File content as of revision 0:cb63da12fdcc:

/*********************************************************************
This is a library for our Monochrome OLEDs based on SSD1306 drivers
 
  Pick one up today in the adafruit shop!
  ------> http://www.adafruit.com/category/63_98
 
These displays use SPI to communicate, 4 or 5 pins are required to  
interface
 
Adafruit invests time and resources providing this open source code, 
please support Adafruit and open-source hardware by purchasing 
products from Adafruit!
 
Written by Limor Fried/Ladyada  for Adafruit Industries.  
BSD license, check license.txt for more information
All text above, and the splash screen must be included in any redistribution
*********************************************************************/
 
/*
 *  Modified by Neal Horman 7/14/2012 for use in mbed
 */
 
#ifndef _ADAFRUIT_SSD1306_H_
#define _ADAFRUIT_SSD1306_H_
 
#include "mbed.h"
#include "Adafruit_GFX.h"
 
#include <vector>
#include <algorithm>
 
#define SSD1306_EXTERNALVCC 0x1
#define SSD1306_SWITCHCAPVCC 0x2
 
/** The pure base class for the SSD1306 display driver.
 *
 * You should derive from this for a new transport interface type,
 * such as the SPI and I2C drivers.
 */
class Adafruit_SSD1306 : public Adafruit_GFX
{
public:
    Adafruit_SSD1306(PinName RST, uint8_t rawHeight = 32, uint8_t rawWidth = 128, bool _flipVertical=false)
        : Adafruit_GFX(rawWidth,rawHeight)
        , rst(RST,false)
        , flipVertical(_flipVertical)
    {
        buffer.resize(rawHeight * rawWidth / 8);
    };
 
    void begin(uint8_t switchvcc = SSD1306_SWITCHCAPVCC);
    
    // These must be implemented in the derived transport driver
    virtual void command(uint8_t c) = 0;
    virtual void data(uint8_t c) = 0;
    virtual void drawPixel(int16_t x, int16_t y, uint16_t color);
 
    /// Clear the display buffer    
    void clearDisplay(void);
    virtual void invertDisplay(bool i);
 
    /// Cause the display to be updated with the buffer content.
    void display();
    /// Fill the buffer with the AdaFruit splash screen.
    virtual void splash();
    
protected:
    virtual void sendDisplayBuffer() = 0;
    DigitalOut rst;
    bool flipVertical;
 
    // the memory buffer for the LCD
    std::vector<uint8_t> buffer;
};
 
 
/** This is the SPI SSD1306 display driver transport class
 *
 */
class Adafruit_SSD1306_Spi : public Adafruit_SSD1306
{
public:
    /** Create a SSD1306 SPI transport display driver instance with the specified DC, RST, and CS pins, as well as the display dimentions
     *
     * Required parameters
     * @param spi - a reference to an initialized SPI object
     * @param DC (Data/Command) pin name
     * @param RST (Reset) pin name
     * @param CS (Chip Select) pin name
     *
     * Optional parameters
     * @param rawHeight - the vertical number of pixels for the display, defaults to 32
     * @param rawWidth - the horizonal number of pixels for the display, defaults to 128
     */
    Adafruit_SSD1306_Spi(SPI &spi, PinName DC, PinName RST, PinName CS, uint8_t rawHieght = 32, uint8_t rawWidth = 128, bool flipVertical = false)
        : Adafruit_SSD1306(RST, rawHieght, rawWidth, flipVertical)
        , cs(CS,true)
        , dc(DC,false)
        , mspi(spi)
        {
            begin();
            splash();
            display();
        };
 
    virtual void command(uint8_t c)
    {
        cs = 1;
        dc = 0;
        cs = 0;
        mspi.write(c);
        cs = 1;
    };
 
    virtual void data(uint8_t c)
    {
        cs = 1;
        dc = 1;
        cs = 0;
        mspi.write(c);
        cs = 1;
    };
 
protected:
    virtual void sendDisplayBuffer()
    {
        cs = 1;
        dc = 1;
        cs = 0;
 
        for(uint16_t i=0, q=buffer.size(); i<q; i++)
            mspi.write(buffer[i]);
 
        if(height() == 32)
        {
            for(uint16_t i=0, q=buffer.size(); i<q; i++)
                mspi.write(0);
        }
 
        cs = 1;
    };
 
    DigitalOut cs, dc;
    SPI &mspi;
};
 
/** This is the I2C SSD1306 display driver transport class
 *
 */
class Adafruit_SSD1306_I2c : public Adafruit_SSD1306
{
public:
    #define SSD_I2C_ADDRESS     0x78
    /** Create a SSD1306 I2C transport display driver instance with the specified RST pin name, the I2C address, as well as the display dimensions
     *
     * Required parameters
     * @param i2c - A reference to an initialized I2C object
     * @param RST - The Reset pin name
     *
     * Optional parameters
     * @param i2cAddress - The i2c address of the display
     * @param rawHeight - The vertical number of pixels for the display, defaults to 32
     * @param rawWidth - The horizonal number of pixels for the display, defaults to 128
     */
    Adafruit_SSD1306_I2c(I2C &i2c, PinName RST, uint8_t i2cAddress = SSD_I2C_ADDRESS, uint8_t rawHeight = 32, uint8_t rawWidth = 128, bool flipVertical = false)
        : Adafruit_SSD1306(RST, rawHeight, rawWidth, flipVertical)
        , mi2c(i2c)
        , mi2cAddress(i2cAddress)
        {
            begin();
            splash();
            display();
        };
 
    virtual void command(uint8_t c)
    {
        char buff[2];
        buff[0] = 0; // Command Mode
        buff[1] = c;
        mi2c.write(mi2cAddress, buff, sizeof(buff));
    }
 
    virtual void data(uint8_t c)
    {
        char buff[2];
        buff[0] = 0x40; // Data Mode
        buff[1] = c;
        mi2c.write(mi2cAddress, buff, sizeof(buff));
    };
 
protected:
    virtual void sendDisplayBuffer()
    {
        char buff[17];
        buff[0] = 0x40; // Data Mode
 
        // send display buffer in 16 byte chunks
        for(uint16_t i=0, q=buffer.size(); i<q; i+=16 ) 
        {   uint8_t x ;
 
            // TODO - this will segfault if buffer.size() % 16 != 0
            for(x=1; x<sizeof(buff); x++) 
                buff[x] = buffer[i+x-1];
            mi2c.write(mi2cAddress, buff, sizeof(buff));
        }
    };
 
    I2C &mi2c;
    uint8_t mi2cAddress;
};
 
#endif