Diff: RAPIDMP3.cpp

Revision:

2:8c6ca0906114

Parent:

1:dbb63bd6c828

--- a/RAPIDMP3.cpp	Fri Nov 21 10:44:09 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,351 +0,0 @@
-/****************************************************************************
- * file     RAPIDMP3.cpp
- * author   Vasanth Kumar.D (www.chipthinglabs.com)
- * date     July 2014
- * brief    Rapid MP3 module driver code
- *
- * Project:
- * Rapid MP3 v1.0 driver code
- * The driver code is compatible with any mbed enabled microcontroller platform
- *
- * Description:
- * This is a sample code that shows how to control a Rapid MP3 module
- * using the UART peripheral of MBED micro. The code provides a set of API functions
- * to access and control the module using UART peripheral. 
- *
- * Copyright (C) 2014, Chipthing Labs, all right reserved.
- * The Rapid MP3 code is a free software and there is NO WARRANTY.
- * No restriction on use. You can use, modify and redistribute it for
- * personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
- * Redistributions of source code must retain the above copyright notice.
- ****************************************************************************/
-
-#include "mbed.h"
-#include "RAPIDMP3.h"
-
-/**************************************************************************/
-
-RAPIDMP3::RAPIDMP3(PinName Tx, PinName Rx) : serialRMP3(Tx, Rx) {
-    serialRMP3.baud(9600);
-}
-/**************************************************************************/
-
-void RAPIDMP3::transmitEndOfFrame() {
-    serialRMP3.puts("\r\n");
-}
-/**************************************************************************/
-
-void RAPIDMP3::getResponseStr() {
-    uint8_t i, temp;
-    i = 0;
-    do{
-        temp = serialRMP3.getc();
-        responseStr[i] = temp;
-        i++;
-    }while (temp != '\n');
-    responseStr[i] = '\0';
-}
-/**************************************************************************/
-
-uint8_t RAPIDMP3::getResponse() {
-    uint8_t response = RMP3_ER;
-    
-    getResponseStr();
-    
-    if (strcmp((const char *) responseStr, "OK\r\n") == 0) {
-        response = RMP3_OK;
-    }
-    return response;
-}
-
-/**************************************************************************/
-/*
-    @brief          Checks whether the module is responding
-                    to serial communication requests
-
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
-    
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::checkDevice() {
-    uint8_t response = RMP3_ER;
-
-    serialRMP3.puts("AT\r\n");
-    getResponseStr();
-
-    if (strcmp((const char *) responseStr, "OK\r\n") == 0) {
-        response = RMP3_OK;
-    }
-    return response;
-}
-/**************************************************************************/
-/*!
-    @brief  Plays a MP3 or WAV file from an SD card
-            
-    @param[in]  fileName
-                Pointer to the filename of stored MP3 or WAV file
-                only 8.3 file name format is supported
-
-    @param[out] RMP3_OK or RMP3_ER
-
-    @section Example
-
-    @code
-
-    uint8_t response;
-    response = rmp3.playFile("my_file.mp3");
-    if (response == RMP3_OK) {
-        rmp3.waitEndOfPlay();
-    }
-
-    @endcode
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::playFile(const char *fileName) {
-    serialRMP3.puts("AT+PLAY=");
-    serialRMP3.putc('"');
-    serialRMP3.puts(fileName);
-    serialRMP3.putc('"');
-    transmitEndOfFrame();
-    
-    return getResponse();
-}
-
-/**************************************************************************/
-/*
-    @brief          Waits until the current playback
-                    gets completely finished
-                    
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
-
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::waitEndOfPlay() {
-    uint8_t response = RMP3_ER;
-    getResponseStr();
-
-    if (strcmp((const char *) responseStr, "FREE\r\n") == 0) {
-        response = RMP3_OK;
-    }
-    return response;
-}
-
-/**************************************************************************/
-/*
-    @brief          Waits for the device to indicate 
-                    the initialization is complete
-                    
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
-
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::waitDeviceFree() {
-    return waitEndOfPlay();
-}
-
-/**************************************************************************/
-/*
-    @brief          Stops the current playback
-
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
-
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::stop() {
-    serialRMP3.puts("AT+STOP\r\n");
-    
-    uint8_t response;
-    response = getResponse();
-    if (response == RMP3_OK) {
-        return waitEndOfPlay();
-    }
-    return RMP3_ER;
-}
-/**************************************************************************/
-/*
-    @brief          Pause the current playback
-
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
-
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::playPause() {
-    serialRMP3.puts("AT+PAUSE\r\n");    
-    return getResponse();
-}
-/**************************************************************************/
-/*
-    @brief          Resume the current playback
-
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
-
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::playResume() {
-    serialRMP3.puts("AT+RESUME\r\n");
-    return getResponse();
-}
-/**************************************************************************/
-/*
-    @brief          Sets the volume level
-
-    @param[in]      vol
-                    volume level to be set
-                    values it can take: 0 to 9
-                    where 0 is maximum volume and 9 is mute
-
-    @param[out]     RMP3_OK or RMP3_ER
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::volumeSet(uint8_t vol) {
-    if (vol > 9) {
-        return RMP3_ER;
-    }
-    serialRMP3.puts("AT+VOL=");
-    serialRMP3.putc(vol + '0');
-    transmitEndOfFrame();
-    
-    return getResponse();
-}
-/**************************************************************************/
-/*
-    @brief          Gets the volume level
-
-    @param[in]      none                    
-
-    @param[out]     current volume level
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::volumeGet() {
-    uint8_t volumeLevel = 0;
-
-    serialRMP3.puts("AT+VOL=?\r\n");
-    getResponseStr();
-
-    volumeLevel = responseStr[4];
-    volumeLevel -= '0';   // ASCII to decimal
-
-    return volumeLevel;
-}
-/**************************************************************************/
-/*
-    @brief          Increases the volume level
-
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::volumeInc() {
-    serialRMP3.puts("AT+INC\r\n");    
-    return getResponse();
-}
-/**************************************************************************/
-/*
-    @brief          Decreases the volume level
-
-    @param[in]      none
-
-    @param[out]     RMP3_OK or RMP3_ER
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::volumeDec() {
-    serialRMP3.puts("AT+DEC\r\n");
-    return getResponse();
-}
-/**************************************************************************/
-/*
-    @brief          Gets the system state, either BUSY or FREE
-
-    @param[in]      none
-
-    @param[out]     RMP3_FREE or RMP3_BUSY
-
-    Description     When either playback or recording is going on
-                    system state is BUSY
-                    When the module is not doing any of the two process,
-                    system state is FREE
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::getPlaybackStatus() {
-    uint8_t systemState = RMP3_NONE;
-
-    serialRMP3.puts("AT+STATUS=?\r\n");
-    getResponseStr();
-
-    if (strcmp((const char *) responseStr, "BUSY\r\n") == 0) {
-        systemState = RMP3_BUSY;
-    } else if (strcmp((const char *) responseStr, "FREE\r\n") == 0) {
-        systemState = RMP3_FREE;
-    }
-    return systemState;
-}
-/**************************************************************************/
-/*!
-    @brief  Records audio as WAV file and saves it in an SD card
-
-    @param[in]  fileName
-                Pointer to the filename of the WAV file where the recording should be stored                
-                Only 8.3 file name format is supported
-
-    @param[out] RMP3_OK or RMP3_ER
-
-    Note        Calling this function creates a new .wav file in the specified name
-                within the microSD memory card
-
-    @section Example
-
-    @code
-
-    uint8_t response;
-    response = rmp3.recordFile("rec_1.wav");
-  
-    if (response == RMP3_OK) {
-        wait(10.0);
-        rmp3.stop();
- 
-        rmp3.playFile("rec_1.wav");
-        rmp3.waitEndOfPlay();
-    }
- 
-    @endcode
- */
-/**************************************************************************/
-
-uint8_t RAPIDMP3::recordFile(const char *fileName) {
-    serialRMP3.puts("AT+RECD=");
-    serialRMP3.putc('"');
-    serialRMP3.puts(fileName);
-    serialRMP3.putc('"');
-    transmitEndOfFrame();
-
-    return getResponse();
-}
-
-/**************************************************************************/
-                                /* END */
-/**************************************************************************/