Diff: targets/TARGET_Maxim/TARGET_MAX32620C/mxc/lp.c

Revision:

186:707f6e361f3e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32620C/mxc/lp.c	Fri Jun 22 16:45:37 2018 +0100
@@ -0,0 +1,414 @@
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-06-03 13:37:31 -0500 (Fri, 03 Jun 2016) $
+ * $Revision: 23186 $
+ * ******************************************************************************/
+
+/***** Includes *****/
+#include "mxc_config.h"
+#include "mxc_assert.h"
+#include "lp.h"
+#include "ioman_regs.h"
+#include "uart_regs.h"
+
+/***** Definitions *****/
+
+#ifndef LP0_PRE_HOOK
+#define LP0_PRE_HOOK
+#endif
+#ifndef LP1_PRE_HOOK
+#define LP1_PRE_HOOK
+#endif
+#ifndef LP1_POST_HOOK
+#define LP1_POST_HOOK
+#endif
+
+/***** Globals *****/
+
+/***** Functions *****/
+
+/* Clear all wake-up configuration */
+void LP_ClearWakeUpConfig(void)
+{
+    /* Clear GPIO WUD event and configuration registers, globally */
+    MXC_PWRSEQ->reg1 |= (MXC_F_PWRSEQ_REG1_PWR_CLR_IO_EVENT_LATCH |
+                         MXC_F_PWRSEQ_REG1_PWR_CLR_IO_CFG_LATCH);
+    MXC_PWRSEQ->reg1 &= ~(MXC_F_PWRSEQ_REG1_PWR_CLR_IO_EVENT_LATCH |
+                          MXC_F_PWRSEQ_REG1_PWR_CLR_IO_CFG_LATCH);
+
+    /* Mask off all wake-up sources */
+    MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_MSK_FLAGS_PWR_IOWAKEUP |
+                               MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_PLUG_WAKEUP |
+                               MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_REMOVE_WAKEUP |
+                               MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR0 |
+                               MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR1 |
+                               MXC_F_PWRSEQ_MSK_FLAGS_RTC_PRESCALE_CMP |
+                               MXC_F_PWRSEQ_MSK_FLAGS_RTC_ROLLOVER);
+}
+
+/* Clear wake-up flags */
+unsigned int LP_ClearWakeUpFlags(void)
+{
+    unsigned int flags_tmp;
+
+    /* Get flags */
+    flags_tmp = MXC_PWRSEQ->flags;
+
+    /* Clear GPIO WUD event registers, globally */
+    MXC_PWRSEQ->reg1 |= (MXC_F_PWRSEQ_REG1_PWR_CLR_IO_EVENT_LATCH);
+    MXC_PWRSEQ->reg1 &= ~(MXC_F_PWRSEQ_REG1_PWR_CLR_IO_EVENT_LATCH);
+
+    /* Clear power sequencer event flags (write-1-to-clear) */
+    MXC_PWRSEQ->flags = flags_tmp;
+
+    return flags_tmp;
+}
+
+/* Configure the selected pin for wake-up detect */
+int LP_ConfigGPIOWakeUpDetect(const gpio_cfg_t *gpio, unsigned int act_high, lp_pu_pd_select_t wk_pu_pd)
+{
+    int result = E_NO_ERROR;
+    unsigned int pin;
+
+    /* Check that port and pin are within range */
+    MXC_ASSERT(gpio->port < MXC_GPIO_NUM_PORTS);
+    MXC_ASSERT(gpio->mask > 0);
+
+    /* Ports 0-3 are controlled by wud_req0, while 4-7 are controlled by wud_req1 */
+    if (gpio->port < 4) {
+        MXC_IOMAN->wud_req0 |= (gpio->mask << (gpio->port << 3));
+        if (MXC_IOMAN->wud_ack0 != MXC_IOMAN->wud_req0) { /* Order of volatile access does not matter here */
+            result = E_BUSY;
+        }
+    } else if (gpio->port < 8) {
+        MXC_IOMAN->wud_req1 |= (gpio->mask << ((gpio->port - 4) << 3));
+        if (MXC_IOMAN->wud_ack1 != MXC_IOMAN->wud_req1) { /* Order of volatile access does not matter here */
+            result = E_BUSY;
+        }
+    } else {
+        return E_NOT_SUPPORTED;
+    }
+
+    if (result == E_NO_ERROR) {
+
+        for (pin = 0; pin < MXC_GPIO_MAX_PINS_PER_PORT; pin++) {
+
+            if (gpio->mask & (1 << pin)) {
+
+                /* Enable modifications to WUD configuration */
+                MXC_PWRMAN->wud_ctrl = MXC_F_PWRMAN_WUD_CTRL_CTRL_ENABLE;
+
+                /* Select pad in WUD control */
+                /* Note: Pads are numbered from 0-48; {0-7} => {P0.0-P0.7}, {8-15} => {P1.0-P1.7}, etc. */
+                MXC_PWRMAN->wud_ctrl |= (gpio->port * 8) + pin;
+
+                /* Configure sense level on this pad */
+                MXC_PWRMAN->wud_ctrl |= (MXC_E_PWRMAN_PAD_MODE_ACT_HI_LO << MXC_F_PWRMAN_WUD_CTRL_PAD_MODE_POS);
+
+                if (act_high) {
+                    /* Select active high with PULSE0 (backwards from what you'd expect) */
+                    MXC_PWRMAN->wud_pulse0 = 1;
+                } else {
+                    /* Select active low with PULSE1 (backwards from what you'd expect) */
+                    MXC_PWRMAN->wud_pulse1 = 1;
+                }
+
+                /* Clear out the pad mode */
+                MXC_PWRMAN->wud_ctrl &= ~(MXC_F_PWRMAN_WUD_CTRL_PAD_MODE);
+
+                /* Select this pad to have the wake-up function enabled */
+                MXC_PWRMAN->wud_ctrl |= (MXC_E_PWRMAN_PAD_MODE_CLEAR_SET << MXC_F_PWRMAN_WUD_CTRL_PAD_MODE_POS);
+
+                /* Activate with PULSE1 */
+                MXC_PWRMAN->wud_pulse1 = 1;
+
+                if (wk_pu_pd != LP_NO_PULL) {
+                    /* Select weak pull-up/pull-down on this pad while in LP1 */
+                    MXC_PWRMAN->wud_ctrl |= (MXC_E_PWRMAN_PAD_MODE_WEAK_HI_LO << MXC_F_PWRMAN_WUD_CTRL_PAD_MODE_POS);
+
+                    /* Again, logic is opposite of what you'd expect */
+                    if (wk_pu_pd == LP_WEAK_PULL_UP) {
+                        MXC_PWRMAN->wud_pulse0 = 1;
+                    } else {
+                        MXC_PWRMAN->wud_pulse1 = 1;
+                    }
+                }
+
+                /* Disable configuration each time, required by hardware */
+                MXC_PWRMAN->wud_ctrl = 0;
+            }
+        }
+    }
+
+    /* Disable configuration */
+    MXC_IOMAN->wud_req0 = 0;
+    MXC_IOMAN->wud_req1 = 0;
+
+    /* Enable IOWakeup, as there is at least 1 GPIO pin configured as a wake source */
+    MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_MSK_FLAGS_PWR_IOWAKEUP;
+
+    return result;
+}
+
+int LP_IsGPIOWakeUpSource(const gpio_cfg_t *gpio)
+{
+    uint8_t gpioWokeUp = 0;
+
+    /* Check that port and pin are within range */
+    MXC_ASSERT(gpio->port < MXC_GPIO_NUM_PORTS);
+    MXC_ASSERT(gpio->mask > 0);
+
+    /* Ports 0-3 are wud_seen0, while 4-7 are wud_seen1*/
+    if (gpio->port < 4) {
+        gpioWokeUp = (MXC_PWRMAN->wud_seen0 >> (gpio->port << 3)) & gpio->mask;
+    } else if (gpio->port < 8) {
+        gpioWokeUp = (MXC_PWRMAN->wud_seen1 >> ((gpio->port - 4) << 3)) & gpio->mask;
+    } else {
+        return E_NOT_SUPPORTED;
+    }
+
+    return gpioWokeUp;
+}
+
+int LP_ClearGPIOWakeUpDetect(const gpio_cfg_t *gpio)
+{
+    int result = E_NO_ERROR;
+    unsigned int pin;
+
+    /* Check that port and pin are within range */
+    MXC_ASSERT(gpio->port < MXC_GPIO_NUM_PORTS);
+    MXC_ASSERT(gpio->mask > 0);
+
+    /* Ports 0-3 are controlled by wud_req0, while 4-7 are controlled by wud_req1*/
+    if (gpio->port < 4) {
+        MXC_IOMAN->wud_req0 |= (gpio->mask << (gpio->port << 3));
+        if (MXC_IOMAN->wud_ack0 != MXC_IOMAN->wud_req0) { /* Order of volatile access does not matter here */
+            result = E_BUSY;
+        }
+    } else if (gpio->port < 8) {
+        MXC_IOMAN->wud_req1 |= (gpio->mask << ((gpio->port - 4) << 3));
+        if (MXC_IOMAN->wud_ack1 != MXC_IOMAN->wud_req1) { /* Order of volatile access does not matter here */
+            result = E_BUSY;
+        }
+    } else {
+        return E_NOT_SUPPORTED;
+    }
+
+    if (result == E_NO_ERROR) {
+        for (pin = 0; pin < MXC_GPIO_MAX_PINS_PER_PORT; pin++) {
+            if (gpio->mask & (1 << pin)) {
+
+                /* Enable modifications to WUD configuration */
+                MXC_PWRMAN->wud_ctrl = MXC_F_PWRMAN_WUD_CTRL_CTRL_ENABLE;
+
+                /* Select pad in WUD control */
+                /* Note: Pads are numbered from 0-48; {0-7} => {P0.0-P0.7}, {8-15} => {P1.0-P1.7}, etc. */
+                MXC_PWRMAN->wud_ctrl |= (gpio->port * 8) + pin;
+
+                /* Clear out the pad mode */
+                MXC_PWRMAN->wud_ctrl &= ~(MXC_F_PWRMAN_WUD_CTRL_PAD_MODE);
+
+                /* Select the wake up function on this pad */
+                MXC_PWRMAN->wud_ctrl |= (MXC_E_PWRMAN_PAD_MODE_CLEAR_SET << MXC_F_PWRMAN_WUD_CTRL_PAD_MODE_POS);
+
+                /* disable wake up with PULSE0 */
+                MXC_PWRMAN->wud_pulse0 = 1;
+
+                /* Disable configuration each time, required by hardware */
+                MXC_PWRMAN->wud_ctrl = 0;
+            }
+        }
+    }
+
+    /* Disable configuration */
+    MXC_IOMAN->wud_req0 = 0;
+    MXC_IOMAN->wud_req1 = 0;
+
+    return result;
+}
+
+int LP_ConfigUSBWakeUp(unsigned int plug_en, unsigned int unplug_en)
+{
+    /* Enable or disable wake on USB plug-in */
+    if (plug_en) {
+        MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_PLUG_WAKEUP;
+    } else {
+        MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_PLUG_WAKEUP);
+    }
+
+    /* Enable or disable wake on USB unplug */
+    if (unplug_en) {
+        MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_REMOVE_WAKEUP;
+    } else {
+        MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_REMOVE_WAKEUP);
+    }
+
+    return E_NO_ERROR;
+}
+
+int LP_ConfigRTCWakeUp(unsigned int comp0_en, unsigned int comp1_en,
+               unsigned int prescale_cmp_en, unsigned int rollover_en)
+{
+    /* Note: MXC_PWRSEQ.pwr_misc[0] should be set to have the mask be active low */
+
+    /* Enable or disable wake on RTC Compare 0 */
+    if (comp0_en) {
+        MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_FLAGS_RTC_CMPR0;
+
+    } else {
+        MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_FLAGS_RTC_CMPR0);
+    }
+
+    /* Enable or disable wake on RTC Compare 1 */
+    if (comp1_en) {
+        MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_FLAGS_RTC_CMPR1;
+
+    } else {
+        MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_FLAGS_RTC_CMPR1);
+    }
+
+    /* Enable or disable wake on RTC Prescaler */
+    if (prescale_cmp_en) {
+        MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_FLAGS_RTC_PRESCALE_CMP;
+
+    } else {
+        MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_FLAGS_RTC_PRESCALE_CMP);
+    }
+
+    /* Enable or disable wake on RTC Rollover */
+    if (rollover_en) {
+        MXC_PWRSEQ->msk_flags |= MXC_F_PWRSEQ_FLAGS_RTC_ROLLOVER;
+
+    } else {
+        MXC_PWRSEQ->msk_flags &= ~(MXC_F_PWRSEQ_FLAGS_RTC_ROLLOVER);
+    }
+
+    return E_NO_ERROR;
+}
+
+
+int LP_EnterLP2(void)
+{
+    /* Clear SLEEPDEEP bit to avoid LP1/LP0 entry*/
+    SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
+
+    /* Go into LP2 mode and wait for an interrupt to wake the processor */
+    __WFI();
+
+    return E_NO_ERROR;
+}
+
+int LP_EnterLP1(void)
+{
+    /* Turn on retention controller */
+    MXC_PWRSEQ->retn_ctrl0 |= MXC_F_PWRSEQ_RETN_CTRL0_RETN_CTRL_EN;
+
+    /* Clear the firstboot bit, which is generated by a POR event and locks out LPx modes */
+    MXC_PWRSEQ->reg0 &= ~(MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT);
+
+    /* Set the LP1 select bit so CPU goes to LP1 during SLEEPDEEP */
+    MXC_PWRSEQ->reg0 |= MXC_F_PWRSEQ_REG0_PWR_LP1;
+
+    /* The SLEEPDEEP bit will cause a WFE() to trigger LP0/LP1 (depending on ..._REG0_PWR_LP1 state) */
+    SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+    /* Performance-measurement hook, may be defined as nothing */
+    LP1_PRE_HOOK;
+
+    /* Dummy read to make sure SSB writes are complete */
+    MXC_PWRSEQ->reg0;
+
+    /* Enter LP1 -- sequence is per instructions from ARM, Ltd. */
+    __SEV();
+    __WFE();
+    __WFE();
+
+    /* Performance-measurement hook, may be defined as nothing */
+    LP1_POST_HOOK;
+
+    /* Clear SLEEPDEEP bit */
+    SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
+
+    /* No error */
+    return E_NO_ERROR;
+}
+
+void LP_EnterLP0(void)
+{
+    /* Turn off Auto GPIO Freeze/UnFreeze in sleep modes */
+    MXC_PWRSEQ->reg1 &= ~MXC_F_PWRSEQ_REG1_PWR_AUTO_MBUS_GATE;
+
+    /* Disable interrupts, ok not to save state as exit LP0 is a reset */
+    __disable_irq();
+
+    /* Clear the firstboot bit, which is generated by a POR event and locks out LPx modes */
+    MXC_PWRSEQ->reg0 &= ~(MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT);
+
+    /* Turn off retention controller */
+    MXC_PWRSEQ->retn_ctrl0 &= ~(MXC_F_PWRSEQ_RETN_CTRL0_RETN_CTRL_EN);
+
+    /* Turn off retention regulator */
+    MXC_PWRSEQ->reg0 &= ~(MXC_F_PWRSEQ_REG0_PWR_RETREGEN_RUN | MXC_F_PWRSEQ_REG0_PWR_RETREGEN_SLP);
+
+    /* LP0 ONLY to eliminate ~50nA of leakage on VDD12 */
+    MXC_PWRSEQ->reg1 |= MXC_F_PWRSEQ_REG1_PWR_SRAM_NWELL_SW;
+
+    /* Clear the LP1 select bit so CPU goes to LP0 during SLEEPDEEP */
+    MXC_PWRSEQ->reg0 &= ~(MXC_F_PWRSEQ_REG0_PWR_LP1);
+
+    /* The SLEEPDEEP bit will cause a WFE() to trigger LP0/LP1 (depending on ..._REG0_PWR_LP1 state) */
+    SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+    /* Performance-measurement hook, may be defined as nothing */
+    LP0_PRE_HOOK;
+
+    /* Freeze GPIO using MBUS so that it doesn't change while digital core is alseep */
+    MXC_PWRSEQ->reg1 |= MXC_F_PWRSEQ_REG1_PWR_MBUS_GATE;
+
+    /* Dummy read to make sure SSB writes are complete */
+    MXC_PWRSEQ->reg0;
+
+    /* Go into LP0 -- sequence is per instructions from ARM, Ltd. */
+    __SEV();
+    __WFE();
+    __WFE();
+
+    /* Catch the case where this code does not properly sleep */
+    /* Unfreeze the GPIO by clearing MBUS_GATE (always safe to do) */
+    MXC_PWRSEQ->reg1 &= ~(MXC_F_PWRSEQ_REG1_PWR_MBUS_GATE);
+    MXC_ASSERT_FAIL();
+    while (1) {
+        __NOP();
+    }
+
+    /* Does not actually return */
+}