Vergil Cola
Fork of my MQTTGateway
easy-connect/stm-spirit1-rf-driver/README.md@0:f1d3878b8dd9, 2017-04-08 (annotated)
- Committer:
- vpcola
- Date:
- Sat Apr 08 14:45:51 2017 +0000
- Revision:
- 0:f1d3878b8dd9
Initial commit
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| vpcola | 0:f1d3878b8dd9 | 1 | # Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 Module for STM32 Nucleo # |
| vpcola | 0:f1d3878b8dd9 | 2 | |
| vpcola | 0:f1d3878b8dd9 | 3 | Currently supported boards: |
| vpcola | 0:f1d3878b8dd9 | 4 | * [X-NUCLEO-IDS01A4](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-ids01a4.html) |
| vpcola | 0:f1d3878b8dd9 | 5 | |
| vpcola | 0:f1d3878b8dd9 | 6 | **Note**, in order to use expansion board `X-NUCLEO-IDS01A4` in mbed you need to perform the following HW modifications on the board: |
| vpcola | 0:f1d3878b8dd9 | 7 | * **Un**mount resistor `R4` |
| vpcola | 0:f1d3878b8dd9 | 8 | * **Mount** resistor `R7` |
| vpcola | 0:f1d3878b8dd9 | 9 | |
| vpcola | 0:f1d3878b8dd9 | 10 | Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `SPIRIT1_SPI_MOSI=PB_5` defined, while the development board typically requires some HW modification as e.g. described [here](https://github.com/ARMmbed/sal-nanostack-driver-stm32-eth)! |
| vpcola | 0:f1d3878b8dd9 | 11 | |
| vpcola | 0:f1d3878b8dd9 | 12 | This driver is used with 6LoWPAN stack. |