![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Basic message sending over an ad hoc ble network
Fork of mbed-os-example-ble-LEDBlinker by
Diff: readme.md
- Revision:
- 0:86bf1d2040b3
- Child:
- 2:3f5a4729c22b
diff -r 000000000000 -r 86bf1d2040b3 readme.md --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/readme.md Tue Jul 26 14:49:03 2016 +0100 @@ -0,0 +1,54 @@ +# BLE LED Blinker + +This example demonstrates using the ``GattClient`` API to control BLE client devices. + +The example uses two applications running on two different devices: + +1. The first device - the central - runs the application ``BLE_LEDBlinker`` from this repository. This application sends an on/off toggle over BLE. + +1. The second device - the peripheral - runs the application [``BLE_LED``](https://github.com/ARMmbed/mbed-os-example-ble/tree/master/BLE_LED) to respond to the toggle. + + The toggle simply turns the LED on the peripheral device on and off. + +# Running the application + +## Requirements + +Hardware requirements are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md). + +This example requires *two* devices. + +## Building instructions + +You will need to build both applications and flash each one to a different board. + +Please note: The application ``BLE_LEDBlinker`` in this repository initiate a connection to all ble devices which advertise "LED" as complete local name. By default, the application `BLE_LED` advertise "LED" as complete local name. If you change the local name advertised by the application `BLE_LED` you should reflect your change in this application by changing the value of the constant `PEER_NAME` in `main.cpp`. + +**Tip:** You may notice that the application also checks the LED characteristic's UUID; you don't need to change this parameter's value, because it already matches the UUID provided by the second application, ``BLE_LED``. + +Building instructions for all mbed OS samples are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md). + +## Checking for success + +1. Build both applications and install one on each device, as explained in the building instructions. + +1. The LED number two of the device running ``BLE_LED`` should blink. + + +## Monitoring the application through a serial port + +You can run ``BLE_LEDBlinker`` and see that it works properly by monitoring its serial output. + +You need a terminal program to listen to the output through a serial port. You can download one, for example: + +* Tera Term for Windows. +* CoolTerm for Mac OS X. +* GNU Screen for Linux. + +To see the application's output: + +1. Check which serial port your device is connected to. +1. Run a terminal program with the correct serial port and set the baud rate to 9600. For example, to use GNU Screen, run: ``screen /dev/tty.usbmodem1412 9600``. +1. The application should start printing the toggle's value to the terminal. + +**Note:** ``BLE_LEDBlinker`` will not run properly if the ``BLE_LED`` application is not running on a second device. The terminal will show a few print statements, but you will not be able to see the application in full operation.