File content as of revision 1:df8884d38960:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2014 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <events/mbed_events.h>
#include <mbed.h>
#include "MPU9250.h"
#include "ble/BLE.h"
#include "ble/Gap.h"
#include "ble/services/HeartRateService.h"

#define Kp 2.0f * 5.0f // these are the free parameters in the Mahony filter and fusion scheme, Kp for proportional feedback, Ki for integral
#define Ki 0.0f

//******************************************************************************
MPU9250::MPU9250(PinName sda, PinName scl)
{
    i2c_ = new I2C(sda, scl);
    i2c_->frequency(400000);
}

//******************************************************************************
MPU9250::MPU9250(I2C *i2c):i2c_(i2c){}

//******************************************************************************

DigitalOut led1(LED1, 1);

const static char     DEVICE_NAME[] = "ProVaida";
static const uint16_t uuid16_list[] = {GattService::UUID_HEART_RATE_SERVICE};

uint8_t hrmCounter = 100;
static HeartRateService* hrService;

static EventQueue eventQueue(/* event count */ 16 * EVENTS_EVENT_SIZE);

void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
{
    BLE::Instance().gap().startAdvertising();
}







void updateSensorValue() {
    hrmCounter++;
    if (hrmCounter > 175) {
        hrmCounter = 100;
    }
    hrService->updateHeartRate(hrmCounter);
}

void blinkCallback(void)
{
    led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */

    BLE &ble = BLE::Instance();
    if (ble.gap().getState().connected) {
        eventQueue.call(updateSensorValue);
    }
}

/**
 * This function is called when the ble initialization process has failed
 */
void onBleInitError(BLE &ble, ble_error_t error)
{
    /* Initialization error handling should go here */
}

void printMacAddress()
{
    /* Print out device MAC address to the console*/
    Gap::AddressType_t addr_type;
    Gap::Address_t address;
    BLE::Instance().gap().getAddress(&addr_type, address);
    printf("DEVICE MAC ADDRESS: ");
    for (int i = 5; i >= 1; i--){
        printf("%02x:", address[i]);
    }
    printf("%02x\r\n", address[0]);
}

/**
 * Callback triggered when the ble initialization process has finished
 */
void bleInitComplete(BLE::InitializationCompleteCallbackContext *params)
{
    BLE&        ble   = params->ble;
    ble_error_t error = params->error;

    if (error != BLE_ERROR_NONE) {
        /* In case of error, forward the error handling to onBleInitError */
        onBleInitError(ble, error);
        return;
    }

    /* Ensure that it is the default instance of BLE */
    if(ble.getInstanceID() != BLE::DEFAULT_INSTANCE) {
        return;
    }

    ble.gap().onDisconnection(disconnectionCallback);

    /* Setup primary service */
    hrService = new HeartRateService(ble, hrmCounter, HeartRateService::LOCATION_FINGER);

    /* Setup advertising */
    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *) uuid16_list, sizeof(uuid16_list));
    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *) DEVICE_NAME, sizeof(DEVICE_NAME));
    ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
    ble.gap().setAdvertisingInterval(1000); /* 1000ms */
    ble.gap().startAdvertising();

    printMacAddress();
}

void scheduleBleEventsProcessing(BLE::OnEventsToProcessCallbackContext* context) {
    BLE &ble = BLE::Instance();
    eventQueue.call(Callback<void()>(&ble, &BLE::processEvents));
}

int main()
{
    eventQueue.call_every(500, blinkCallback);

    BLE &ble = BLE::Instance();
    ble.onEventsToProcess(scheduleBleEventsProcessing);
    ble.init(bleInitComplete);

    eventQueue.dispatch_forever();

    return 0;
}