Diff: EncoderMspInitF3.cpp

Revision:

7:cd502aeab71a

Parent:

6:11dea4c204ba

--- a/EncoderMspInitF3.cpp	Fri Oct 14 13:38:48 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-#include "mbed.h"
-/*
- * HAL_TIM_Encoder_MspInit()
- * Overrides the __weak function stub in stm32f3xx_hal_tim.h
- *
- * Edit the below for your preferred pin wiring & pullup/down
- * I have encoder common at 3V3, using GPIO_PULLDOWN on inputs.
- * Encoder A&B outputs connected directly to GPIOs.
- *
- * http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00093333.pdf
- * http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00097745.pdf
- * http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00133117.pdf
- * Table 14 has GPIO alternate function pinout mappings.
- *
- * TIM1_CH1: AF2 @ PC_0, PE_9; AF6 @ PA_8
- * TIM1_CH2: AF2 @ PC_1, PE_11; AF6 @ PA_9
- *
- * (TIM2_CH1: AF1 @ PA_0, PA_5, PA_15; AF2 @ PD_3)  TIM2 is the mbed system ticker, so unavailable as encoder.
- * (TIM2_CH2: AF1 @ PA_1, PB_3; AF2 @ PD_4)
- *
- * TIM3_CH1: AF2 @ PA_6, PB_4, PC_6, PE_2           not for F302R8, OK @ F334R8
- * TIM3_CH2: AF2 @ PA_4, PA_7, PB_5, PC_7, PE_3
- *
- * TIM4_CH1: AF2 @ PB_6, PD_12; AF10 @ PA_11        not for both F302R8 & F334R8
- * TIM4_CH2: AF2 @ PB_7, PD_13; AF10 @ PA_12
- *
- */
-
-#ifdef TARGET_STM32F3
-
-void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
-{
-    GPIO_InitTypeDef GPIO_InitStruct;
-
-    if (htim->Instance == TIM1) { //PA8 PA9 = Nucleo D7 D8
-        __TIM1_CLK_ENABLE();
-        __GPIOA_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-        GPIO_InitStruct.Alternate = GPIO_AF6_TIM1;
-        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    }
-#if 0 //TIM2 is the mbed system ticker
-    else if (htim->Instance == TIM2) { //PA0 PA1 = Nucleo A0 A1
-        __TIM2_CLK_ENABLE();
-        __GPIOA_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-        GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
-        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    }
-#endif
-#if defined TARGET_STM32F334R8
-    else if (htim->Instance == TIM3) { //PB4 PB5 = Nucleo D5 D4
-        __TIM3_CLK_ENABLE();
-        __GPIOB_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_4 | GPIO_PIN_5;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-        GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
-        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-    }
-#endif
-#if 0
-    else if (htim->Instance == TIM4) { // PB6 PB7 = Nucleo D10 MORPHO_PB7
-        __TIM4_CLK_ENABLE();
-        __GPIOB_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-        GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
-        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-    }
-#endif
-}
-#endif
\ No newline at end of file