code to access the AT30TSE75x temperature and E-prom device
Dependents: AT30TSE752TST AT30TSE752TST2
AT30TSE75x.h
- Committer:
- wbeaumont
- Date:
- 2017-01-18
- Revision:
- 2:91836ad02096
- Parent:
- 1:c0db18a0c56b
- Child:
- 3:5944e2454e42
File content as of revision 2:91836ad02096:
#ifndef AT30TSE75x_H #define AT30TSE75x_H #include "getVersion.h" #include "stdbool.h" #include "dev_interface_def.h" #include "I2CInterface.h" #define VERSION_AT30TSE75x_HDR "0.90" /** AT30TSE75x class. * Used for interfacing with a AT30TSE75x temperature sensor and ee-prom * For version 0.1 inital * It has to be used with the https://developer.mbed.org/users/wbeaumont/code/DevInterfaces/ package * This includes the "virtual" I2CInterface class that is the interface to the I2C device * An implementation of the I2Cinterface class for the MBED can be found at * https://developer.mbed.org/users/wbeaumont/code/I2Cinterfaces/ * ee-prom set / read not tested / implemented. * version 0.8 : read of temperature 12 bits, fixed configuration * read /write ee-prom * version 0.86 : added ee-prom write protect mode tested ( un-protect not tested) * version 0.90 : added all set and get functions for reading the config register(s) * most of the functions are not tested . * this code is only tested with the AT30TSE752 version ( 2 KBit version) * v * processor board for the testing : FRDM-KL25Z * * (C) Wim Beaumont Universiteit Antwerpen 2016, 2017 * */ class AT30TSE75x : public virtual getVersion { uint8_t buffer[4]; int Taddr, Eaddr; // base address for temperature and eeprom int Esize; void set_LimitRegister(int &error ,uint8_t reg ,float temperature, int Nonvolatile); float get_LimitRegister(int &error ,uint8_t reg , int Nonvolatile); void CopyRegisters( int &error , uint8_t reg); float convert_temperature( uint16_t datain); uint16_t set_temperature(float temperature ); int initstatus; protected: struct configreg { bool oneshot; uint8_t resolution; uint8_t faultTolQueue; bool alertpol; bool alarmMode; bool shutdownMode; bool NVregBusy; bool RegisterLockDown; bool RegisterLock; }; struct configreg CregNV, Creg; /** pointer to the I2C interface driver. */ I2CInterface* _i2c; public: enum { active_mode=0, disabled_mode=1 } shutdownmodes; enum { comparator_mode=0 , interrupt_mode=1 } alarmthermostatmodes; AT30TSE75x (I2CInterface* i2cinterface, int device_address_bits, int eepromsize=2); int getInitStatus(void) { return initstatus;} int getTaddr(){ return Taddr;}; int getEaddr(){ return Eaddr;}; float get_temperature(int &error); // write the status of the configreg structure to the register ( NV or volatile ) r // @error , report error I2C error or 43 in case the register is locked permanent and writing to nonvolatile register // error is 44 when register lock bit is active (in the structure) no update is done // @param Nonevolatile , write to Nonvolatile register if 1 ( so no effect ) // write to volatile config register so effect void set_config( int &error, int Nonvolatile=0 ); uint16_t read_config(int &error, int Nonvolatile=0 ); // set the one_shot bit in the (Volatile) config register and force a temperture read during shutdown mode // it reads first the config register and then set the bit and writes the config register // @return 0 void activate_oneshot(int &error ); // reads the resolution bits from the sconfig structure // @param Nonvolatile if 1 read from the Nonvolatile register // @param update if 1 reads first the register and fills the structure // @param error is 0 if success else error ( I2C error in case update =1) // @return the resolution bits int get_resolution(int &error, int Nonvolatile=0, bool update=0 ); int get_FaultTollerantQueue(int &error, int Nonvolatile=0, bool update=0 ); int get_AlertPinPolarity(int &error, int Nonvolatile=0, bool update=0 ); int get_AlarmThermostateMode(int &error, int Nonvolatile=0, bool update=0 ); int get_ShutdownMode(int &error, int Nonvolatile=0, bool update=0 ); // reads the resolution bits from the sconfig structure // @param Nonvolatile has to be 1 , in case of 0 no read is done and error is set to none zero // @param update if 1 reads first the register and fills the structure // @param error is 0 if success else error ( I2C error in case update =1) // @return the Register lock status int get_RegisterLock (int &error, int Nonvolatile=1, bool update=0 ); int get_RegisterLockdown (int &error, int Nonvolatile=1, bool update=0 ); // reads the config register updates the reg structure and reports the Nonvolatile busy bit int get_NonevolatileBussy(int &error); // reads the resolution bits from the sconfig structure // @resolution to be set can be either bit value 0 .. 3 or 9,10, 11, 12 for bit resolution // @param Nonvolatile if 1 set the Nonvolatile register // @param write if 0 only the structure is updated and no write to the config register // @param update if 1 reads first the register and fills the structure // @param error is 0 if success else error ( I2C error in case update =1) void set_resolution(int resolution , int &error, int Nonvolatile=0,bool write=0, bool update=0 ); void set_FaultTollerantQueue(int ftq, int &error, int Nonvolatile=0, bool write=0, bool update=0 ); void set_FaultTollerantQueue(char nrfaults, int &error, int Nonvolatile=0,bool write=0, bool update=0 ); void set_AlertPinPolarity(int pol, int &error, int Nonvolatile=0,bool write=0, bool update=0 ); //void set_AlarmThermostateMode(AT30TSE75x::alarmthermostatmodes mode , int &error, int Nonvolatile=0, bool update=0 ){ // set_AlarmThermostateMode((int) mode , error, Nonvolatile, update=0 );} void set_AlarmThermostateMode(int mode , int &error, int Nonvolatile=0, bool write=0,bool update=0 ); //void set_ShutdownMode(AT30TSE75x::shutdownmodes mode , int &error, int Nonvolatile=0, bool update=0 ){ // set_ShutdownMode((int) mode , error, Nonvolatile, bool ) ;} void set_ShutdownMode(int mode , int &error, int Nonvolatile=0,bool write=0, bool update=0 ); // set the register loc bit reads nonvolitaile config register and update the structure CregNV // @param lock locks status and limits registers ( None Volitaile and volitaile) if set to 1 or unlock ( lock=0) // @param error is 0 if success else error ( I2C error in case update =1) void set_RegisterLock (int &error, int lock ); // set the register loc bit reads nonvolitaile config register and update the structure CregNV // @param error reports an I2C error or wrong condition. Has to be 123 when called; // use this with caution // error will be 35 if #define RegisterLocDownEnable 0 in the code file // error will be 36 if called with error an other value then 123 // most likely this function is not tested. void set_RegisterLockdown (int &error, int lockpermanent ); // limit registers // set the low limit temperature register //@param error reports I2C error , in case the lock bit is set it error will 44 an no attempt is done to write // if Nonvolatile=1 and the permanentlock bit is set error will be 43 //@param temperature the temperature to be set in the register //@param Nonvolatile set the Nonvolataile register if set to none zero void set_TlowLimitRegister(int &error , float temperture, int Nonvolatile=0) ; void set_THighLimitRegister(int &error , float temperture, int Nonvolatile=0) ; float get_THighLimitRegister(int &error , float temperture, int Nonvolatile=0) ; float get_TLowLimitRegister(int &error , float temperture, int Nonvolatile=0) ; // copies the Volatile registers to the NoneVolataile registers // reads the volataile config register to check the NoneVolataile register status // if bussy waits for 100ms and tries again ( max 300ms wait) // @param error returns the I2C error , // returns 22 in case register stays busy // returns 43 if lock bit is set // returns 44 if lockdown bit is set void CopyVolatile2NoneVolatileRegisters( int &error); void CopyNonVolatile2VolatileRegisters( int &error) ; //eeprom // max lenght =16 for 1 page. If word =0 int read_eeprompage(char *data, uint8_t length, uint8_t word_addr, uint8_t page); int write_eeprompage(char *data, uint8_t length, uint8_t word_addr, uint8_t page); // read a single byte from ee prom int read_eeprombyte(char &data, uint8_t word_addr, uint8_t page); int write_eeprombyte(char data, uint8_t word_addr, uint8_t page); // set ee-prom in read only mode special voltage on A0 is needed and A1 and A2 shoud be low. int protect_eeprom(void); // set ee-prom in read only mode special voltage on A0 and A1 should be high , A2 should be low int unprotect_eeprom(void); // returns I2C err ( NACK) in case protected , else ACK ( no error =0) int get_eeprom_protec(void); }; #endif