Simple USBHost library for Nucleo F446RE/F411RE/F401RE FRDM-KL46Z/KL25Z/F64F LPC4088/LPC1768

Dependencies:   FATFileSystem

Dependents:   F401RE-BTstack_example F401RE-USBHostMSD_HelloWorld

Fork of KL46Z-USBHost by Norimasa Okamoto

簡易USBホストライブラリです。
official-USBHostの下位互換で対応プログラムを僅かな修正で動かすことが出来ます。

Platforms

  • Nucleo F446RE
  • Nucleo F411RE
  • Nucleo F401RE
  • FRDM-K64F
  • FRDM-KL46Z
  • FRDM-KL25Z
  • LPC4088
  • LPC1768

Nucleo F446RE/F411RE/F401REのUSB接続方法

ST morphoUSB
U5V (CN10-8)VBUS (1 RED)
PA11 (CN10-14)DM  (2 WHITE)
PA12 (CN10-12)DP  (3 GREEN)
GND (CN10-20)GND (4 BLACK)

Examples

Import programF446RE-USBHostMouse_HelloWorld

USBHostMouse Hello World for ST-Nucleo-F446RE

Import programF401RE-USBHostMSD_HelloWorld

Simple USBHost MSD(USB flash drive) for Nucleo F401RE/FRDM-KL46Z test program

Import programF401RE-USBHostC270_example

Simple USBHost WebCam test program

Import programK64F_USBHostC270_example

Simple USBHost C270 example

Import programF401RE-BTstack_example

BTstack for Nucleo F401RE/FRDM-KL46Z example program

Import programUSBHostRSSI_example

Bluetooth device discovery example program.

Import programKL46Z-USBHostGPS_HelloWorld

Simple USBHost GPS Dongle Receiver for FRDM-KL46Z test program

Revision:
12:b91fdea8c0a7
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHost/USBHostTypes.h	Mon Jun 09 09:01:10 2014 +0000
@@ -0,0 +1,167 @@
+/* mbed USBHost Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef USB_INC_H
+#define USB_INC_H
+
+#include "mbed.h"
+#include "toolchain.h"
+
+enum USB_TYPE {
+    USB_TYPE_OK = 0,
+
+    // completion code
+    USB_TYPE_CRC_ERROR = 1,
+    USB_TYPE_BIT_STUFFING_ERROR = 2,
+    USB_TYPE_DATA_TOGGLE_MISMATCH_ERROR = 3,
+    USB_TYPE_STALL_ERROR = 4,
+    USB_TYPE_DEVICE_NOT_RESPONDING_ERROR = 5,
+    USB_TYPE_PID_CHECK_FAILURE_ERROR = 6,
+    USB_TYPE_UNEXPECTED_PID_ERROR = 7,
+    USB_TYPE_DATA_OVERRUN_ERROR = 8,
+    USB_TYPE_DATA_UNDERRUN_ERROR = 9,
+    USB_TYPE_RESERVED = 9,
+    USB_TYPE_RESERVED_ = 10,
+    USB_TYPE_BUFFER_OVERRUN_ERROR = 12,
+    USB_TYPE_BUFFER_UNDERRUN_ERROR = 13,
+
+    // general usb state
+    USB_TYPE_DISCONNECTED = 14,
+    USB_TYPE_FREE = 15,
+    USB_TYPE_IDLE = 16,
+    USB_TYPE_PROCESSING = 17,
+
+    USB_TYPE_ERROR = 18,
+};
+
+
+enum ENDPOINT_DIRECTION {
+    OUT = 1,
+    IN
+};
+
+enum ENDPOINT_TYPE {
+    CONTROL_ENDPOINT = 0,
+    ISOCHRONOUS_ENDPOINT,
+    BULK_ENDPOINT,
+    INTERRUPT_ENDPOINT
+};
+
+#define AUDIO_CLASS     0x01
+#define CDC_CLASS       0x02
+#define HID_CLASS       0x03
+#define MSD_CLASS       0x08
+#define HUB_CLASS       0x09
+#define SERIAL_CLASS    0x0A
+
+#define  DEVICE_DESCRIPTOR                     (1)
+#define  CONFIGURATION_DESCRIPTOR              (2)
+#define  INTERFACE_DESCRIPTOR                  (4)
+#define  ENDPOINT_DESCRIPTOR                   (5)
+#define  HID_DESCRIPTOR                        (33)
+
+//  ----------- Control RequestType Fields  ----------- 
+#define  USB_DEVICE_TO_HOST         0x80
+#define  USB_HOST_TO_DEVICE         0x00
+#define  USB_REQUEST_TYPE_CLASS     0x20
+#define  USB_REQUEST_TYPE_STANDARD  0x00
+#define  USB_RECIPIENT_DEVICE       0x00
+#define  USB_RECIPIENT_INTERFACE    0x01
+#define  USB_RECIPIENT_ENDPOINT     0x02
+
+// -------------- USB Standard Requests  -------------- 
+#define  GET_STATUS                 0x00
+#define  SET_FEATURE                0x03
+#define  SET_ADDRESS                0x05
+#define  GET_DESCRIPTOR             0x06
+#define  SET_CONFIGURATION          0x09
+#define  SET_INTERFACE              0x0b
+#define  CLEAR_FEATURE              0x01
+
+// -------------- USB Descriptor Length  -------------- 
+#define DEVICE_DESCRIPTOR_LENGTH            0x12
+#define CONFIGURATION_DESCRIPTOR_LENGTH     0x09
+
+// PID
+#define DATA0 0x03
+#define DATA1 0x0b
+#define ACK   0x02
+#define STALL 0x0e
+#define NAK   0x0a
+
+#pragma pack(push,1)
+typedef struct {
+    uint8_t bLength;            
+    uint8_t bDescriptorType;    
+    uint16_t bcdUSB;            
+    uint8_t bDeviceClass;       
+    uint8_t bDeviceSubClass;    
+    uint8_t bDeviceProtocol;    
+    uint8_t bMaxPacketSize;     
+    uint16_t idVendor;          
+    uint16_t idProduct;         
+    uint16_t bcdDevice;         
+    uint8_t iManufacturer;      
+    uint8_t iProduct;           
+    uint8_t iSerialNumber;      
+    uint8_t bNumConfigurations; 
+} PACKED DeviceDescriptor;
+
+typedef struct {
+    uint8_t bLength;               
+    uint8_t bDescriptorType;       
+    uint16_t wTotalLength;         
+    uint8_t bNumInterfaces;        
+    uint8_t bConfigurationValue;   
+    uint8_t iConfiguration;        
+    uint8_t bmAttributes;          
+    uint8_t bMaxPower;             
+} PACKED ConfigurationDescriptor; 
+
+typedef struct {
+    uint8_t bLength;                 
+    uint8_t bDescriptorType;   
+    uint8_t bInterfaceNumber;  
+    uint8_t bAlternateSetting; 
+    uint8_t bNumEndpoints;     
+    uint8_t bInterfaceClass;   
+    uint8_t bInterfaceSubClass;
+    uint8_t bInterfaceProtocol;
+    uint8_t iInterface;        
+} InterfaceDescriptor; 
+
+typedef struct {
+    uint8_t bLength;          
+    uint8_t bDescriptorType;  
+    uint8_t bEndpointAddress; 
+    uint8_t bmAttributes;     
+    uint16_t wMaxPacketSize;  
+    uint8_t bInterval;        
+} EndpointDescriptor;
+
+typedef struct {
+    uint8_t bDescLength;      
+    uint8_t bDescriptorType;  
+    uint8_t bNbrPorts;        
+    uint16_t wHubCharacteristics;
+    uint8_t bPwrOn2PwrGood;   
+    uint8_t bHubContrCurrent; 
+    uint8_t DeviceRemovable;  
+    uint8_t PortPweCtrlMak;   
+} HubDescriptor;              
+#pragma pack(pop)
+
+#endif