Diff: easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Irq.c

Revision:

0:a1734fe1ec4b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Irq.c	Sat Apr 08 14:43:14 2017 +0000
@@ -0,0 +1,320 @@
+/**
+  ******************************************************************************
+  * @file    SPIRIT_Irq.c
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+  * @brief   Configuration and management of SPIRIT IRQs.
+  * @details
+  *
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_Irq.h"
+#include "MCU_Interface.h"
+
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @addtogroup SPIRIT_Irq
+ * @{
+ */
+
+
+/**
+ * @defgroup Irq_Private_TypesDefinitions       IRQ Private Types Definitions
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Irq_Private_Defines                IRQ Private Defines
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Irq_Private_Macros                 IRQ Private Macros
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Irq_Private_Variables              IRQ Private Variables
+ * @{
+ */
+
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Irq_Private_FunctionPrototypes     IRQ Private Function Prototypes
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Irq_Private_Functions              IRQ Private Functions
+ * @{
+ */
+
+
+/**
+ * @brief  De initializate the SpiritIrqs structure setting all the bitfield to 0.
+ *         Moreover, it sets the IRQ mask registers to 0x00000000, disabling all IRQs.
+ * @param  pxIrqInit pointer to a variable of type @ref SpiritIrqs, in which all the
+ *         bitfields will be settled to zero.
+ * @retval None.
+ */
+void SpiritIrqDeInit(SpiritIrqs* pxIrqInit)
+{
+  uint8_t tempRegValue[4]={0x00,0x00,0x00,0x00};
+
+  if(pxIrqInit!=NULL)
+  {
+    /* Sets the bitfields of passed structure to one */
+    *(uint32_t*)pxIrqInit = 0x0;
+  }
+
+  /* Writes the IRQ_MASK registers */
+  g_xStatus = SpiritSpiWriteRegisters(IRQ_MASK3_BASE, 4, tempRegValue);
+}
+
+
+/**
+ * @brief  Enables all the IRQs according to the user defined pxIrqInit structure.
+ * @param  pxIrqInit pointer to a variable of type @ref SpiritIrqs, through which the
+ *         user enable specific IRQs. This parameter is a pointer to a SpiritIrqs.
+ *         For example suppose to enable only the two IRQ Low Battery Level and Tx Data Sent:
+ * @code
+ * SpiritIrqs myIrqInit = {0};
+ * myIrqInit.IRQ_LOW_BATT_LVL = 1;
+ * myIrqInit.IRQ_TX_DATA_SENT = 1;
+ * SpiritIrqInit(&myIrqInit);
+ * @endcode
+ * @retval None.
+ */
+void SpiritIrqInit(SpiritIrqs* pxIrqInit)
+{
+  /* Writes the IRQ_MASK registers */
+  g_xStatus = SpiritSpiWriteRegisters(IRQ_MASK3_BASE, 4, (uint8_t*)pxIrqInit);
+
+}
+
+
+/**
+ * @brief  Enables or disables a specific IRQ.
+ * @param  xIrq IRQ to enable or disable.
+ *         This parameter can be any value of @ref IrqList.
+ * @param  xNewState new state for the IRQ.
+ *         This parameter can be: S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+void SpiritIrq(IrqList xIrq, SpiritFunctionalState xNewState)
+{
+  uint8_t tempRegValue[4];
+  uint32_t tempValue = 0;
+
+  /* Check the parameters */
+  s_assert_param(IS_SPIRIT_IRQ_LIST(xIrq));
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
+
+  /* Reads the IRQ_MASK registers */
+  g_xStatus = SpiritSpiReadRegisters(IRQ_MASK3_BASE, 4, tempRegValue);
+
+  /* Build the IRQ mask word */
+  for(uint8_t i=0; i<4; i++)
+  {
+    tempValue += ((uint32_t)tempRegValue[i])<<(8*(3-i));
+  }
+  
+  /* Rebuild the new mask according to user request */
+  if(xNewState == S_DISABLE)
+  {
+    tempValue &= (~xIrq);
+  }
+  else
+  {
+    tempValue |= (xIrq);
+  }
+
+  /* Build the array of bytes to write in the IRQ_MASK registers */
+  for(uint8_t j=0; j<4; j++)
+  {
+    tempRegValue[j] = (uint8_t)(tempValue>>(8*(3-j)));
+  }
+  
+  /* Writes the new IRQ mask in the corresponding registers */
+  g_xStatus = SpiritSpiWriteRegisters(IRQ_MASK3_BASE, 4, tempRegValue);
+
+}
+
+
+/**
+ * @brief  Fills a pointer to a structure of SpiritIrqs type reading the IRQ_MASK registers.
+ * @param  pxIrqMask pointer to a variable of type @ref SpiritIrqs, through which the
+ *         user can read which IRQs are enabled. All the bitfields equals to zero correspond
+ *         to enabled IRQs, while all the bitfields equals to one correspond to disabled IRQs.
+ *         This parameter is a pointer to a SpiritIrqs.
+ *         For example suppose that the Power On Reset and RX Data ready are the only enabled IRQs.
+ * @code
+ * SpiritIrqs myIrqMask;
+ * SpiritIrqGetStatus(&myIrqMask);
+ * @endcode
+ * Then
+ * myIrqMask.IRQ_POR and myIrqMask.IRQ_RX_DATA_READY are equal to 0
+ * while all the other bitfields are equal to one.
+ * @retval None.
+ */
+void SpiritIrqGetMask(SpiritIrqs* pxIrqMask)
+{
+  /* Reads IRQ_MASK registers */
+  g_xStatus = SpiritSpiReadRegisters(IRQ_MASK3_BASE, 4, (uint8_t*)pxIrqMask);
+}
+
+
+/**
+ * @brief  Filla a pointer to a structure of SpiritIrqs type reading the IRQ_STATUS registers.
+ * @param  pxIrqStatus pointer to a variable of type @ref SpiritIrqs, through which the
+ *         user can read the status of all the IRQs. All the bitfields equals to one correspond
+ *         to the raised interrupts. This parameter is a pointer to a SpiritIrqs.
+ *         For example suppose that the XO settling timeout is raised as well as the Sync word
+ *         detection.
+ * @code
+ * SpiritIrqs myIrqStatus;
+ * SpiritIrqGetStatus(&myIrqStatus);
+ * @endcode
+ * Then
+ * myIrqStatus.IRQ_XO_COUNT_EXPIRED and myIrqStatus.IRQ_VALID_SYNC are equals to 1
+ * while all the other bitfields are equals to zero.
+ * @retval None.
+ */
+void SpiritIrqGetStatus(SpiritIrqs* pxIrqStatus)
+{
+  /* Reads IRQ_STATUS registers */
+  g_xStatus = SpiritSpiReadRegisters(IRQ_STATUS3_BASE, 4, (uint8_t*)pxIrqStatus);
+}
+
+
+/**
+ * @brief  Clear the IRQ status registers.
+ * @param  None.
+ * @retval None.
+ */
+void SpiritIrqClearStatus(void)
+{
+  uint8_t tempRegValue[4];
+
+  /* Reads the IRQ_STATUS registers clearing all the flags */
+  g_xStatus = SpiritSpiReadRegisters(IRQ_STATUS3_BASE, 4, tempRegValue);
+
+}
+
+
+/**
+ * @brief  Verifies if a specific IRQ has been generated.
+ *         The call resets all the IRQ status, so it can't be used in case of multiple raising interrupts.
+ * @param  xFlag IRQ flag to be checked.
+ *         This parameter can be any value of @ref IrqList.
+ * @retval SpiritBool S_TRUE or S_FALSE.
+ */
+SpiritBool SpiritIrqCheckFlag(IrqList xFlag)
+{
+  uint8_t tempRegValue[4];
+  uint32_t tempValue = 0;
+  SpiritBool flag;
+
+  /* Check the parameters */
+  s_assert_param(IS_SPIRIT_IRQ_LIST(xFlag));
+
+  /* Reads registers and build the status word */
+  g_xStatus = SpiritSpiReadRegisters(IRQ_STATUS3_BASE, 4, tempRegValue);
+  for(uint8_t i=0; i<4; i++)
+  {
+    tempValue += ((uint32_t)tempRegValue[i])<<(8*(3-i));
+  }
+  
+  if(tempValue & xFlag)
+  {
+    flag = S_TRUE;
+  }
+  else
+  {
+    flag = S_FALSE;
+  }
+
+  return flag;
+
+}
+
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/