Diff: Components/Interfaces/PLCOutput_class.h

Revision:

0:b66a560b6618

diff -r 000000000000 -r b66a560b6618 Components/Interfaces/PLCOutput_class.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/Interfaces/PLCOutput_class.h	Fri Feb 19 10:56:30 2016 +0000
@@ -0,0 +1,118 @@
+/**
+ ******************************************************************************
+ * @file    PLCOutput_class.h
+ * @author  AST/CL
+ * @version V1.0.0
+ * @date    Feb 4th, 2016
+ * @brief   This file contains the abstract class describing the interface of a
+ *          PLC output component.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Define to prevent from recursive inclusion --------------------------------*/
+
+#ifndef __PLCOUTPUT_CLASS_H
+#define __PLCOUTPUT_CLASS_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include <Component_class.h>
+
+
+/* Classes  ------------------------------------------------------------------*/
+
+/** An abstract class for PLCOutut component.
+ */
+class PLCOutput : public Component
+{
+public:
+
+    /**
+     * @brief   Set output channels state
+     * @param   Output channel data
+     * @retval  None
+     */
+    virtual void SetChannels(uint8_t Out_array) = 0;
+
+    /**
+     * @brief   Get output fault status
+     * @param   None
+     * @retval  Output channel fault data
+     */
+    virtual uint8_t ManageFault(void) = 0;
+
+    /**
+     * @brief   Get DC-DC status of the output channels component
+     * @param   None
+     * @retval  Feedback status, 1 if OK else 0
+     */
+     virtual uint8_t CheckDCDCStatus(void) = 0;
+
+    /**
+     * @brief   Get temperature warning status
+     * @param   None
+     * @retval  Temperature warning status, 1 if over temperature
+     */
+     virtual uint8_t TemperatureWarning(void) = 0;
+
+    /**
+     * @brief   Get parity check status
+     * @param   None
+     * @retval  Parity check flag
+     */
+     virtual uint8_t CheckParity(void) = 0;
+
+    /**
+     * @brief   Get power supply status
+     * @param   None
+     * @retval  Power good bit, 1 in case of power good
+     */
+     virtual uint8_t CheckPowerGood(void) = 0;
+
+    /**
+     * @brief   Get parity bits for input data
+     * @param   None
+     * @retval  Parity bits
+     */
+     virtual uint8_t CheckCommError(void) = 0;
+
+    /**
+     * @brief   Set output for output channels component
+     * @param   TX buffer
+     * @retval  None
+     */
+     virtual void Ssrelay_SetOutput(uint8_t *outputArray) = 0;
+};
+
+#endif /* __PLCOUTPUT_CLASS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/