Vergil Cola
Fork of my MQTTGateway
Diff: XbeeMonitor/XBeeLib/XBee802/XBee802.h
- Revision:
- 0:f1d3878b8dd9
diff -r 000000000000 -r f1d3878b8dd9 XbeeMonitor/XBeeLib/XBee802/XBee802.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/XbeeMonitor/XBeeLib/XBee802/XBee802.h Sat Apr 08 14:45:51 2017 +0000
@@ -0,0 +1,405 @@
+/**
+ * Copyright (c) 2015 Digi International Inc.,
+ * All rights not expressly granted are reserved.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
+ * =======================================================================
+ */
+
+#if !defined(__XBEE_802_H_)
+#define __XBEE_802_H_
+
+#include "FrameHandlers/FH_AtCmdResp.h"
+#include "FrameHandlers/FH_RxPacket802.h"
+#include "FrameHandlers/FH_IoDataSample802.h"
+#include "RemoteXBee/RemoteXBee.h"
+
+namespace XBeeLib {
+
+/** Class for XBee ZigBee modules, derived from XBee */
+class XBee802 : public XBee
+{
+ public:
+
+ /**
+ * IoLine for XBee802 Modules
+ */
+ enum IoLine {
+ DIO0_AD0 = 0, /**< DIO0_AD0 pin */
+ DIO1_AD1 = 1, /**< DIO1_AD1 pin */
+ DIO2_AD2 = 2, /**< DIO2_AD2 pin */
+ DIO3_AD3 = 3, /**< DIO3_AD3 pin */
+ DIO4_AD4 = 4, /**< DIO4_AD4 pin */
+ DIO5_AD5 = 5, /**< DIO5_AD5 pin */
+ DIO6 = 6, /**< DIO6 pin */
+ DIO7 = 7, /**< DIO7 pin */
+ DI8 = 8, /**< DI8 pin */
+ PWM0, /**< PWM0 pin */
+ PWM1 /**< PWM1 pin */
+ };
+
+ enum AssocStatus {
+ ErrorReading = -1, /**< Error occurred when reading parameter. */
+ Joined = 0x00, /**< Successful Completion - Coordinator successfully started or End Device association complete. */
+ ActiveScanTimeOut = 0x01, /**< Active Scan Timeout. */
+ NoPANs = 0x02, /**< Active Scan found no PANs. */
+ JoinNotAllowed = 0x03, /**< Active Scan found PAN, but the Coordinator's Allow Association bit is not set. */
+ BeaconsFailed = 0x04, /**< Active Scan found PAN, but Coordinator and End Device are not configured to support beacons. */
+ BadPAN = 0x05, /**< Active Scan found PAN, but Coordinator ID (PAN ID) value does not match the ID of the End Device. */
+ BadChannel = 0x06, /**< Active Scan found PAN, but Coordinator CH (Channel) value does not match the CH of the End Device */
+ EnergyScanTimeout = 0x07, /**< Energy Scan timed out. */
+ CoordStartFailed = 0x08, /**< Coordinator start request failed. */
+ CoordBadParameters = 0x09, /**< Coordinator could not start due to Invalid Parameter. */
+ CoordRealignment = 0x0A, /**< Coordinator Realignment is in progress. */
+ AssocReqNotSent = 0x0B, /**< Association Request not sent. */
+ AssocReqTimeout = 0x0C, /**< Association Request timed out - no reply was received. */
+ AssocReqInvalidPara = 0x0D, /**< Association Request had an Invalid Parameter. */
+ AssocReqChannelFail = 0x0E, /**< Association Request Channel Access Failure - Request was not transmitted - CCA failure. */
+ RemCoordNoACK = 0x0F, /**< Remote Coordinator did not send an ACK after Association Request was sent. */
+ RemCoordLateACK = 0x10, /**< Remote Coordinator did not reply to the Association Request, but an ACK was received after sending the request. */
+ Associating = 0xFF /**< RF Module is attempting to associate. */
+ };
+
+ /** Class constructor
+ * @param tx the TX pin of the UART that will interface the XBee module
+ * @param rx the RX pin of the UART that will interface the XBee module
+ * @param reset the pin to which the XBee's reset line is attached to, use NC if not available
+ * @param rts the RTS pin for the UART that will interface the XBee module, use NC if not available
+ * @param cts the CTS pin for the UART that will interface the XBee module, use NC if not available
+ * @param baud the baudrate for the UART that will interface the XBee module. Note that the module has to be already configured
+ * to this baud rate (ATBD parameter). By default it is configured to 9600 bps
+ */
+ XBee802(PinName tx, PinName rx, PinName reset = NC, PinName rts = NC, PinName cts = NC, int baud = 9600);
+
+ /** Class destructor */
+ virtual ~XBee802();
+
+ /** init - initializes object
+ * This function must be called just after creating the object so it initializes internal data.
+ * @returns
+ * Success if the module has been properly initialized and is ready to process data.
+ * Failure otherwise.
+ */
+ RadioStatus init();
+
+ /** set_panid - sets the 16 bit PAN ID.
+ *
+ * @param panid the PAN ID value that will be set on the radio
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_panid(uint16_t panid);
+
+ /** get_panid - gets the configured 16 bit PAN ID
+ *
+ * @param panid pointer where the read PAN ID value will be stored
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_panid(uint16_t * const panid);
+
+ /** set_channel - sets the network channel number
+ *
+ * @param channel the channel in which the radio operates. Range is 0x0B - 0x1A for XBee and 0x0C - 0x17 for XBee-PRO.
+ * The Center Frequency = 2.405 + (CH - 11) * 5 MHz
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_channel(uint8_t channel);
+
+ /** get_panid - gets the network channel number
+ *
+ * @param channel pointer where the channel value will be stored.
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_channel(uint8_t * const channel);
+
+ /** get_network_address - gets the 16bit network address of the device
+ *
+ * @param addr pointer where the device 16bit network address will be stored
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_network_address(uint16_t * const addr);
+
+ /** set_network_address - sets the 16 bit network address of the device
+ *
+ * @param addr the device 16bit network address (0x0 - 0xFFFF)
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_network_address(uint16_t addr);
+
+ /** register_node_discovery_cb - registers the callback function that will be called
+ * when the responses to the node discovery command arrive
+ *
+ * @param function function pointer with the callback function
+ */
+ void register_node_discovery_cb(node_discovery_802_cb_t function);
+
+ /** unregister_node_discovery_cb - removes the node discovery callback */
+ void unregister_node_discovery_cb();
+
+ /** register_receive_cb - registers the callback function that will be called
+ * when a rx packet is received
+ *
+ * @param function function pointer with the callback function
+ */
+ void register_receive_cb(receive_802_cb_t function);
+
+ /** unregister_receive_cb - removes the rx packet callback */
+ void unregister_receive_cb();
+
+ /** register_io_sample_cb - registers the callback function that will be called
+ * when a IO Sample Data packet is received
+ *
+ * @param function function pointer with the callback function
+ */
+ void register_io_sample_cb(io_data_cb_802_t function);
+
+ /** unregister_io_sample_cb - removes the IO Sample Data reception callback */
+ void unregister_io_sample_cb();
+
+ /*********************** send_data member methods ************************/
+ /** send_data - sends data to a remote device
+ *
+ * @param remote remote device
+ * @param data pointer to the data that will be sent
+ * @param len number of bytes that will be transmitted
+ * @param syncr if true, method waits for the packet answer with the result of the operation
+ * @returns the result of the data transfer
+ * TxStatusSuccess if the operation was successful,
+ * the error code otherwise
+ */
+ virtual TxStatus send_data(const RemoteXBee& remote, const uint8_t *const data, uint16_t len, bool syncr = true);
+
+ /** get_assoc_status - returns current network association status. This wraps AI parameter, for more information refer to moudle's Reference Manual.
+ *
+ * @returns an AssocStatus with current network association status.
+ */
+ AssocStatus get_assoc_status(void);
+
+ /** get_remote_node_by_id - searches for a device in the network with the specified Node Identifier.
+ *
+ * @param node_id node id of the device we are looking for
+ * @returns a RemoteXBee802 with the 16-bit and 64-bit address of the remote device whose node id matches with the parameter.
+ * If node is not found, the returned object will have invalid addresses (RemoteXBee802::is_valid() will return false).
+ */
+ RemoteXBee802 get_remote_node_by_id(const char * const node_id);
+
+ /* Allow using XBee::set_param() methods for local radio from this class */
+ using XBee::set_param;
+
+ /** set_param - sets a parameter in a remote radio by sending an AT command and waiting for the response.
+ *
+ * @param remote remote device
+ * @param param parameter to be set.
+ * @param data the parameter value (4 bytes) to be set.
+ * @returns the command response status.
+ */
+ virtual AtCmdFrame::AtCmdResp set_param(const RemoteXBee& remote, const char * const param, uint32_t data);
+
+ /** set_param - sets a parameter in a remote radio by sending an AT command and waiting for the response.
+ *
+ * @param remote remote device
+ * @param param parameter to be set.
+ * @param the parameter value byte array (len bytes) to be set.
+ * @param len number of bytes of the parameter value.
+ * @returns the command response status.
+ */
+ virtual AtCmdFrame::AtCmdResp set_param(const RemoteXBee& remote, const char * const param, const uint8_t * data = NULL, uint16_t len = 0);
+
+ /* Allow using XBee::get_param() methods for local radio from this class */
+ using XBee::get_param;
+
+ /** get_param - gets a parameter from a remote radio by sending an AT command and waiting for the response.
+ *
+ * @param remote remote device
+ * @param param parameter to be get.
+ * @param data pointer where the param value (4 bytes) will be stored.
+ * @returns the command response status.
+ */
+ virtual AtCmdFrame::AtCmdResp get_param(const RemoteXBee& remote, const char * const param, uint32_t * const data);
+
+ /** get_param - gets a parameter from a remote radio by sending an AT command and waiting for the response.
+ *
+ * @param remote remote device
+ * @param param parameter to be get.
+ * @param data pointer where the param value (n bytes) will be stored.
+ * @param len pointer where the number of bytes of the param value will be stored.
+ * @returns the command response status.
+ */
+ virtual AtCmdFrame::AtCmdResp get_param(const RemoteXBee& remote, const char * const param, uint8_t * const data, uint16_t * const len);
+
+ /************************* IO member methods **************************/
+ /** set_pin_config - configures a radio IO line
+ *
+ * @param remote remote device
+ * @param line IO line being configured
+ * @param mode configuration mode for the selected line
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_pin_config(const RemoteXBee& remote, IoLine line, IoMode mode);
+
+ /** get_pin_config - gets the configuration of a radio IO line
+ *
+ * @param remote remote device
+ * @param line IO line being read to get its configuration
+ * @param mode pointer where the configuration will be stored
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_pin_config(const RemoteXBee& remote, IoLine line, IoMode * const mode);
+
+ /** set_dio - sets to low/high a DIO line
+ *
+ * @param remote remote device
+ * @param line DIO line being set
+ * @param val value that will be set in the DIO line
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_dio(const RemoteXBee& remote, IoLine line, DioVal val);
+
+ /** get_dio - read the value of a DIO configured as digital input
+ *
+ * @param remote remote device
+ * @param line DIO line being read
+ * @param val pointer where the DIO value read will be stored
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_dio(const RemoteXBee& remote, IoLine line, DioVal * const val);
+
+ /** get_adc - read the value of the espcified ADC line
+ *
+ * @param remote remote device
+ * @param line ADC line being read
+ * @param val pointer where the value read from the ADC will be stored
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_adc(const RemoteXBee& remote, IoLine line, uint16_t * const val);
+
+ /** get_iosample - retrieves an @ref IOSample802 from a remote node. This object can be used to get the remote node's ADC and DIO values.
+ *
+ * @param remote remote device
+ * @returns IOSample802 object with the remote node's DIO and ADC values.
+ */
+ IOSample802 get_iosample(const RemoteXBee& remote);
+
+ /** set_pwm - sets the duty cycle of a PWM line
+ *
+ * @param remote remote device
+ * @param line PWM line being set
+ * @param duty_cycle duty cycle that will be set in the PWM line
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_pwm(const RemoteXBee& remote, IoLine line, float duty_cycle);
+
+ /** set_pin_pull_up - enables or disables the internal pull-up resistor of a line
+ *
+ * @param remote remote device
+ * @param line line being configured for pull-up
+ * @param enable whether to enable the internal pull-up resistor.
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus set_pin_pull_up(const RemoteXBee& remote, IoLine line, bool enable);
+
+ /** enable_dio_change_detection - enables or disables the notification when a change is detected in a digital input line.
+ * In other words, it will force an IO Sample transmission when the DIO state changes. Only for DIO0 to DIO7.
+ *
+ * @param remote remote device
+ * @param line line being configured for pull-up
+ * @param enable whether to enable the internal pull-up resistor.
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus enable_dio_change_detection(const RemoteXBee& remote, IoLine line, bool enable);
+
+/* TODO: With current firmware ATM0 fails: Returns just OK and sets pwm to 0 */
+#ifdef GET_PWM_AVAILABLE
+ /** get_pwm - gets the duty cycle of a PWM line
+ *
+ * @param remote remote device
+ * @param line PWM line being read
+ * @param duty_cycle pointer where the value of the duty cycle read from
+ * the PWM line will be stored
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ RadioStatus get_pwm(const RemoteXBee& remote, IoLine line, float * const duty_cycle);
+#endif
+
+ protected:
+
+ /** Frame handler used for the node discovery. Registered when a callback function
+ * is registered */
+ FH_NodeDiscovery802 *_nd_handler;
+
+ /** Frame handler used for the rx 64 bit packets. Automatically registered when a callback
+ * function is registered */
+ FH_RxPacket64b802 *_rx_64b_handler;
+
+ /** Frame handler used for the rx 16 bit packets. Automatically registered when a callback
+ * function is registered */
+ FH_RxPacket16b802 *_rx_16b_handler;
+
+ /** Frame handler used for the 64 bit IO Data Samples packets. Automatically registered when a callback
+ * function is registered */
+ FH_IoDataSampe64b802 *_io_data_64b_handler;
+
+ /** Frame handler used for the 16 bit IO Data Samples packets. Automatically registered when a callback
+ * function is registered */
+ FH_IoDataSampe16b802 *_io_data_16b_handler;
+
+ /** Method called directly by the library when a modem status frame is received to
+ * update the internal status variables */
+ virtual void radio_status_update(AtCmdFrame::ModemStatus modem_status);
+
+ /* Allow using XBee::send_data() methods from this class */
+ using XBee::send_data;
+
+ /** get_node_discovery_timeout - gets the node discovery timeout
+ *
+ * @param timeout_ms pointer where the node discovery timeout value will be stored
+ * @param wait_for_complete_timeout pointer where the function will store if the operator
+ * has to wait for the complete nd timeout after issuing
+ * a directed nd request
+ * @returns
+ * Success if the operation was successful,
+ * Failure otherwise
+ */
+ virtual RadioStatus get_node_discovery_timeout(uint16_t * const timeout_ms);
+ virtual RadioStatus get_node_discovery_timeout(uint16_t * const timeout_ms, bool * const wait_for_complete_timeout);
+
+ private:
+
+};
+
+} /* namespace XBeeLib */
+
+#endif /* __XBEE_802_H_ */