Vergil Cola / Mbed OS MQTTGatewayK64

Fork of my MQTTGateway

Dependencies:   mbed-http

Diff: XbeeMonitor/XBeeLib/Frames/AtCmdFrame.h

Revision:
0:f1d3878b8dd9
diff -r 000000000000 -r f1d3878b8dd9 XbeeMonitor/XBeeLib/Frames/AtCmdFrame.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/XbeeMonitor/XBeeLib/Frames/AtCmdFrame.h	Sat Apr 08 14:45:51 2017 +0000
@@ -0,0 +1,168 @@
+/**
+ * Copyright (c) 2015 Digi International Inc.,
+ * All rights not expressly granted are reserved.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this file,
+ * You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
+ * =======================================================================
+ */
+
+#if !defined(__AT_CMD_FRAME_H_)
+#define __AT_CMD_FRAME_H_
+
+#include "ApiFrame.h"
+
+#define REM_AT_CMD_RESP_FRM_ID_OFFSET   0
+#define REM_AT_CMD_RESP_STATUS_OFFSET   13
+#define REM_AT_CMD_RESP_CMD_DATA_OFFSET 14
+#define REM_AT_CMD_RESP_OVERHEAD        14 /* ID + ADDR64 + ADDR16 + CMD + status */
+
+#define ATCMD_RESP_FRAME_ID_OFFSET      0
+#define ATCMD_RESP_CMD_LOW_OFFSET       1
+#define ATCMD_RESP_CMD_HIGH_OFFSET      2
+#define ATCMD_RESP_STATUS_OFFSET        3
+#define ATCMD_RESP_DATA_OFFSET          4
+#define ATCMD_RESP_NW_ADDR_H_OFFSET     4
+#define ATCMD_RESP_NW_ADDR_L_OFFSET     5
+#define ATCMD_RESP_SH_ADDR_L_OFFSET     6
+#define ATCMD_RESP_SH_ADDR_H_OFFSET     10
+#define ATCMD_RESP_NI_OFFSET            14
+
+#define ATCMD_RESP_OVERHEAD             4 /* ID + CMD + status */
+
+#define ATCMD_802_RESP_SIGN_STR_OFFSET  14
+#define ATCMD_802_RESP_NI_OFFSET        15
+
+#define MAX_NI_PARAM_LEN                20
+
+/** Class for the AT command api frames. Derived from ApiFrame */
+class AtCmdFrame : public ApiFrame
+{
+    public:
+
+        /**
+         * AtCmdResp
+         */
+        enum AtCmdResp {
+            AtCmdRespOk             = 0,     /**< Ok */
+            AtCmdRespError          = 1,     /**< Error */
+            AtCmdRespInvalidCmd     = 2,     /**< Invalid Command */
+            AtCmdRespInvalidParam   = 3,     /**< Invalid Parameter */
+            AtCmdRespTxFailure      = 4,     /**< Tx Failure */
+            AtCmdRespLenMismatch    = 0xfd,  /**< Length Mismatch (Error generated by the library) */
+            AtCmdRespInvalidAddr    = 0xfe,  /**< Invalid Address (Error generated by the library) */
+            AtCmdRespTimeout        = 0xff,   /**< Timeout (Error generated by the library) */
+        };
+
+        /**
+         * ModemStatus
+         */
+        enum ModemStatus {
+            HwReset         = 0,     /**< Hardware reset */
+            WdReset         = 1,     /**< Watchdog timer reset */
+            JoinedNW        = 2,     /**< Joined network (routers and end devices) */
+            Disassociated   = 3,     /**< Disassociated */
+            SyncLost        = 4,     /**< Synchronization Lost */
+            CoordRealign    = 5,     /**< Coordinator realignment */
+            CoordStarted    = 6,     /**< Coordinator started */
+            NwSecKeyUpdated = 7,     /**< Network security key was updated */
+            NwWokeUp        = 0x0B,  /**< NwWokeUp */
+            NwToSleep       = 0x0C,  /**< NwToSleep */
+            VccExceeded     = 0x0D,  /**< VccExceeded: PRO S2B only? */
+            ModConfChangeJoinInProg = 0x11, /**< Modem configuration changed while join in progress */
+        };
+
+        /** Class constructor
+         *
+         * @param cmd at command of the frame
+         * @param cmd_param command parameter
+         * @param param_len length of the command param
+         */
+        AtCmdFrame(const char * const cmd, const uint32_t cmd_param);
+
+        /** Class constructor
+         *
+         * @param cmd at command of the frame
+         * @param cmd_param pointer to command parameter
+         * @param param_len length of the command param
+         */
+        AtCmdFrame(const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);
+
+        /** Class constructor
+         *
+         * @param remote 64 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_param command parameter
+         */
+        AtCmdFrame(uint64_t remote, const char * const cmd, uint32_t cmd_param);
+
+        /** Class constructor
+         *
+         * @param remote 64 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_param pointer to command parameter
+         * @param param_len length of the command param
+         */
+        AtCmdFrame(uint64_t remote, const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);
+
+        /** Class constructor
+         *
+         * @param remote 16 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_param command parameter
+         */
+        AtCmdFrame(uint16_t remote, const char * const cmd, uint32_t cmd_param);
+
+        /** Class constructor
+         *
+         * @param remote 16 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_param pointer to command parameter
+         * @param param_len length of the command param
+         */
+        AtCmdFrame(uint16_t remote, const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);
+
+        /** Class constructor
+         *
+         * @param remote 64 bit address of the remote device where we want to run the command
+         * @param remote 16 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_param command parameter
+         */
+        AtCmdFrame(uint64_t remote64, uint16_t remote16, const char * const cmd, uint32_t cmd_param);
+
+        /** Class constructor
+         *
+         * @param remote 64 bit address of the remote device where we want to run the command
+         * @param remote 16 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_param pointer to command parameter
+         * @param param_len length of the command param
+         */
+        AtCmdFrame(uint64_t remote64, uint16_t remote16, const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);
+
+    protected:
+        /** build_at_cmd_frame method used by the constructors to create the at command frame
+         *
+         * @param cmd at command of the frame
+         * @param cmd_params pointer to command parameter
+         * @param param_len length of the command param
+         */
+        void build_at_cmd_frame(const char *cmd, const uint8_t *cmd_params, uint8_t payload_len, bool reverse = true);
+
+        /** build_at_cmd_remote_frame method used by the constructors to create the at command frame
+         *
+         * @param remote64 64 bit address of the remote device where we want to run the command
+         * @param remote16 16 bit address of the remote device where we want to run the command
+         * @param cmd at command of the frame
+         * @param cmd_params pointer to command parameter
+         * @param param_len length of the command param
+         */
+        void build_at_cmd_remote_frame(uint64_t remote64, uint16_t remote16,
+                const char *const cmd, const uint8_t *const cmd_params, uint8_t payload_len, bool reverse = true);
+};
+
+#endif /* __AT_CMD_FRAME_H_ */