdout if fout is NULL + * + * \param p Prefix, can be NULL + * \param X Source MPI + * \param radix Output numeric base + * \param fout Output file handle (can be NULL) + * + * \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code + * + * \note Set fout == NULL to print X on the console. + */ +int mbedtls_mpi_write_file( const char *p, const mbedtls_mpi *X, int radix, FILE *fout ); +#endif /* MBEDTLS_FS_IO */ + +/** + * \brief Import X from unsigned binary data, big endian + * + * \param X Destination MPI + * \param buf Input buffer + * \param buflen Input buffer size + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_read_binary( mbedtls_mpi *X, const unsigned char *buf, size_t buflen ); + +/** + * \brief Export X into unsigned binary data, big endian. + * Always fills the whole buffer, which will start with zeros + * if the number is smaller. + * + * \param X Source MPI + * \param buf Output buffer + * \param buflen Output buffer size + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if buf isn't large enough + */ +int mbedtls_mpi_write_binary( const mbedtls_mpi *X, unsigned char *buf, size_t buflen ); + +/** + * \brief Left-shift: X <<= count + * + * \param X MPI to shift + * \param count Amount to shift + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_shift_l( mbedtls_mpi *X, size_t count ); + +/** + * \brief Right-shift: X >>= count + * + * \param X MPI to shift + * \param count Amount to shift + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_shift_r( mbedtls_mpi *X, size_t count ); + +/** + * \brief Compare unsigned values + * + * \param X Left-hand MPI + * \param Y Right-hand MPI + * + * \return 1 if |X| is greater than |Y|, + * -1 if |X| is lesser than |Y| or + * 0 if |X| is equal to |Y| + */ +int mbedtls_mpi_cmp_abs( const mbedtls_mpi *X, const mbedtls_mpi *Y ); + +/** + * \brief Compare signed values + * + * \param X Left-hand MPI + * \param Y Right-hand MPI + * + * \return 1 if X is greater than Y, + * -1 if X is lesser than Y or + * 0 if X is equal to Y + */ +int mbedtls_mpi_cmp_mpi( const mbedtls_mpi *X, const mbedtls_mpi *Y ); + +/** + * \brief Compare signed values + * + * \param X Left-hand MPI + * \param z The integer value to compare to + * + * \return 1 if X is greater than z, + * -1 if X is lesser than z or + * 0 if X is equal to z + */ +int mbedtls_mpi_cmp_int( const mbedtls_mpi *X, mbedtls_mpi_sint z ); + +/** + * \brief Unsigned addition: X = |A| + |B| + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_add_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Unsigned subtraction: X = |A| - |B| + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_NEGATIVE_VALUE if B is greater than A + */ +int mbedtls_mpi_sub_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Signed addition: X = A + B + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_add_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Signed subtraction: X = A - B + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_sub_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Signed addition: X = A + b + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param b The integer value to add + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_add_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b ); + +/** + * \brief Signed subtraction: X = A - b + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param b The integer value to subtract + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_sub_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b ); + +/** + * \brief Baseline multiplication: X = A * B + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_mul_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Baseline multiplication: X = A * b + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param b The unsigned integer value to multiply with + * + * \note b is unsigned + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_mul_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_uint b ); + +/** + * \brief Division by mbedtls_mpi: A = Q * B + R + * + * \param Q Destination MPI for the quotient + * \param R Destination MPI for the rest value + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if B == 0 + * + * \note Either Q or R can be NULL. + */ +int mbedtls_mpi_div_mpi( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Division by int: A = Q * b + R + * + * \param Q Destination MPI for the quotient + * \param R Destination MPI for the rest value + * \param A Left-hand MPI + * \param b Integer to divide by + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if b == 0 + * + * \note Either Q or R can be NULL. + */ +int mbedtls_mpi_div_int( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, mbedtls_mpi_sint b ); + +/** + * \brief Modulo: R = A mod B + * + * \param R Destination MPI for the rest value + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if B == 0, + * MBEDTLS_ERR_MPI_NEGATIVE_VALUE if B < 0 + */ +int mbedtls_mpi_mod_mpi( mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Modulo: r = A mod b + * + * \param r Destination mbedtls_mpi_uint + * \param A Left-hand MPI + * \param b Integer to divide by + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if b == 0, + * MBEDTLS_ERR_MPI_NEGATIVE_VALUE if b < 0 + */ +int mbedtls_mpi_mod_int( mbedtls_mpi_uint *r, const mbedtls_mpi *A, mbedtls_mpi_sint b ); + +/** + * \brief Sliding-window exponentiation: X = A^E mod N + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param E Exponent MPI + * \param N Modular MPI + * \param _RR Speed-up MPI used for recalculations + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if N is negative or even or + * if E is negative + * + * \note _RR is used to avoid re-computing R*R mod N across + * multiple calls, which speeds up things a bit. It can + * be set to NULL if the extra performance is unneeded. + */ +int mbedtls_mpi_exp_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *E, const mbedtls_mpi *N, mbedtls_mpi *_RR ); + +/** + * \brief Fill an MPI X with size bytes of random + * + * \param X Destination MPI + * \param size Size in bytes + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_fill_random( mbedtls_mpi *X, size_t size, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Greatest common divisor: G = gcd(A, B) + * + * \param G Destination MPI + * \param A Left-hand MPI + * \param B Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + */ +int mbedtls_mpi_gcd( mbedtls_mpi *G, const mbedtls_mpi *A, const mbedtls_mpi *B ); + +/** + * \brief Modular inverse: X = A^-1 mod N + * + * \param X Destination MPI + * \param A Left-hand MPI + * \param N Right-hand MPI + * + * \return 0 if successful, + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if N is negative or nil + MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if A has no inverse mod N + */ +int mbedtls_mpi_inv_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *N ); + +/** + * \brief Miller-Rabin primality test + * + * \param X MPI to check + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \return 0 if successful (probably prime), + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if X is not prime + */ +int mbedtls_mpi_is_prime( const mbedtls_mpi *X, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Prime number generation + * + * \param X Destination MPI + * \param nbits Required size of X in bits + * ( 3 <= nbits <= MBEDTLS_MPI_MAX_BITS ) + * \param dh_flag If 1, then (X-1)/2 will be prime too + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \return 0 if successful (probably prime), + * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if nbits is < 3 + */ +int mbedtls_mpi_gen_prime( mbedtls_mpi *X, size_t nbits, int dh_flag, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_mpi_self_test( int verbose ); + +#ifdef __cplusplus +} +#endif + +#endif /* bignum.h */