File content as of revision 0:ca687da7d225:

#include "mbed.h"

DigitalOut myled(LED1);
Serial pc(USBTX, USBRX);
//Serial uart(p13,p14);
SPI spiTest(p5, p6, p7);
DigitalOut cs(p8);

int main() {
    //I2C
    while(1) {

    }
}

/*
int main() {
    //https://developer.mbed.org/handbook/SerialPC
    //https://developer.mbed.org/handbook/mbed-NXP-LPC1768-Getting-Started
    //pc.printf("Echoes back to the screen anything you type\n");
    int nombre = 2;
    cs = 1;
    //uart.printf("%d",nombre);
    // Setup the spi for 8 bit data, high steady state clock,
    // second edge capture, with a 1MHz clock rate
    // spiTest.format(8,3);
    // spiTest.frequency(1000000);
    cs = 0;
 
    // Send 0x8f, the command to read the WHOAMI register
    int t =  spiTest.write(0x8F);
    pc.printf("WHOAMI register = %X\r\n", t);
 
    // Send a dummy byte to receive the contents of the WHOAMI register
    //int whoami = spiTest.write(0x00);
    //printf("WHOAMI register = 0x%X\n", whoami);
    cs = 1;
    while(1) {
        //uart.printf("%c",pc.getc());
        cs = 0;
 
        // Send 0x8f, the command to read the WHOAMI register
        pc.scanf("%d",&nombre);
        t = spiTest.write(nombre);
        pc.printf("WHOAMI register = %X\r\n", t);
        cs = 0;
        myled = 1;
        wait(0.2);
        myled = 0;
        wait(0.2);
        //pc.putc(pc.getc());
    }
}
*/