Mark Underwood
Internal_Datalogger but with USB support removed (for MAX40108 Demo board), proof of concept that MAX32625 can be used successfully with VDDB(USB) left unpowered, as long as the USB library is not used.
Dependencies: max32625pico CmdLine
DataLogger_Internal.cpp
- Committer:
- whismanoid
- Date:
- 2020-11-02
- Revision:
- 0:cb44e2e9ec4c
- Child:
- 1:747f1602abfc
File content as of revision 0:cb44e2e9ec4c:
// /*******************************************************************************
// * Copyright (C) 2020 Maxim Integrated Products, Inc., All Rights Reserved.
// *
// * Permission is hereby granted, free of charge, to any person obtaining a
// * copy of this software and associated documentation files (the "Software"),
// * to deal in the Software without restriction, including without limitation
// * the rights to use, copy, modify, merge, publish, distribute, sublicense,
// * and/or sell copies of the Software, and to permit persons to whom the
// * Software is furnished to do so, subject to the following conditions:
// *
// * The above copyright notice and this permission notice shall be included
// * in all copies or substantial portions of the Software.
// *
// * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
// * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
// * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
// * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
// * OTHER DEALINGS IN THE SOFTWARE.
// *
// * Except as contained in this notice, the name of Maxim Integrated
// * Products, Inc. shall not be used except as stated in the Maxim Integrated
// * Products, Inc. Branding Policy.
// *
// * The mere transfer of this software does not imply any licenses
// * of trade secrets, proprietary technology, copyrights, patents,
// * trademarks, maskwork rights, or any other form of intellectual
// * property whatsoever. Maxim Integrated Products, Inc. retains all
// * ownership rights.
// *******************************************************************************
// */
// *******************************************************************************
// COM port settings are 9600 baud 8N1
// *******************************************************************************
//---------- CODE GENERATOR: DataLogHelloCppCodeList
// CODE GENERATOR: example code includes
// example code includes
// standard include for target platform -- Platform_Include_Boilerplate
#include "mbed.h"
// Platforms:
// - MAX32625MBED
// - supports mbed-os-5.11, requires USBDevice library
// - add https://developer.mbed.org/teams/MaximIntegrated/code/USBDevice/
// - remove max32630fthr library (if present)
// - remove MAX32620FTHR library (if present)
// - MAX32600MBED
// - remove max32630fthr library (if present)
// - remove MAX32620FTHR library (if present)
// - Windows 10 note: Don't connect HDK until you are ready to load new firmware into the board.
// - NUCLEO_F446RE
// - remove USBDevice library
// - remove max32630fthr library (if present)
// - remove MAX32620FTHR library (if present)
// - NUCLEO_F401RE
// - remove USBDevice library
// - remove max32630fthr library (if present)
// - remove MAX32620FTHR library (if present)
// - MAX32630FTHR
// - #include "max32630fthr.h"
// - add http://os.mbed.org/teams/MaximIntegrated/code/max32630fthr/
// - remove MAX32620FTHR library (if present)
// - MAX32620FTHR
// - #include "MAX32620FTHR.h"
// - remove max32630fthr library (if present)
// - add https://os.mbed.com/teams/MaximIntegrated/code/MAX32620FTHR/
// - not tested yet
// - MAX32625PICO
// - #include "max32625pico.h"
// - add https://os.mbed.com/users/switches/code/max32625pico/
// - remove max32630fthr library (if present)
// - remove MAX32620FTHR library (if present)
// - not tested yet
// - see https://os.mbed.com/users/switches/code/max32625pico/
// - see https://os.mbed.com/users/switches/code/PICO_board_demo/
// - see https://os.mbed.com/users/switches/code/PICO_USB_I2C_SPI/
// - see https://os.mbed.com/users/switches/code/SerialInterface/
// - Note: To load the MAX32625PICO firmware, hold the button while
// connecting the USB cable, then copy firmware bin file
// to the MAINTENANCE drive.
// - see https://os.mbed.com/platforms/MAX32625PICO/
// - see https://os.mbed.com/teams/MaximIntegrated/wiki/MAX32625PICO-Firmware-Updates
//
// end Platform_Include_Boilerplate
//~ #include "MAX11410.h"
// optional: serial port
// note: some platforms such as Nucleo-F446RE do not support the USBSerial library.
// In those cases, remove the USBDevice lib from the project and rebuild.
#if defined(TARGET_MAX32625MBED)
#include "USBSerial.h"
USBSerial serial; // virtual serial port over USB (DEV connector)
#elif defined(TARGET_MAX32625PICO)
#include "USBSerial.h"
USBSerial serial; // virtual serial port over USB (DEV connector)
#elif defined(TARGET_MAX32600MBED)
#include "USBSerial.h"
USBSerial serial; // virtual serial port over USB (DEV connector)
#elif defined(TARGET_MAX32630MBED)
#include "USBSerial.h"
USBSerial serial; // virtual serial port over USB (DEV connector)
#else
//#include "USBSerial.h"
Serial serial(USBTX, USBRX); // tx, rx
#endif
void on_immediate_0x21(); // Unicode (U+0021) ! EXCLAMATION MARK
void on_immediate_0x7b(); // Unicode (U+007B) { LEFT CURLY BRACKET
void on_immediate_0x7d(); // Unicode (U+007D) } RIGHT CURLY BRACKET
#include "CmdLine.h"
# if HAS_DAPLINK_SERIAL
CmdLine cmdLine_DAPLINKserial(DAPLINKserial, "DAPLINK");
# endif // HAS_DAPLINK_SERIAL
CmdLine cmdLine(serial, "serial");
//--------------------------------------------------
#if defined(TARGET)
// TARGET_NAME macros from targets/TARGET_Maxim/TARGET_MAX32625/device/mxc_device.h
// Create a string definition for the TARGET
#define STRING_ARG(arg) #arg
#define STRING_NAME(name) STRING_ARG(name)
#define TARGET_NAME STRING_NAME(TARGET)
#elif defined(TARGET_MAX32600)
#define TARGET_NAME "MAX32600"
#elif defined(TARGET_LPC1768)
#define TARGET_NAME "LPC1768"
#elif defined(TARGET_NUCLEO_F446RE)
#define TARGET_NAME "NUCLEO_F446RE"
#elif defined(TARGET_NUCLEO_F401RE)
#define TARGET_NAME "NUCLEO_F401RE"
#else
#error TARGET NOT DEFINED
#endif
#if defined(TARGET_MAX32630)
//--------------------------------------------------
// TARGET=MAX32630FTHR ARM Cortex-M4F 96MHz 2048kB Flash 512kB SRAM
// +-------------[microUSB]-------------+
// | J1 MAX32630FTHR J2 |
// ______ | [ ] RST GND [ ] |
// ______ | [ ] 3V3 BAT+[ ] |
// ______ | [ ] 1V8 reset SW1 |
// ______ | [ ] GND J4 J3 |
// analogIn0/4 | [a] AIN_0 1.2Vfs (bat) SYS [ ] | switched BAT+
// analogIn1/5 | [a] AIN_1 1.2Vfs PWR [ ] | external pwr btn
// analogIn2 | [a] AIN_2 1.2Vfs +5V VBUS [ ] | USB +5V power
// analogIn3 | [a] AIN_3 1.2Vfs 1-WIRE P4_0 [d] | D0 dig9
// (I2C2.SDA) | [d] P5_7 SDA2 SRN P5_6 [d] | D1 dig8
// (I2C2.SCL) | [d] P6_0 SCL2 SDIO3 P5_5 [d] | D2 dig7
// D13/SCLK | [s] P5_0 SCLK SDIO2 P5_4 [d] | D3 dig6
// D11/MOSI | [s] P5_1 MOSI SSEL P5_3 [d] | D4 dig5
// D12/MISO | [s] P5_2 MISO RTS P3_3 [d] | D5 dig4
// D10/CS | [s] P3_0 RX CTS P3_2 [d] | D6 dig3
// D9 dig0 | [d] P3_1 TX SCL P3_5 [d] | D7 dig2
// ______ | [ ] GND SDA P3_4 [d] | D8 dig1
// | |
// | XIP Flash MAX14690N |
// | XIP_SCLK P1_0 SDA2 P5_7 |
// | XIP_MOSI P1_1 SCL2 P6_0 |
// | XIP_MISO P1_2 PMIC_INIT P3_7 |
// | XIP_SSEL P1_3 MPC P2_7 |
// | XIP_DIO2 P1_4 MON AIN_0 |
// | XIP_DIO3 P1_5 |
// | |
// | PAN1326B MicroSD LED |
// | BT_RX P0_0 SD_SCLK P0_4 r P2_4 |
// | BT_TX P0_1 SD_MOSI P0_5 g P2_5 |
// | BT_CTS P0_2 SD_MISO P0_6 b P2_6 |
// | BT_RTS P0_3 SD_SSEL P0_7 |
// | BT_RST P1_6 DETECT P2_2 |
// | BT_CLK P1_7 SW2 P2_3 |
// +------------------------------------+
// MAX32630FTHR board has MAX14690 PMIC on I2C bus (P5_7 SDA, P6_0 SCL) at slave address 0101_000r 0x50 (or 0x28 for 7 MSbit address).
// MAX32630FTHR board has BMI160 accelerometer on I2C bus (P5_7 SDA, P6_0 SCL) at slave address 1101_000r 0xD0 (or 0x68 for 7 MSbit address).
// AIN_0 = AIN0 pin fullscale is 1.2V
// AIN_1 = AIN1 pin fullscale is 1.2V
// AIN_2 = AIN2 pin fullscale is 1.2V
// AIN_3 = AIN3 pin fullscale is 1.2V
// AIN_4 = AIN0 / 5.0 fullscale is 6.0V
// AIN_5 = AIN1 / 5.0 fullscale is 6.0V
// AIN_6 = VDDB / 4.0 fullscale is 4.8V
// AIN_7 = VDD18 fullscale is 1.2V
// AIN_8 = VDD12 fullscale is 1.2V
// AIN_9 = VRTC / 2.0 fullscale is 2.4V
// AIN_10 = x undefined?
// AIN_11 = VDDIO / 4.0 fullscale is 4.8V
// AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
//
#include "max32630fthr.h"
MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
// MAX32630FTHR board supports only internal VREF = 1.200V at bypass capacitor C15
const float ADC_FULL_SCALE_VOLTAGE = 1.200;
// Arduino connector
#ifndef A0
#define A0 AIN_0
#endif
#ifndef A1
#define A1 AIN_1
#endif
#ifndef A2
#define A2 AIN_2
#endif
#ifndef A3
#define A3 AIN_3
#endif
#ifndef D0
#define D0 P4_0
#endif
#ifndef D1
#define D1 P5_6
#endif
#ifndef D2
#define D2 P5_5
#endif
#ifndef D3
#define D3 P5_4
#endif
#ifndef D4
#define D4 P5_3
#endif
#ifndef D5
#define D5 P3_3
#endif
#ifndef D6
#define D6 P3_2
#endif
#ifndef D7
#define D7 P3_5
#endif
#ifndef D8
#define D8 P3_4
#endif
#ifndef D9
#define D9 P3_1
#endif
#ifndef D10
#define D10 P3_0
#endif
#ifndef D11
#define D11 P5_1
#endif
#ifndef D12
#define D12 P5_2
#endif
#ifndef D13
#define D13 P5_0
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32625MBED)
//--------------------------------------------------
// TARGET=MAX32625MBED ARM Cortex-M4F 96MHz 512kB Flash 160kB SRAM
// +-------------------------------------+
// | MAX32625MBED Arduino UNO header |
// | |
// | A5/SCL[ ] | P1_7 dig15
// | A4/SDA[ ] | P1_6 dig14
// | AREF=N/C[ ] |
// | GND[ ] |
// | [ ]N/C SCK/13[ ] | P1_0 dig13
// | [ ]IOREF=3V3 MISO/12[ ] | P1_2 dig12
// | [ ]RST MOSI/11[ ]~| P1_1 dig11
// | [ ]3V3 CS/10[ ]~| P1_3 dig10
// | [ ]5V0 9[ ]~| P1_5 dig9
// | [ ]GND 8[ ] | P1_4 dig8
// | [ ]GND |
// | [ ]Vin 7[ ] | P0_7 dig7
// | 6[ ]~| P0_6 dig6
// AIN_0 | [ ]A0 5[ ]~| P0_5 dig5
// AIN_1 | [ ]A1 4[ ] | P0_4 dig4
// AIN_2 | [ ]A2 INT1/3[ ]~| P0_3 dig3
// AIN_3 | [ ]A3 INT0/2[ ] | P0_2 dig2
// dig16 P3_4 | [ ]A4/SDA RST SCK MISO TX>1[ ] | P0_1 dig1
// dig17 P3_5 | [ ]A5/SCL [ ] [ ] [ ] RX<0[ ] | P0_0 dig0
// | [ ] [ ] [ ] |
// | UNO_R3 GND MOSI 5V ____________/
// \_______________________/
//
// +------------------------+
// | |
// | MicroSD LED |
// | SD_SCLK P2_4 r P3_0 |
// | SD_MOSI P2_5 g P3_1 |
// | SD_MISO P2_6 b P3_2 |
// | SD_SSEL P2_7 y P3_3 |
// | |
// | DAPLINK BUTTONS |
// | TX P2_1 SW3 P2_3 |
// | RX P2_0 SW2 P2_2 |
// +------------------------+
//
// AIN_0 = AIN0 pin fullscale is 1.2V
// AIN_1 = AIN1 pin fullscale is 1.2V
// AIN_2 = AIN2 pin fullscale is 1.2V
// AIN_3 = AIN3 pin fullscale is 1.2V
// AIN_4 = AIN0 / 5.0 fullscale is 6.0V
// AIN_5 = AIN1 / 5.0 fullscale is 6.0V
// AIN_6 = VDDB / 4.0 fullscale is 4.8V
// AIN_7 = VDD18 fullscale is 1.2V
// AIN_8 = VDD12 fullscale is 1.2V
// AIN_9 = VRTC / 2.0 fullscale is 2.4V
// AIN_10 = x undefined?
// AIN_11 = VDDIO / 4.0 fullscale is 4.8V
// AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
//
//#include "max32625mbed.h" // ?
//MAX32625MBED mbed(MAX32625MBED::VIO_3V3); // ?
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
// MAX32630FTHR board supports only internal VREF = 1.200V at bypass capacitor C15
const float ADC_FULL_SCALE_VOLTAGE = 1.200; // TODO: ADC_FULL_SCALE_VOLTAGE Pico?
// Arduino connector
#ifndef A0
#define A0 AIN_0
#endif
#ifndef A1
#define A1 AIN_1
#endif
#ifndef A2
#define A2 AIN_2
#endif
#ifndef A3
#define A3 AIN_3
#endif
#ifndef D0
#define D0 P0_0
#endif
#ifndef D1
#define D1 P0_1
#endif
#ifndef D2
#define D2 P0_2
#endif
#ifndef D3
#define D3 P0_3
#endif
#ifndef D4
#define D4 P0_4
#endif
#ifndef D5
#define D5 P0_5
#endif
#ifndef D6
#define D6 P0_6
#endif
#ifndef D7
#define D7 P0_7
#endif
#ifndef D8
#define D8 P1_4
#endif
#ifndef D9
#define D9 P1_5
#endif
#ifndef D10
#define D10 P1_3
#endif
#ifndef D11
#define D11 P1_1
#endif
#ifndef D12
#define D12 P1_2
#endif
#ifndef D13
#define D13 P1_0
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32600)
// target MAX32600
//
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 0
const float ADC_FULL_SCALE_VOLTAGE = 1.500;
//
//--------------------------------------------------
#elif defined(TARGET_MAX32620FTHR)
#warning "TARGET_MAX32620FTHR not previously tested; need to define pins..."
#include "MAX32620FTHR.h"
// Initialize I/O voltages on MAX32620FTHR board
MAX32620FTHR fthr(MAX32620FTHR::VIO_3V3);
//#define USE_LEDS 0 ?
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
#warning "TARGET_MAX32620FTHR not previously tested; need to verify ADC_FULL_SCALE_VOLTAGE..."
const float ADC_FULL_SCALE_VOLTAGE = 1.200;
//
//--------------------------------------------------
#elif defined(TARGET_MAX32625PICO)
#warning "TARGET_MAX32625PICO not previously tested; need to define pins..."
#include "max32625pico.h"
// configure MAX32625PICO VDDIOH mode, and I/O voltages for DIP pins and SWD pins
MAX32625PICO pico(
// vddioh_mode_t iohMode
//~ MAX32625PICO::IOH_OFF, // No connections to VDDIOH
//~ MAX32625PICO::IOH_DIP_IN, // VDDIOH input from DIP pin 1 (AIN0)
//~ MAX32625PICO::IOH_SWD_IN, // VDDIOH input from SWD pin 1
MAX32625PICO::IOH_3V3, // VDDIOH = 3.3V from local supply
//~ MAX32625PICO::IOH_DIP_OUT, // VDDIOH = 3.3V output to DIP pin 1
//~ MAX32625PICO::IOH_SWD_OUT, // VDDIOH = 3.3V output to SWD pin 1
//
// vio_t dipVio = MAX32625PICO::VIO_1V8 or MAX32625PICO::VIO_IOH
//~ MAX32625PICO::VIO_1V8, // 1.8V IO (local)
MAX32625PICO::VIO_IOH, // Use VDDIOH (from DIP pin 1, or SWD pin1, or local 3.3V)
//
// vio_t swdVio
//~ MAX32625PICO::VIO_1V8 // 1.8V IO (local)
MAX32625PICO::VIO_IOH // Use VDDIOH (from DIP pin 1, or SWD pin1, or local 3.3V)
);
//#define USE_LEDS 0 ?
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
#warning "TARGET_MAX32625PICO not previously tested; need to verify ADC_FULL_SCALE_VOLTAGE..."
const float ADC_FULL_SCALE_VOLTAGE = 1.200;
//
//--------------------------------------------------
#elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
// TODO1: target NUCLEO_F446RE
//
// USER_BUTTON PC13
// LED1 is shared with SPI_SCK on NUCLEO_F446RE PA_5, so don't use LED1.
#define USE_LEDS 0
// SPI spi(SPI_MOSI, SPI_MISO, SPI_SCK);
// Serial serial(SERIAL_TX, SERIAL_RX);
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 0
const float ADC_FULL_SCALE_VOLTAGE = 3.300; // TODO: ADC_FULL_SCALE_VOLTAGE Pico?
//
//--------------------------------------------------
#elif defined(TARGET_LPC1768)
//--------------------------------------------------
// TARGET=LPC1768 ARM Cortex-M3 100 MHz 512kB flash 64kB SRAM
// +-------------[microUSB]-------------+
// ______ | [ ] GND +3.3V VOUT [ ] | ______
// ______ | [ ] 4.5V<VIN<9.0V +5.0V VU [ ] | ______
// ______ | [ ] VB USB.IF- [ ] | ______
// ______ | [ ] nR USB.IF+ [ ] | ______
// digitalInOut0 | [ ] p5 MOSI ETHERNET.RD- [ ] | ______
// digitalInOut1 | [ ] p6 MISO ETHERNET.RD+ [ ] | ______
// digitalInOut2 | [ ] p7 SCLK ETHERNET.TD- [ ] | ______
// digitalInOut3 | [ ] p8 ETHERNET.TD+ [ ] | ______
// digitalInOut4 | [ ] p9 TX SDA USB.D- [ ] | ______
// digitalInOut5 | [ ] p10 RX SCL USB.D+ [ ] | ______
// digitalInOut6 | [ ] p11 MOSI CAN-RD p30 [ ] | digitalInOut13
// digitalInOut7 | [ ] p12 MISO CAN-TD p29 [ ] | digitalInOut12
// digitalInOut8 | [ ] p13 TX SCLK SDA TX p28 [ ] | digitalInOut11
// digitalInOut9 | [ ] p14 RX SCL RX p27 [ ] | digitalInOut10
// analogIn0 | [ ] p15 AIN0 3.3Vfs PWM1 p26 [ ] | pwmDriver1
// analogIn1 | [ ] p16 AIN1 3.3Vfs PWM2 p25 [ ] | pwmDriver2
// analogIn2 | [ ] p17 AIN2 3.3Vfs PWM3 p24 [ ] | pwmDriver3
// analogIn3 | [ ] p18 AIN3 AOUT PWM4 p23 [ ] | pwmDriver4
// analogIn4 | [ ] p19 AIN4 3.3Vfs PWM5 p22 [ ] | pwmDriver5
// analogIn5 | [ ] p20 AIN5 3.3Vfs PWM6 p21 [ ] | pwmDriver6
// +------------------------------------+
// AIN6 = P0.3 = TGT_SBL_RXD?
// AIN7 = P0.2 = TGT_SBL_TXD?
//
//--------------------------------------------------
// LPC1768 board uses VREF = 3.300V +A3,3V thru L1 to bypass capacitor C14
#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 0
const float ADC_FULL_SCALE_VOLTAGE = 3.300;
#else // not defined(TARGET_LPC1768 etc.)
//--------------------------------------------------
// unknown target
//--------------------------------------------------
#endif // target definition
// uncrustify-0.66.1 *INDENT-OFF*
//--------------------------------------------------
// Declare the DigitalInOut GPIO pins
// Optional digitalInOut support. If there is only one it should be digitalInOut1.
// D) Digital High/Low/Input Pin
#if defined(TARGET_MAX32630)
// +-------------[microUSB]-------------+
// | J1 MAX32630FTHR J2 |
// | [ ] RST GND [ ] |
// | [ ] 3V3 BAT+[ ] |
// | [ ] 1V8 reset SW1 |
// | [ ] GND J4 J3 |
// | [ ] AIN_0 1.2Vfs (bat) SYS [ ] |
// | [ ] AIN_1 1.2Vfs PWR [ ] |
// | [ ] AIN_2 1.2Vfs +5V VBUS [ ] |
// | [ ] AIN_3 1.2Vfs 1-WIRE P4_0 [ ] | dig9
// dig10 | [x] P5_7 SDA2 SRN P5_6 [ ] | dig8
// dig11 | [x] P6_0 SCL2 SDIO3 P5_5 [ ] | dig7
// dig12 | [x] P5_0 SCLK SDIO2 P5_4 [ ] | dig6
// dig13 | [x] P5_1 MOSI SSEL P5_3 [x] | dig5
// dig14 | [ ] P5_2 MISO RTS P3_3 [ ] | dig4
// dig15 | [ ] P3_0 RX CTS P3_2 [ ] | dig3
// dig0 | [ ] P3_1 TX SCL P3_5 [x] | dig2
// | [ ] GND SDA P3_4 [x] | dig1
// +------------------------------------+
#define HAS_digitalInOut0 1 // P3_1 TARGET_MAX32630 J1.15
#define HAS_digitalInOut1 1 // P3_4 TARGET_MAX32630 J3.12
#define HAS_digitalInOut2 1 // P3_5 TARGET_MAX32630 J3.11
#define HAS_digitalInOut3 1 // P3_2 TARGET_MAX32630 J3.10
#define HAS_digitalInOut4 1 // P3_3 TARGET_MAX32630 J3.9
#define HAS_digitalInOut5 1 // P5_3 TARGET_MAX32630 J3.8
#define HAS_digitalInOut6 1 // P5_4 TARGET_MAX32630 J3.7
#define HAS_digitalInOut7 1 // P5_5 TARGET_MAX32630 J3.6
#define HAS_digitalInOut8 1 // P5_6 TARGET_MAX32630 J3.5
#define HAS_digitalInOut9 1 // P4_0 TARGET_MAX32630 J3.4
#if HAS_I2C
// avoid resource conflict between P5_7, P6_0 I2C and DigitalInOut
#define HAS_digitalInOut10 0 // P5_7 TARGET_MAX32630 J1.9
#define HAS_digitalInOut11 0 // P6_0 TARGET_MAX32630 J1.10
#else // HAS_I2C
#define HAS_digitalInOut10 1 // P5_7 TARGET_MAX32630 J1.9
#define HAS_digitalInOut11 1 // P6_0 TARGET_MAX32630 J1.10
#endif // HAS_I2C
#if HAS_SPI
// avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
#define HAS_digitalInOut12 0 // P5_0 TARGET_MAX32630 J1.11
#define HAS_digitalInOut13 0 // P5_1 TARGET_MAX32630 J1.12
#define HAS_digitalInOut14 0 // P5_2 TARGET_MAX32630 J1.13
#define HAS_digitalInOut15 0 // P3_0 TARGET_MAX32630 J1.14
#else // HAS_SPI
#define HAS_digitalInOut12 1 // P5_0 TARGET_MAX32630 J1.11
#define HAS_digitalInOut13 1 // P5_1 TARGET_MAX32630 J1.12
#define HAS_digitalInOut14 1 // P5_2 TARGET_MAX32630 J1.13
#define HAS_digitalInOut15 1 // P3_0 TARGET_MAX32630 J1.14
#endif // HAS_SPI
#if HAS_digitalInOut0
DigitalInOut digitalInOut0(P3_1, PIN_INPUT, PullUp, 1); // P3_1 TARGET_MAX32630 J1.15
#endif
#if HAS_digitalInOut1
DigitalInOut digitalInOut1(P3_4, PIN_INPUT, PullUp, 1); // P3_4 TARGET_MAX32630 J3.12
#endif
#if HAS_digitalInOut2
DigitalInOut digitalInOut2(P3_5, PIN_INPUT, PullUp, 1); // P3_5 TARGET_MAX32630 J3.11
#endif
#if HAS_digitalInOut3
DigitalInOut digitalInOut3(P3_2, PIN_INPUT, PullUp, 1); // P3_2 TARGET_MAX32630 J3.10
#endif
#if HAS_digitalInOut4
DigitalInOut digitalInOut4(P3_3, PIN_INPUT, PullUp, 1); // P3_3 TARGET_MAX32630 J3.9
#endif
#if HAS_digitalInOut5
DigitalInOut digitalInOut5(P5_3, PIN_INPUT, PullUp, 1); // P5_3 TARGET_MAX32630 J3.8
#endif
#if HAS_digitalInOut6
DigitalInOut digitalInOut6(P5_4, PIN_INPUT, PullUp, 1); // P5_4 TARGET_MAX32630 J3.7
#endif
#if HAS_digitalInOut7
DigitalInOut digitalInOut7(P5_5, PIN_INPUT, PullUp, 1); // P5_5 TARGET_MAX32630 J3.6
#endif
#if HAS_digitalInOut8
DigitalInOut digitalInOut8(P5_6, PIN_INPUT, PullUp, 1); // P5_6 TARGET_MAX32630 J3.5
#endif
#if HAS_digitalInOut9
DigitalInOut digitalInOut9(P4_0, PIN_INPUT, PullUp, 1); // P4_0 TARGET_MAX32630 J3.4
#endif
#if HAS_digitalInOut10
DigitalInOut digitalInOut10(P5_7, PIN_INPUT, PullUp, 1); // P5_7 TARGET_MAX32630 J1.9
#endif
#if HAS_digitalInOut11
DigitalInOut digitalInOut11(P6_0, PIN_INPUT, PullUp, 1); // P6_0 TARGET_MAX32630 J1.10
#endif
#if HAS_digitalInOut12
DigitalInOut digitalInOut12(P5_0, PIN_INPUT, PullUp, 1); // P5_0 TARGET_MAX32630 J1.11
#endif
#if HAS_digitalInOut13
DigitalInOut digitalInOut13(P5_1, PIN_INPUT, PullUp, 1); // P5_1 TARGET_MAX32630 J1.12
#endif
#if HAS_digitalInOut14
DigitalInOut digitalInOut14(P5_2, PIN_INPUT, PullUp, 1); // P5_2 TARGET_MAX32630 J1.13
#endif
#if HAS_digitalInOut15
DigitalInOut digitalInOut15(P3_0, PIN_INPUT, PullUp, 1); // P3_0 TARGET_MAX32630 J1.14
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32625MBED)
// TARGET=MAX32625MBED ARM Cortex-M4F 96MHz 512kB Flash 160kB SRAM
// +-------------------------------------+
// | MAX32625MBED Arduino UNO header |
// | |
// | A5/SCL[ ] | P1_7 dig15
// | A4/SDA[ ] | P1_6 dig14
// | AREF=N/C[ ] |
// | GND[ ] |
// | [ ]N/C SCK/13[ ] | P1_0 dig13
// | [ ]IOREF=3V3 MISO/12[ ] | P1_2 dig12
// | [ ]RST MOSI/11[ ]~| P1_1 dig11
// | [ ]3V3 CS/10[ ]~| P1_3 dig10
// | [ ]5V0 9[ ]~| P1_5 dig9
// | [ ]GND 8[ ] | P1_4 dig8
// | [ ]GND |
// | [ ]Vin 7[ ] | P0_7 dig7
// | 6[ ]~| P0_6 dig6
// AIN_0 | [ ]A0 5[ ]~| P0_5 dig5
// AIN_1 | [ ]A1 4[ ] | P0_4 dig4
// AIN_2 | [ ]A2 INT1/3[ ]~| P0_3 dig3
// AIN_3 | [ ]A3 INT0/2[ ] | P0_2 dig2
// dig16 P3_4 | [ ]A4/SDA RST SCK MISO TX>1[ ] | P0_1 dig1
// dig17 P3_5 | [ ]A5/SCL [ ] [ ] [ ] RX<0[ ] | P0_0 dig0
// | [ ] [ ] [ ] |
// | UNO_R3 GND MOSI 5V ____________/
// \_______________________/
//
#define HAS_digitalInOut0 1 // P0_0 TARGET_MAX32625MBED D0
#define HAS_digitalInOut1 1 // P0_1 TARGET_MAX32625MBED D1
#if APPLICATION_MAX11131
#define HAS_digitalInOut2 0 // P0_2 TARGET_MAX32625MBED D2 -- MAX11131 EOC DigitalIn
#else
#define HAS_digitalInOut2 1 // P0_2 TARGET_MAX32625MBED D2
#endif
#define HAS_digitalInOut3 1 // P0_3 TARGET_MAX32625MBED D3
#define HAS_digitalInOut4 1 // P0_4 TARGET_MAX32625MBED D4
#define HAS_digitalInOut5 1 // P0_5 TARGET_MAX32625MBED D5
#define HAS_digitalInOut6 1 // P0_6 TARGET_MAX32625MBED D6
#define HAS_digitalInOut7 1 // P0_7 TARGET_MAX32625MBED D7
#define HAS_digitalInOut8 1 // P1_4 TARGET_MAX32625MBED D8
#if APPLICATION_MAX11131
#define HAS_digitalInOut9 0 // P1_5 TARGET_MAX32625MBED D9 -- MAX11131 CNVST DigitalOut
#else
#define HAS_digitalInOut9 1 // P1_5 TARGET_MAX32625MBED D9
#endif
#if HAS_SPI
// avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
#define HAS_digitalInOut10 0 // P1_3 TARGET_MAX32635MBED CS/10
#define HAS_digitalInOut11 0 // P1_1 TARGET_MAX32635MBED MOSI/11
#define HAS_digitalInOut12 0 // P1_2 TARGET_MAX32635MBED MISO/12
#define HAS_digitalInOut13 0 // P1_0 TARGET_MAX32635MBED SCK/13
#else // HAS_SPI
#define HAS_digitalInOut10 1 // P1_3 TARGET_MAX32635MBED CS/10
#define HAS_digitalInOut11 1 // P1_1 TARGET_MAX32635MBED MOSI/11
#define HAS_digitalInOut12 1 // P1_2 TARGET_MAX32635MBED MISO/12
#define HAS_digitalInOut13 1 // P1_0 TARGET_MAX32635MBED SCK/13
#endif // HAS_SPI
#if HAS_I2C
// avoid resource conflict between P5_7, P6_0 I2C and DigitalInOut
#define HAS_digitalInOut14 0 // P1_6 TARGET_MAX32635MBED A4/SDA (10pin digital connector)
#define HAS_digitalInOut15 0 // P1_7 TARGET_MAX32635MBED A5/SCL (10pin digital connector)
#define HAS_digitalInOut16 0 // P3_4 TARGET_MAX32635MBED A4/SDA (6pin analog connector)
#define HAS_digitalInOut17 0 // P3_5 TARGET_MAX32635MBED A5/SCL (6pin analog connector)
#else // HAS_I2C
#define HAS_digitalInOut14 1 // P1_6 TARGET_MAX32635MBED A4/SDA (10pin digital connector)
#define HAS_digitalInOut15 1 // P1_7 TARGET_MAX32635MBED A5/SCL (10pin digital connector)
#define HAS_digitalInOut16 1 // P3_4 TARGET_MAX32635MBED A4/SDA (6pin analog connector)
#define HAS_digitalInOut17 1 // P3_5 TARGET_MAX32635MBED A5/SCL (6pin analog connector)
#endif // HAS_I2C
#if HAS_digitalInOut0
DigitalInOut digitalInOut0(P0_0, PIN_INPUT, PullUp, 1); // P0_0 TARGET_MAX32625MBED D0
#endif
#if HAS_digitalInOut1
DigitalInOut digitalInOut1(P0_1, PIN_INPUT, PullUp, 1); // P0_1 TARGET_MAX32625MBED D1
#endif
#if HAS_digitalInOut2
DigitalInOut digitalInOut2(P0_2, PIN_INPUT, PullUp, 1); // P0_2 TARGET_MAX32625MBED D2
#endif
#if HAS_digitalInOut3
DigitalInOut digitalInOut3(P0_3, PIN_INPUT, PullUp, 1); // P0_3 TARGET_MAX32625MBED D3
#endif
#if HAS_digitalInOut4
DigitalInOut digitalInOut4(P0_4, PIN_INPUT, PullUp, 1); // P0_4 TARGET_MAX32625MBED D4
#endif
#if HAS_digitalInOut5
DigitalInOut digitalInOut5(P0_5, PIN_INPUT, PullUp, 1); // P0_5 TARGET_MAX32625MBED D5
#endif
#if HAS_digitalInOut6
DigitalInOut digitalInOut6(P0_6, PIN_INPUT, PullUp, 1); // P0_6 TARGET_MAX32625MBED D6
#endif
#if HAS_digitalInOut7
DigitalInOut digitalInOut7(P0_7, PIN_INPUT, PullUp, 1); // P0_7 TARGET_MAX32625MBED D7
#endif
#if HAS_digitalInOut8
DigitalInOut digitalInOut8(P1_4, PIN_INPUT, PullUp, 1); // P1_4 TARGET_MAX32625MBED D8
#endif
#if HAS_digitalInOut9
DigitalInOut digitalInOut9(P1_5, PIN_INPUT, PullUp, 1); // P1_5 TARGET_MAX32625MBED D9
#endif
#if HAS_digitalInOut10
DigitalInOut digitalInOut10(P1_3, PIN_INPUT, PullUp, 1); // P1_3 TARGET_MAX32635MBED CS/10
#endif
#if HAS_digitalInOut11
DigitalInOut digitalInOut11(P1_1, PIN_INPUT, PullUp, 1); // P1_1 TARGET_MAX32635MBED MOSI/11
#endif
#if HAS_digitalInOut12
DigitalInOut digitalInOut12(P1_2, PIN_INPUT, PullUp, 1); // P1_2 TARGET_MAX32635MBED MISO/12
#endif
#if HAS_digitalInOut13
DigitalInOut digitalInOut13(P1_0, PIN_INPUT, PullUp, 1); // P1_0 TARGET_MAX32635MBED SCK/13
#endif
#if HAS_digitalInOut14
// Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
// DigitalInOut mode can be one of PullUp, PullDown, PullNone, OpenDrain
DigitalInOut digitalInOut14(P1_6, PIN_INPUT, OpenDrain, 1); // P1_6 TARGET_MAX32635MBED A4/SDA (10pin digital connector)
#endif
#if HAS_digitalInOut15
// Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
DigitalInOut digitalInOut15(P1_7, PIN_INPUT, OpenDrain, 1); // P1_7 TARGET_MAX32635MBED A5/SCL (10pin digital connector)
#endif
#if HAS_digitalInOut16
// Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
// DigitalInOut mode can be one of PullUp, PullDown, PullNone, OpenDrain
// PullUp-->3.4V, PullDown-->1.7V, PullNone-->3.5V, OpenDrain-->0.00V
DigitalInOut digitalInOut16(P3_4, PIN_INPUT, OpenDrain, 0); // P3_4 TARGET_MAX32635MBED A4/SDA (6pin analog connector)
#endif
#if HAS_digitalInOut17
// Ensure that the unused I2C pins do not interfere with analog inputs A4 and A5
DigitalInOut digitalInOut17(P3_5, PIN_INPUT, OpenDrain, 0); // P3_5 TARGET_MAX32635MBED A5/SCL (6pin analog connector)
#endif
//--------------------------------------------------
#elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
#define HAS_digitalInOut0 0
#define HAS_digitalInOut1 0
#if APPLICATION_MAX11131
// D2 -- MAX11131 EOC DigitalIn
#define HAS_digitalInOut2 0
#else
#define HAS_digitalInOut2 1
#endif
#define HAS_digitalInOut3 1
#define HAS_digitalInOut4 1
#define HAS_digitalInOut5 1
#define HAS_digitalInOut6 1
#define HAS_digitalInOut7 1
#if APPLICATION_MAX5715
// D8 -- MAX5715 CLRb DigitalOut
#define HAS_digitalInOut8 0
#else
#define HAS_digitalInOut8 1
#endif
#if APPLICATION_MAX5715
// D9 -- MAX5715 LDACb DigitalOut
#define HAS_digitalInOut9 0
#elif APPLICATION_MAX11131
// D9 -- MAX11131 CNVST DigitalOut
#define HAS_digitalInOut9 0
#else
#define HAS_digitalInOut9 1
#endif
#if HAS_SPI
// avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
// Arduino digital pin D10 SPI function is CS/10
// Arduino digital pin D11 SPI function is MOSI/11
// Arduino digital pin D12 SPI function is MISO/12
// Arduino digital pin D13 SPI function is SCK/13
#define HAS_digitalInOut10 0
#define HAS_digitalInOut11 0
#define HAS_digitalInOut12 0
#define HAS_digitalInOut13 0
#else // HAS_SPI
#define HAS_digitalInOut10 1
#define HAS_digitalInOut11 1
#define HAS_digitalInOut12 1
#define HAS_digitalInOut13 1
#endif // HAS_SPI
#if HAS_I2C
// avoid resource conflict between P5_7, P6_0 I2C and DigitalInOut
// Arduino digital pin D14 I2C function is A4/SDA (10pin digital connector)
// Arduino digital pin D15 I2C function is A5/SCL (10pin digital connector)
// Arduino digital pin D16 I2C function is A4/SDA (6pin analog connector)
// Arduino digital pin D17 I2C function is A5/SCL (6pin analog connector)
#define HAS_digitalInOut14 0
#define HAS_digitalInOut15 0
#define HAS_digitalInOut16 0
#define HAS_digitalInOut17 0
#else // HAS_I2C
#define HAS_digitalInOut14 1
#define HAS_digitalInOut15 1
#define HAS_digitalInOut16 0
#define HAS_digitalInOut17 0
#endif // HAS_I2C
#if HAS_digitalInOut0
DigitalInOut digitalInOut0(D0, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut1
DigitalInOut digitalInOut1(D1, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut2
DigitalInOut digitalInOut2(D2, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut3
DigitalInOut digitalInOut3(D3, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut4
DigitalInOut digitalInOut4(D4, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut5
DigitalInOut digitalInOut5(D5, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut6
DigitalInOut digitalInOut6(D6, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut7
DigitalInOut digitalInOut7(D7, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut8
DigitalInOut digitalInOut8(D8, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut9
DigitalInOut digitalInOut9(D9, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut10
// Arduino digital pin D10 SPI function is CS/10
DigitalInOut digitalInOut10(D10, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut11
// Arduino digital pin D11 SPI function is MOSI/11
DigitalInOut digitalInOut11(D11, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut12
// Arduino digital pin D12 SPI function is MISO/12
DigitalInOut digitalInOut12(D12, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut13
// Arduino digital pin D13 SPI function is SCK/13
DigitalInOut digitalInOut13(D13, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut14
// Arduino digital pin D14 I2C function is A4/SDA (10pin digital connector)
DigitalInOut digitalInOut14(D14, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut15
// Arduino digital pin D15 I2C function is A5/SCL (10pin digital connector)
DigitalInOut digitalInOut15(D15, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut16
// Arduino digital pin D16 I2C function is A4/SDA (6pin analog connector)
DigitalInOut digitalInOut16(D16, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut17
// Arduino digital pin D17 I2C function is A5/SCL (6pin analog connector)
DigitalInOut digitalInOut17(D17, PIN_INPUT, PullUp, 1);
#endif
//--------------------------------------------------
#elif defined(TARGET_LPC1768)
#define HAS_digitalInOut0 1
#define HAS_digitalInOut1 1
#define HAS_digitalInOut2 1
#define HAS_digitalInOut3 1
#define HAS_digitalInOut4 1
#define HAS_digitalInOut5 1
#define HAS_digitalInOut6 1
#define HAS_digitalInOut7 1
#define HAS_digitalInOut8 1
#define HAS_digitalInOut9 1
// #define HAS_digitalInOut10 1
// #define HAS_digitalInOut11 1
// #define HAS_digitalInOut12 1
// #define HAS_digitalInOut13 1
// #define HAS_digitalInOut14 1
// #define HAS_digitalInOut15 1
#if HAS_digitalInOut0
DigitalInOut digitalInOut0(p5, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.9/I2STX_SDA/MOSI1/MAT2.3
#endif
#if HAS_digitalInOut1
DigitalInOut digitalInOut1(p6, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.8/I2STX_WS/MISO1/MAT2.2
#endif
#if HAS_digitalInOut2
DigitalInOut digitalInOut2(p7, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.7/I2STX_CLK/SCK1/MAT2.1
#endif
#if HAS_digitalInOut3
DigitalInOut digitalInOut3(p8, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.6/I2SRX_SDA/SSEL1/MAT2.0
#endif
#if HAS_digitalInOut4
DigitalInOut digitalInOut4(p9, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.0/CAN_RX1/TXD3/SDA1
#endif
#if HAS_digitalInOut5
DigitalInOut digitalInOut5(p10, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.1/CAN_TX1/RXD3/SCL1
#endif
#if HAS_digitalInOut6
DigitalInOut digitalInOut6(p11, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.18/DCD1/MOSI0/MOSI1
#endif
#if HAS_digitalInOut7
DigitalInOut digitalInOut7(p12, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.17/CTS1/MISO0/MISO
#endif
#if HAS_digitalInOut8
DigitalInOut digitalInOut8(p13, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.15/TXD1/SCK0/SCK
#endif
#if HAS_digitalInOut9
DigitalInOut digitalInOut9(p14, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.16/RXD1/SSEL0/SSEL
#endif
//
// these pins support analog input analogIn0 .. analogIn5
//DigitalInOut digitalInOut_(p15, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.23/AD0.0/I2SRX_CLK/CAP3.0
//DigitalInOut digitalInOut_(p16, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.24/AD0.1/I2SRX_WS/CAP3.1
//DigitalInOut digitalInOut_(p17, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.25/AD0.2/I2SRX_SDA/TXD3
//DigitalInOut digitalInOut_(p18, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.26/AD0.3/AOUT/RXD3
//DigitalInOut digitalInOut_(p19, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P1.30/VBUS/AD0.4
//DigitalInOut digitalInOut_(p20, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P1.31/SCK1/AD0.5
//
// these pins support PWM pwmDriver1 .. pwmDriver6
//DigitalInOut digitalInOut_(p21, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.5/PWM1.6/DTR1/TRACEDATA0
//DigitalInOut digitalInOut_(p22, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.4/PWM1.5/DSR1/TRACEDATA1
//DigitalInOut digitalInOut_(p23, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.3/PWM1.4/DCD1/TRACEDATA2
//DigitalInOut digitalInOut_(p24, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.2/PWM1.3/CTS1/TRACEDATA3
//DigitalInOut digitalInOut_(p25, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.1/PWM1.2/RXD1
//DigitalInOut digitalInOut_(p26, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P2.0/PWM1.1/TXD1/TRACECLK
//
// these could be additional digitalInOut pins
#if HAS_digitalInOut10
DigitalInOut digitalInOut10(p27, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.11/RXD2/SCL2/MAT3.1
#endif
#if HAS_digitalInOut11
DigitalInOut digitalInOut11(p28, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.10/TXD2/SDA2/MAT3.0
#endif
#if HAS_digitalInOut12
DigitalInOut digitalInOut12(p29, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.5/I2SRX_WS/CAN_TX2/CAP2.1
#endif
#if HAS_digitalInOut13
DigitalInOut digitalInOut13(p30, PIN_INPUT, PullUp, 1); // TARGET_LPC1768 P0.4/I2SRX_CLK/CAN_RX2/CAP2.0
#endif
#if HAS_digitalInOut14
DigitalInOut digitalInOut14(___, PIN_INPUT, PullUp, 1);
#endif
#if HAS_digitalInOut15
DigitalInOut digitalInOut15(___, PIN_INPUT, PullUp, 1);
#endif
#else
// unknown target
#endif
// uncrustify-0.66.1 *INDENT-ON*
#if HAS_digitalInOut0 || HAS_digitalInOut1 \
|| HAS_digitalInOut2 || HAS_digitalInOut3 \
|| HAS_digitalInOut4 || HAS_digitalInOut5 \
|| HAS_digitalInOut6 || HAS_digitalInOut7 \
|| HAS_digitalInOut8 || HAS_digitalInOut9 \
|| HAS_digitalInOut10 || HAS_digitalInOut11 \
|| HAS_digitalInOut12 || HAS_digitalInOut13 \
|| HAS_digitalInOut14 || HAS_digitalInOut15 \
|| HAS_digitalInOut16 || HAS_digitalInOut17
#define HAS_digitalInOuts 1
#else
#warning "Note: There are no digitalInOut resources defined"
#endif
// uncrustify-0.66.1 *INDENT-OFF*
//--------------------------------------------------
// Declare the AnalogIn driver
// Optional analogIn support. If there is only one it should be analogIn1.
// A) analog input
#if defined(TARGET_MAX32630)
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#define HAS_analogIn6 1
#define HAS_analogIn7 1
#define HAS_analogIn8 1
#define HAS_analogIn9 1
// #define HAS_analogIn10 0
// #define HAS_analogIn11 0
// #define HAS_analogIn12 0
// #define HAS_analogIn13 0
// #define HAS_analogIn14 0
// #define HAS_analogIn15 0
#if HAS_analogIn0
AnalogIn analogIn0(AIN_0); // TARGET_MAX32630 J1.5 AIN_0 = AIN0 pin fullscale is 1.2V
#endif
#if HAS_analogIn1
AnalogIn analogIn1(AIN_1); // TARGET_MAX32630 J1.6 AIN_1 = AIN1 pin fullscale is 1.2V
#endif
#if HAS_analogIn2
AnalogIn analogIn2(AIN_2); // TARGET_MAX32630 J1.7 AIN_2 = AIN2 pin fullscale is 1.2V
#endif
#if HAS_analogIn3
AnalogIn analogIn3(AIN_3); // TARGET_MAX32630 J1.8 AIN_3 = AIN3 pin fullscale is 1.2V
#endif
#if HAS_analogIn4
AnalogIn analogIn4(AIN_4); // TARGET_MAX32630 J1.5 AIN_4 = AIN0 / 5.0 fullscale is 6.0V
#endif
#if HAS_analogIn5
AnalogIn analogIn5(AIN_5); // TARGET_MAX32630 J1.6 AIN_5 = AIN1 / 5.0 fullscale is 6.0V
#endif
#if HAS_analogIn6
AnalogIn analogIn6(AIN_6); // TARGET_MAX32630 AIN_6 = VDDB / 4.0 fullscale is 4.8V
#endif
#if HAS_analogIn7
AnalogIn analogIn7(AIN_7); // TARGET_MAX32630 AIN_7 = VDD18 fullscale is 1.2V
#endif
#if HAS_analogIn8
AnalogIn analogIn8(AIN_8); // TARGET_MAX32630 AIN_8 = VDD12 fullscale is 1.2V
#endif
#if HAS_analogIn9
AnalogIn analogIn9(AIN_9); // TARGET_MAX32630 AIN_9 = VRTC / 2.0 fullscale is 2.4V
#endif
#if HAS_analogIn10
AnalogIn analogIn10(____); // TARGET_MAX32630 AIN_10 = x undefined?
#endif
#if HAS_analogIn11
AnalogIn analogIn11(____); // TARGET_MAX32630 AIN_11 = VDDIO / 4.0 fullscale is 4.8V
#endif
#if HAS_analogIn12
AnalogIn analogIn12(____); // TARGET_MAX32630 AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
#endif
#if HAS_analogIn13
AnalogIn analogIn13(____);
#endif
#if HAS_analogIn14
AnalogIn analogIn14(____);
#endif
#if HAS_analogIn15
AnalogIn analogIn15(____);
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32625MBED)
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#if HAS_analogIn0
AnalogIn analogIn0(AIN_0); // TARGET_MAX32630 J1.5 AIN_0 = AIN0 pin fullscale is 1.2V
#endif
#if HAS_analogIn1
AnalogIn analogIn1(AIN_1); // TARGET_MAX32630 J1.6 AIN_1 = AIN1 pin fullscale is 1.2V
#endif
#if HAS_analogIn2
AnalogIn analogIn2(AIN_2); // TARGET_MAX32630 J1.7 AIN_2 = AIN2 pin fullscale is 1.2V
#endif
#if HAS_analogIn3
AnalogIn analogIn3(AIN_3); // TARGET_MAX32630 J1.8 AIN_3 = AIN3 pin fullscale is 1.2V
#endif
#if HAS_analogIn4
AnalogIn analogIn4(AIN_4); // TARGET_MAX32630 J1.5 AIN_4 = AIN0 / 5.0 fullscale is 6.0V
#endif
#if HAS_analogIn5
AnalogIn analogIn5(AIN_5); // TARGET_MAX32630 J1.6 AIN_5 = AIN1 / 5.0 fullscale is 6.0V
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32620FTHR)
#warning "TARGET_MAX32620FTHR not previously tested; need to verify analogIn0..."
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#define HAS_analogIn6 1
#define HAS_analogIn7 1
#define HAS_analogIn8 1
#define HAS_analogIn9 1
// #define HAS_analogIn10 0
// #define HAS_analogIn11 0
// #define HAS_analogIn12 0
// #define HAS_analogIn13 0
// #define HAS_analogIn14 0
// #define HAS_analogIn15 0
#if HAS_analogIn0
AnalogIn analogIn0(AIN_0); // TARGET_MAX32620FTHR J1.5 AIN_0 = AIN0 pin fullscale is 1.2V
#endif
#if HAS_analogIn1
AnalogIn analogIn1(AIN_1); // TARGET_MAX32620FTHR J1.6 AIN_1 = AIN1 pin fullscale is 1.2V
#endif
#if HAS_analogIn2
AnalogIn analogIn2(AIN_2); // TARGET_MAX32620FTHR J1.7 AIN_2 = AIN2 pin fullscale is 1.2V
#endif
#if HAS_analogIn3
AnalogIn analogIn3(AIN_3); // TARGET_MAX32620FTHR J1.8 AIN_3 = AIN3 pin fullscale is 1.2V
#endif
#if HAS_analogIn4
AnalogIn analogIn4(AIN_4); // TARGET_MAX32620FTHR J1.5 AIN_4 = AIN0 / 5.0 fullscale is 6.0V
#endif
#if HAS_analogIn5
AnalogIn analogIn5(AIN_5); // TARGET_MAX32620FTHR J1.6 AIN_5 = AIN1 / 5.0 fullscale is 6.0V
#endif
#if HAS_analogIn6
AnalogIn analogIn6(AIN_6); // TARGET_MAX32620FTHR AIN_6 = VDDB / 4.0 fullscale is 4.8V
#endif
#if HAS_analogIn7
AnalogIn analogIn7(AIN_7); // TARGET_MAX32620FTHR AIN_7 = VDD18 fullscale is 1.2V
#endif
#if HAS_analogIn8
AnalogIn analogIn8(AIN_8); // TARGET_MAX32620FTHR AIN_8 = VDD12 fullscale is 1.2V
#endif
#if HAS_analogIn9
AnalogIn analogIn9(AIN_9); // TARGET_MAX32620FTHR AIN_9 = VRTC / 2.0 fullscale is 2.4V
#endif
#if HAS_analogIn10
AnalogIn analogIn10(____); // TARGET_MAX32620FTHR AIN_10 = x undefined?
#endif
#if HAS_analogIn11
AnalogIn analogIn11(____); // TARGET_MAX32620FTHR AIN_11 = VDDIO / 4.0 fullscale is 4.8V
#endif
#if HAS_analogIn12
AnalogIn analogIn12(____); // TARGET_MAX32620FTHR AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
#endif
#if HAS_analogIn13
AnalogIn analogIn13(____);
#endif
#if HAS_analogIn14
AnalogIn analogIn14(____);
#endif
#if HAS_analogIn15
AnalogIn analogIn15(____);
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32625PICO)
#warning "TARGET_MAX32625PICO not previously tested; need to verify analogIn0..."
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#if HAS_analogIn0
AnalogIn analogIn0(AIN_0); // TARGET_MAX32630 J1.5 AIN_0 = AIN0 pin fullscale is 1.2V
#endif
#if HAS_analogIn1
AnalogIn analogIn1(AIN_1); // TARGET_MAX32630 J1.6 AIN_1 = AIN1 pin fullscale is 1.2V
#endif
#if HAS_analogIn2
AnalogIn analogIn2(AIN_2); // TARGET_MAX32630 J1.7 AIN_2 = AIN2 pin fullscale is 1.2V
#endif
#if HAS_analogIn3
AnalogIn analogIn3(AIN_3); // TARGET_MAX32630 J1.8 AIN_3 = AIN3 pin fullscale is 1.2V
#endif
#if HAS_analogIn4
AnalogIn analogIn4(AIN_4); // TARGET_MAX32630 J1.5 AIN_4 = AIN0 / 5.0 fullscale is 6.0V
#endif
#if HAS_analogIn5
AnalogIn analogIn5(AIN_5); // TARGET_MAX32630 J1.6 AIN_5 = AIN1 / 5.0 fullscale is 6.0V
#endif
//--------------------------------------------------
#elif defined(TARGET_MAX32600)
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#if HAS_analogIn0
AnalogIn analogIn0(A0);
#endif
#if HAS_analogIn1
AnalogIn analogIn1(A1);
#endif
#if HAS_analogIn2
AnalogIn analogIn2(A2);
#endif
#if HAS_analogIn3
AnalogIn analogIn3(A3);
#endif
#if HAS_analogIn4
AnalogIn analogIn4(A4);
#endif
#if HAS_analogIn5
AnalogIn analogIn5(A5);
#endif
//--------------------------------------------------
#elif defined(TARGET_NUCLEO_F446RE)
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#if HAS_analogIn0
AnalogIn analogIn0(A0);
#endif
#if HAS_analogIn1
AnalogIn analogIn1(A1);
#endif
#if HAS_analogIn2
AnalogIn analogIn2(A2);
#endif
#if HAS_analogIn3
AnalogIn analogIn3(A3);
#endif
#if HAS_analogIn4
AnalogIn analogIn4(A4);
#endif
#if HAS_analogIn5
AnalogIn analogIn5(A5);
#endif
//--------------------------------------------------
#elif defined(TARGET_NUCLEO_F401RE)
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
#if HAS_analogIn0
AnalogIn analogIn0(A0);
#endif
#if HAS_analogIn1
AnalogIn analogIn1(A1);
#endif
#if HAS_analogIn2
AnalogIn analogIn2(A2);
#endif
#if HAS_analogIn3
AnalogIn analogIn3(A3);
#endif
#if HAS_analogIn4
AnalogIn analogIn4(A4);
#endif
#if HAS_analogIn5
AnalogIn analogIn5(A5);
#endif
//--------------------------------------------------
// TODO1: TARGET=MAX32625MBED ARM Cortex-M4F 96MHz 512kB Flash 160kB SRAM
#elif defined(TARGET_LPC1768)
#define HAS_analogIn0 1
#define HAS_analogIn1 1
#define HAS_analogIn2 1
#define HAS_analogIn3 1
#define HAS_analogIn4 1
#define HAS_analogIn5 1
// #define HAS_analogIn6 1
// #define HAS_analogIn7 1
// #define HAS_analogIn8 1
// #define HAS_analogIn9 1
// #define HAS_analogIn10 1
// #define HAS_analogIn11 1
// #define HAS_analogIn12 1
// #define HAS_analogIn13 1
// #define HAS_analogIn14 1
// #define HAS_analogIn15 1
#if HAS_analogIn0
AnalogIn analogIn0(p15); // TARGET_LPC1768 P0.23/AD0.0/I2SRX_CLK/CAP3.0
#endif
#if HAS_analogIn1
AnalogIn analogIn1(p16); // TARGET_LPC1768 P0.24/AD0.1/I2SRX_WS/CAP3.1
#endif
#if HAS_analogIn2
AnalogIn analogIn2(p17); // TARGET_LPC1768 P0.25/AD0.2/I2SRX_SDA/TXD3
#endif
#if HAS_analogIn3
AnalogIn analogIn3(p18); // TARGET_LPC1768 P0.26/AD0.3/AOUT/RXD3
#endif
#if HAS_analogIn4
AnalogIn analogIn4(p19); // TARGET_LPC1768 P1.30/VBUS/AD0.4
#endif
#if HAS_analogIn5
AnalogIn analogIn5(p20); // TARGET_LPC1768 P1.31/SCK1/AD0.5
#endif
#if HAS_analogIn6
AnalogIn analogIn6(____);
#endif
#if HAS_analogIn7
AnalogIn analogIn7(____);
#endif
#if HAS_analogIn8
AnalogIn analogIn8(____);
#endif
#if HAS_analogIn9
AnalogIn analogIn9(____);
#endif
#if HAS_analogIn10
AnalogIn analogIn10(____);
#endif
#if HAS_analogIn11
AnalogIn analogIn11(____);
#endif
#if HAS_analogIn12
AnalogIn analogIn12(____);
#endif
#if HAS_analogIn13
AnalogIn analogIn13(____);
#endif
#if HAS_analogIn14
AnalogIn analogIn14(____);
#endif
#if HAS_analogIn15
AnalogIn analogIn15(____);
#endif
#else
// unknown target
#endif
// uncrustify-0.66.1 *INDENT-ON*
#if HAS_analogIn0 || HAS_analogIn1 \
|| HAS_analogIn2 || HAS_analogIn3 \
|| HAS_analogIn4 || HAS_analogIn5 \
|| HAS_analogIn6 || HAS_analogIn7 \
|| HAS_analogIn8 || HAS_analogIn9 \
|| HAS_analogIn10 || HAS_analogIn11 \
|| HAS_analogIn12 || HAS_analogIn13 \
|| HAS_analogIn14 || HAS_analogIn15
#define HAS_analogIns 1
#else
#warning "Note: There are no analogIn resources defined"
#endif
// DigitalInOut pin resource: print the pin index names to serial
#if HAS_digitalInOuts
void list_digitalInOutPins(Stream& serialStream)
{
#if HAS_digitalInOut0
serialStream.printf(" 0");
#endif
#if HAS_digitalInOut1
serialStream.printf(" 1");
#endif
#if HAS_digitalInOut2
serialStream.printf(" 2");
#endif
#if HAS_digitalInOut3
serialStream.printf(" 3");
#endif
#if HAS_digitalInOut4
serialStream.printf(" 4");
#endif
#if HAS_digitalInOut5
serialStream.printf(" 5");
#endif
#if HAS_digitalInOut6
serialStream.printf(" 6");
#endif
#if HAS_digitalInOut7
serialStream.printf(" 7");
#endif
#if HAS_digitalInOut8
serialStream.printf(" 8");
#endif
#if HAS_digitalInOut9
serialStream.printf(" 9");
#endif
#if HAS_digitalInOut10
serialStream.printf(" 10");
#endif
#if HAS_digitalInOut11
serialStream.printf(" 11");
#endif
#if HAS_digitalInOut12
serialStream.printf(" 12");
#endif
#if HAS_digitalInOut13
serialStream.printf(" 13");
#endif
#if HAS_digitalInOut14
serialStream.printf(" 14");
#endif
#if HAS_digitalInOut15
serialStream.printf(" 15");
#endif
#if HAS_digitalInOut16
serialStream.printf(" 16");
#endif
#if HAS_digitalInOut17
serialStream.printf(" 17");
#endif
}
#endif
// DigitalInOut pin resource: search index
#if HAS_digitalInOuts
DigitalInOut& find_digitalInOutPin(int cPinIndex)
{
switch (cPinIndex)
{
default: // default to the first defined digitalInOut pin
#if HAS_digitalInOut0
case '0': case 0x00: return digitalInOut0;
#endif
#if HAS_digitalInOut1
case '1': case 0x01: return digitalInOut1;
#endif
#if HAS_digitalInOut2
case '2': case 0x02: return digitalInOut2;
#endif
#if HAS_digitalInOut3
case '3': case 0x03: return digitalInOut3;
#endif
#if HAS_digitalInOut4
case '4': case 0x04: return digitalInOut4;
#endif
#if HAS_digitalInOut5
case '5': case 0x05: return digitalInOut5;
#endif
#if HAS_digitalInOut6
case '6': case 0x06: return digitalInOut6;
#endif
#if HAS_digitalInOut7
case '7': case 0x07: return digitalInOut7;
#endif
#if HAS_digitalInOut8
case '8': case 0x08: return digitalInOut8;
#endif
#if HAS_digitalInOut9
case '9': case 0x09: return digitalInOut9;
#endif
#if HAS_digitalInOut10
case 'a': case 0x0a: return digitalInOut10;
#endif
#if HAS_digitalInOut11
case 'b': case 0x0b: return digitalInOut11;
#endif
#if HAS_digitalInOut12
case 'c': case 0x0c: return digitalInOut12;
#endif
#if HAS_digitalInOut13
case 'd': case 0x0d: return digitalInOut13;
#endif
#if HAS_digitalInOut14
case 'e': case 0x0e: return digitalInOut14;
#endif
#if HAS_digitalInOut15
case 'f': case 0x0f: return digitalInOut15;
#endif
#if HAS_digitalInOut16
case 'g': case 0x10: return digitalInOut16;
#endif
#if HAS_digitalInOut17
case 'h': case 0x11: return digitalInOut17;
#endif
}
}
#endif
// AnalogIn pin resource: search index
#if HAS_analogIns
AnalogIn& find_analogInPin(int cPinIndex)
{
switch (cPinIndex)
{
default: // default to the first defined analogIn pin
#if HAS_analogIn0
case '0': case 0x00: return analogIn0;
#endif
#if HAS_analogIn1
case '1': case 0x01: return analogIn1;
#endif
#if HAS_analogIn2
case '2': case 0x02: return analogIn2;
#endif
#if HAS_analogIn3
case '3': case 0x03: return analogIn3;
#endif
#if HAS_analogIn4
case '4': case 0x04: return analogIn4;
#endif
#if HAS_analogIn5
case '5': case 0x05: return analogIn5;
#endif
#if HAS_analogIn6
case '6': case 0x06: return analogIn6;
#endif
#if HAS_analogIn7
case '7': case 0x07: return analogIn7;
#endif
#if HAS_analogIn8
case '8': case 0x08: return analogIn8;
#endif
#if HAS_analogIn9
case '9': case 0x09: return analogIn9;
#endif
#if HAS_analogIn10
case 'a': case 0x0a: return analogIn10;
#endif
#if HAS_analogIn11
case 'b': case 0x0b: return analogIn11;
#endif
#if HAS_analogIn12
case 'c': case 0x0c: return analogIn12;
#endif
#if HAS_analogIn13
case 'd': case 0x0d: return analogIn13;
#endif
#if HAS_analogIn14
case 'e': case 0x0e: return analogIn14;
#endif
#if HAS_analogIn15
case 'f': case 0x0f: return analogIn15;
#endif
}
}
#endif
#if HAS_analogIns
const float analogInPin_fullScaleVoltage[] = {
# if defined(TARGET_MAX32630)
ADC_FULL_SCALE_VOLTAGE, // analogIn0
ADC_FULL_SCALE_VOLTAGE, // analogIn1
ADC_FULL_SCALE_VOLTAGE, // analogIn2
ADC_FULL_SCALE_VOLTAGE, // analogIn3
ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_4 = AIN0 / 5.0 fullscale is 6.0V
ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_5 = AIN1 / 5.0 fullscale is 6.0V
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn6 // AIN_6 = VDDB / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE, // analogIn7 // AIN_7 = VDD18 fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE, // analogIn8 // AIN_8 = VDD12 fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 2.0f, // analogIn9 // AIN_9 = VRTC / 2.0 fullscale is 2.4V
ADC_FULL_SCALE_VOLTAGE, // analogIn10 // AIN_10 = x undefined?
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn11 // AIN_11 = VDDIO / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn12 // AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE, // analogIn13
ADC_FULL_SCALE_VOLTAGE, // analogIn14
ADC_FULL_SCALE_VOLTAGE // analogIn15
# elif defined(TARGET_MAX32620FTHR)
#warning "TARGET_MAX32620FTHR not previously tested; need to verify analogIn0..."
ADC_FULL_SCALE_VOLTAGE, // analogIn0
ADC_FULL_SCALE_VOLTAGE, // analogIn1
ADC_FULL_SCALE_VOLTAGE, // analogIn2
ADC_FULL_SCALE_VOLTAGE, // analogIn3
ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_4 = AIN0 / 5.0 fullscale is 6.0V
ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_5 = AIN1 / 5.0 fullscale is 6.0V
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn6 // AIN_6 = VDDB / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE, // analogIn7 // AIN_7 = VDD18 fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE, // analogIn8 // AIN_8 = VDD12 fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 2.0f, // analogIn9 // AIN_9 = VRTC / 2.0 fullscale is 2.4V
ADC_FULL_SCALE_VOLTAGE, // analogIn10 // AIN_10 = x undefined?
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn11 // AIN_11 = VDDIO / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn12 // AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE, // analogIn13
ADC_FULL_SCALE_VOLTAGE, // analogIn14
ADC_FULL_SCALE_VOLTAGE // analogIn15
#elif defined(TARGET_MAX32625MBED) || defined(TARGET_MAX32625PICO)
ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn0 // fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn1 // fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn2 // fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn3 // fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_4 = AIN0 / 5.0 fullscale is 6.0V
ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_5 = AIN1 / 5.0 fullscale is 6.0V
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn6 // AIN_6 = VDDB / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE, // analogIn7 // AIN_7 = VDD18 fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE, // analogIn8 // AIN_8 = VDD12 fullscale is 1.2V
ADC_FULL_SCALE_VOLTAGE * 2.0f, // analogIn9 // AIN_9 = VRTC / 2.0 fullscale is 2.4V
ADC_FULL_SCALE_VOLTAGE, // analogIn10 // AIN_10 = x undefined?
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn11 // AIN_11 = VDDIO / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn12 // AIN_12 = VDDIOH / 4.0 fullscale is 4.8V
ADC_FULL_SCALE_VOLTAGE, // analogIn13
ADC_FULL_SCALE_VOLTAGE, // analogIn14
ADC_FULL_SCALE_VOLTAGE // analogIn15
#elif defined(TARGET_NUCLEO_F446RE)
ADC_FULL_SCALE_VOLTAGE, // analogIn0
ADC_FULL_SCALE_VOLTAGE, // analogIn1
ADC_FULL_SCALE_VOLTAGE, // analogIn2
ADC_FULL_SCALE_VOLTAGE, // analogIn3
ADC_FULL_SCALE_VOLTAGE, // analogIn4
ADC_FULL_SCALE_VOLTAGE, // analogIn5
ADC_FULL_SCALE_VOLTAGE, // analogIn6
ADC_FULL_SCALE_VOLTAGE, // analogIn7
ADC_FULL_SCALE_VOLTAGE, // analogIn8
ADC_FULL_SCALE_VOLTAGE, // analogIn9
ADC_FULL_SCALE_VOLTAGE, // analogIn10
ADC_FULL_SCALE_VOLTAGE, // analogIn11
ADC_FULL_SCALE_VOLTAGE, // analogIn12
ADC_FULL_SCALE_VOLTAGE, // analogIn13
ADC_FULL_SCALE_VOLTAGE, // analogIn14
ADC_FULL_SCALE_VOLTAGE // analogIn15
#elif defined(TARGET_NUCLEO_F401RE)
ADC_FULL_SCALE_VOLTAGE, // analogIn0
ADC_FULL_SCALE_VOLTAGE, // analogIn1
ADC_FULL_SCALE_VOLTAGE, // analogIn2
ADC_FULL_SCALE_VOLTAGE, // analogIn3
ADC_FULL_SCALE_VOLTAGE, // analogIn4
ADC_FULL_SCALE_VOLTAGE, // analogIn5
ADC_FULL_SCALE_VOLTAGE, // analogIn6
ADC_FULL_SCALE_VOLTAGE, // analogIn7
ADC_FULL_SCALE_VOLTAGE, // analogIn8
ADC_FULL_SCALE_VOLTAGE, // analogIn9
ADC_FULL_SCALE_VOLTAGE, // analogIn10
ADC_FULL_SCALE_VOLTAGE, // analogIn11
ADC_FULL_SCALE_VOLTAGE, // analogIn12
ADC_FULL_SCALE_VOLTAGE, // analogIn13
ADC_FULL_SCALE_VOLTAGE, // analogIn14
ADC_FULL_SCALE_VOLTAGE // analogIn15
//#elif defined(TARGET_LPC1768)
#else
// unknown target
ADC_FULL_SCALE_VOLTAGE, // analogIn0
ADC_FULL_SCALE_VOLTAGE, // analogIn1
ADC_FULL_SCALE_VOLTAGE, // analogIn2
ADC_FULL_SCALE_VOLTAGE, // analogIn3
ADC_FULL_SCALE_VOLTAGE, // analogIn4
ADC_FULL_SCALE_VOLTAGE, // analogIn5
ADC_FULL_SCALE_VOLTAGE, // analogIn6
ADC_FULL_SCALE_VOLTAGE, // analogIn7
ADC_FULL_SCALE_VOLTAGE, // analogIn8
ADC_FULL_SCALE_VOLTAGE, // analogIn9
ADC_FULL_SCALE_VOLTAGE, // analogIn10
ADC_FULL_SCALE_VOLTAGE, // analogIn11
ADC_FULL_SCALE_VOLTAGE, // analogIn12
ADC_FULL_SCALE_VOLTAGE, // analogIn13
ADC_FULL_SCALE_VOLTAGE, // analogIn14
ADC_FULL_SCALE_VOLTAGE // analogIn15
# endif
};
#endif
//--------------------------------------------------
// Option to validate SPI link by reading PART_ID register
#ifndef VERIFY_PART_ID_IN_LOOP
#define VERIFY_PART_ID_IN_LOOP 0
#endif
// ---------- Measure_Voltage_custom_props in Measure_Voltage @pre and in class properties ----------
// const uint8_t custom_v_filter = 0x34;
// const uint8_t custom_v_ctrl = 0x34;
// const uint8_t custom_v_pga = 0x34;
// ---------- Measure_Voltage_custom_props ----------
// ---------- CUSTOMIZED from MAX11410_Hello after g_MAX11410_device.Init() ----------
// filter register configuration in Measure_Voltage and Read_All_Voltages CONV_TYPE_01_Continuous
//~ const uint8_t custom_v_filter = 0x34; // @ v_filter=0x34 --*LINEF_11_SINC4 RATE_0100 | 60SPS
//~ const uint8_t custom_v_filter = 0x00; // @ v_filter=0x00 -- LINEF_00_50Hz_60Hz_FIR RATE_0000 | 1.1SPS
//~ const uint8_t custom_v_filter = 0x01; // @ v_filter=0x01 -- LINEF_00_50Hz_60Hz_FIR RATE_0001 | 2.1SPS
//~ const uint8_t custom_v_filter = 0x02; // @ v_filter=0x02 -- LINEF_00_50Hz_60Hz_FIR RATE_0010 | 4.2SPS
//~ const uint8_t custom_v_filter = 0x03; // @ v_filter=0x03 -- LINEF_00_50Hz_60Hz_FIR RATE_0011 | 8.4SPS
//~ const uint8_t custom_v_filter = 0x04; // @ v_filter=0x04 -- LINEF_00_50Hz_60Hz_FIR RATE_0100 | 16.8SPS
//~ const uint8_t custom_v_filter = 0x10; // @ v_filter=0x10 -- LINEF_01_50Hz_FIR RATE_0000 | 1.3SPS
//~ const uint8_t custom_v_filter = 0x11; // @ v_filter=0x11 -- LINEF_01_50Hz_FIR RATE_0001 | 2.7SPS
//~ const uint8_t custom_v_filter = 0x12; // @ v_filter=0x12 -- LINEF_01_50Hz_FIR RATE_0010 | 5.3SPS
//~ const uint8_t custom_v_filter = 0x13; // @ v_filter=0x13 -- LINEF_01_50Hz_FIR RATE_0011 | 10.7SPS
//~ const uint8_t custom_v_filter = 0x14; // @ v_filter=0x14 -- LINEF_01_50Hz_FIR RATE_0100 | 21.3SPS
//~ const uint8_t custom_v_filter = 0x15; // @ v_filter=0x15 -- LINEF_01_50Hz_FIR RATE_0101 | 40.0SPS
//~ const uint8_t custom_v_filter = 0x20; // @ v_filter=0x20 -- LINEF_10_60Hz_FIR RATE_0000 | 1.3SPS
//~ const uint8_t custom_v_filter = 0x21; // @ v_filter=0x21 -- LINEF_10_60Hz_FIR RATE_0001 | 2.7SPS
//~ const uint8_t custom_v_filter = 0x22; // @ v_filter=0x22 -- LINEF_10_60Hz_FIR RATE_0010 | 5.3SPS
//~ const uint8_t custom_v_filter = 0x23; // @ v_filter=0x23 -- LINEF_10_60Hz_FIR RATE_0011 | 10.7SPS
//~ const uint8_t custom_v_filter = 0x24; // @ v_filter=0x24 -- LINEF_10_60Hz_FIR RATE_0100 | 21.3SPS
//~ const uint8_t custom_v_filter = 0x25; // @ v_filter=0x25 -- LINEF_10_60Hz_FIR RATE_0101 | 40.0SPS
//~ const uint8_t custom_v_filter = 0x30; // @ v_filter=0x30 -- LINEF_11_SINC4 RATE_0000 | 4SPS
//~ const uint8_t custom_v_filter = 0x31; // @ v_filter=0x31 -- LINEF_11_SINC4 RATE_0001 | 10SPS
//~ const uint8_t custom_v_filter = 0x32; // @ v_filter=0x32 -- LINEF_11_SINC4 RATE_0010 | 20SPS
//~ const uint8_t custom_v_filter = 0x33; // @ v_filter=0x33 -- LINEF_11_SINC4 RATE_0011 | 40SPS
//~ const uint8_t custom_v_filter = 0x34; // @ v_filter=0x34 --*LINEF_11_SINC4 RATE_0100 | 60SPS
//~ const uint8_t custom_v_filter = 0x35; // @ v_filter=0x35 -- LINEF_11_SINC4 RATE_0101 | 120SPS
//~ const uint8_t custom_v_filter = 0x36; // @ v_filter=0x36 -- LINEF_11_SINC4 RATE_0110 | 240SPS
//~ const uint8_t custom_v_filter = 0x37; // @ v_filter=0x37 -- LINEF_11_SINC4 RATE_0111 | 480SPS
//~ const uint8_t custom_v_filter = 0x38; // @ v_filter=0x38 -- LINEF_11_SINC4 RATE_1000 | 960SPS
//~ const uint8_t custom_v_filter = 0x39; // @ v_filter=0x39 -- LINEF_11_SINC4 RATE_1001 | 1920SPS
// ---------- CUSTOMIZED from MAX11410_Hello ----------
//
// ---------- CUSTOMIZED from MAX11410_Hello after g_MAX11410_device.Init() ----------
// pga register configuration in Measure_Voltage and Read_All_Voltages
//~ const uint8_t custom_v_pga = 0x00; // @ v_pga=0x00 -- 0x00 SIG_PATH_00_BUFFERED
//~ const uint8_t custom_v_pga = 0x00; // @ v_pga=0x00 -- 0x00 SIG_PATH_00_BUFFERED
//~ const uint8_t custom_v_pga = 0x10; // @ v_pga=0x10 -- 0x10 SIG_PATH_01_BYPASS
//~ const uint8_t custom_v_pga = 0x20; // @ v_pga=0x20 -- 0x20 SIG_PATH_10_PGA GAIN_000_1
//~ const uint8_t custom_v_pga = 0x21; // @ v_pga=0x21 --*0x21 SIG_PATH_10_PGA GAIN_001_2
//~ const uint8_t custom_v_pga = 0x22; // @ v_pga=0x22 -- 0x22 SIG_PATH_10_PGA GAIN_010_4
//~ const uint8_t custom_v_pga = 0x23; // @ v_pga=0x23 -- 0x23 SIG_PATH_10_PGA GAIN_011_8
//~ const uint8_t custom_v_pga = 0x24; // @ v_pga=0x24 -- 0x24 SIG_PATH_10_PGA GAIN_100_16
//~ const uint8_t custom_v_pga = 0x25; // @ v_pga=0x25 -- 0x25 SIG_PATH_10_PGA GAIN_101_32
//~ const uint8_t custom_v_pga = 0x26; // @ v_pga=0x26 -- 0x26 SIG_PATH_10_PGA GAIN_110_64
//~ const uint8_t custom_v_pga = 0x27; // @ v_pga=0x27 -- 0x27 SIG_PATH_10_PGA GAIN_111_128
// ---------- CUSTOMIZED from MAX11410_Hello ----------
//
// ---------- CUSTOMIZED from MAX11410_Hello after g_MAX11410_device.Init() ----------
// ctrl register configuration in Measure_Voltage and Read_All_Voltages
//~ const uint8_t custom_v_ctrl = 0x02; // @ v_ctrl=0x02 -- 0x00 bipolar 2's complement, 0x02 REF_SEL_010_REF2P_REF2N
//~ const uint8_t custom_v_ctrl = 0x40; // @ v_ctrl=0x40 -- 0x40 unipolar, 0x00 REF_SEL_000_AIN0_AIN1
//~ const uint8_t custom_v_ctrl = 0x44; // @ v_ctrl=0x44 -- 0x40 unipolar, 0x04 REF_SEL_100_AIN0_AGND
//~ const uint8_t custom_v_ctrl = 0x58; // @ v_ctrl=0x58 -- 0x40 unipolar, 0x00 REF_SEL_000_AIN0_AIN1, 0x18 refbuf
//
//~ const uint8_t custom_v_ctrl = 0x41; // @ v_ctrl=0x41 -- 0x40 unipolar, 0x01 REF_SEL_001_REF1P_REF1N
//~ const uint8_t custom_v_ctrl = 0x45; // @ v_ctrl=0x45 -- 0x40 unipolar, 0x05 REF_SEL_101_REF1P_AGND
//~ const uint8_t custom_v_ctrl = 0x59; // @ v_ctrl=0x59 -- 0x40 unipolar, 0x01 REF_SEL_001_REF1P_REF1N, 0x18 refbuf
//
//~ const uint8_t custom_v_ctrl = 0x42; // @ v_ctrl=0x42 -- 0x40 unipolar, 0x02 REF_SEL_010_REF2P_REF2N
//~ const uint8_t custom_v_ctrl = 0x46; // @ v_ctrl=0x46 -- 0x40 unipolar, 0x06 REF_SEL_110_REF2P_AGND
//~ const uint8_t custom_v_ctrl = 0x22; // @ v_ctrl=0x22 -- 0x20 bipolar offset binary, 0x02 REF_SEL_010_REF2P_REF2N
//~ const uint8_t custom_v_ctrl = 0x02; // @ v_ctrl=0x02 -- 0x00 bipolar 2's complement, 0x02 REF_SEL_010_REF2P_REF2N
//
//~ const uint8_t custom_v_ctrl = 0x44; // @ v_ctrl=0x44 -- 0x40 unipolar, 0x04 REF_SEL_100_AIN0_AGND
//~ const uint8_t custom_v_ctrl = 0x47; // @ v_ctrl=0x47 -- 0x40 unipolar, 0x07 REF_SEL_111_AVDD_AGND
//~ const uint8_t custom_v_ctrl = 0x27; // @ v_ctrl=0x27 -- 0x20 bipolar offset binary, 0x07 REF_SEL_111_AVDD_AGND
//~ const uint8_t custom_v_ctrl = 0x07; // @ v_ctrl=0x07 -- 0x00 bipolar 2's complement, 0x07 REF_SEL_111_AVDD_AGND
// ---------- CUSTOMIZED from MAX11410_Hello ----------
// example code declare SPI interface (GPIO controlled CS)
#if defined(TARGET_MAX32625MBED)
SPI spi(SPI1_MOSI, SPI1_MISO, SPI1_SCK); // mosi, miso, sclk spi1 TARGET_MAX32625MBED: P1_1 P1_2 P1_0 Arduino 10-pin header D11 D12 D13
DigitalOut spi_cs(SPI1_SS); // TARGET_MAX32625MBED: P1_3 Arduino 10-pin header D10
#elif defined(TARGET_MAX32625PICO)
#warning "TARGET_MAX32625PICO not previously tested; need to define pins..."
SPI spi(SPI0_MOSI, SPI0_MISO, SPI0_SCK); // mosi, miso, sclk spi1 TARGET_MAX32625PICO: pin P0_5 P0_6 P0_4
DigitalOut spi_cs(SPI0_SS); // TARGET_MAX32625PICO: pin P0_7
#elif defined(TARGET_MAX32600MBED)
SPI spi(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13
DigitalOut spi_cs(SPI2_SS); // Generic: Arduino 10-pin header D10
#elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
// TODO1: avoid resource conflict between P5_0, P5_1, P5_2 SPI and DigitalInOut
// void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
//
// TODO1: NUCLEO_F446RE SPI not working; CS and MOSI data looks OK but no SCLK clock pulses.
SPI spi(SPI_MOSI, SPI_MISO, SPI_SCK); // mosi, miso, sclk spi1 TARGET_NUCLEO_F446RE: Arduino 10-pin header D11 D12 D13
DigitalOut spi_cs(SPI_CS); // TARGET_NUCLEO_F446RE: PB_6 Arduino 10-pin header D10
//
#else
//~ SPI spi(D11, D12, D13); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13
//~ DigitalOut spi_cs(D10); // Generic: Arduino 10-pin header D10
#endif
// example code declare GPIO interface pins
// example code declare device instance
//~ MAX11410 g_MAX11410_device(spi, spi_cs, MAX11410::MAX11410_IC);
const int NUM_ANALOG_IN_CHANNELS = 6;
const double adc_full_scale_voltage[NUM_ANALOG_IN_CHANNELS] = {
1.2,
1.2,
1.2,
1.2,
1.2,
1.2
};
double Voltage[NUM_ANALOG_IN_CHANNELS];
// CODE GENERATOR: example code for ADC: serial port declaration
// example code main function
int main()
{
// setup: put your setup code here, to run once
// example code: serial port banner message
wait(3); // 3000ms timing delay function, platform-specific
cmdLine.serial().printf("\r\nInternal_DataLogger\r\n"); // instead of Hello_MAX11410
// // CODE GENERATOR: get spi properties from device
// if (g_SPI_SCLK_Hz > g_MAX11410_device.get_spi_frequency())
// { // Device limits SPI SCLK frequency
// g_SPI_SCLK_Hz = g_MAX11410_device.get_spi_frequency();
// cmdLine.serial().printf("\r\nMAX11410 limits SPI SCLK frequency to %ld Hz\r\n", g_SPI_SCLK_Hz);
//
// g_MAX11410_device.Init();
// }
// if (g_MAX11410_device.get_spi_frequency() > g_SPI_SCLK_Hz)
// { // Platform limits SPI SCLK frequency
// g_MAX11410_device.spi_frequency(g_SPI_SCLK_Hz);
// cmdLine.serial().printf("\r\nPlatform limits MAX11410 SPI SCLK frequency to %ld Hz\r\n", g_SPI_SCLK_Hz);
//
// g_MAX11410_device.Init();
// }
// g_SPI_dataMode = g_MAX11410_device.get_spi_dataMode();
// while (g_MAX11410_device.Init() == 0)
// {
// wait(3); // 3000ms timing delay function, platform-specific
// cmdLine.serial().printf("\r\nMAX11410 Init failed; retry...\r\n");
//
// }
// ---------- CUSTOMIZED from MAX11410_Hello after g_MAX11410_device.Init() ----------
//~ g_MAX11410_device.v_filter = custom_v_filter;
//~ g_MAX11410_device.v_pga = custom_v_pga;
//~ g_MAX11410_device.v_ctrl = custom_v_ctrl;
// ---------- CUSTOMIZED from MAX11410_Hello ----------
// CODE GENERATOR: example code: has no member function REF
// CODE GENERATOR: example code for ADC: repeat-forever convert and print conversion result, one record per line
// CODE GENERATOR: ResolutionBits = 24
// CODE GENERATOR: FScode = 0xffffff
// CODE GENERATOR: NumChannels = 10
// CODE GENERATOR: banner before DataLogHelloCppCodeList while(1)
//~ cmdLine.serial().printf("v_filter = 0x%2.2x\r\n", g_MAX11410_device.v_filter);
//~ cmdLine.serial().printf("v_pga = 0x%2.2x\r\n", g_MAX11410_device.v_pga);
//~ cmdLine.serial().printf("v_ctrl = 0x%2.2x\r\n", g_MAX11410_device.v_ctrl);
// banner for csv data columns
//~ cmdLine.serial().printf("\"AIN0_V\",\"AIN1_V\",\"AIN2_V\",\"AIN3_V\",\"AIN4_V\",\"AIN5_V\",\"AIN6_V\",\"AIN7_V\",\"AIN8_V\",\"AIN9_V\"");
cmdLine.serial().printf("\"AIN%d_V\"", 0);
for (int index = 1; index < NUM_ANALOG_IN_CHANNELS; index++) {
cmdLine.serial().printf(",");
cmdLine.serial().printf("\"AIN%d_V\"", index);
}
#if VERIFY_PART_ID_IN_LOOP
Serial.printf(",\"PART_ID\"\r\n");
#endif // VERIFY_PART_ID_IN_LOOP
while(1) { // this code repeats forever
// this code repeats forever
// CODE GENERATOR: example code: has no member function ScanStandardExternalClock
// CODE GENERATOR: example code: has no member function ReadAINcode
// CODE GENERATOR: example code: member function Read_All_Voltages
// Measure ADC channels in sequence from AIN0 to channelNumber_0_9.
// @param[in] g_MAX11410_device.channelNumber_0_15: AIN Channel Number
// @param[in] g_MAX11410_device.PowerManagement_0_2: 0=Normal, 1=AutoShutdown, 2=AutoStandby
// @param[in] g_MAX11410_device.chan_id_0_1: ADC_MODE_CONTROL.CHAN_ID
//~ int channelId_0_9 = 9;
//g_MAX11410_device.channelNumber_0_15 = channelId_0_9;
//g_MAX11410_device.PowerManagement_0_2 = 0;
//g_MAX11410_device.chan_id_0_1 = 1;
//~ g_MAX11410_device.Read_All_Voltages();
// mbed
// Platform board uses simple analog inputs
Voltage[0] = analogIn0.read() * adc_full_scale_voltage[0];
Voltage[1] = analogIn1.read() * adc_full_scale_voltage[1];
Voltage[2] = analogIn2.read() * adc_full_scale_voltage[2];
Voltage[3] = analogIn3.read() * adc_full_scale_voltage[3];
Voltage[4] = analogIn4.read() * adc_full_scale_voltage[4];
Voltage[5] = analogIn5.read() * adc_full_scale_voltage[5];
#if VERIFY_PART_ID_IN_LOOP
// Device ID Validation
const uint32_t part_id_expect = 0x000F02;
uint32_t part_id_readback;
g_MAX11410_device.RegRead(MAX11410::CMD_r001_0001_xxxx_xxxx_xxxx_xxxx_xxxx_xddd_PART_ID, &part_id_readback);
#endif // VERIFY_PART_ID_IN_LOOP
// wait(3.0);
// CODE GENERATOR: print conversion result
// Use Arduino Serial Plotter to view output: Tools | Serial Plotter
cmdLine.serial().printf("%6.6fV", Voltage[0]);
for (int index = 1; index < NUM_ANALOG_IN_CHANNELS; index++) {
cmdLine.serial().printf(",%6.6fV", Voltage[index]);
}
#if VERIFY_PART_ID_IN_LOOP
if (part_id_readback != part_id_expect) {
cmdLine.serial().printf(",\"FAIL\"");
//~ g_MAX11410_device.Init();
//~ g_MAX11410_device.v_filter = custom_v_filter;
//~ g_MAX11410_device.v_pga = custom_v_pga;
//~ g_MAX11410_device.v_ctrl = custom_v_ctrl;
}
else {
cmdLine.serial().printf(",\"OK\"");
}
#endif // VERIFY_PART_ID_IN_LOOP
cmdLine.serial().printf("\r\n");
} // this code repeats forever
}
//---------- CODE GENERATOR: end DataLogHelloCppCodeList