First Last
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/hal/TARGET_NXP/TARGET_LPC43XX/PinNames.h
- Revision:
- 20:4263a77256ae
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/PinNames.h Tue Sep 10 15:14:19 2013 +0300
@@ -0,0 +1,566 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+#define NO_GPIO 15
+
+// On the LPC43xx the MCU pin name and the GPIO pin name are not the same.
+// Encode SCU and GPIO offsets as a pin identifier
+#define MBED_PIN(group, num, port, pin) ((SCU_OFF(group,num) << 16) + GPIO_OFF(port,pin))
+
+// Decode pin identifier into register, port and pin values
+#define MBED_SCU_REG(MBED_PIN) (LPC_SCU_BASE + (MBED_PIN >> 16))
+#define MBED_GPIO_REG(MBED_PIN) (LPC_GPIO_PORT_BASE + 0x2000 + ((MBED_PIN >> (PORT_SHIFT - 2)) & 0x0000003C))
+#define MBED_GPIO_PORT(MBED_PIN) ((MBED_PIN >> PORT_SHIFT) & 0x0000000F)
+#define MBED_GPIO_PIN(MBED_PIN) (MBED_PIN & 0x0000001F)
+
+typedef enum {
+ // LPC43xx Pin Names
+ // All pins defined. Package determines which are available.
+ // LBGA256 TFBGA180 TFBGA100 LQFP208 LQFP144
+ // GPIO0 [15:0] [15:0] [15:6] [15:0] [15:0]
+ // [4:0]
+ // GPIO1 [15:0] [15:0] [15:0] [15:0] [15:0]
+ // GPIO2 [15:0] [15:0] [15:0] [15:0]
+ // GPIO3 [15:0] [15:0] [7] [15:0] [15:0]
+ // [5:3]
+ // [1:0]
+ // GPIO4 [15:0] [15:0] [15:0] [11]
+ // GPIO5 [26:0] [26:0] [11:0] [25:0] [18]
+ // [16:0]
+ // GPIO6 [30:0] [30:28] [30:20]
+ // [26:25] [5:0]
+ // GPIO7 [25:0] [4:0] [25:23]
+ // [21:17]
+ // --- --- --- --- ---
+ // Total 164 117 49 131 83
+
+ // Groups 0x00 - 0x0F : Digital pins
+ // * Digital pins support up to 8 functions
+ // Use func=0 for GPIO0-GPIO4, func=4 for GPIO5-GPIO7
+ // * High-drive pins default to 4 mA but can support 8, 14, 20 mA
+ P0_0 = MBED_PIN(0x00, 0, 0, 0), // GPIO0[0]
+ P0_1 = MBED_PIN(0x00, 1, 0, 1), // GPIO0[1]
+
+ P1_0 = MBED_PIN(0x01, 0, 0, 4), // GPIO0[4]
+ P1_1 = MBED_PIN(0x01, 1, 0, 8), // GPIO0[8]
+ P1_2 = MBED_PIN(0x01, 2, 0, 9), // GPIO0[9]
+ P1_3 = MBED_PIN(0x01, 3, 0, 10), // GPIO0[10]
+ P1_4 = MBED_PIN(0x01, 4, 0, 11), // GPIO0[11]
+ P1_5 = MBED_PIN(0x01, 5, 1, 8), // GPIO1[8]
+ P1_6 = MBED_PIN(0x01, 6, 1, 9), // GPIO1[9]
+ P1_7 = MBED_PIN(0x01, 7, 1, 0), // GPIO1[0]
+ P1_8 = MBED_PIN(0x01, 8, 1, 1), // GPIO1[1]
+ P1_9 = MBED_PIN(0x01, 9, 1, 2), // GPIO1[2]
+ P1_10 = MBED_PIN(0x01, 10, 1, 3), // GPIO1[3]
+ P1_11 = MBED_PIN(0x01, 11, 1, 4), // GPIO1[4]
+ P1_12 = MBED_PIN(0x01, 12, 1, 5), // GPIO1[5]
+ P1_13 = MBED_PIN(0x01, 13, 1, 6), // GPIO1[6]
+ P1_14 = MBED_PIN(0x01, 14, 1, 7), // GPIO1[7]
+ P1_15 = MBED_PIN(0x01, 15, 0, 2), // GPIO0[2]
+ P1_16 = MBED_PIN(0x01, 16, 0, 3), // GPIO0[3]
+ P1_17 = MBED_PIN(0x01, 17, 0, 12), // GPIO0[12] high-drive
+ P1_18 = MBED_PIN(0x01, 18, 0, 13), // GPIO0[13]
+ P1_19 = MBED_PIN(0x01, 19, NO_GPIO, 0),
+ P1_20 = MBED_PIN(0x01, 20, 0, 15), // GPIO0[15]
+
+ P2_0 = MBED_PIN(0x02, 0, 5, 0), // GPIO5[0]
+ P2_1 = MBED_PIN(0x02, 1, 5, 1), // GPIO5[1]
+ P2_2 = MBED_PIN(0x02, 2, 5, 2), // GPIO5[2]
+ P2_3 = MBED_PIN(0x02, 3, 5, 3), // GPIO5[3] high-drive
+ P2_4 = MBED_PIN(0x02, 4, 5, 4), // GPIO5[4] high-drive
+ P2_5 = MBED_PIN(0x02, 5, 5, 5), // GPIO5[5] high-drive
+ P2_6 = MBED_PIN(0x02, 6, 5, 6), // GPIO5[6]
+ P2_7 = MBED_PIN(0x02, 7, 0, 7), // GPIO0[7]
+ P2_8 = MBED_PIN(0x02, 8, 5, 7), // GPIO5[7]
+ P2_9 = MBED_PIN(0x02, 9, 1, 10), // GPIO1[10]
+ P2_10 = MBED_PIN(0x02, 10, 0, 14), // GPIO0[14]
+ P2_11 = MBED_PIN(0x02, 11, 1, 11), // GPIO1[11]
+ P2_12 = MBED_PIN(0x02, 12, 1, 12), // GPIO1[12]
+ P2_13 = MBED_PIN(0x02, 13, 1, 13), // GPIO1[13]
+
+ P3_0 = MBED_PIN(0x03, 0, NO_GPIO, 0),
+ P3_1 = MBED_PIN(0x03, 1, 5, 8), // GPIO5[8]
+ P3_2 = MBED_PIN(0x03, 2, 5, 9), // GPIO5[9]
+ P3_3 = MBED_PIN(0x03, 3, NO_GPIO, 0),
+ P3_4 = MBED_PIN(0x03, 4, 1, 14), // GPIO1[14]
+ P3_5 = MBED_PIN(0x03, 5, 1, 15), // GPIO1[15]
+ P3_6 = MBED_PIN(0x03, 6, 0, 6), // GPIO0[6]
+ P3_7 = MBED_PIN(0x03, 7, 5, 10), // GPIO5[10]
+ P3_8 = MBED_PIN(0x03, 8, 5, 11), // GPIO5[11]
+
+ P4_0 = MBED_PIN(0x04, 0, 2, 0), // GPIO2[0]
+ P4_1 = MBED_PIN(0x04, 1, 2, 1), // GPIO2[1]
+ P4_2 = MBED_PIN(0x04, 2, 2, 2), // GPIO2[2]
+ P4_3 = MBED_PIN(0x04, 3, 2, 3), // GPIO2[3]
+ P4_4 = MBED_PIN(0x04, 4, 2, 4), // GPIO2[4]
+ P4_5 = MBED_PIN(0x04, 5, 2, 5), // GPIO2[5]
+ P4_6 = MBED_PIN(0x04, 6, 2, 6), // GPIO2[6]
+ P4_7 = MBED_PIN(0x04, 7, NO_GPIO, 0),
+ P4_8 = MBED_PIN(0x04, 8, 5, 12), // GPIO5[12]
+ P4_9 = MBED_PIN(0x04, 9, 5, 13), // GPIO5[13]
+ P4_10 = MBED_PIN(0x04, 10, 5, 14), // GPIO5[14]
+
+ P5_0 = MBED_PIN(0x05, 0, 2, 9), // GPIO2[9]
+ P5_1 = MBED_PIN(0x05, 1, 2, 10), // GPIO2[10]
+ P5_2 = MBED_PIN(0x05, 2, 2, 11), // GPIO2[11]
+ P5_3 = MBED_PIN(0x05, 3, 2, 12), // GPIO2[12]
+ P5_4 = MBED_PIN(0x05, 4, 2, 13), // GPIO2[13]
+ P5_5 = MBED_PIN(0x05, 5, 2, 14), // GPIO2[14]
+ P5_6 = MBED_PIN(0x05, 6, 2, 15), // GPIO2[15]
+ P5_7 = MBED_PIN(0x05, 7, 2, 7), // GPIO2[7]
+
+ P6_0 = MBED_PIN(0x06, 0, NO_GPIO, 0),
+ P6_1 = MBED_PIN(0x06, 1, 3, 0), // GPIO3[0]
+ P6_2 = MBED_PIN(0x06, 2, 3, 1), // GPIO3[1]
+ P6_3 = MBED_PIN(0x06, 3, 3, 2), // GPIO3[2]
+ P6_4 = MBED_PIN(0x06, 4, 3, 3), // GPIO3[3]
+ P6_5 = MBED_PIN(0x06, 5, 3, 4), // GPIO3[4]
+ P6_6 = MBED_PIN(0x06, 6, 0, 5), // GPIO0[5]
+ P6_7 = MBED_PIN(0x06, 7, 5, 15), // GPIO5[15]
+ P6_8 = MBED_PIN(0x06, 8, 5, 16), // GPIO5[16]
+ P6_9 = MBED_PIN(0x06, 9, 3, 5), // GPIO3[5]
+ P6_10 = MBED_PIN(0x06, 10, 3, 6), // GPIO3[6]
+ P6_11 = MBED_PIN(0x06, 11, 3, 7), // GPIO3[7]
+ P6_12 = MBED_PIN(0x06, 12, 2, 8), // GPIO2[8]
+
+ P7_0 = MBED_PIN(0x07, 0, 3, 8), // GPIO3[8]
+ P7_1 = MBED_PIN(0x07, 1, 3, 9), // GPIO3[9]
+ P7_2 = MBED_PIN(0x07, 2, 3, 10), // GPIO3[10]
+ P7_3 = MBED_PIN(0x07, 3, 3, 11), // GPIO3[11]
+ P7_4 = MBED_PIN(0x07, 4, 3, 12), // GPIO3[12]
+ P7_5 = MBED_PIN(0x07, 5, 3, 13), // GPIO3[13]
+ P7_6 = MBED_PIN(0x07, 6, 3, 14), // GPIO3[14]
+ P7_7 = MBED_PIN(0x07, 7, 3, 15), // GPIO3[15]
+
+ P8_0 = MBED_PIN(0x08, 8, 4, 0), // GPIO4[0] high-drive
+ P8_1 = MBED_PIN(0x09, 0, 4, 1), // GPIO4[1] high-drive
+ P8_2 = MBED_PIN(0x09, 1, 4, 2), // GPIO4[2] high-drive
+ P8_3 = MBED_PIN(0x09, 2, 4, 3), // GPIO4[3]
+ P8_4 = MBED_PIN(0x08, 4, 4, 4), // GPIO4[4]
+ P8_5 = MBED_PIN(0x08, 5, 4, 5), // GPIO4[5]
+ P8_6 = MBED_PIN(0x08, 6, 4, 6), // GPIO4[6]
+ P8_7 = MBED_PIN(0x08, 7, 4, 7), // GPIO4[7]
+ P8_8 = MBED_PIN(0x08, 8, NO_GPIO, 0),
+
+ P9_0 = MBED_PIN(0x09, 0, 4, 12), // GPIO4[12]
+ P9_1 = MBED_PIN(0x09, 1, 4, 13), // GPIO4[13]
+ P9_2 = MBED_PIN(0x09, 2, 4, 14), // GPIO4[14]
+ P9_3 = MBED_PIN(0x09, 3, 4, 15), // GPIO4[15]
+ P9_4 = MBED_PIN(0x09, 4, 5, 17), // GPIO5[17]
+ P9_5 = MBED_PIN(0x09, 5, 5, 18), // GPIO5[18]
+ P9_6 = MBED_PIN(0x09, 6, 4, 11), // GPIO4[11]
+
+ PA_0 = MBED_PIN(0x0A, 0, NO_GPIO, 0),
+ PA_1 = MBED_PIN(0x0A, 1, 4, 8), // GPIO4[8] high-drive
+ PA_2 = MBED_PIN(0x0A, 2, 4, 9), // GPIO4[9] high-drive
+ PA_3 = MBED_PIN(0x0A, 3, 4, 10), // GPIO4[10] high-drive
+ PA_4 = MBED_PIN(0x0A, 4, 5, 19), // GPIO5[19]
+
+ PB_0 = MBED_PIN(0x0B, 0, 5, 20), // GPIO5[20]
+ PB_1 = MBED_PIN(0x0B, 1, 5, 21), // GPIO5[21]
+ PB_2 = MBED_PIN(0x0B, 2, 5, 22), // GPIO5[22]
+ PB_3 = MBED_PIN(0x0B, 3, 5, 23), // GPIO5[23]
+ PB_4 = MBED_PIN(0x0B, 4, 5, 24), // GPIO5[24]
+ PB_5 = MBED_PIN(0x0B, 5, 5, 25), // GPIO5[25]
+ PB_6 = MBED_PIN(0x0B, 6, 5, 26), // GPIO5[26]
+
+ PC_0 = MBED_PIN(0x0C, 0, NO_GPIO, 0),
+ PC_1 = MBED_PIN(0x0C, 1, 6, 0), // GPIO6[0]
+ PC_2 = MBED_PIN(0x0C, 2, 6, 1), // GPIO6[1]
+ PC_3 = MBED_PIN(0x0C, 3, 6, 2), // GPIO6[2]
+ PC_4 = MBED_PIN(0x0C, 4, 6, 3), // GPIO6[3]
+ PC_5 = MBED_PIN(0x0C, 5, 6, 4), // GPIO6[4]
+ PC_6 = MBED_PIN(0x0C, 6, 6, 5), // GPIO6[5]
+ PC_7 = MBED_PIN(0x0C, 7, 6, 6), // GPIO6[6]
+ PC_8 = MBED_PIN(0x0C, 8, 6, 7), // GPIO6[7]
+ PC_9 = MBED_PIN(0x0C, 9, 6, 8), // GPIO6[8]
+ PC_10 = MBED_PIN(0x0C, 10, 6, 9), // GPIO6[9]
+ PC_11 = MBED_PIN(0x0C, 11, 6, 10), // GPIO6[10]
+ PC_12 = MBED_PIN(0x0C, 12, 6, 11), // GPIO6[11]
+ PC_13 = MBED_PIN(0x0C, 13, 6, 12), // GPIO6[12]
+ PC_14 = MBED_PIN(0x0C, 14, 6, 13), // GPIO6[13]
+
+ PD_0 = MBED_PIN(0x0D, 0, 6, 14), // GPIO6[14]
+ PD_1 = MBED_PIN(0x0D, 1, 6, 15), // GPIO6[15]
+ PD_2 = MBED_PIN(0x0D, 2, 6, 16), // GPIO6[16]
+ PD_3 = MBED_PIN(0x0D, 3, 6, 17), // GPIO6[17]
+ PD_4 = MBED_PIN(0x0D, 4, 6, 18), // GPIO6[18]
+ PD_5 = MBED_PIN(0x0D, 5, 6, 19), // GPIO6[19]
+ PD_6 = MBED_PIN(0x0D, 6, 6, 20), // GPIO6[20]
+ PD_7 = MBED_PIN(0x0D, 7, 6, 21), // GPIO6[21]
+ PD_8 = MBED_PIN(0x0D, 8, 6, 22), // GPIO6[22]
+ PD_9 = MBED_PIN(0x0D, 9, 6, 23), // GPIO6[23]
+ PD_10 = MBED_PIN(0x0D, 10, 6, 24), // GPIO6[24]
+ PD_11 = MBED_PIN(0x0D, 11, 6, 25), // GPIO6[25]
+ PD_12 = MBED_PIN(0x0D, 12, 6, 26), // GPIO6[26]
+ PD_13 = MBED_PIN(0x0D, 13, 6, 27), // GPIO6[27]
+ PD_14 = MBED_PIN(0x0D, 14, 6, 28), // GPIO6[28]
+ PD_15 = MBED_PIN(0x0D, 15, 6, 29), // GPIO6[29]
+ PD_16 = MBED_PIN(0x0D, 16, 6, 30), // GPIO6[30]
+
+ PE_0 = MBED_PIN(0x0E, 0, 7, 0), // GPIO7[0]
+ PE_1 = MBED_PIN(0x0E, 1, 7, 1), // GPIO7[1]
+ PE_2 = MBED_PIN(0x0E, 2, 7, 2), // GPIO7[2]
+ PE_3 = MBED_PIN(0x0E, 3, 7, 3), // GPIO7[3]
+ PE_4 = MBED_PIN(0x0E, 4, 7, 4), // GPIO7[4]
+ PE_5 = MBED_PIN(0x0E, 5, 7, 5), // GPIO7[5]
+ PE_6 = MBED_PIN(0x0E, 6, 7, 6), // GPIO7[6]
+ PE_7 = MBED_PIN(0x0E, 7, 7, 7), // GPIO7[7]
+ PE_8 = MBED_PIN(0x0E, 8, 7, 8), // GPIO7[8]
+ PE_9 = MBED_PIN(0x0E, 9, 7, 9), // GPIO7[9]
+ PE_10 = MBED_PIN(0x0E, 10, 7, 10), // GPIO7[10]
+ PE_11 = MBED_PIN(0x0E, 11, 7, 11), // GPIO7[11]
+ PE_12 = MBED_PIN(0x0E, 12, 7, 12), // GPIO7[12]
+ PE_13 = MBED_PIN(0x0E, 13, 7, 13), // GPIO7[13]
+ PE_14 = MBED_PIN(0x0E, 14, 7, 14), // GPIO7[14]
+ PE_15 = MBED_PIN(0x0E, 15, 7, 15), // GPIO7[15]
+
+ PF_0 = MBED_PIN(0x0F, 0, NO_GPIO, 0),
+ PF_1 = MBED_PIN(0x0F, 1, 7, 16), // GPIO7[16]
+ PF_2 = MBED_PIN(0x0F, 2, 7, 17), // GPIO7[17]
+ PF_3 = MBED_PIN(0x0F, 3, 7, 18), // GPIO7[18]
+ PF_4 = MBED_PIN(0x0F, 4, NO_GPIO, 0),
+ PF_5 = MBED_PIN(0x0F, 5, 7, 19), // GPIO7[19]
+ PF_6 = MBED_PIN(0x0F, 6, 7, 20), // GPIO7[20]
+ PF_7 = MBED_PIN(0x0F, 7, 7, 21), // GPIO7[21]
+ PF_8 = MBED_PIN(0x0F, 8, 7, 22), // GPIO7[22]
+ PF_9 = MBED_PIN(0x0F, 9, 7, 23), // GPIO7[23]
+ PF_10 = MBED_PIN(0x0F, 10, 7, 24), // GPIO7[24]
+ PF_11 = MBED_PIN(0x0F, 11, 7, 25), // GPIO7[25]
+
+ // GPIO pins from MCU pins
+ GPIO0_0 = P0_0,
+ GPIO0_1 = P0_1 ,
+ GPIO0_2 = P1_15,
+ GPIO0_3 = P1_16,
+ GPIO0_4 = P1_0,
+ GPIO0_5 = P6_6,
+ GPIO0_6 = P3_6,
+ GPIO0_7 = P2_7,
+ GPIO0_8 = P1_1,
+ GPIO0_9 = P1_2,
+ GPIO0_10 = P1_3,
+ GPIO0_11 = P1_4,
+ GPIO0_12 = P1_17,
+ GPIO0_13 = P1_18,
+ GPIO0_14 = P2_10,
+ GPIO0_15 = P1_20,
+
+ GPIO1_0 = P1_7,
+ GPIO1_1 = P1_8,
+ GPIO1_2 = P1_9,
+ GPIO1_3 = P1_10,
+ GPIO1_4 = P1_11,
+ GPIO1_5 = P1_12,
+ GPIO1_6 = P1_13,
+ GPIO1_7 = P1_14,
+ GPIO1_8 = P1_5,
+ GPIO1_9 = P1_6,
+ GPIO1_10 = P2_9,
+ GPIO1_11 = P2_11,
+ GPIO1_12 = P2_12,
+ GPIO1_13 = P2_13,
+ GPIO1_14 = P3_4,
+ GPIO1_15 = P3_5,
+
+ GPIO2_0 = P4_0,
+ GPIO2_1 = P4_1,
+ GPIO2_2 = P4_2,
+ GPIO2_3 = P4_3,
+ GPIO2_4 = P4_4,
+ GPIO2_5 = P4_5,
+ GPIO2_6 = P4_6,
+ GPIO2_7 = P5_7,
+ GPIO2_8 = P6_12,
+ GPIO2_9 = P5_0,
+ GPIO2_10 = P5_1,
+ GPIO2_11 = P5_2,
+ GPIO2_12 = P5_3,
+ GPIO2_13 = P5_4,
+ GPIO2_14 = P5_5,
+ GPIO2_15 = P5_6,
+
+ GPIO3_0 = P6_1,
+ GPIO3_1 = P6_2,
+ GPIO3_2 = P6_3,
+ GPIO3_3 = P6_4,
+ GPIO3_4 = P6_5,
+ GPIO3_5 = P6_9,
+ GPIO3_6 = P6_10,
+ GPIO3_7 = P6_11,
+ GPIO3_8 = P7_0,
+ GPIO3_9 = P7_1,
+ GPIO3_10 = P7_2,
+ GPIO3_11 = P7_3,
+ GPIO3_12 = P7_4,
+ GPIO3_13 = P7_5,
+ GPIO3_14 = P7_6,
+ GPIO3_15 = P7_7,
+
+ GPIO4_0 = P8_0,
+ GPIO4_1 = P8_1,
+ GPIO4_2 = P8_2,
+ GPIO4_3 = P8_3,
+ GPIO4_4 = P8_4,
+ GPIO4_5 = P8_5,
+ GPIO4_6 = P8_6,
+ GPIO4_7 = P8_7,
+ GPIO4_8 = PA_1,
+ GPIO4_9 = PA_2,
+ GPIO4_10 = PA_3,
+ GPIO4_11 = P9_6,
+ GPIO4_12 = P9_0,
+ GPIO4_13 = P9_1,
+ GPIO4_14 = P9_2,
+ GPIO4_15 = P9_3,
+
+ GPIO5_0 = P2_0,
+ GPIO5_1 = P2_1,
+ GPIO5_2 = P2_2,
+ GPIO5_3 = P2_3,
+ GPIO5_4 = P2_4,
+ GPIO5_5 = P2_5,
+ GPIO5_6 = P2_6,
+ GPIO5_7 = P2_8,
+ GPIO5_8 = P3_1,
+ GPIO5_9 = P3_2,
+ GPIO5_10 = P3_7,
+ GPIO5_11 = P3_8,
+ GPIO5_12 = P4_8,
+ GPIO5_13 = P4_9,
+ GPIO5_14 = P4_10,
+ GPIO5_15 = P6_7,
+ GPIO5_16 = P6_8,
+ GPIO5_17 = P9_4,
+ GPIO5_18 = P9_5,
+ GPIO5_19 = PA_4,
+ GPIO5_20 = PB_0,
+ GPIO5_21 = PB_1,
+ GPIO5_22 = PB_2,
+ GPIO5_23 = PB_3,
+ GPIO5_24 = PB_4,
+ GPIO5_25 = PB_5,
+ GPIO5_26 = PB_6,
+
+ GPIO6_0 = PC_1,
+ GPIO6_1 = PC_2,
+ GPIO6_2 = PC_3,
+ GPIO6_3 = PC_4,
+ GPIO6_4 = PC_5,
+ GPIO6_5 = PC_6,
+ GPIO6_6 = PC_7,
+ GPIO6_7 = PC_8,
+ GPIO6_8 = PC_9,
+ GPIO6_9 = PC_10,
+ GPIO6_10 = PC_11,
+ GPIO6_11 = PC_12,
+ GPIO6_12 = PC_13,
+ GPIO6_13 = PC_14,
+ GPIO6_14 = PD_0,
+ GPIO6_15 = PD_1,
+ GPIO6_16 = PD_2,
+ GPIO6_17 = PD_3,
+ GPIO6_18 = PD_4,
+ GPIO6_19 = PD_5,
+ GPIO6_20 = PD_6,
+ GPIO6_21 = PD_7,
+ GPIO6_22 = PD_8,
+ GPIO6_23 = PD_9,
+ GPIO6_24 = PD_10,
+ GPIO6_25 = PD_11,
+ GPIO6_26 = PD_12,
+ GPIO6_27 = PD_13,
+ GPIO6_28 = PD_14,
+ GPIO6_29 = PD_15,
+ GPIO6_30 = PD_16,
+
+ GPIO7_0 = PE_0,
+ GPIO7_1 = PE_1,
+ GPIO7_2 = PE_2,
+ GPIO7_3 = PE_3,
+ GPIO7_4 = PE_4,
+ GPIO7_5 = PE_5,
+ GPIO7_6 = PE_5,
+ GPIO7_7 = PE_7,
+ GPIO7_8 = PE_8,
+ GPIO7_9 = PE_9,
+ GPIO7_10 = PE_10,
+ GPIO7_11 = PE_11,
+ GPIO7_12 = PE_12,
+ GPIO7_13 = PE_13,
+ GPIO7_14 = PE_14,
+ GPIO7_15 = PE_15,
+ GPIO7_16 = PF_1,
+ GPIO7_17 = PF_2,
+ GPIO7_18 = PF_3,
+ GPIO7_19 = PF_5,
+ GPIO7_20 = PF_6,
+ GPIO7_21 = PF_7,
+ GPIO7_22 = PF_8,
+ GPIO7_23 = PF_9,
+ GPIO7_24 = PF_10,
+ GPIO7_25 = PF_11,
+
+ // Map mbed pin names to LPC43xx board signals
+
+ // Group 0x18 : CLKn pins
+ SFP_CLK0 = MBED_PIN(0x18, 0, 0, 0),
+ SFP_CLK1 = MBED_PIN(0x18, 1, 0, 0),
+ SFP_CLK2 = MBED_PIN(0x18, 2, 0, 0),
+ SFP_CLK3 = MBED_PIN(0x18, 3, 0, 0),
+
+ // Group 0x19 : USB1, I2C0, ADC0, ADC1
+ SFP_USB1 = MBED_PIN(0x19, 0, 0, 0),
+ SFP_I2C0 = MBED_PIN(0x19, 1, 0, 0),
+ SFP_AIO0 = MBED_PIN(0x19, 2, 0, 0), // ADC0 function select register
+ SFP_AIO1 = MBED_PIN(0x19, 3, 0, 0), // ADC1 function select register
+ SFP_AIO2 = MBED_PIN(0x19, 4, 0, 0), // Analog function select register
+
+ SFP_EMCD = MBED_PIN(0x1A, 0, 0, 0), // EMC clock delay register
+
+ SFP_INS0 = MBED_PIN(0x1C, 0, 0, 0), // Interrupt select for pin interrupts 0 to 3
+ SFP_INS1 = MBED_PIN(0x1C, 1, 0, 0), // Interrupt select for pin interrupts 4 to 7
+
+#define MBED_ADC_NUM(MBED_PIN) ((MBED_PIN >> 5) & 0x0000000F)
+#define MBED_ADC_CHAN(MBED_PIN) (MBED_PIN & 0x0000001F)
+
+ // Use pseudo-pin ID also for ADCs, although with special handling
+ SFP_ADC0_0 = MBED_PIN(0x19, 2, 0, 0), // ADC0_0
+ SFP_ADC0_1 = MBED_PIN(0x19, 2, 0, 1), // ADC0_1
+ SFP_ADC0_2 = MBED_PIN(0x19, 2, 0, 2), // ADC0_2
+ SFP_ADC0_3 = MBED_PIN(0x19, 2, 0, 3), // ADC0_3
+ SFP_ADC0_4 = MBED_PIN(0x19, 2, 0, 4), // ADC0_4
+ SFP_ADC0_5 = MBED_PIN(0x19, 2, 0, 5), // ADC0_5
+ SFP_ADC0_6 = MBED_PIN(0x19, 2, 0, 6), // ADC0_6
+
+ SFP_ADC1_0 = MBED_PIN(0x19, 3, 1, 0), // ADC1_0
+ SFP_ADC1_1 = MBED_PIN(0x19, 3, 1, 1), // ADC1_1
+ SFP_ADC1_2 = MBED_PIN(0x19, 3, 1, 2), // ADC1_2
+ SFP_ADC1_3 = MBED_PIN(0x19, 3, 1, 3), // ADC1_3
+ SFP_ADC1_4 = MBED_PIN(0x19, 3, 1, 4), // ADC1_4
+ SFP_ADC1_5 = MBED_PIN(0x19, 3, 1, 5), // ADC1_5
+ SFP_ADC1_6 = MBED_PIN(0x19, 3, 1, 6), // ADC1_6
+ SFP_ADC1_7 = MBED_PIN(0x19, 3, 1, 7), // ADC1_7
+
+ // ---------- Micromint Bambino 200 ----------
+ // LQFP144
+ // NOTE: Pins marked (*) only available on 200E
+ p5 = P1_2, // SPI0 mosi
+ p6 = P1_1, // SPI0 miso
+ p7 = P3_0, // SPI0 sck
+ p8 = P4_5,
+ p9 = P6_4, // Serial0 tx, I2C0 sda
+ p10 = P6_5, // Serial0 rx, I2C0 scl
+ p11 = P1_4, // SPI1 mosi (*)
+ p12 = P1_3, // SPI1 miso (*)
+ p13 = PF_4, // Serial1 tx, SPI1 sck (*)
+ p14 = P1_14, // Serial1 rx
+ p15 = P4_3, // ADC0
+ p16 = P4_1, // ADC1
+ p17 = P7_4, // ADC2
+ p18 = SFP_ADC0_0, // ADC3, DAC0
+ p19 = P7_5, // ADC4
+ p20 = P7_7, // ADC5
+ p21 = P4_0, // PWM0
+ p22 = P5_5, // PWM1
+ p23 = P5_7, // PWM2
+ p24 = P4_8, // PWM3
+ p25 = P4_9, // PWM4
+ p26 = P4_10, // PWM5
+ p27 = P2_4, // I2C1 scl, Serial2 rx
+ p28 = P2_3, // I2C1 sda, Serial2 tx
+ p29 = P3_2, // CAN0 td
+ p30 = P3_1, // CAN0 rx
+
+ // User interfaces: LEDs, buttons
+ LED_YELLOW = P6_11,
+ LED_GREEN = P2_5,
+ LED_RED = LED_YELLOW,
+ LED_BLUE = LED_GREEN,
+
+ LED1 = LED_YELLOW,
+ LED2 = LED_GREEN,
+ LED3 = LED_GREEN,
+ LED4 = LED_GREEN,
+
+ BTN1 = P2_7,
+
+ // Serial pins
+ UART0_TX = P6_4,
+ UART0_RX = P6_5,
+ UART1_TX = P5_6,
+ UART1_RX = P1_14,
+ UART2_TX = P2_10,
+ UART2_RX = P2_11,
+ UART3_TX = P2_3,
+ UART3_RX = P2_4,
+
+ // Analog pins
+ P_ADC0_0 = P4_3,
+ P_ADC0_1 = P4_1,
+ P_ADC1_0 = SFP_ADC0_0,
+ P_ADC0_4 = P7_4,
+ P_ADC0_3 = P7_5,
+ P_ADC1_6 = P7_7,
+
+ P_ADC0 = P_ADC0_0,
+ P_ADC1 = P_ADC0_1,
+ P_ADC2 = P_ADC1_0,
+ P_ADC3 = P_ADC0_4,
+ P_ADC4 = P_ADC0_3,
+ P_ADC5 = P_ADC1_6,
+
+ P_DAC0 = P4_4,
+
+ // USB pins
+ //P_USB0_TX = SFP_USB1,
+ //P_USB0_RX = SFP_USB1,
+
+ USBTX = UART0_TX,
+ USBRX = UART0_RX,
+ // ---------- End of Micromint Bambino 200 ----------
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullUp = 0,
+ PullDown = 3,
+ PullNone = 2,
+ Repeater = 1,
+ OpenDrain = 4
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif