Diff: LPC4088-USBHost/USBHost/USBHALHost.cpp

Revision:

1:26a4baad1736

Parent:

0:11152e69fc05

--- a/LPC4088-USBHost/USBHost/USBHALHost.cpp	Tue Apr 22 10:54:52 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,388 +0,0 @@
-/* mbed USBHost Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
- 
-#include "USBHALHost.h"
-//#define _USB_DBG
-#include "BaseUsbHostDebug.h"
-#include "BaseUsbHostTest.h"
-
-#ifndef CTASSERT
-template <bool>struct CtAssert;
-template <>struct CtAssert<true> {};
-#define CTASSERT(A) CtAssert<A>();
-#endif
-
-#ifdef _USB_DBG
-#define USB_DBG(...) do{fprintf(stderr,"[%s@%d] ",__PRETTY_FUNCTION__,__LINE__);fprintf(stderr,__VA_ARGS__);fprintf(stderr,"\n");} while(0);
-#define USB_DBG_HEX(A,B) debug_hex(A,B)
-void debug_hex(uint8_t* buf, int size);
-#else
-#define USB_DBG(...) while(0)
-#define USB_DBG_HEX(A,B) while(0)
-#endif
-
-#ifdef _USB_TEST
-#define USB_TEST_ASSERT(A) while(!(A)){fprintf(stderr,"\n\n%s@%d %s ASSERT!\n\n",__PRETTY_FUNCTION__,__LINE__,#A);exit(1);};
-#define USB_TEST_ASSERT_FALSE(A) USB_TEST_ASSERT(!(A))
-#else
-#define USB_TEST_ASSERT(A) while(0)
-#define USB_TEST_ASSERT_FALSE(A) while(0)
-#endif
-
-#define USB_INFO(...) do{fprintf(stderr,__VA_ARGS__);fprintf(stderr,"\n");}while(0);
-
-// bits of the USB/OTG clock control register
-#define HOST_CLK_EN     (1<<0)
-#define DEV_CLK_EN      (1<<1)
-#define PORTSEL_CLK_EN  (1<<3)
-#define AHB_CLK_EN      (1<<4)
-
-// bits of the USB/OTG clock status register
-#define HOST_CLK_ON     (1<<0)
-#define DEV_CLK_ON      (1<<1)
-#define PORTSEL_CLK_ON  (1<<3)
-#define AHB_CLK_ON      (1<<4)
-
-// we need host clock, OTG/portsel clock and AHB clock
-#define CLOCK_MASK (HOST_CLK_EN | PORTSEL_CLK_EN | AHB_CLK_EN)
-#define  FI                     0x2EDF           /* 12000 bits per frame (-1) */
-#define  DEFAULT_FMINTERVAL     ((((6 * (FI - 210)) / 7) << 16) | FI)
-
-USBHALHost* USBHALHost::instHost;
-
-USBHALHost::USBHALHost() {
-    instHost = this;
-}
-
-void USBHALHost::init() {
-    NVIC_DisableIRQ(USB_IRQn);
-    m_pHcca = new HCCA();
-    init_hw_ohci(m_pHcca);
-    ResetRootHub();
-    NVIC_SetVector(USB_IRQn, (uint32_t)_usbisr);
-    NVIC_SetPriority(USB_IRQn, 0);
-    NVIC_EnableIRQ(USB_IRQn);
-    
-#ifndef BASE_USBHOST
-    USB_INFO("Simple USBHost Library for EA LPC4088 QSB");
-    bool lowSpeed = false;
-    addDevice(NULL, 0, lowSpeed);
-#endif // BASE_USBHOST
-}
-
-void USBHALHost::init_hw_ohci(HCCA* pHcca) {
-    LPC_SC->PCONP &= ~(1UL<<31);    //Cut power
-    wait(1);
-    LPC_SC->PCONP |= (1UL<<31);     // turn on power for USB
-    LPC_USB->USBClkCtrl |= CLOCK_MASK; // Enable USB host clock, port selection and AHB clock
-    // Wait for clocks to become available
-    while ((LPC_USB->USBClkSt & CLOCK_MASK) != CLOCK_MASK)
-        ;
-    LPC_USB->OTGStCtrl |= 1;
-    LPC_USB->USBClkCtrl &= ~PORTSEL_CLK_EN;
-    
-#if defined(TARGET_LPC1768)
-    LPC_PINCON->PINSEL1 &= ~((3<<26) | (3<<28));  
-    LPC_PINCON->PINSEL1 |=  ((1<<26)|(1<<28));     // 0x14000000
-#elif defined(TARGET_LPC4088)
-    LPC_IOCON->P0_29 = 0x01; // USB_D+1
-    LPC_IOCON->P0_30 = 0x01; // USB_D-1
-    // DO NOT CHANGE P1_19.
-#else
-#error "target error"
-#endif
-    DBG("initialize OHCI\n");
-    wait_ms(100);                                   /* Wait 50 ms before apply reset              */
-    TEST_ASSERT((LPC_USB->HcRevision&0xff) == 0x10); // check revision
-    LPC_USB->HcControl       = 0;                       /* HARDWARE RESET                             */
-    LPC_USB->HcControlHeadED = 0;                       /* Initialize Control list head to Zero       */
-    LPC_USB->HcBulkHeadED    = 0;                       /* Initialize Bulk list head to Zero          */
-                                                        /* SOFTWARE RESET                             */
-    LPC_USB->HcCommandStatus = OR_CMD_STATUS_HCR;
-    LPC_USB->HcFmInterval    = DEFAULT_FMINTERVAL;      /* Write Fm Interval and Largest Data Packet Counter */
-    LPC_USB->HcPeriodicStart = FI*90/100;
-                                                      /* Put HC in operational state                */
-    LPC_USB->HcControl  = (LPC_USB->HcControl & (~OR_CONTROL_HCFS)) | OR_CONTROL_HC_OPER;
-    LPC_USB->HcRhStatus = OR_RH_STATUS_LPSC;            /* Set Global Power */
-    TEST_ASSERT(pHcca);
-    for (int i = 0; i < 32; i++) {
-        pHcca->InterruptTable[i] = NULL;
-    }
-    LPC_USB->HcHCCA = reinterpret_cast<uint32_t>(pHcca);
-    LPC_USB->HcInterruptStatus |= LPC_USB->HcInterruptStatus; /* Clear Interrrupt Status */
-    LPC_USB->HcInterruptEnable  = OR_INTR_ENABLE_MIE|OR_INTR_ENABLE_WDH|OR_INTR_ENABLE_FNO;
-
-    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_CSC;
-    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC;
-}
-
-void USBHALHost::ResetRootHub() {
-    wait_ms(100); /* USB 2.0 spec says at least 50ms delay before port reset */
-    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRS; // Initiate port reset
-    DBG("Before loop\n");
-    while (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_PRS)
-      ;
-    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC; // ...and clear port reset signal
-    DBG("After loop\n");
-    wait_ms(200); /* Wait for 100 MS after port reset  */
-}
-
-void USBHALHost::enable(ENDPOINT_TYPE type) {
-    switch(type) {
-        case CONTROL_ENDPOINT:
-            LPC_USB->HcCommandStatus |= OR_CMD_STATUS_CLF;
-            LPC_USB->HcControl |= OR_CONTROL_CLE;
-            break;
-        case ISOCHRONOUS_ENDPOINT:
-            LPC_USB->HcControl |= OR_CONTROL_PLE;
-            break;
-        case BULK_ENDPOINT:
-            LPC_USB->HcCommandStatus |= OR_CMD_STATUS_BLF;
-            LPC_USB->HcControl |= OR_CONTROL_BLE;
-            break;
-        case INTERRUPT_ENDPOINT:
-            LPC_USB->HcControl |= OR_CONTROL_PLE;
-            break;
-    }
-}
-
-void USBHALHost::token_init(USBEndpoint* ep) {
-    if (ep->m_pED == NULL) {
-        ep->m_pED = new HCED(ep);
-        USB_DBG_ED(ep->m_pED);
-    }
-    HCED* ed = ep->m_pED;
-    USBDeviceConnected* dev = ep->getDevice();
-    USB_TEST_ASSERT(dev);
-    if (dev) {
-        uint8_t devAddr = dev->getAddress();
-        USB_DBG("devAddr=%02x", devAddr);
-        ed->setFunctionAddress(devAddr);
-    }
-    uint16_t size = ep->getSize();
-    USB_DBG("MaxPacketSize=%d", size);
-    ed->setMaxPacketSize(size);
-    if (ed->HeadTd == NULL) {
-        HCTD* td = new HCTD(ep);
-        ed->TailTd = td;
-        ed->HeadTd = td;
-        switch(ep->getType()) {
-            case CONTROL_ENDPOINT:
-                ed->Next = reinterpret_cast<HCED*>(LPC_USB->HcControlHeadED);
-                LPC_USB->HcControlHeadED = reinterpret_cast<uint32_t>(ed);
-                break;
-            case BULK_ENDPOINT:
-                ed->Next = reinterpret_cast<HCED*>(LPC_USB->HcBulkHeadED);
-                LPC_USB->HcBulkHeadED = reinterpret_cast<uint32_t>(ed);
-                break;
-            case INTERRUPT_ENDPOINT:
-                HCCA* pHcca = reinterpret_cast<HCCA*>(LPC_USB->HcHCCA);
-                ed->Next = pHcca->InterruptTable[0];
-                pHcca->InterruptTable[0] = ed;
-                break;
-        }
-        USB_DBG_ED(ed);
-    }
-}
-
-int USBHALHost::token_setup(USBEndpoint* ep, SETUP_PACKET* setup, uint16_t wLength) {
-    token_init(ep);
-    HCED* ed = ep->m_pED;
-    HCTD* td = ed->TailTd;
-    setup->wLength = wLength;
-    TBUF* tbuf = new(sizeof(SETUP_PACKET))TBUF(setup, sizeof(SETUP_PACKET));
-    td->transfer(tbuf, sizeof(SETUP_PACKET));
-    td->Control |= TD_TOGGLE_0|TD_SETUP; 
-    HCTD* blank = new HCTD(ep);
-    td->Next = blank;
-    ed->TailTd = blank;
-    //DBG_ED(ed);
-    enable(ep->getType());
-
-    td = ep->get_queue_HCTD();
-    TEST_ASSERT(td);
-    int result = td->getLengthTransferred();
-    DBG_TD(td);
-    delete tbuf;
-    delete td;
-    return result;
-}
-
-int USBHALHost::token_in(USBEndpoint* ep, uint8_t* data, int size, int retryLimit) {
-    token_init(ep);
-    HCED* ed = ep->m_pED;
-    HCTD* td = ed->TailTd;
-    TBUF* tbuf = NULL;
-    if (data != NULL) {
-        tbuf = new(size)TBUF();
-        td->transfer(tbuf, size);
-    }
-    td->Control |= TD_IN;
-    HCTD* blank = new HCTD(ep);
-    td->Next = blank;
-    ed->TailTd = blank;
-    USB_DBG_ED_IF(ed->EndpointNumber()==0, ed); // control transfer
-    enable(ep->getType());
-
-    td = ep->get_queue_HCTD();
-    TEST_ASSERT(td);
-    if (data != NULL) {
-        memcpy(data, tbuf->buf, size);
-        delete tbuf;
-    }
-    int result = td->getLengthTransferred();
-    delete td;
-    return result;
-}
-
-int USBHALHost::token_out(USBEndpoint* ep, const uint8_t* data, int size, int retryLimit) {
-    token_init(ep);
-    HCED* ed = ep->m_pED;
-    HCTD* td = ed->TailTd;
-    TBUF* tbuf = NULL;
-    if (data != NULL) {
-        tbuf = new(size)TBUF(data, size);
-        td->transfer(tbuf, size);
-    }
-    td->Control |= TD_OUT;
-    HCTD* blank = new HCTD(ep);
-    td->Next = blank;
-    ed->TailTd = blank;
-    DBG_ED(ed);
-    enable(ep->getType());
-
-    td = ep->get_queue_HCTD();
-    TEST_ASSERT(td);
-    if (data != NULL) {
-        delete tbuf;
-    }
-    int result = td->getLengthTransferred();
-    delete td;
-    return result;
-}
-
-void USBHALHost::token_inNB(USBEndpoint* ep, uint8_t* data, int size) {
-    token_init(ep);
-    HCED* ed = ep->m_pED;
-    HCTD* td = ed->TailTd;
-    TBUF* tbuf = new(size)TBUF();
-    td->transfer(tbuf, size);
-    td->Control |= TD_IN;
-    HCTD* blank = new HCTD(ep);
-    td->Next = blank;
-    ed->TailTd = blank;
-    enable(ep->getType());
-}
-
-USB_TYPE USBHALHost::token_inNB_result(USBEndpoint* ep) {
-    HCTD* td = ep->get_queue_HCTD(0);
-    if (td) {
-        int len = td->getLengthTransferred();
-        TBUF* tbuf = (TBUF*)td->buf_top;
-        memcpy(ep->getBufStart(), tbuf->buf, len);
-        ep->setLengthTransferred(len);
-        delete td;
-        delete tbuf;
-        return USB_TYPE_OK;
-    }
-    return USB_TYPE_PROCESSING;
-}
-
-void USBHALHost::_usbisr(void) {
-    if (instHost) {
-        instHost->UsbIrqhandler();
-    }
-}
-
-HCTD* td_reverse(HCTD* td)
-{
-    HCTD* result = NULL;
-    HCTD* next;
-    while(td) {
-        next = const_cast<HCTD*>(td->Next);
-        td->Next = result;
-        result = td;
-        td = next;
-    }
-    return result;
-}
-
-void USBHALHost::UsbIrqhandler() {
-    if (!(LPC_USB->HcInterruptStatus & LPC_USB->HcInterruptEnable)) {
-        return;
-    }
-    m_report_irq++;
-    uint32_t status = LPC_USB->HcInterruptStatus;
-    if (status & OR_INTR_STATUS_FNO) {
-        m_report_FNO++;
-    }
-    if (status & OR_INTR_STATUS_WDH) {
-        union {
-            HCTD* done_td;
-            uint32_t lsb;
-        };
-        done_td = const_cast<HCTD*>(m_pHcca->DoneHead);
-        TEST_ASSERT(done_td);
-        m_pHcca->DoneHead = NULL; // reset
-        if (lsb & 1) { // error ?
-            lsb &= ~1;
-        }
-        HCTD* td = td_reverse(done_td);
-        while(td) {
-            USBEndpoint* ep = td->ep;
-            TEST_ASSERT(ep);
-            if (ep) {
-                ep->irqWdhHandler(td);
-            }
-            td = td->Next;
-        }
-        m_report_WDH++;
-    }
-    LPC_USB->HcInterruptStatus = status; // Clear Interrrupt Status
-}
-
-HCTD::HCTD(USBEndpoint* obj) {
-    CTASSERT(sizeof(HCTD) == 36);
-    TEST_ASSERT(obj);
-    Control = TD_CC|TD_ROUNDING;
-    CurrBufPtr = NULL;
-    Next = NULL;
-    BufEnd = NULL;
-    buf_top = NULL;
-    buf_size = 0;
-    ep = obj;
-}
-
-HCED::HCED(USBEndpoint* ep) {
-    USBDeviceConnected* dev = ep->getDevice();
-    int devAddr = 0;
-    bool lowSpeed = false;
-    if (dev) {
-        devAddr = dev->getAddress();
-        lowSpeed = dev->getSpeed();
-    }
-    int ep_number = ep->getAddress();
-    int MaxPacketSize = ep->getSize();
-        Control =  devAddr        | /* USB address */
-        ((ep_number & 0x7F) << 7) | /* Endpoint address */
-        (ep_number!=0?(((ep_number&0x80)?2:1) << 11):0)| /* direction : Out = 1, 2 = In */
-        ((lowSpeed?1:0) << 13)    | /* speed full=0 low=1 */
-        (MaxPacketSize << 16);      /* MaxPkt Size */
-        TailTd = NULL;
-        HeadTd = NULL;
-        Next = NULL;
-}
-