How to measure water in a reservoir
Dependencies: Cayenne-MQTT-mbed Cayenne-LPP
Diff: inc/lora_radio_helper.h
- Revision:
- 0:7bfeb237e600
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/inc/lora_radio_helper.h Fri Mar 08 11:34:56 2019 +0000 @@ -0,0 +1,76 @@ +/** + * Copyright (c) 2017, Arm Limited and affiliates. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "lorawan/LoRaRadio.h" + +#ifndef APP_LORA_RADIO_HELPER_H_ +#define APP_LORA_RADIO_HELPER_H_ + +#include "SX1272_LoRaRadio.h" +#include "SX1276_LoRaRadio.h" + +#define SX1272 0xFF +#define SX1276 0xEE + +#if (MBED_CONF_APP_LORA_RADIO == SX1272) + + SX1272_LoRaRadio radio(MBED_CONF_APP_LORA_SPI_MOSI, + MBED_CONF_APP_LORA_SPI_MISO, + MBED_CONF_APP_LORA_SPI_SCLK, + MBED_CONF_APP_LORA_CS, + MBED_CONF_APP_LORA_RESET, + MBED_CONF_APP_LORA_DIO0, + MBED_CONF_APP_LORA_DIO1, + MBED_CONF_APP_LORA_DIO2, + MBED_CONF_APP_LORA_DIO3, + MBED_CONF_APP_LORA_DIO4, + MBED_CONF_APP_LORA_DIO5, + MBED_CONF_APP_LORA_RF_SWITCH_CTL1, + MBED_CONF_APP_LORA_RF_SWITCH_CTL2, + MBED_CONF_APP_LORA_TXCTL, + MBED_CONF_APP_LORA_RXCTL, + MBED_CONF_APP_LORA_ANT_SWITCH, + MBED_CONF_APP_LORA_PWR_AMP_CTL, + MBED_CONF_APP_LORA_TCXO); + +#elif (MBED_CONF_APP_LORA_RADIO == SX1276) + + SX1276_LoRaRadio radio(MBED_CONF_APP_LORA_SPI_MOSI, + MBED_CONF_APP_LORA_SPI_MISO, + MBED_CONF_APP_LORA_SPI_SCLK, + MBED_CONF_APP_LORA_CS, + MBED_CONF_APP_LORA_RESET, + MBED_CONF_APP_LORA_DIO0, + MBED_CONF_APP_LORA_DIO1, + MBED_CONF_APP_LORA_DIO2, + MBED_CONF_APP_LORA_DIO3, + MBED_CONF_APP_LORA_DIO4, + MBED_CONF_APP_LORA_DIO5, + MBED_CONF_APP_LORA_RF_SWITCH_CTL1, + MBED_CONF_APP_LORA_RF_SWITCH_CTL2, + MBED_CONF_APP_LORA_TXCTL, + MBED_CONF_APP_LORA_RXCTL, + MBED_CONF_APP_LORA_ANT_SWITCH, + MBED_CONF_APP_LORA_PWR_AMP_CTL, + MBED_CONF_APP_LORA_TCXO); + +#else + #error "Unknown LoRa radio specified (SX1272,SX1276 are valid)" +#endif + + +#endif /* APP_LORA_RADIO_HELPER_H_ */